Opening the arrange window ... Track header

Ok so I'm trying to get more efficient with logic and one thing I would like to know is why when I push apple key one and I open the arrange window
Even if I've gone into the arrange window in this song and I've set it up to display all header options , meaning track protect , freeze solo mute etc.... ,
Steven though I've gone through this process and I close that window ... Or even in a new arrange window on top of the correctly set window
Logic gives me an arrange window without these settings make me constantly have to got into view drop down and setting this up again
It's very frustrating and I'd like to know a work around
It's been a long time but when I started using logic six I believe there was a way to set this up by setting up the arrange and then using a key command
To capture the window
If that's correct I forget how to do it and would like some help
Thanks

Theodore Becker wrote:
Yea so locking my screen set doesn't work the track header ie the freeze button and protect button still don't appear in a new arrange even after setting lock from the screen set pulldown
Hi
Yep.... as I said, if you open a new Arrange window each time it will be at the default setup (see below for another method that may fix this for you)
The idea of Screensets is that you "re-open" 'your' Arrange (or other window setup) by recalling the Screenset, NOT opening a new Arrange window.
Try this:
Get the Arrange the way you'd like it, and then Lock the Screenset. (Note the Screenset number next to the Screenset Menu eg screenset 1). Change the Arrange layout, and then recall the Locked Screenset using the number keys (eg 1). The Arrange will reopen the way you locked it.
Alternatively, try this:
Open a new project and setup the Arrange Track Headers, open a second Arrange and setup these headers too. Close the second Arrange window. Now make a new (third) Arrange window... it will have the headers the way you set them, as will all new Arrange windows (works here on Logic 9.1.6 and OSX.7.2).
CCT

Similar Messages

  • I can't select "audio output stereo" on a track in the arrange window

    When I create a new song, in the Arrange window I can
    choose "audio output stereo" for a given track, and
    access the mixer's output from there. Fab.
    When I open a song that I oringally created using Logic 5,
    "audio output stereo" does not appear.
    Is this something about the file format?
    (a) is there something simple to do to enable that for
    older songs, or (b) is there a way to convert older song files to LE7?
    thanks,
    fred, san rafael.
    [email protected]

    Sorry, je suis un idiot.
    FYI. I went into the Environment window and found "Output 1-2"
    to be un-checked. Checking it now makes "audio output stero" an available option in that song.
    Thanks for listening.
    fred

  • Any harm in having over 1000 midi tracks in the arrange window?

    The way i like to work is...
    to load up like 20 instances of a software sampler, (16 channels on each) and then create tracks for every midi channel in the arrange window. That way, when i'm writing, i can simply switch tracks to play different midi sounds.
    Last night I spent hours creating all the tracks, but after I reached 1000, it just says "???" in the track number area. I was still able to create the tracks though, and everything seemed fine.
    I should mention that I'm still waiting for the Intel Machfive version, so i can't test it yet.
    So my question is, is there a problem for me to have so many tracks in the arrange window?

    oh, and one more thing. it said "???" in the arrange window, but it showed the track number in the mixer. This is a good sign, right?

  • I have an issue with the latest project i am working on. When i open the file, the arrange window fails to open

    Really strange issue. Only on one project.
    If i open the file, i can see logic running through the list of instruments, but the only window that opens is the fixed note length Midi transform window. I cant see the arrange window anywhere!
    If i khit play on my midi controller keyboard, i can play the project and hear everything as it should be, but just cant see the arrangement.
    If i attempt to close the Midi transform window, it wants to close the who project.
    Any ideas on what i do!?
    Thanks

    Thanks, but i'd already tried that and it didnt work.
    I have managed to fix it though, and for anyone else with the same issue, here is what i did:
    Find your Logic project file
    Right Click on the project, and choose 'Show Contents'
    Open the displayed folder 'LgDoc'
    Remove the file 'displayState'
    open the project, and all should be good!

  • Is there a quick way to "fit all" in the arrange window?

    Does LP8 have a quick way to fit everything in the arrange window from any magnification level? Something comparable to double-clicking on the magnifying glass in Pro Tools?
    For instance, let's say you've made your tracks very tall by control-down-arrowing a bunch of times. Now you want to quickly go back to having every track header showing in the arrange window. At first I thought that the key command "control-option-z" (zoom to fit selection horizontally and vertically) would work if you command-a selected all regions first. That does work horizontally, but if I have a region at the bottom of my track headers, that command does not seem to work vertically. The region at the bottom is still out of view.
    One thing I tried was going to the key commands dialogue box and assigning option-2 to "save as zoom 1" and option-3 as "recall zoom 1." But when I start with everything visible in the arrange window, then hit option-2 to save that zoom level, then use the magnifying glass a bunch of times to make everything big, then hit option-3, it does not take me back to the original zoom level that I "saved" as option-2.
    If the only way to get back to square one is to start there, then control-option-marquee-select to magnify a few times, then control-option-click on the background the same number of times to get back to where you started, well, OK, I will live with that.
    But I am thinking there must be an easy way to "fit everything in window" with just one click, or maybe some kind of key-modified click.
    Any advice much appreciated,
    Jim

    OK, thanks for the advice, Erik. I was hoping not to have to use the zoom sliders or the stretch scrollbars method, since it's not as fast as a one-click or double-click method.
    One other possibility I was investigating today was saving a screenshot and then recalling it. The manual says:
    Saving and Recalling Screensets
    Screensets are numbered from 1 to 99 (using only the 1 to 9 computer keys—the 0 key
    is assigned to the Stop command by default).
    You don’t need to save screensets with an explicit command. It happens automatically,
    as soon as you switch to another screenset. Thus, without any effort, your current
    working view is always stored as the current screenset.
    To create a screenset:
    1 Press a numerical key, say 7.
    For two-digit screensets, hold down Control while entering the first digit.
    2 Arrange your windows as desired, including changes to zoom settings, relationship of
    the Arrange area and editor areas, open or closed Inspector and Media or Lists areas,
    and so on.
    To recall, or switch between screensets, do one of the following:
    m Input the number of the desired screenset (1 to 9).
    I thought that had real possibilities. Make the arrange window the size of my whole project to begin with, then save it as, say, screenset 3. Then if I zoom in on a wave form or change the size of everything, just recall screenset 3 to get back. Unfortunately, it apparently constantly keeps track of all your changes, so if you zoom within screenset 3 and then try to recall the screenset 3 that you saved, it just takes you to where you are currently, after all the zooming. I don't understand why Logic thinks that helps you, but that's how it seems to work.
    Anyway, I've spent enough time on it. I give up. I guess I will use control-left-arrow, control-right-arrow. Unfortunately, you cannot do them both at the same time, it seems, which would be faster. Oh, well.

  • Creating Apple loops within the arrange window

    I have tried this before and had the same result again and again.
    I have a stereo recording of a drum kit at 120 bpm which I have chopped to a 2 bar cycle and want to turn it into an apple loop. to fit it into the song I am working on which is at 100 bpm.
    I select "add to apple loops library" from the Region drop down menu in the arrange window. the apple loops genre selection window opens which adds it to the apple loops browser. easy!
    But when I drop the loop back into the arrange window onto an Audio track within the same song which is 100bpm, it stays at the original tempo and doesn't snap to the bar. but still loops stretches and does what an apple loop should do but at the wrong tempo. what is that all about?

    with an extra note to my comment above
    if you've dropped the loop from the apple loop browser to the arrange window you then have to open it again in apple loop utility to sort it out by selecting "open in apple utility" from the Audio drop down menu on the arrange window which gives you a chance to edit it properly and now I have a decent loop. but then I have to save it again in the initial menu "add to apple loops" which I have to reclassify it again I thought it'd be a good idea to actually get rid of the first menu choice "add to apple loops" window and just have a window within logic which uses the same engine as apple loops utility and uses the same audio channel (the Last enabled channel in the Environment to Audition the loop because now when Apple loop utility opens the core Audio gets confused and comes out of my comuter speaker and then after a few cycles comes out of the Interface. I think there are too many "menu this", "loop utility that's" going on in logic. I do hope Logic 8 is going to trim away all the excess Lard which Logic has gained since mac took it off Emagic.

  • How to find a region in the Arrange Window

    I'm trying to find two audio files that are apparently in regions in my arrange window on Logic 9.  I can see them in my Audio Bin but I have no idea where to find them in my Arrange Window.  I don't know if they're wedged in between or underneath a hundreds of other regions (yes I have that many regions). 
    Is there a method or shortkey I can use to find these specific regions?  You know...like a "control F" for regions in the Arrange Window?  Ideally I want to get rid of these files but I don't want to have any "ghost regions" that might complicate things.  I just like to have everything nice and clean.
    Thanks for any help.
    p.s. In case someone asks these questions I already have answers:
    Q1: Why can't you just find the regions you're looking for manually?
    A1: Because I have too many regions in my Arrange Window.
    Q2: Why do you have so many regions?
    A2: Because that's how I work.  The number of regions I have shouldn't be related to the efficiency of looking for specific regions. 

    You could check if the regions may exist inside a take folder, a normal folder, or press H to see if you have any hidden tracks.
    But if you are brave enough to try to soft-delete all the other regions from the Bin, it should be easy to find the two remaing ones in the Arrange window, unless you also have a lot of MIDI regions. What happens if you select all the regions in the Audio Bin (Command-A), Shift-click on the two regions you talk about to deselect them, and then (temp.) delete all the regions in the bin? You can Undo this afterwards, but NB: remember to select "Keep" (and "for all") if you are asked whether you also want to delete the recordings from the hard disc itself.
    "Zoom To Selection": select a region (not a file) in the Bin, activate Arrange (eg by pressing tab one of more times until Arrange has a white-ish frame), and then press Z on your keyboard. This will zoom in on the selected region, another Z will show the whole arrangement again.
    "Play from Selection": press Shift and Enter.

  • My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

    My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

    Try the waveform zoom slider. Recording louder just to get a better visible waveform would be, well, silly.
    From the manual: (click on links to see pics)
    To change the zoom level using the Waveform Zoom button 
    Click-hold the Waveform Zoom button. A slider appears.
    http://documentation.apple.com/en/logicpro/usermanual/Art/S01/S0185_WaveZoom.png
    Drag the slider. As you do, the waveform shown in all audio regions, and in the Beat Mapping track, is increased or decreased in size.
    http://documentation.apple.com/en/logicpro/usermanual/Art/S09/S0931_CUS_Waveform Zoom2.png 
    Note: This is a purely visual function. The amplitude (level) of the waveform is not affected.
    it's here (scroll 3/4 down):
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=4%26sec tion=6%26tasks=true

  • In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?

    In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?  This is the way I scrolled for MIDI editing on Logic 9

    Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
    it's here where one can configure a mouse device.
    Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
    Have a nice day!

  • When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....

    When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....
    Could some one give help and let me know where I can probably find the settings option that allows me to change and switch to previous situation where it was possible to decide time to time how to proceed either opening the file or saving it ??
    Thanks in advance
    David

    What is your operating system?
    Open a PDF from where?  If online, in what browser?

  • Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

    Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
    OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
    and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
    I can log on to the MS Exchange server and see the setup.
    What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
    or programs.
    What can I do?

    The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
    file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
    Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
    was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
    Follow the steps given below to resolve this problem
    1. Recover Navigation Pane configuration file
    2. Repair your Outlook PST file using Inbox Repair tool
    3. Create a new Outlook profil and import data from the old PST file
    4. Turn off Compatibility Mode
    5. Start Outlook in Safe Mode
    For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

  • How do I open the updates window in "Adobe Application Manager"?

    How do I open the updates window in "Adobe Application Manager"? Or can I or should I....??
    I am a brand new Cloud member.  I heard of the Retina update.  Assuming this was where the updates would logically appear I went to the "Adobe Application Manager" app first.  Without closing the "Adobe Application Manager" I opened Photoshop and went to the help menu and selected "Updates..."; a second window opened in the already open "Adobe Application Manager".
    I selected update all.
    The result is below:
    DW CS6 12.1 Creative Cloud
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Dreamweaver CS6 12.0.1 update to address critical issues
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop 13.1 for Creative Cloud
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe InDesign CS6 8.0.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Bridge CS6 5.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Illustrator CS6 Update (version 16.2.0)
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    DPS Desktop Tools CS6 2.05.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Dynamic Link Media Server CS6 1.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop Camera Raw 7.2
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Extension Manager 6.0.4 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Media Encoder CS6 6.0.2 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Now, I closed the "Adobe Application Manager" and opened "Photoshop" again and again selected "Updates..." from the help menu.  The "Adobe Application Manager" opened again with just one window this time and the updates happened correctly.
    I was hoping one of the updates would be to the "Adobe Application Manager", I don't think so.
    So, If I were you I wouldn't select "Updates..." from an Adobe app unless the "Adobe Application Manager" is closed until they fix it...
    Current version: Adobe® Application Manager - Version 7.0.0.128 (7.0.0.128) Note the Two windows in the "Adobe Application Manager" in the attached image.

    The updates are currently available by going to Help>Updates within the Application.  Once you invoke the Updater, which is a component of the Adobe Application Manager, it will locate and apply the updates.  It looks like most of your updates have failed to install.  I would recommend you begin by trying to apply the updates that are available on our product update page at http://www.adobe.com/downloads/updates/ and seeing if you face the same difficulty.
    If you continue to experience problems with applying the updates then please review your installation log to determine the cause of the failure.  You can find details on how to locate and interpret the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • How do I turn off the feature that opens the last window in an application

    Hello;
    I want to turn off the feature that opens the last window when I return to an application.
    Matt

    System Prefs > General > Last checkbox at the bottom.

  • Evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    evertime i open a secondary window in an application it opens on my laptop and I working on the application on my thunderbolt. what setting do i use to open the secondary window on the thunderbolt?

    ''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
    ''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
    EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

  • Where is the button to transfer sequences to the arrange window in Logic Pro 7's Ultrabeat?

    Hi guys/gals,
    I have a pretty old version of Logic, it's Pro 7. Anyway, I mess around with it from time to time and I am currently trying to program some drums using Ultrabeat, which, to be honest, I have totally ignored in the past.
    I have created a sequence and I now want to place it into the arrange window, but cannot find the button which, from everywhere I have searched, should be in the bottom left of the plug in, near the pattern selector drop down. I have taken a screenshot of how my Ultrabeat looks. If you can find this mysterious button then please let me know, as it is driving me nuts! I simply cannot find it anywhere.
    Thanks for your time.
    Archimbaldi.

    Hi
    This function was added in Logic Pro 7.2
    http://manuals.info.apple.com/en_US/New_Features_in_Logic_Pro_7.2.pdf
    page 98
    CCT

Maybe you are looking for