Opening the current screen of a application from portal in a new window

Hi,
We are using EP 7.0 with ECC 7. A Iview is created in portal for a ABAP webdynpro application and attached to a role and that role is attached to a user.
When the user invokes the Iview in portal the ABAP webdynpro application is opened, when a button is clicked in this first screen another screen is shown. From the second screen using portal functionality to open the contents of the screen I tried to open the second screen in new window by using the short cut "Open in new window", but this option opens the first screen instead of the current screen.
Is it a standard behaviour or some issue with this.
Is there anyother option to print the ABAP webdynpro application from portal
Regards,
H.K.Hayath Basha.

Hi H.K.Hayath Basha,
Try to put in Button action cod for open in new windows.
Regards
Eduardo

Similar Messages

  • Itunes application can not be open the disk can not be read from or writte

    itunes can not be opened the disk can not be read from or written to. That is the warning i get when i click my itunes to open it. Problem...
    there is no disk:) i have no idea what this warning means.. i have restarted and nothing.. i updated itunes and same warning.. there is no disk in the drive at all..
    infact i made sure i was in a room with no other disks.. Help??

    A few things to try:
    • Restore Permissions, using Disk Utility (in ~Applications/Utilities)
    • Set the correct Ownership & Permissions for the iTunes folder:
    Select the iTunes folder in ~/Users/YourUsername/Music.
    Get Info (command-I).
    Expand 'Ownership & Permissions' and 'Details:'
    You must read: 'You can Read & Write': if not, change it.
    Click on the 'Apply to enclosed items...' button.
    Hope this helps.
    M

  • Hi:  When I open my iPhoto the popup shows up and I don't know how to correct it.  Here is the popup "The current screen resolution is not optimal for iPhoto?" Can you help

    When I open my iPhoto a popup shows up and I don't know how to correct it the popup:
    "The current screen resoulation is not optimal for iPhotp"?
    Can you help?

    Go to the System/Accesability preference pane and enable the Zoom capability either with keystrokes or Magic Mouse:
    See if that will work for you.
    OT

  • After target display mode, iPhoto reports an error, "The current screen resolution is not optimal for iPhoto."

    I have the 27-inch (late 2009) iMac with mini-Display port input. Whenever I return from Target Display Mode, I get the attached error message and iPhoto becomes unresponsive (the window is still active, but clicking on it produces the error/warning system sound), I have to Force Quit it. The current screen resolution is not optimal for iPhoto (sometimes the error message is a little off the screen in the lower left and only the top of the window can be seen. This also seems to affect iTunes at the same time (by resizing the window to be super small), but without the error message or unresponsiveness.
    Has anyone else gotten this problem, and or might know of a fix?

    Yes, I have the same problem.  I have checked the resolution in Sysyem Preferences - display and it is properly set to the highest resolution (which is recommended).  I have no idea why this is ocurring but it is annoying.

  • Debugging the webdynpro abap application from portal.

    I  developed a  WebDynpro  application and integrated in portal. I have to catch some portal events.For that i have written some code in my application. I tried to debug the application from portal  by using all the available break-point types.but we could not .
    Anybody have an idea how to debug a WebDynpro  application from portal.
    Thanks,
    Kumar.

    Hi
    Few links to check:
    External debugging is not working
    Re: Debugging Abap webdynpro appln
    Re: Unable to Debug WD ABAP application
    Dedug is not working in Production Server.
    a) Check on number of R/3 sessions opened at a time.
    b) Check that user ID configured in portal using System Mapping Under 'Delegate User Administration' is the same user for which you are setting external breakpoint in backend system.

  • HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

    I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

    What is the file?
    Where did you get it from?
    Allan

  • GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)

    제품 : OFSA_PA
    작성날짜 : 2003-04-25
    GETTING A GPF WHEN OPENING THE UNDO SCREEN IN PERFORMANCE ANALYZER(OFSA)
    ========================================================================
    PURPOSE
    Problem Description
    고객이 PA에서 Menu -> "Undo" 화면을 선택하면
    무시닫기 에러(GPF)가 발생함.
    Workaround
    Solution Description
    DATA_IDENTITY table에 16000 rows보다 더 많이 들어가 있으면 발생한다.
    그러므로, 과거 data 즉, undo가 필요 없는 자료를 삭제를 해야한다.
    Reference Documents
    note : 134609.1

    Hi Titan, this sounds like an IE security setting issue. Things to do:
    1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
    2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
    3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
    cameron rautmann

  • How to keep the current http session after returning from external web site

    Hi,
    When I use the response.sendRedirect api to redirect the web page to the external payment site, after payment and return back to the current application, I found that the current http session is lost.
    How to keep the current http session after returning from external web site?
    Thanks

    You should make your sidebar1 and sidebar2 fixed positioned. Make your content DIV fluid.
    This should help you: http://www.glish.com/css/7.asp

  • I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

    How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
    Thanks
    Eric

    Eric,
    these applications are applogics which are not controlled by the
    iasdeploy tool. Unfortunately, there is no tool available to remove
    these applications for you. What you can do is to manually remove all
    their entries, but be careful if you do that. If you remove the wrong
    keys you might break your ias installation, so be warned and make sure
    you backup the whole ias registry before attempting to remove anything.
    Eric Coleman wrote:
    >
    I want to remove the COnlineBank, OnlineBank and csample applications
    from my application and web server.
    How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
    and "iasdeploy removemodule" with no luck. I want to clear all of
    this demo stuff out to make both the web and app server look more
    production like.
    Thanks
    Eric
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!--
    Han-Dat Luc ([email protected])
    Senior Consultant
    SUN Professional Services (iPlanet)
    o .
    o .
    O _ ____ _ _
    (_) _ \| | __ _ _ __ ___| |_ TM
    | | |_) | |/ _` | '_ \ / _ \ __|
    | | __/| | (_| | | | | __/ |_
    |_|_| |_|\__,_|_| |_|\___|\__|
    e-commerce solutions
    Sun Microsystems Australia Pty Ltd

  • I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Liv

    I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure. " when I sign in again there is no change. in English
    == URL of affected sites ==
    http://http://sn135w.snt135.mail.live.com/default.aspx?n=2087215863
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

  • How to get the current path of my application in java ?

    how to get the current path of my application in java ?
    thanks

    To get the path where your application has been installed you have to do the following:
    have a class called "what_ever" in the folder.
    then you do a litte:
    String path=
    what_ever.class.getRessource("what_ever.class").toString()
    That get you a string like:
    file:/C:/Program Files/Cool_program/what_ever.class
    Then you process the result a little to remove anything you don't want:
    path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
    //Might be a little error here but you should find out //quickly if it's the case
    And here you go, you have a nice
    C:/Program Files/Cool_program
    which is the path to your application.
    Hooray

  • After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

    After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

    Hello kumarsenthil210317
    Check out the article below to start troubleshooting issues with touchscreen response.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    -Norm G.

  • What software is needed to be able to open the olm file I have exported from Outlook to my documents when transfering my Microsoft Office Contacts to my Mac Addressbook?

    what software is needed to be able to open the olm file I have exported from Outlook to my documents when transfering my Microsoft Office Contacts to my Mac Addressbook?

    You might find a solution here: how to convert microsoft outlook contacts to apple address book - Google Search
    OT

  • My computer refuses to even open the itunes screen what hapened?

    After installing the latest Itunes my computer refuses to even open the itunes screen. I would really like to keep all my music and movies it would suck to loose it all.

    Hi lainey,
    I'm not sure if this will be a fix but it certainly can't hurt a thing. Locate this file:
    com.apple.bluetooth.plist It's here: /Users/YourName/Library/Preferences. Open the Preferences folder, locate that file, drag it to the Trash, empty the Trash and reboot. Sometimes pref files can become corrupted and cause all kinds of problems. Your Mac will create a new pref file for you when your reboot.
    See if that helps... post back.
    Carolyn

  • Is it possible to print the current screen in Module pool program(Dynpro)?

    Is it possible to print the current screen in Module pool program(Dynpro)?
    I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

    Does the customer want a screen shot or what? Please elaborate on your requirement.
    Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

Maybe you are looking for