Opening the file in original res with Aperture changes

I am working with RAW files from a Phase One camera back. The file size in aperture shows correctly 35.6 MB for the file. When I open the image or export it I only get the preview sized file instead of the referenced file on the external disk. I assume that when you manage referenced files, and the external drive is connected, you can actually perform edits in aperture like cropping, white balance etc, and open that file in full resolution, but I have not been able to make it happen. Even if I choose "export master" I get a small file.
External editor format is set to PSD and 300 dpi, preview file setting is set to "don't limit" and everything else is set to maximize the output when the export box is up.
I hope someone has the answer to this probably dumb question!

That is too bad. Aperture seems like a great way to manage files by proxy. Since I have 50,000 images in my archive shot with phase one cameras, it would be great to get them cataloged.
Maybe one day.
Thanks for the info!

Similar Messages

Problem in response.setContentType want to open the file ms-access format

my question is :---Is it possible to open output of a jsp file in ms access format?
i m using response.setContentType("application.vnd.ms-access");but while saving this file ,the extension is jsp format not in mdb extension ...
but if i use response.setContentType("application.vnd.ms-excel") or response.setContentType("application.vnd.ms-word") or response.setContentType("application.vnd.ms-powerpoint ")..the file extension is changing and opens according to htier type defined in code..
is there any other solution open in ms-access format.?
please give the soution if any expert knows (urgent)
thanks in advance..
note:i ahve already asked this question before .but i didnt got the answer....

I am not 100% sure on this but I think it means the browser will try and open the file, I tested it with an xml file and using inline opens the xml in the browser window. I just looked at something I wrote more recently and I used the attachment option as this forces a 'save or open' dialog box.
response.setContentType("text/" + contentType);
response.addHeader("Content-Disposition", "attachment;filename=catalogue_download" + versionID + "." + contentType);

Fireworks CS4: could not open the file. Unknown file type

Hello, this is the second file created with Fireworks CS4 that can't be opened. I'm using the same Fireworks installation that created the file. The file is a 1.2 MB file containing the pages of a draft for a new website.
When I click on the file in Windows Explorer to open it, Fireworks tries to open it, but it can't. Instead, an alert pops up with this message: "Adobe Fireworks CS4 Could not open the file. Unknown file type"
Working with Windows Vista Business, Adobe Web Premium CS4 suite
I already tried opening the file, to no avail, with:
-another computer with Windows XP Pro SP3 and the same Fireworks version
-another computer with Windows XP Pro SP3 and Fireworks CS3
-another computer with Windows XP Pro SP3 and Fireworks MX 2004
Please help.

I tried to find a solution for you by using:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=error%20opening%20file&cat=su pport&product=fireworks
but I couldn't find anything. You may want to give it a go :-)
Can you open the file in another program, maybe an earlier version of FWs, or Photoshop or even Illustrator if you have it?
Not sure if there's a configuration folder that needs to be renamed and when FWs restarts it re-writes the config file... that's something to has to be done with DW when 'funny stuff' happens.
That's the best advice I have, I'm sorry :-(
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Downloading a file would bring up an option to open the file or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else?

Downloading a file would normally bring up an option to open the file with the appropriate program or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else? It's very frustrating - sometimes you want the file opened first so it can be discarded or saved to a different location.

Hey. that's great! Thanks for posting back with the outcome.

Since the installation of Firefox 8, I cannot download a specific file type from email. I use this for work and MUST be able to open these files with a specific software. When FF opens the file, it changes the extension and it will not open. Help!!!

I use the Microsoft Outlook Web App for work email. I receive files with a .RXML extension. This has always worked just fine until the latest version of Firefox came out (I was using FF 7 until this weekend). Now FF changes the extension to .ashx when I open the file and I cannot download it into my software. If I go to the company internet site and download directly from there, it does the same thing. But I can open these files just fine from IE. I REALLY don't want to have to go back to IE.

I opened one of the PDF files in notepad and these are the first couple lines:
瀖ᕁމጿ␠씴豈䧉筩롈ꓳ劏ꎯ僪뚢頟뻏즏谀㿃夑퀉꟠鲲쮂⫉笿褡밤籞冁탁ӓ轸뿐笼ⵆ횰䄌ඁ淥ة寨闤⬅鳦팥링빨嬄敎უ婏㣴ً鮓ࣿꢚ㑀녲莒඼ိȆ䕇纍쉉籶뺝갞伐쮠᥏﯒넉釖ȓ겴☧ ἣ秵駻�䣞띰㖔流羀籔朼敨ꢉ糶당⬤俉膇䄐惡�ಹꛖ鍡恡ⱶᶜ�堷﹑ﱌ僿걄뎔æ䋷귪⛢⫐䅪䉙὿烶ꖆ႟ᗔ瘞狻틫儩六잶覱낵듘盋崾�ᦜ㺆௹뻹燴ឋ騙쬄ꏿ뽒煹�钼뇲腎稦ꃲ㈃沒ꔈ뺐뛽첑䘶畱䍣紻 ⁜哠鳾

I am unable to open files on amything!!! a box pops up that asks me what do i want to open the file with..every time!! I want files to open when i click on them!! This happens with emails, websites, everything

I try to open attachments in emails and they will not open! A box comes up asking 'what do I want to open the file with', and it wants me to select from a list of options like - Firefox, IE, Word, Yahoo Browser. When I make a selection (usually Firefox) a new tab opens with a blank page! This always happens on attachments, links, websites......everything!

These files were lost two years ago.
That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

How can I prevent Firefox from opening the file I create when I print a page with PDF Create! 5

After I print a web page using PDF Create! 5, Firefox opens the file so i can view it. Before I print, I select print properties and disable "view resulting pdf". However, the file is always opened in Adobe Acrobat, although I believe I have Adobe Reader set as default. I do not want any file to open. This happens on my non-privileged accounts. On my privileged account, the file is not opened. I have removed Firefox profiles, re-installed Firefox, Reset Firefox in Help-Troubleshooting. PDF Create!5 print screen can only be viewed in a host program such as Firefox, Libre-office Writer, or any other program that prints. They do not open the file either.

Thanks for your help. This is the Scansoft (Nuance) program. What I do not understand is why when I tell the print driver not to open the file with a privileged account, it obeys me. I am not sure where in the registry I would look for the information. I do not want to, but perhaps I should remove the Adobe Acrobat program (temporarily?) - then what would it do? Again, when I print from other programs - browsers, wordprocessors, etc - the file is not opened after printing, just with FireFox. I guess I can live with it, I have spent too much time already.

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lot

The problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

I can,t open the files with my Adobe ID

I trent change my adobe ID but, i don,tnothing

Please explain in more detail. I don't understand what "open the files with my Adobe ID" means. If you get an error message, please give it in full.

Computer crashed. But i saved my PSD every like 30 seconds.. Now i open my file it says "Unable to complete request because the file is not compatible with this version of Photoshop"

So my friend posted a funny pic in her christmas outfit and I thought it would be fun to turn it into a fake Christmas Movie poster..
Anyways.. My computer crashed.. "It does that sometimes" I re-opened my PSD and it says "Unable to complete request because the file is not compatible with this version of Photoshop"
Anyway to recover ANY of the file?
Here is the file im having trouble with. You can download it here if you are interested in taking a look: http://portalpacific.net/movieposter.psd
Thanks for any help! Happy New years designers!

PortalPacific wrote:
…Here is the file im having trouble with. You can download it here if you are interested in taking a look: …http://portalpacific.net/movieposter.psd
I downloaded it and looked at it. Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
In my experience, if GraphicConverter can't open it, nothing will.
Your file is toast Sorry.

Opening the file in original res with Aperture changes

Similar Messages

Maybe you are looking for