Opening vs closing balance of the bank does not match

Hi expert,
I have loaded 2 bank statements via transaction FF_5. (for Spain)
When looking at transaction FEBA, I see that the opening balance of today is not the same as the closing balance of yesterday.
What could be the problem?
Thank you for providing your feedback.
Kind regards,
Linda

Good morning,
Thank you.
It seems that both bank statements are the same, with the same value date
How can it be that 2 statements which have the same values can be loaded?
The ID in FEBA is different.
Thank you.
Kind regards,
Linda

Similar Messages

  • The cumulative balance displayed in FS10N does not match the sum of the det

    Hello,
    The cumulative balance displayed in FS10N does not match the sum of the details.  For example, we have a GL disbursement account that has a ***. Balance of 8 million.  The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million.  According to our users, the 2 balances should equal.  I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it?  I'm not sure how f.16 functions.  Do we have to run it for each consecutive year?  I'm not a FI specialist.  I'm responsible for data archiving and the users think it's related to archiving.  However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
    Thank you very much in advance,
    Lourdes

    Hello,
    There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
    You need to identify which accounts are being changed with line item display at a later stage.
    In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
    1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
    2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
    3. Block the account for posting in COA Segment and Company Code Segment in FS00
    4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
    5. Now, remove the block you kept on the GL Account in FS00.
    This will reset the line item display retrospectively.
    Hope this will solve your problem.
    Regards,
    Ravi

  • I am trying to open a service request and the site does not work.

    I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

    I just went through several screens and had no problems.  Try clearing your browser's cache and/or history.

  • I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

    I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

    Go to the APP store or Itunes. On the bottom of the mainpage, tap your apple id, view account. Then you can edit the payment information. Or you can do it(if you encounter a problem there) on Itunes on computer. Just go to the store, select your name and edit information. Make sure everything matches...exp date, name as appears on card etc..

  • I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

    I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

    What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
    But first check the product requirements.

  • Cannot open install assistant.  I get this error message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Pleas

    How can I downloade a trial of Adobe Elements 12? 
    I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Please contact the application author.

    Hi alposer,
    Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
    Regards,
    Rave

  • Any idea what this errorr means? the data type of the reference does not match the data type of the variable

    I am using Veristand 2014, Scan Engine and EtherCat Custom Device.  I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.  
    I created a new Veristand project
    I added the Scan Engine and EtherCat custom device.
    I changed the IP address and auto-detected my modules
    i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
     So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
    Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
    Any thoughts?
    Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Preparing to synchronize with targets...
    • Querying the active System Definition file from the targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.
    • Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Preparing to deploy the System Definition to the targets...
    • Compiling the System Definition file...
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Sending reset command to all targets...
    • Preparing to deploy files to the targets...
    • Starting download for target Controller...
    • Opening FTP session to IP 10.12.0.48...
    • Processing Action on Deploy VIs...
    • Setting target scan rate to 10000 (uSec)... Done.
    • Gathering target dependency files...
    • Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
    • Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
    • Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
    • Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
    • Closing FTP session...
    • Files successfully deployed to the targets.
    • Starting deployment group 1...
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details:
    Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    LabVIEW: The data type of the reference does not match the data type of the variable.
    =========================
    NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    • Sending reset command to all targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.

    Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef?  I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).  
    Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
    You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671  
    Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
    Kevin W.
    Applications Engineer
    National Instruments

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Processor type of the file and the device does not match

    We ve the following problem with Zfh 7 sp1. When trying to distribute a
    application we receive the message failed. When i open the log is see the
    below message.
    The processor type of the file and the device does not match.
    I ve searched on the message and i ve seen that it is a know error and it
    should be fixed in SP1
    10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
    > GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
    file and the device does not match.?
    The processortype of the device is StrongARM and also from the
    applications. Also when i put it on ALL/CEF it won't distribute.
    Does some other people also have this problem.

    Mail,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

    hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
     the error message it shows is
              ******************************** ERROR ****************************************
    * The version of gcc in the path does not match the version of gcc used to    *
    * compile the currently running kernel.  This can cause unpredictable         *
    * behavior in kernel drivers and should be fixed.                             *
    * gcc version: Linux)                                                          *
    * kernel compiled with: 4.3.2                                                 *
    ******************************** ERROR ****************************************
    my kernel source version is 
       linux-8nes:/home/admin # rpm -qi kernel-source
    Name        : kernel-source                Relocations: /usr/src
    Version     : 2.6.27.29                         Vendor: openSUSE
    Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
    Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
    Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
    Size        : 309251954                        License: GPL v2 only
    Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
    Packager    : http://bugs.opensuse.org
    URL         : http://www.kernel.org/
    Summary     : The Linux Kernel Sources
    Description :
    Linux kernel sources with many fixes and improvements.
    Authors:
        Linus Torvalds <[email protected]>
        see /usr/src/linux/CREDITS for more details.
    Source Timestamp: 2009-08-15 17:53:59 +0200
    GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
    GIT Branch: SLE11_BRANCH
    Distribution: openSUSE 11.1 
    i had also installed GCC 4.3.2.
    it shows the error message as i had posted.
    please kindly help me on this.
    Thanks and regards,
    P.karthick

    Check this solution

  • Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.

    When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song. 

    i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1

  • ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

    I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
    Below is the detail of the issue.
    PLATFORM VERSION INFO
        Windows             : 5.1.2600.131072 (Win32NT)
        Common Language Runtime     : 2.0.50727.3082
        System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
        mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
        dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
    SOURCES
        Deployment url            : http://<Server>/VFOLDER/pages.xbap
        Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
    IDENTITIES
        Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
        Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
    APPLICATION SUMMARY
        * Online only application.
        * Browser-hosted application.
    ERROR SUMMARY
        Below is a summary of the errors, details of these errors are listed later in the log.
        * An exception occurred while downloading the application. Following failure messages were detected:
            + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
        No transaction error was detected.
    WARNINGS
        There were no warnings during this operation.
    OPERATION PROGRESS STATUS
        No phase information is available.
    ERROR DETAILS
        Following errors were detected during this operation.
        * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
            - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
            - Source: System.Deployment
            - Stack trace:
                at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.OnModified()
                at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
                at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
                at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
                at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
                at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
                at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
    COMPONENT STORE TRANSACTION DETAILS
        No transaction information is available.
    Any one has faced the problem... any help will be very grateful.
    Thanks in Advance.
    Sunil

    Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
    1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
    2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
    3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
    Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch.  where in the application files i have set the required assembly. please provide your useful solution.
    Thanks in Advance.
    Sunil

  • When a video is taken in Photo Booth, the sound does not match up

    When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?

    Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
    Mylenium

  • Setup for testing server "the prefix does not match.."

    I am just getting started using Adobe Dreamweaver CS3
    with AppServ (Apache, Php, MySQL).
    Im using Windows XP Service Pack 2 and and test it on the
    same computer.(localhost)
    I created a folder on my hard drive
    C:\AppServ\www\MyLocalSite.
    Here´s the setup under the Advanced tab in Dreamweaver:
    Server model:
    php Mysql
    Acess:
    local network
    Testing server folder:
    AppServ/www
    URL Prefix:
    http://localhost/MyLocalSite
    When I click OK, the following message is displayed:
    The site URL Prefix for the testing server does not
    match..
    I have run a lot of sites on my localhost but never ever
    get this unusual message.
    The worst is - I cant use the Recordset with Bindings in
    Dreamweaver CS3 if I dont solve this weird "prefix" problem.
    I ´ve tried a lot of workaround solutions but always end
    up with the message
    that prompt "the prefix does not match.."
    Is it a bug or what?
    I appreciate every answer
    Update
    21:47.................................................................................... .
    I´ve tried to configure a connection to the database
    and I end up with this message:
    1) There is no testing server running on the server machine
    2) The testing server specified for this site does not map
    the
    http://localhost:80/myLocalSite/_mmServerScripts/MMHTTPDB.php
    URL.
    Verify that the Prefix maps to the root of the site
    The server is running and is working when I request my local
    site in IE 7:
    localhost/myLocalSite/index.php

    I too had been experiencing this problem after installing XP
    service pack 3 last week.
    Too fix this issue I had re-assign all file permissions to my
    root web folder.
    Remove all permissions and re-assign the groups
    administrators, authenticated users and everyone FULL CONTROL of
    this folder.
    Click the advanced button and make sure permissions are not
    being inherited from the parent folder.
    Then select the option to re-assign all permissions to all
    child files/folders.
    Good luck.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

Maybe you are looking for