Openings for Software Test Engineers - Full Time - Permanent - Michigan based

The Software Test Engineer is responsible for the verification and validation of embedded software to detailed requirements. This position interfaces to Project Engineering, Hardware Engineering, Software Development, Program Management, and Research & Development.
The following qualifications are required:
*       Bachelor's degree in Electrical Engineering, Computer Engineering, or related discipline.
*       Ability to relocate to West Michigan
*       U.S. Citizenship
The following skills are required and will be tested as part of the interview process:
*       High proficiency in Embedded Software Testing
*       Proficiency in Automated Software Testing
*       Proficiency in C++ or scripting languages
*       Understanding of good development and testing practices
*       Ability to communicate and collaborate within Gentex
The following skills and qualifications are desirable:
*       Automotive embedded software test experience
*       Experience with Test-Driven Development, Continuous Integration and other Agile practices
*       Proficiency in Embedded Development
*       Proficiency with Software Requirements
*       Experience with CMMI/SPICE
E.O.E.
apply online at www.gentex.com/careers

We are looking for someone that can work within our facility, which is located in the U.S.

Similar Messages

Hiring Software Developers - Full-time - Permanent - Michigan based

Location: Zeeland, Michigan
The Software Development Engineer is responsible for designing, developing, and testing embedded software to detailed requirements. This position interfaces to Project Engineering, Hardware Engineering, Software Test, Program Management, and Research & Development.
The following qualifications are required:
Bachelor's degree in Electrical Engineering, Computer Science, Computer Engineering, or related discipline.
Ability to relocate to West Michigan
U.S. Citizenship
The following skills are required and will be tested as part of the interview process:
High proficiency in C
Proficiency in RTOS concepts
Proficiency in Embedded Development
Ability to collaborate in the development process
Appreciation for good development practices
The following skills and qualifications are desirable:
Automotive software development experience
Experience with Test-Driven Development, Continuous Integration and other Agile practices
Proficiency in C++
Experience with CMMI/SPICE
DSP experience
E.O.E.
Apply online at www.gentex.com/careers

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Multiple Job openings for front-end engineers

We have multiple openings for front-end engineers. If you are familiar with JSP, XSL, Custom tags, etc and have a desire to work in an engineering driven company that is growing very fast please send your resume to [email protected]

so look at library to work with bip by java api
as example of merging Merging pdf documents using the BI-Publisher API</title> //<title>AMIS Technology Blog &raquo; Mergin…
may be some split method exists
so you can seek for some java api for working with pdf and as your report contain X customers on X pages thus customer per page then you can try to split by page

Why can't I use the test circuit full time????

Just over two weeks with BT and I have to say without question the worst company I have ever dealt with. Utter utter useless at customer service and do nothing they promise, so I turn to the forum.
After a week on the phone to India finally get the phone and broadband working and then today I can't make out going calls. Incoming calls and Broadband still working.....for now.....
Anyway not feeling like spending another hour on hold have gone through the (so called) help online.
Can anyone explain how and why the test circuit on the junction box works fine but the 'main socket doesn't???
Further more why can't you just plug the phone into and keep it in the test circuit???
Also what would cause the line to suddenly stop working? nothing inside the house has changed???

Hi
The incoming line from the telephone exchange connects in the back of the main socket attached to he wall, when you plug the front plate in to the test socket it extends the line through to the socket on the front plate as well to some wiring connection ponts on that front plate.
If you have other sockets around the house they would either be plugged into the front plate or would be hardwired onto the rear of the front plate.
By unplugging the front plate all sockets in the house now become in active, can you confirm if there are wires connected at the rear of the front plate
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Urgent Openings for HRMS Support Engineers

We are looking for Candidates with Experience in Oracle HRMS or any other ERP exposed to HRMS suite.
The profile of the candidate should consist of -
1. Experience on Oracle HRMS or any other ERP on HRMS
2. Excellent skills on SQL/PLSQL-
(exposure to JAVA would be a great asset)
3. Excellent communication skills (as this is a requirement for Support across the Globle for Oracle Application HRMS suite)
You get the experience of interacting with Global customers who are implementing Oracle HRMS suite providing them with Technical cum Functional solutions.
Experience - 1 to max of 4 yrs overall(all experience put together).
Urgent Requirement with immediate hiring at Bangalore/Hyderabad.
If you believe you are the candidate or know someone, please email your resume to - [email protected]

OK. Here it is...
http://en.wikipedia.org/wiki/Neodymium_magnet
"Neodymium magnets are very strong in comparison to their mass..."
A.K.A. "rare-earth magnetS".
"While most solid state electronic devices are not effected by magnetic fields, some medical devices are not manufactured to mitigate the effects of strong magnetic fields." Maybe phones too?
These could be the ones that I removed from my case:
http://www.kjmagnetics.com/proddetail.asp?prod=D603
From the above sales site:
"Never place neodymium magnets near electronic appliances."

Part Time, Contract Based, and Full Time Positions available for LabVIEW Developers

Mindready (www.mindready.com) is looking for flexible, hard working individuals to fill part time, contract based, and full-time/permanent jobs in LabVIEW development positions. We have immediate needs for contract labor in Dallas, TX; NY; Huntsville, AL and Austin, TX, as well as other locations. US Citizen and Security Clearance required on some projects. Mindready is a certified National Instruments Alliance Partner with facilities in Montreal, Austin, TX and (Radical Systems, Inc. – a mindready company) Huntsville, AL (www.radicalsystems.com).
The duties of the positions include:
• On and off-site LabVIEW development work. May involve TestStand, instrumentation such as PXI and stand alone instruments, DAQ, Motion, Vision, etc.)
• Willingness to travel for periods as short as 2-3 days, to as long as 6 months. (Ideal candidate would be local to any long assignment)
• Integrate into customer’s development team to design and modify new/existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
• Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
• Broad technical knowledge is a plus, we serve a wide range of application areas
• Excellent writing, communication (English), time-management, and interpersonal skills.
• Ability to travel for on-site work at customer facilities for jobs as short as 1 week, possibly as long as 6 months.
• Discipline and organization with respect to software development and maintenance.
• Engineering, Technical or Computer Science degree or appropriate experience
• Certification is not required but would be beneficial
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive hourly rate.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Job Opening for Test Engineer in Detroit, Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the email to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Still this position is open. My cantact number is 1-248 479 3055
Thanks
Vijay

Name:Anoop Kumar.K.V
AddressF1,SreeBhavan,SaradambaNagar,Ist Main Road,Jallahalli,Bangalore-560013,India
Contact Details:+91-9739180646
Email Address: [email protected]
Date: 02/ 12/ 2014
Hi,
I am a Software engineer with excellent academics and 8.9 years of industrial automation engineering experience in engineering and commissioning of various Poultry Feed Plants. Being specialized in for PLC (Siemens-S7-200, S7-400 and Schneider M340) and Labview2010 programming.I have enclosed my resume that will provide you with proper details about my educational background and work experience.
I am currently working at (Indian Industrial Machines Pvt.Ltd, Bangalore, India) and have gained a valuable experience here as a senior SCADA Developer. I am fluent with VB6.0, VB.Net, Labview2010 and PLC. This matches up with the requirements for the post in your organization.
I would like to meet you and discuss on this more. I would be glad if you could tell me when and where we can meet. I can be contacted at (+919739180646 ) or email me at ([email protected] or [email protected]).
Thank you so much.
Sincerely,
Anoop Kumar.k.v
Enclosures: Resume
Attachments:
AnoopCV.doc ‏222 KB

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

SpaceX Seeking Full-Time Electrical Engineers in Texas!

Please contact Brandon Garrett at [email protected] for more information. Full job description and application can be found here.
ENGINEER THE FUTURE
SpaceX is a U.S.-based advanced technology company founded by residing CEO and CTO, Elon Musk. Founded in 2002, SpaceX builds rockets and spacecraft from the ground up, including cutting edge electronics, software, vehicle structures, and engine systems. The Falcon Launch Vehicle and Dragon Spacecraft programs are some of the most ambitious engineering systems in the world, designed to support our ultimate goals of aviation-like spaceflight capability and making humanity a multi-planet species. Our team is made up of more than 3,000 SpaceXers located across our Hawthorne, California headquarters; and other facilities in Florida, Texas, and Washington, DC.
ADVANCE THE COURSE OF HUMAN HISTORY AND PAVE THE WAYS TO MARS
This is SpaceX. We are not like most companies. Our goal is to do what has never before been done--enabling mankind to live on other planets. We push the boundaries of what is currently possible, and understand it takes rare individuals to help us make this happen. We celebrate our successes, and each other. We seek future colleagues with a rare mix of drive, passion, scrappiness, intelligence, and curiosity to seek what’s beyond the stars.
Playing a direct role in advancing the course of human history is no small endeavor. Join us, and find your place in the SpaceX legacy.
ELECTRICAL ENGINEER (DATA AND CONTROL SYSTEMS)
RESPONSIBILITIES:
Maintain National Instruments SCXI/PXI data acquisition systems: identify hardware requirements and compatibility; assemble, setup, and validate DAQ hardware configurations; troubleshoot DAQ hardware related problems
Design wiring layouts and routing for interfacing to data acquisition systems: improve grounding and shielding of data systems; specify wiring specifications for harness builds; integration of new features into existing systems
Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment
Provide technical support for instrumentation on test stands: provide and update drawings of electrical power systems, data/control systems; provide troubleshooting support for electronic technicians; calibration of instrumentation sensors; evaluate new systems, technologies, and architectures to reduce development time, increase reliability, and to streamline operations
BASIC QUALIFICATIONS:
Bachelor’s Degree in Electrical Engineering or related field; years of experience in lieu of degree will be considered
PREFERRED SKILLS AND EXPERIENCE:
5 years of relevant experience preferred; entry level positions also available
Experience with National Instruments SCXI/PXI data acquisition systems
1-2 years’ experience with AutoCAD
1-2 years’ experience with Visio
Experience with Autodesk AutoCAD Electrical a plus
Proficient manual electronic skills such as soldering, insulation and wiring, splicing, and component selection
Working knowledge of data acquisition systems
Proficient with pressure transducers, thermocouples, RTDs, accelerometers, strain gauges, flow meters, load cells, relays, solenoid valves
Familiarity with National Instruments products, services and resources
Demonstrated ability to implement and troubleshoot National Instruments hardware
Proficient in noise reduction, shielding, grounding techniques, termination and analog and digital filtering to provide high fidelity measurements
Ability to specify instrumentation wiring needed for various interfacing of data systems and sensors
Experience with electrical power distribution, a plus
Working knowledge of Labview, a plus
Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment
Ability to deal with ambiguity and manage multiple priorities
ADDITIONAL REQUIREMENTS:
Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
Ability to work at elevated heights (200+ feet)
Physical effort with climbing up and down stairs regularly throughout the day
Physical effort with some handling of light weight supplies or materials (0 to 15 lbs)
Work performed in an environment requiring exposure to fumes, odors, and noise
Typically 50 hour work weeks, schedule varies depending on site operational needs, flexibility required
Typically exposed to work in extreme outdoor environments – heat, cold, rain
ITAR REQUIREMENTS:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.
CONNECT WITH US
Want to learn more about SpaceX career opportunities and culture? Be sure to connect with our recruiting team on social media: Twitter, Facebook, LinkedIn, Tumblr, and SpaceX Careers.
Link to job decription and application found here.

Still waiting for the Venice, CA team, just kidding.
LabVIEW Champion . Do more with less code and in less time .

Test Engineer (electro-optical) full-time position in Los Angeles

I'm a recruiter working with OSI Optoelectronics and we are looking for a Test Engineer to design, build, modify, repair, troubleshoot and debug optoelectronic test systems.
This is a full-time position located in Hawthorne CA.
Must be US Citizen or Permanent Resident.
Responsibilities:
- Design and develop test fixtures, tooling, software programs, and procedures for specific products to verify products compliance to specifications.
- Validate, maintain and monitor metrology lab equipment and tooling for diodes calibration and ensure test measurement accuracy meets production requirements.
- Maintain scheduling of vendors for fixturing, program delivery, and interface and train technicians on procedures, process and repair.
- Customer interface on all test issues.
Qualifications:
- BS in Electrical Engineering, Physics or equivalent
- 2-5 years experience in optoelectronic testing or related field.
- Good understanding of metrology methods.
- Experience with optics and /or knowledge similar background is required.
- LabView programming experience.
Compensation: $55,000 - $75,000 + employee benefits

Hey Kmagel,
My name is Jerry Downing and I am an experienced RF system test engineer with extensive experience in hardware (i.e test sets, RF test drawers, PCB...etc.) and software test solution design and development. I have developed calibration and test routines (for mobile and base station applications of the UMTS WCDMA GSM and EDGE applications) in Labview, VB, VB.NET and TestStand. I am experienced in managing test solution development, contractors, contract manufacturers, and product line transfers. I have also completed PMP (Project Management Professional) training.
I have a consulting company named Downing Automation Consulting (DAC) in your area that focuses on automating test processes. I wanted to see if I might be able to speak with you further about your test needs. Please take a look at my web page when you have time. It lists some of my experiences. I would like to speak to you further about the specifics of what are the current and future needs at OSI Optoelectronics.
www.downingautomation.com
Thanks again for your time and Happy Holidays,
Jerry ([email protected])

Full Time Software Engineer with Labview Experience Wanted - NJ

Pentek, Inc. located in Upper Saddle River, New Jersey is an established, high-tech manufacturer of Software Radio and Signal Processing products as well as High-Speed Recording Systems. We are seeking a multifaceted and resourceful Applications Engineer to join our Recording Systems Development Team. As part of this team, you will be responsible for software development, test and support of Pentek's high-speed PC-based recording systems.
Qualifications
Labview development experience
C programming experience a plus
JAVA programming experience a plus
Good verbal and written communication skills
This is a full-time position with 401k, excellent health insurance benefits, vacation/sick/personal days, competitive salary, and a great working environment!
If Pentek sounds like the place for you, please fax, mail or email your resume to:
Pentek, Inc.
Attn: Human Resources Manager
One Park Way 2nd Floor
Upper Saddle River, NJ 07458
Phone: (201) 818-5900
Fax: (201) 818-5692
Email: [email protected]
http://www.pentek.com/

We are looking for someone that can work within our facility, which is located in the U.S.

Crane Aerospace and electronics is looking for Test Engineers with LabVIEW experience - please disregard previous post.

Here is the correct post:
Are you detail-oriented, creative, and technically skilled at Engineering design and development? Come to Crane Aerospace & Electronics and use your excellent Engineering skills to design, improve, and deliver the next generation of products in the aerospace and electronics Industry!
We have a unique and exciting career opportunity for Engineer II, Test.
You will be responsible for maximizing new product development and manufacturing performance through the creation and deployment of test strategies, tools, and plans. Design and implement high performance hardware and software for test equipment. Authoring test procedures and performing Qualification test activities. Ensure high product quality.
Responsibilities:
Collaborate with customers and multi-disciplined engineers to establish/clarify test, qualification, verification and validation requirements.
Write test plans, procedures, requirements and reports in a highly structured environment.
Analyze, develop and deploy complex and high performance test hardware and software solutions for automated test equipment.
Design, develop, debug, validate & verify the fabrication of manual and automated test equipment at the circuit board and system level, and specify and procure COTS test equipment.
Develop/maintain hardware documentation including block diagrams, schematics, BOMs, wiring diagrams and wiring lists, software documentation, and configuration control of initial release and updates.
Perform detailed calculations to establish test equipment specifications and design margins.
Maintain existing test systems through bug fixes, improvements and modifications.
Support the estimation of costs and schedules to develop or upgrade test platforms.
To perform a number of the above responsibilities with limited supervision.
Minimum Requirements:
Experience: 2-5 years. Previous work experience in aerospace, space or medical electronics industry preferred.
Knowledge: Microprocessor / Microcontroller hardware and firmware design; Analog Circuit and power supply design; Digital Circuit Design including high-speed serial communication design; Firmware programming in c; Schematic Capture, PADS Logic preferred; Circuit Simulation; Fundamentals of magnetic proximity, temperature, and pressure sensing electronics; ESD; Familiarity with testing standards (MIL-810, MIL-704, and DO-160 preferred). Basic laboratory test equipment; LabVIEW experience, certification preferred; Developing hardware per DO-254 and software per DO-178 preferred; Experience with Adobe FrameMaker, IBM Rational tools, TestStand, Microsoft Project preferred.
Skills: Good interpersonal and communication skills (verbal and written)- effectively lead and/or participate in multifunctional teams in a dynamic work environment. Ability to manage multiple tasks, flexibility to switch between tasks and prioritize tasks.
Education/Certification: Bachelors Degree in electrical engineering, computer science, physics or related technical discipline.
Eligibility Requirement: Must be a US Person (under ITAR rules) to be eligible.
Working Conditions:
Working conditions are normal for an office/manufacturing environment. Machinery operation requires the use of safety equipment to include but not limited to safety glasses, heel straps, and shop coats.
Requires lifting 25 lbs
Apply online today: http://ch.tbe.taleo.net/CH06/ats/careers/requisition.jsp?org=CRANEAE&cws=5&rid=3170
Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Visit our website at CraneAE.com for more information on our company, benefits and great opportunities.
In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check and pass a drug screen prior to employment. FAA sensitive positions require employees to participate in a random drug test pool.

How can you say you are hiring test engineers with LabVIEW, yet the job description doesn't even mention LabVIEW. All I see in there is CAD design.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

UK Based company seeking experienced LabVIEW Developer for Full Time Position

·          High level of experience and competence with National Instruments Labview versions 7 & 8 and other National Instruments software and hardware products
·          Competence in Microsoft Visual C++, Visual Basic
·          A good working knowledge of a range of networking and communication systems and protocols including: Ethernet (all varieties), RS232, RS422, RS485, MODBUS, CAN
·          Experience with the design of control and monitoring systems for safety critical systems in offshore oil applications
·          Design, development, implementation and maintenance of software for both in house use and distribution·          Development and maintenance of software design and test specifications and associated documentation
·          Verification and validation of software and associated systems (hardware and software)
·          Management of software development process, applications tools and source code, thereby ensuring conformity with the company’s accredited ISO9001:2000 quality system
·          Management of software version control and releases
·          Customer support for products (principally for software related issues)
·          Design and development of Control System Graphical User Interfaces, and implementation of software aspects of system functional requirements through the use of standard software packages, and system configuration.
Contact Tim or Caroline on 01751 433100 or email [email protected]

Hi,
I am from india.I can able to complete the projects through the internet itself.
Please let me know if any demos required to show my expertation.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Looking for full time position using Labview and/or PLC's in Long Island NY area

I have 13 years experience using Labview for user interface/daq applications. I also have 20 years experience with Programmable Logic Controllers (PLC) programming for industrial machine controls. My resume follows:
Adam Wechsler
111 Holbrook Rd.,Holbrook,NY 11741,(631) 981-1013 [email protected]
Objective
Labview programming, virtual instrumentation, industrial machine controls,
automation, PLC, HMI, GUI, data acquisition
Education:
B.S. Mechanical Engineering 5/89
Polytechnic University, Brooklyn, NY
A.S. Engineering Science 5/86
Suffolk Community College, Selden, NY
(GPA 4.0 Dean's List Spring 1986)
Experience:
Controls Engineer 5/1994-3/2009
Vacuum Instrument Corp., Ronkonkoma, NY
*Program, troubleshoot, and upgrade automated Vacuum Chamber Industrial Leak Detection systems controlled by Allen Bradley PLCs in an OEM environment.
*Debug equipment functions and programs prior to shipping, at customer's site, and by phone.
*Integrate and install various types of peripheral equipment, barcode scanners and printers,
*Design and develop Labview graphical user interfaces and HMI applications including recipe management and data collection for industrial machinery.
*Write and review user manuals and installation instructions.
Production Engineer 10/1989-5/1994
Izumi Corporation, Yaphank, NY
*Program, maintain, troubleshoot, and repair PLC controlled hydraulic, pneumatic, and control systems for automation in a hands-on environment.
*Improve design for manufacturability of new products and prototypes to be urethane/injection molded.
*Program, maintain, troubleshoot, and repair six axis hydraulic paint spraying robots.
*Create interface between multiple PLC’s and central computer system.
*Improved design and productivity of high volume, computer controlled, robotic molding machine by 150%.
Consulting Projects:
*Created Labview user interface components, and recipe management system for the testing of motion control servos.
*Programmed Allen Bradley PLC machine logic for packaging machine for a food service supplier.
*Created Labview to Allen Bradley PLC setpoint and monitoring interface for electric motor-starter test stand.
*Programmed Allen Bradley PLC and PanelView operator interface terminal for cosmetic packaging assembly machine.
*Developed Labview application for Fourier and statistical analysis of myogram biomedical data for researching the efficacy of acupuncture treatment.
Other:
*Attended National Instruments Labview training courses, and regularly attend local Labview Users Group meetings as a long standing member.
*Member IEEE
*13 years experience with Labview
*15 years experience with vacuum chamber, mass spectrometer, and related technologies
*20 years experience with PLC's and automated systems
*Attended Autocad training course.
*Willing to travel

Will also consider contract, part time, or consultant work.

Openings for Software Test Engineers - Full Time - Permanent - Michigan based

Similar Messages

Maybe you are looking for