OpenLDAP missing after EPM 11.1.1.4 fresh install on Oracle Linux 5.8 32bit

Hello,
I try install Oracle EPM Foundation 11.1.1.4 on Oracle Linux 5.8 32Bits.
No error with installTool.sh but the openLDP directory missing in $HYPERION_HOME/product/Foundation
I have found the openLDAP files after extrac from productCommonComponents/assembly.dat
some can help me ?
Regards

Where's the WebLogic Server home???
Else you should attach this to an existing WebLogic domain
kind regards
Michel
Edited by: Michel Schildmeijer on 20-okt-2011 15:57

Similar Messages

  • Beats audio Panel Missing after upgrading to Windows 8.1 and installing HP Reccomended Drivers

    I recently upgraded to Windows 8.1 on my HP Envy H8-1450. The Beats audio Panel Disappeared and only shows IDT.
    I uninstalled and re-installed the HP reccomended audio drivers several times....no luck.The sound does not sound as it did under Windows 8...actually it is crapy.
    Please help.....Thanks.

    lacadan,
    Did you reboot your PC after installing the IDT codec in Device Manager?
    I have upgraded from Win 8 to Win 8.1, have the same driver (6.10.6491.0) as you, and also have a fully functioning Beats Audio Control Panel in Control Panel.
    When initially removing the incorrect Beats audio codec in Device Manager you should also check completely remove the drivers from your system, reboot, and Win 8.1 should install the correct version of Beats. You then have to reboot your PC again to complete the installation of Beats.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    16 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • Computer shuts down after starting web browser etc. in fresh install

    i re-installed last night as i noticed a while ago i was using 64bit and had been meaning to get around to switching to 32bit.
    the install went fine, but when i install xorg and a window manager (i tried dwm and openbox), and start a web browser (i tried midori and luakit), my laptop shuts itself down as if it had overheated or something similar.
    at first i thought my laptop was having trouble, but i'm currently booted into a manjaro livecd (i know), and can browse etc. with no issues.
    any ideas on what might be causing this, or what i can post here to help troubleshot?
    thanks.

    Does the laptop shutdown immediately after you open any web browser? Do any other applications, such as Thunderbird or LibreOffice, cause this behaviour?
    Does your laptop do a controlled shutdown or a *poof* hard shutdown?
    Can you get a temperature reading from your computer (by using software tools) as you open a web browser?
    Also (and this is gonna sound weird) please post your PATH variable. ("echo $PATH")

  • Doing Login to WebCenter Spaces after Fresh Install Hangs [ID 976907.1]

    hi
    i have an issue with webcenter spaces ,i searched oracle documentation and found a description and a solution but it is still not working .
    i have oracle webcenter 11.1.1.5 ,installed on oracle Linux Enterprise 5.5 ,installation is made with 3 physical nodes joined to one domain as described on oracle documentation (ID
    the solution is described on document [ID 976907.1]
    Applies to:
    Oracle WebCenter - Version: 11.1.1.1.0 to 11.1.1.5.0 - Release: 11g to 11g
    Information in this document applies to any platform.
    Symptoms
    On : WebCenter Spaces.
    When attempting to login to WebCenter Spaces, the login hangs.
    The WebCenter Spaces diagnostic log (WLS_Spaces_diagnostic.log) shows the following error at the time of login:
    [2009-12-07T10:59:04.645-08:00] [WLS_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000ILeW_Ss2bMK5qVh8iY1B7KwH00000F,0] [APP: webcenter] [[
    oracle.adf.share.security.ADFSecurityRuntimeException: The URL typed by current user is not accessible, so redirecting to the unAuthorized page
    at oracle.webcenter.webcenterapp.internal.view.security.WCAuthorizationHandler.handleAuthorizationFailure
    (WCAuthorizationHandler.java:62)
    STEPS
    The issue can be reproduced with the following steps:
    1.     Install of WebCenter.
    2.     Start the Node Manager and Managed Servers.
    3.     Access WebCenter Spaces URL:
    http://server:8888/webcenter/spaces
    4.     Attempt to login as weblogic user.
    Here the login hangs.
    Cause
    The domain system-jazn-data.xml file is missing all the security information for WebCenter.
    The file should have entries like this:
    <policy-store>
    <applications>
    <application>
    <name>webcenter</name>
    <app-roles>
    <app-role>
    <name>s8bba98ff_4cbb_40b8_beee_296c916a23ed#-#Administrator</name>
    <guid>A03A67D1E43711DEBF8B15EA0015534D</guid>
    <class>oracle.security.jps.service.policystore.ApplicationRole</class>
    <members>
    <member>
    <class>weblogic.security.principal.WLSUserImpl</class>
    <name>weblogic</name>
    </member>
    </members>
    But in this case the file is missing the security entries for WebCenter like the above.
    Reviewing more entries in the WebCenter Spaces diagnostic log (WLS_Spaces_diagnostic.log) there was another error in the log that indicated file permission errors:
    [2009-12-07T10:53:15.966-08:00] [WLS_Spaces] [WARNING] [JPS-04085] [oracle.jps.deployment] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 0000ILeVDiF2bMK5qVh8iY1B7KwH000000,0] [APP: webcenter] [arg: oracle.security.jps.JpsRuntimeException: java.io.FileNotFoundException: /tmp/jazn-data-577128801xml.lck (Permission denied)] Migration of codebase policy failed. Reason: oracle.security.jps.JpsRuntimeException: java.io.FileNotFoundException: /tmp/jazn-data-577128801xml.lck (Permission denied).
    While checking the permissions on the /tmp/jazn-data-577128801xml.lck file it was noted that it was owned by root user and oracle user did not have permissions on the file.
    Solution
    1.     Shutdown the Node Manager and Managed Servers.
    2.     Change the ownership of the temporary file in /tmp directory to be owned by the user that was used to install WebCenter and that is being used to start WebCenter:
    In this case the file name is: /tmp/jazn-data-577128801xml.lck
    But in your system the name can be different. But the name should be like:
    /tmp/jazn-data-NNNNNNNNNxml.lck
    3.     Ensure the user that was used to install WebCenter has privileges to read, write, and update the above file.
    If needed give grants on the file to the user that was used to install WebCenter.
    4.     Restart WebCenter.
    5.     Re-Test the issue.
    the problem is that i applied the solution but it is not working with me .if i grant (oracle) user which is used to install webcenter a privilege on /tmp/ folder,after restart everything become a in a big mass , that's because there is some files which belongs to root and mustn't be granted to oracle (this is as i understand maybe its wrong) .and if i grant and it is already granted full permission to (oracle) user on the file (jazn-data-NNNNNNNNNxml.lck) it is still not working and XML files is zero size .i do this on webcenter server (host2) and also on soa server (host1) which have admin server .
    is there any advise ? am i missing something ? it is really a big problem to me as we suppose to go live next week !!!

    Joel, in a different posting was able to help me out.
    Below is the steps I used to create a new admin account to by pass the one that seemed to be bad. Everything seems to be working for me now. Thanks for your help.
    alter user FLOWS_020200 account unlock;
    connect FLOWS_020200/apex
    begin
    wwv_flow_api.set_security_group_id(p_security_group_id=>10);
    wwv_flow_fnd_user_api.create_fnd_user(
    p_user_name => 'admin2',
    p_email_address => '[email protected]',
    p_web_password => 'admin2') ;
    end;
    alter user FLOWS_020200 account unlock;
    Thanks,
    Jason

  • Can't login after fresh installing gnome using gdm 3.2 [SOLVED]

    I don't know if this topic was already solved, I hope someone can help me about this. I have a fresh install of arch linux (just yesterday) and installed gnome and gnome-extra packages. As usual, I go with the procedure of editing my .xinitrc (exec ck-launch-session dbus-launch gnome-session), rc.conf (...dbus networkmanager...), inittab (runlvl 5, x:5......gdm). After a reboot, gdm screen appeared, I can't find my account, then there were two choices, "Sign in" and "Not listed..."). I clicked Not listed, then entered my user and password, after that, it responded: Authentication failure/failed... or something like that. I tried it again and it's the same. Temporarily, I'm using startx or slim (depends on my mood). Can anyone help me?
    here's my gdm's 0.log and 0-greeter.log respectively:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at [url]http://bugs.freedesktop.org[/url]/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See [url]http://wiki.x.org/wiki/GitPage[/url] for git access instructions.
    X.Org X Server 1.11.1.901 (1.11.2 RC 1)
    Release Date: 2011-10-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux espionage 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 12:14:48 UTC 2011 i686
    Kernel command line: root=/dev/disk/by-uuid/9645b27b-41ee-461a-b4f0-f5ba1794542c ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    Build Date: 24 October 2011 12:26:09PM
    Current version of pixman: 0.22.2
    Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 19:43:23 2011
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    (--) PCI:*(0:0:2:0) 8086:27a2:1025:012f rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:27a6:1025:012f rev 3, Mem @ 0xdc180000/524288
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (==) AIGLX enabled
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.13.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (==) Matched intel as autoconfigured driver 0
    (==) Matched vesa as autoconfigured driver 1
    (==) Matched fbdev as autoconfigured driver 2
    (==) Assigned the driver to the xf86ConfigLayout
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.16.0
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.11.1, module version = 2.3.0
    (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 0.4.2
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    (II) VESA: driver for VESA chipsets: vesa
    (II) FBDEV: driver for framebuffer: fbdev
    (++) using VT number 7
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (WW) Falling back to old probe method for vesa
    (WW) Falling back to old probe method for fbdev
    (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 0.0.2
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (**) intel(0): Relaxed fencing disabled
    (**) intel(0): Wait on SwapBuffers? enabled
    (**) intel(0): Triple buffering? enabled
    (**) intel(0): Framebuffer tiled
    (**) intel(0): Pixmaps tiled
    (**) intel(0): 3D buffers tiled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output TV1 has no monitor section
    (II) intel(0): EDID for output LVDS1
    (II) intel(0): Manufacturer: SEC Model: 4442 Serial#: 0
    (II) intel(0): Year: 2006 Week: 0
    (II) intel(0): EDID Version: 1.3
    (II) intel(0): Digital Display Input
    (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) intel(0): Gamma: 2.20
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
    (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
    (II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
    (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
    (II) intel(0): Unknown vendor-specific block f
    (II) intel(0): SAMSUNG
    (II) intel(0): LTN141W3-L01
    (II) intel(0): EDID (in hex):
    (II) intel(0): 00ffffffffffff004ca3424400000000
    (II) intel(0): 00100103801e13780a87f594574f8c27
    (II) intel(0): 27505400000001010101010101010101
    (II) intel(0): 010101010101ee1a0080502010300c40
    (II) intel(0): 33002fbe100000190000000f00000000
    (II) intel(0): 00000000002387026400000000fe0053
    (II) intel(0): 414d53554e470a2020202020000000fe
    (II) intel(0): 004c544e31343157332d4c30310a0064
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    (II) intel(0): Printing probed modes for output LVDS1
    (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output TV1
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output TV1 disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) intel(0): Kernel page flipping support detected, enabling
    (**) intel(0): Display dimensions: (300, 190) mm
    (**) intel(0): DPI set to (108, 106)
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.0.0
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.11.1.901, module version = 1.2.0
    (II) Unloading vesa
    (II) Unloading fbdev
    (II) Unloading fbdevhw
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (II) intel(0): [DRI2] DRI driver: i915
    (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (II) put_image
    (II) get_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (==) intel(0): hotplug detection: "enabled"
    (--) RandR disabled
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_INTEL_swap_event
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized i915
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) config/udev: Adding input device Power Button (/dev/input/event3)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.10.99.902, module version = 2.6.0
    (II) Using input driver 'evdev' for 'Power Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (--) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Video Bus'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (--) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Sleep Button'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Sleep Button: always reports core events
    (**) Sleep Button: Device: "/dev/input/event2"
    (--) Sleep Button: Found keys
    (II) Sleep Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
    (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event9"
    (--) A4TECH USB Device: Found 1 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found absolute axes
    (--) A4TECH USB Device: Found x and y absolute axes
    (--) A4TECH USB Device: Found keys
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Configuring as keyboard
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 9)
    (EE) A4TECH USB Device: failed to initialize for relative axes.
    (WW) A4TECH USB Device: found 37 axes, limiting to 36.
    (II) A4TECH USB Device: initialized for absolute axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event10)
    (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    (II) Using input driver 'evdev' for 'A4TECH USB Device'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) A4TECH USB Device: always reports core events
    (**) A4TECH USB Device: Device: "/dev/input/event10"
    (--) A4TECH USB Device: Found 20 mouse buttons
    (--) A4TECH USB Device: Found scroll wheel(s)
    (--) A4TECH USB Device: Found relative axes
    (--) A4TECH USB Device: Found x and y relative axes
    (II) A4TECH USB Device: Configuring as mouse
    (II) A4TECH USB Device: Adding scrollwheel support
    (**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
    (**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 10)
    (II) A4TECH USB Device: initialized for relative axes.
    (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    (**) A4TECH USB Device: (accel) acceleration profile 0
    (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    (**) A4TECH USB Device: (accel) acceleration threshold: 4
    (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event11)
    (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'Acer CrystalEye webcam'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) Acer CrystalEye webcam: always reports core events
    (**) Acer CrystalEye webcam: Device: "/dev/input/event11"
    (--) Acer CrystalEye webcam: Found keys
    (II) Acer CrystalEye webcam: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD, id 11)
    (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (--) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.11.0, module version = 1.5.0
    (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
    (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    (II) No input driver/identifier specified (ignoring)
    (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    (II) No input driver/identifier specified (ignoring)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) intel(0): EDID vendor "SEC", prod id 17474
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Unloading synaptics
    (II) AT Translated Set 2 keyboard: Close
    (II) Unloading evdev
    (II) Acer CrystalEye webcam: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) A4TECH USB Device: Close
    (II) Unloading evdev
    (II) Sleep Button: Close
    (II) Unloading evdev
    (II) Video Bus: Close
    (II) Unloading evdev
    (II) Power Button: Close
    (II) Unloading evdev
    Server terminated successfully (0). Closing log file.
    gnome-session[1036]: DEBUG(+): Enabling debugging
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/espionage:@/tmp/.ICE-unix/1036,unix/espionage:/tmp/.ICE-unix/1036
    gnome-session[1036]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: setting client store 0x9fe2638
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x8062560
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1036]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1036]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1036]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1036]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1036]: DEBUG(+): fill: *** Adding required components
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1036]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1036]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1036]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1036]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1036]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1036]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1036]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1046
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581614780600000010360002 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1118
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1036]: DEBUG(+): GsmManager: RegisterClient 10acccb988624d95d5131971581226648300000010360001
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226648300000010360001 to session
    gnome-session[1036]: DEBUG(+): uid = 120
    gnome-session[1036]: DEBUG(+): pid = 1046
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1036]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10acccb988624d95d5131971581226572800000010360000
    gnome-session[1036]: DEBUG(+): GsmAutostartApp: started pid:1133
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1036]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=IsInhibited
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: New client '0xa00d0c0 []'
    gnome-session[1036]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1036]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Initializing client 0xa00d0c0 []
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 []' received RegisterClient(10acccb988624d95d5131971581226572800000010360000)
    gnome-session[1036]: DEBUG(+): GsmManager: Adding new client 10acccb988624d95d5131971581226572800000010360000 to session
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Set properties from client '0xa00d0c0 [10acccb988624d95d5131971581226572800000010360000]'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: ProcessID = '1133'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=Get
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: connecting to address: unix:abstract=/tmp/gdm-greeter-bvcleLaw,guid=ee40278e3f4d9eb0fe19bee0000000f2
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling GetDisplayId
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Creating proxy for /org/gnome/DisplayManager/Display1
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    JS LOG: GNOME Shell started at Thu Oct 27 2011 19:43:43 GMT+0800 (PHT)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling BeginVerification
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=InfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received InfoQuery (gdm-password, Username:)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SelectedUserChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SelectedUserChanged (vic)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultLanguageNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=DefaultSessionNameChanged
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received DefaultSessionNameChanged (gnome)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=SecretInfoQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received SecretInfoQuery (gdm-password, Password: )
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling AnswerQuery
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Problem
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Problem (gdm-password, Authentication failure)
    JS LOG: error: Authentication failure
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=ConversationStopped
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received ConversationStopped (gdm-password)
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling Cancel
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Reset
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Calling StartConversation
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: obj_path=/org/gnome/DisplayManager/GreeterServer interface=org.gnome.DisplayManager.GreeterServer method=Ready
    (gnome-shell:1133): GdmGreeter-DEBUG: GdmGreeterClient: Received Ready (gdm-password)
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x8062560
    gnome-session[1036]: DEBUG(+): Got callback for signal 15
    gnome-session[1036]: DEBUG(+): GsmManager: Logout called
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.7
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1036]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, 9, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1036]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received SaveYourselfDone(success = True)
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xb5c11fc8, FALSE, 3, c, 32771, 0)
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1036]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1036]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]')
    gnome-session[1036]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1036]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011e48
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1036]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: Client '0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000]' received CloseConnection
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa00d0c0
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1036]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xa00d0c0 [gnome-shell 10acccb988624d95d5131971581226572800000010360000])
    gnome-session[1036]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa011cc8
    gnome-session[1036]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1036]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1036]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1036]: DEBUG(+): Unreffing manager
    gnome-session[1036]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045408
    gnome-session[1036]: DEBUG(+): GsmStore: Unreffing object: 0xa045480
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1036]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1036]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1046): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Last edited by vic (2011-10-27 13:51:21)

    wonder wrote:
    vic wrote:
    wonder wrote:what's your user id?
    when asked for uuid/uid?... I put 100. I thought any random number would do...
    look in /etc/pam.d/gdm-password
    in arch and in general >= 1000 are  normal users, < 1000 system users
    is that how it works? can i change it from 100 to 1000 or just make a new one?
    anyways i'll look to it.

  • Demo servlet IsItWorking doesn't work after fresh install

    Hello,
    We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
    The installation completed succesfully, but
    when trying to run the demo servlet IsItWorking, we get error 'The page cannot
    be displayed'
    The apache error_log file contains following lines:
    [Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
    9809)
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9811 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9812 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
    (Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
    normal operations
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9819 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9820 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9821 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9822 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
    restarting.
    [Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
    9824 (group group1, module JServ), and inserted in proctable as entry 0
    Any idea?
    Thanks

    Hi -
    I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
    This is a sample of my error_log:
    [Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
    [Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
    [Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
    [Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
    I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
    Did you find a way to fix this?
    Thanks!!!
    Heather

  • My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

    My URL/address bar is missing after the Delicious update.
    My search engine drop down menu is missing after the Delicious update.
    I can't figure out how to turn them back on, please advise, thanks.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Sound missing after installing windows 8.1 pro.

    hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
    product name:  laptop hp 620.
    a day before this, i had windows 7 and everything worked fine.  tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

    Hi:
    The only suggestion I can offer would be to try a W8.1 IDT audio driver...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

  • All clips missing after import from camcorder!

    All clips are missing after import from camcorder - Canon ZR20.  For some tapes all clips are there, for others there are none.  All the files are there in the finder, but I don't know how to have them show up in Final Cut Pro X.
    Any suggestions?

    Ok - this is frustrating.  I have been importing my old miniDV tapes again into FCPX as I wasn't able to transfer all of these projects from iMovie - don't get me started...  After importing about 7 of the tapes the first 3 came in fine, but the last 4 didn't have any clips as I said in my original posting.  Now after restarting FCPX a couple of times all of a sudden the clips are all coming in!  Strange!  Guess I'm OK now.

  • I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • BB App World Icon Missing After Upgrading to OS 4.0.0.65

    Hi,
    i'm using blackberry bold 9780.
    after upgrading to OS 4.0.0.65 my BB app world was missing. i have tried to reboot and re-install the app world but it doesn't work...
    appreciate that someone can resolve this..
    Solved!
    Go to Solution.

    Hi liedia
    Welcome to BlackBerry Support Forums
    Try this Knowledge Base :
    KB29422  BlackBerry App World icon is missing after upgrading to BlackBerry App World 4.0.0.63 to 4.0.0.65
    In addition who is your Carrier ? please edit your profile and remove your mobile number .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • URGENT help needed:Address data missing after QA Refresh from PRD

    All,
    Address data for almost all user-ids are missing after QA Refresh from PRD.
    In QA, after importing the User-Master although its shows successful. The detailed log shows:
       Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
       Exit program AFTER_IMP_ADDRESS3 successfully executed
       SAP user has no address SAP*
       Error while deleting ADRVP for SAP*
       SAP user has no address SAPCPIC...
       ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
    We also do a Table export - import wherein the tables
    USR03
    USR07
    USR09
    USR20
    USR21
    USR30
    are included.
    The no. of entries exported and imported are same.
    Also FYI in the User-master Transport i can see the following Tables included in the object list
    USR01
    USR02
    USR04
    USR05
    USR06
    USR08
    USR14
    USR21S
    USR22
    USRACL
    USREXTID
    USREXTIDH
    Has anyone seen this before?
    Any body has any ideas?

    Hello Bidwan,
    I think it is an issue with company address. Just check if  company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
    If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
    Regards.
    Ruchit.

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • Sound effects missing after 2.0 update?

    Anyone else notice their sound effects (click, etc.) went missing after the 2.0 update? (and yes, "both" is checked under settings). Just wondered if this is universal or if something went haywire with mine...

    Sweet! The power of the collective on the web...
    Jeff - try this, worked great -
    unfortunately i lost all my info on my touch when doing this, but I can dedicate some time tonight to resetting my wallpaper, my mail settings, etc.
    i think the 'DFU' in these instructions means device firmware upgrade...found this on another forum where people complaining of same problem...
    1. Hold both the home and power buttons until the device turns off
    2. EXACTLY one second after the iPod turns off, release the sleep/wake button, holding the home button still ( the apple logo SHOULD NOT BE ON ).
    3. In about 20 seconds, you will see your iPod appear in iTunes, but the screen on your iPod will still be off. You are now in DFU mode.
    4. RELEASE the home button as soon as your iPod appears iTunes. If you fail to do so, your iPod will simply go back into recovery mode.
    yo Apple - please roll out some info on this 'known issue'; While $9.95 isn't a budget-breaker, if you have to figure out how to make that $9.95 work on your Apple device like it appears some of us are, it speaks to posting something in Support about it - thanks!

  • Spry Validation Textarea Widget "error: missing ) after argument list"

    Hi all,
    I'm trying to apply validation on textarea in one of my forms but it keeps giving me the same error msg in Firefox "missing ) after argument list". Funny thing is that the line witch initiate the textarea object is one on one from the Spry Framework Documentation!
    Here is fragment of the form code:
    <label id="cContentCont">
         <span class="cFormTag">Comment: <span id="charCounter"></span></span>
         <textarea name="comContent" id="comContent"></textarea>
         <span class="textfieldRequiredMsg"></span>
    </label>
    Here is the code that initialize this object:
    var sprytextarea1    = new Spry.Widget.ValidationTextarea("cContentCont" {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"} ) ;
    I have also 2 other text inputs befor that element and they are working just fine befor i initiate that particular textarea!
    I can't see an error or missing argument in this line, please if somebody encounter the same problem and have solution I be glade to share his experience!
    Thanks !

    Your code is missing a comma after "chars_remaining" as in
    var sprytextarea1 = new Spry.Widget.ValidationTextarea("cContentCont", {maxChars:100, counterType:"chars_remaining", counterId:"charCounter"});
    Hope this helps,
    Ben

Maybe you are looking for

  • Return Order

    Hi guru's In my case-->Return orders"X"and "Y" both generated credit memos based on the quantity of the return order, even though the post goods issue quantity was less.  The credit memos had to be cancelled and the quantities in the return orders ch

  • ClassNotFoundException trying to load classes in a .war file inside an .ear file

    Hi. I've deployed an EJB2 enterprise app as an ear file on WebLogic 6           without errors. The ear file contains web app and ejb components in war and           jar files. The web component is set to be the default web app in the           confi

  • I can't load a webpage from the cd. please help me

    hello Firefox team, i am having a Photoshop tutorial as a html page in a cd. when i try to load that cd i can't view the tutorial video.

  • How to Trace Publishing errors in CS3

    Using Flash CS3 (updated 9.0.3, AIR 1.1) on a Mac (10.5.5) and my AIR files that were publishing fine a month ago are now not publishing at all (even though it's telling me the AIR file has been created). Found this on adobe.com: quote: * There's no

  • Header text languages

    Hi,     How can I print the header text language on the report that exist for a given sales order no. e.g. for a given 0005500001 sales oder , header text exists in which of the languages. how  can I print it on a report. How can I get that languages