Openldap services not starting

hi
After installing the hss(11x) and other products we are unable to start the openldap services.We are getting the error "ConfigurationManager:The specified values does not exist in the registry".
So please let us know a solution to the issue faced and also how to prevent this from happening again.
thanks in advance
cheers
krishnatilak

hi john
After the reboot the OpenLDAP service exists but not in start state.
Find below the error whcih occured when we tried to start the service using a batch script:
C:\Documents and Settings\nagaraju.kondadi>C:\Hyperion\products\Foundation\openLDAP\startService.bat
System error 1058 has occurred.
The service cannot be started, either because it is disabled or because it has n
o enabled devices associated with it.
System error 1058 has occurred.
The service cannot be started, either because it is disabled or because it has n
o enabled devices associated with it.
Please let us know on how to solve the issue faced and ensure it doesn't happen again as the OpenLdap servcies have always been not stable during the installation for system 9.Hope this is solved in version 11.
cheers
krishnatilak

Similar Messages

Hyperion S9 OpenLDAP service not starting

Over this past weekend there were some issues with our back up software which was upgraded. As a result, we can not get the Hyperion S9 OpenLDAP started. When we try the serivce just hangs and does not complete. We have let it run for up to 30 minutes with no success. We have tried to reconfigure shared services, but that hangs as well. We have tried to reboot the server, but that hangs also trying to start the LDAP service. Can anyone offer any ideas on what we can try to get this service running?
Thanks, Scott

Visit the below URL for a possible solution:
[http://businessintelligence.ittoolbox.com/groups/technical-functional/hyperion-admin-l/problem-wtih-start-the-hyperion-sharedservices9-openldap-service-2430412]
Cheers,
-Natesh

Hyperion S9 OpenLDAP Service Not Started

Hi,
When I start Hyperion S9 OpenLDAP service I received an error Windows could not start the Hyperion S9 OpenLDAP on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 21.
Could you please how I can solve this error?
Hyperion Version 9.3.1
Thanks In Advance,
Bishoy Sami

Hi,
Open Ldap Berkely db is probably corrupted. Check out below post.
Re: Ldap and shared services are not running
Cheers,
Alp

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Apple mobile device service not started

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows

Apple mobile device service not started please help

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get?

Oracle distributed document capture service not started

Oracle distributed document capture service not started
and timeout

I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32

Critical Services Not Starting Automatically & Access to Server occasionally dropping out

For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al

I have updated itunes but now phone and ipod will not connect to pc - message reads apple mobile device service not started

i have updated itunes and cannot connect devices - apple mobile device service not started?

Hello there, mikemason5.
The following Knowledge Base article provides some great troubleshooting recommendations:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

EPMA server service not started

Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
mady

Hi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event>

Fix for Apple Mobile Device Services not starting

Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.

Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
Thanks

Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

When trying to sync my iPad to iTunes, I get the message that iPad cannot be used as the Apple Mobile Device Service not started.

When trying to sync my iPad to iTunes, I get the message that iPad cannot be used because Apple Mobile Device Service not started.

If you are on a PC then there are instructions here for starting it http://support.apple.com/kb/TS1567 . If you are on a Mac then see this page http://support.apple.com/kb/HT1747

I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE

Openldap services not starting

Similar Messages

Maybe you are looking for