Openning a File from Unix OS

Hi
I have a File name and path that is located in Unix Dir.
My ALV report displays this file name as one colum in the list.
When user clicks on this file name that file needs to opened in a new window.
This file can be *.PDF, *.jpg or *.doc
Any one has any idea how this can be done.
Thanks a lot in advance
Ramesh

Similar Messages

DATA TRANSFER - How to get a SINGLE SPACE in downloaded txt file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Its there, I am talking abut this -
OPEN DATASET - linefeed
Syntax
... WITH { NATIVE
         | SMART
         | UNIX
         | WINDOWS } LINEFEED ... .
Alternatives:
1. ... WITH NATIVE LINEFEED
2. ... WITH SMART LINEFEED
3. ... WITH UNIX LINEFEED
4. ... WITH WINDOWS LINEFEED
Effect
: These additions determine which line end marker is used for text files or legacy text files. If these additions are used, the profile parameter abap/NTfmode is ignored. Simultaneous specification of the values "UNIX" or "NT" in the addition TYPE is not permitted.
If these additions are not used, the line end marker is determined as follows, depending on the operating system of the current application server:
The line end marker for Unix is "LF". Under Unix, OS390 and OS400, only "LF" is used for reading and writing.
The line end marker for MS Windows is "CRLF". Under MS Windows, however, the values of the profile parameter abap/NTfmode can also be used to set whether new files are handled according to Unix conventions or Windows conventions. If the profile parameter has the value "b", the Unix line end marker "LF" is used. If the profile parameter has the value "t" or is initial, the Windows line end marker "CRLF" is used. The setting using the profile parameter can be overridden with the addition TYPE and the value "UNIX" or "NT". If an existing file is opened without the addition TYPE, this is searched for the first line end marker ("LF" or "CRLF"), and this is used for the whole file. If no line end marker is found, the profile parameter is used. This applies particularly if an existing file is completely overwritten with FOR OUTPUT.
If an addition WITH NATIVE|SMART|UNIX|WINDOWS LINEFEED is used, this setting can be changed for the open file using the statement SET DATASET. If neither of the additions is used, the line end marker also cannot be changed using SET DATASET.
Notes
: Without the use of an addition WITH LINEFEED, the line end marker is dependent on diverse implicit factors such as the operating system of the application server, a profile parameter, and line end markings that are already used. For this reason, the explicit use of WITH LINEFEED is recommended, which renders the use of the addition TYPE for setting the line end marker obsolete.
The line end marker that is currently used can be determined for every open file using GET DATASET.
Alternative 1
... WITH NATIVE LINEFEED
Effect
: This addition defines the line end marker independently of the access type according to the operating system of the application server, i.e. "LF" for Unix OS390 or OS400, and "CRLF" for MS Windows.
The line end marker is interpreted according to the current codepage. If a code page is explicitly specified using the addition CODE PAGE, the characters of the line end marker must exist be available or be written in accordance with this code page.
Note
: The addition WITH NATIVE LINEFEED is intended for editing files on an application server that can also be accessed by other means. The addition receives the appropriate line end marker without the program needing to know the operating system.
Alternative 2
... WITH SMART LINEFEED
Effect
: This addition depends on the access type:
In files that are opened for reading using FOR INPUT, both "LF" and "CRLF are interpreted as a line end marker. When opening an EBCDIC file with the addition CODEPAGE, in addition to "LF", "CRLF", and the EBCDIC character strings, the corresponding ASCII character strings are also recognized. In addition, the EBCDIC character "NL" (line separator) is also interpreted as a line end marker.
In files opened for appending or changing with FOR APPENDING or FOR UPDATE, the program searches for a line end marker that is already used in the file. In this process, first the end of the file is identified. If no line end marker is found there, a certain number of characters at the beginning is analyzed. If a line end marker is found, this is used when writing to the file. This is also affected by the addition CODE PAGE. For example, ASCII line end markers are recognized and used in a file opened with EBCDIC, but not the other way round. If no line end marker is found or no search is possible (for example, if the file is opened with the addition FILTER), the line end marker is determined according to the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
In files opened for writing using FOR OUTPUT, the line end marker is determined according the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
Note
: The addition WITH SMART LINEFEED is intended for the generic editing of files in heterogeneous environments. The line end marker is recognized and set for different formats. The use of this addition is the best solution for most application cases.
Alternative 3
... WITH UNIX LINEFEED
Effect
: The line end marker is set to "LF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available or be written according to this code page.
Note
: The addition WITH UNIX LINEFEED is intended for editing Unix files in which the specific line end markers are to be retained, even if the operating system of the current application server is MS Windows.
Alternative 4
... WITH WINDOWS LINEFEED
Effect
: The line end marker is set to "CRLF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available and be written according to this code page.
Note
: The addition WITH WINDOWS LINEFEED is intended for use with MS Windows files in which the specific line end marker is to be retained, even if the operating system of the current application server is Unix, OS390 or OS400.

Download file from UNIX to EXCEL problem

Hi,
I am trying to download file from UNIX server to excel file, there is one column which is messing up and that is number 100000000000000002 (18 in length) it is writing as 1E+17, funny thing is when I click on that cell it is showing as
100000000000000000.
I am using GUI_DOWNLOAD to download to excel, below is the output excel format, I am talking about 4th value from left
GUID    leg_reg     lic_type     lic_num     ex_lic_num     vali_from     valid_to     created_by
3E633B85C05E6F28E100     EAR     ENC     1E+17     ENC     20030305     20930305     VANRIJ
below is the program I am using to download the output from UNIX to excel
FORM get_data_file.
OPEN DATASET p_unxfil FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    DO.
      READ DATASET p_unxfil INTO input_file_tab-line_string.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      APPEND input_file_tab.
      CLEAR input_file_tab.
    ENDDO.
ELSE.
    PERFORM write_message USING 'ZZ' 'E' '000'
      'Unable to find file' p_unxfil
      ' Press Enter key to exit.' ''.
ENDIF.
CLOSE DATASET p_unxfil.
DESCRIBE TABLE input_file_tab LINES record_cnt.
ENDFORM.                    " get_data_file
FORM create_pc_file.
DATA: l_file TYPE string.
MOVE p_pcfile TO l_file.
Save the file
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = l_file
    TABLES
      data_tab                = input_file_tab
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc NE 0.
    WRITE: / 'Error creating pc file', p_pcfile.
    EXIT.
endif.
I will assure of points.
Thanks for your help
Sarath

It is not the problem of your program. This happens becuase of the "nature" of the excel. You need to retain the text property of that column.
Try like this:
1. Download the file in .txt
2. Open Excel .. blank sheet
3. Now, click on Open. Select your .txt file
4. One pop up will come ..."Text Import Wizard"
5. Select the fixed width or Delimited ... Press Next ...
6. Select appropriate delimitors or fixed length .. press Next
7. Select your coulumn (which has the problem), Select the "Text" radiobutton on the upper-right corner and finish.
Regards,
Naimesh Patel

Upload a file from unix environment

hi
does anybody know which fm to use to upload a file from unix environment?
anjali

hi sia,
try this.
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
rgds
anver

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

The problem i am having is when i go to open a file from the menu bar that as "FILE" is blackcolor

the problem i am having is when i go to open a file from the menu bar that as "FILE" is all black in color and i cant see what i'm picking how do i change that so i can see what i'm picking

Is that Photoshop? Depending on the version you could try to change the Color Theme (Edit | Preferences | General | Appearance).
If that does not help, you may have a better chance to get a useful answer if you ask in the Photoshop or Photoshop Elements forum.

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Excel 2008 wont open excel files from at WHS network share.

hi all
i have a strange problem here, i own a mac mini the 2.53ghz model bought a month ago, and a macbook (the white model) also bought a month ago, both running all the latest software updates, and office 2008 for mac, with all the latest updates
on the mac mini, i can´t open any excel documents that are stored on a shared folder on my windows home server, it just says
excel cannot open this file the file might have been damaged or modified from its original format
but when i try to open the same document on the macbook, it opens just fine?
i have tried to remove office 2008 and reinstall it on the mac mini, but that didnt help, and the strange thing is if i move the excel files, from my windows home server, to another windows home server, it opens just fine on the mac mini
i then suspected that it was the WHS that was ****** up, and deleted the account on the WHS where the folders were stored, rebooted the whs, and added the account again, but with the same result, the mac mini wont open the excel files, it will open word files, from the same folder.
and the macbook will still open both excel and word files, from the same folder?
i´m really confused now, and cant seem to pinpoint the error, and hope that someone can give me some pointers of where to look?
sincerely
Carsten Larsen
Denmark

You're pobably better off posting your question on Microsoft's own forums for their Mac products, as it's their software you're having issue with:
http://www.officeformac.com/productforums

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

Unable to open CS3 Files from within the application

Good Afternoon
I work as IT Support for company looking after 10 ADOBE Creative Suite 3 end-users.
One of my colleagues is unable to open Illustrator or Photoshop files from within their respective applications, but she is able to open them from outside ok.
I have reinstalled ADOBE CS3 and this appeared to resolve the issue, only for it to return again a day later.
She has no other applications or processes running during her attempt to open a file from within CS3.
She will click on Open and the 'Open File' window will flash up for a split second, then the whole application will be frozen. It is as if the 'Open File' window is there, but isnt there because we cant click on it, but the application thinks it is displaying and so she can not click on anything else. The only way to close the application is to end the process under Task Manager.
While I am sitting here tearing what little amount of hair I have on my head, can anyone point me in the right direction?
Is this a Windows problem or an ADOBE problem do you think?
I look forward to any replies.
Thank you

Hi Bob
Ok...
Opened illustrator but was unable to open the 'Open File' window.
Changed the screen resolution, it suddenly worked!
Changed the screen resolution back to as it was before, it also worked.
What could cause this do you think?
By simply changing the screen resolution and back again, the 'Open File' window displayed itself.
Very bizarre!

Openning a File from Unix OS

Similar Messages

Maybe you are looking for