OpenOffice/Go-Office Export to PDF General Input/Output Error

Okay so I am using the openoffice 3.2 from the latest go-office package.
Whenever I try to export something as a pdf, it gives me the following error message in a little window:
Error saving the document: Untitled 1
General Error.
General Input/Output Error.
I have checked to make sure that I have installed all of the optional, PDF handling packages for openoffice, but I still get this message. It's odd though, it does export the document to a PDF, but the quality of the font and the images is really bad.
Is there any way to fix this? Is this something I need to do a downgrade to fix? Do I need to install the openoffice package instead?
Last edited by Dr Belka (2010-04-26 21:13:29)

http://user.services.openoffice.org/en/ … =7&t=29979
[SOLVED]
I'm so confused
Last edited by itsbrad212 (2010-05-08 02:23:49)

Similar Messages

Error loading BASIC document. General Error. General input/output error".

Error loading BASIC document. General Error. General input/output error".

I guess your problem is related to StarOffice8, right?
I had the same issue after upgrading StarOffice7 to StarOffice8:
http://forum.java.sun.com/thread.jspa?threadID=5287604&tstart=0
Apparently the .StarOffice8 directory in your export/home directory was created based on .StarOffice7
directory. Probably here something went wrong. Maybe a bug.
So the solution is very simple:
rm -r .StarOffice8 in your export/home directory and restart StarOffice8.
Or you can also rename the directory.

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
Please some one help on this

You need to try exporting the first half of the book.
If that exports ok then export the other half of the book.
Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
For example if your book is 128 pages long:
1. Export pages 1 - 63
2. If these Fail to Export then
3. try exporting1-32
4. If these Fail to Export
5. then try exporting1-16
If it doesn't fail (step 2)
Then export pages 64-128
and 64-90 etc.
until you find the pages causing the issues.

Disc image input/output error

When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin Open error 5: "Input/outp

Please can any one help.
All sound has disappeared from my imac, it just 2 years old, I've run disk warrior and disk repair/verify and this is what come up.
ARe there any solutions?
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/ja/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/sc/BE/unk.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/char.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/dicrc
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/matrix.bin
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/sys.dic
Open error 5: "Input/output error" on usr/lib/mecab/dic/apple/tc/BE/unk.dic
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeDirectory
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeResources
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/CodeSignature
Open error 5: "Input/output error" on System/Library/Extensions/AppleSMBIOS.kext/Contents/_CodeSignature/CodeRequirem ents
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/PlugIns/AppleSM56KU SBModemFamily.kext/Contents/_CodeSignature/CodeRequirements
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/Resources/English.l proj/InfoPlist.strings
Open error 5: "Input/output error" on System/Library/Extensions/SM56KUSBAudioFamily.kext/Contents/_CodeSignature/Code Requirements

Whew, generally those errors would indicate a serious Hard Drive problem, but possibly RAM or Logic Board... any other drives connected?
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029

Failed to execute default file manager (Input /Output Error) [SOLVED]

I'm having an issue in XFCE where the default Terminal, Browser and File Manager launch correctly - but with this error:
Failed to execute default [file manager] [terminal emulator] [browser]
Input /Output Error
I have the requisite "Preferred Application" set as Chrome/Thunar/xfce4-terminal.
If I run
exo-open --launch FileManager
From terminal, it says:
[1] 4281 segmentation fault (core dumped) exo-open --launch FileManager
Remember, it launches the app successfully - and the apps themselves launch correctly, it's only exo-open that I have a problem with! Everything else works great on this system.
Last edited by yochaigal (2015-04-28 11:10:06)

demolitions wrote:
I got the same problem, I observed the problem appearing with those lines in "dmesg", the same library (libpthread-2.21.so) is also present in other software errors (critical and not) since my last update (friday 24th).
I'll try downgrading glibc, see if that works around the problem.
[ 587.042204] traps: xfce4-terminal[1022] general protection ip:7f6500100150 sp:7ffe14c978d8 error:0 in libpthread-2.21.so[7f65000ee000+18000]
[ 592.113288] traps: xfce4-terminal[1026] general protection ip:7fbf1c97a150 sp:7ffe2f916188 error:0 in libpthread-2.21.so[7fbf1c968000+18000]
[ 620.913826] traps: xfce4-notifyd[494] general protection ip:7fa4859a2150 sp:7fff84dd7708 error:0 in libpthread-2.21.so[7fa485990000+18000]
[ 974.008983] traps: xfce4-terminal[1384] general protection ip:7f519df84150 sp:7ffe3573e4f8 error:0 in libpthread-2.21.so[7f519df72000+18000]
[ 974.850083] traps: xfce4-terminal[1387] general protection ip:7f6ed57f8150 sp:7ffec58369c8 error:0 in libpthread-2.21.so[7f6ed57e6000+18000]
[ 975.521687] traps: xfce4-terminal[1390] general protection ip:7f5e91d00150 sp:7ffd70179d18 error:0 in libpthread-2.21.so[7f5e91cee000+18000]
[ 979.179030] traps: exo-open[1393] general protection ip:7fbdd2a24150 sp:7ffe9e0c5608 error:0 in libpthread-2.21.so[7fbdd2a12000+18000]
[ 984.286944] traps: exo-helper-1[1395] general protection ip:7fd5d8473150 sp:7ffd53706a08 error:0 in libpthread-2.21.so[7fd5d8461000+18000]
[ 1012.318773] traps: xfce4-terminal[1502] general protection ip:7ffb62b1b150 sp:7fffd5c986f8 error:0 in libpthread-2.21.so[7ffb62b09000+18000]
[ 1101.456187] traps: xfce4-terminal[1521] general protection ip:7f3285cf2150 sp:7fff3c6df158 error:0 in libpthread-2.21.so[7f3285ce0000+18000]
[ 1102.120447] traps: xfce4-terminal[1525] general protection ip:7fdd50c3a150 sp:7ffe96656ce8 error:0 in libpthread-2.21.so[7fdd50c28000+18000]
[ 1103.246180] traps: xfce4-terminal[1529] general protection ip:7f93f2b49150 sp:7ffc539d34e8 error:0 in libpthread-2.21.so[7f93f2b37000+18000]
[ 1103.976302] traps: xfce4-terminal[1532] general protection ip:7f6a55204150 sp:7ffd13eb77f8 error:0 in libpthread-2.21.so[7f6a551f2000+18000]
[ 1118.718286] traps: xfce4-terminal[1953] general protection ip:7efc94fb9150 sp:7ffd6f5fbed8 error:0 in libpthread-2.21.so[7efc94fa7000+18000]
[ 1160.851856] traps: xfce4-terminal[1992] general protection ip:7f39aaddb150 sp:7ffdb4478aa8 error:0 in libpthread-2.21.so[7f39aadc9000+18000]
[ 1165.279367] traps: xfce4-terminal[2004] general protection ip:7f3a50756150 sp:7ffd743c07b8 error:0 in libpthread-2.21.so[7f3a50744000+18000]
[ 1173.696850] traps: xfce4-terminal[2008] general protection ip:7f0930b98150 sp:7ffc5cd54e78 error:0 in libpthread-2.21.so[7f0930b86000+18000]
[ 1177.567234] traps: xfce4-terminal[2011] general protection ip:7f5ea2222150 sp:7ffd81d4e898 error:0 in libpthread-2.21.so[7f5ea2210000+18000]
Tried downgrading glibc from 2.21-3 to 2.21-2 as this is the package which contains libpthread.so, and on my other arch workstations I don't have the issue, but to no avail, same error box pops up when using exo-open, and my IDEs are not starting.
I'll try comparing installed packages versions on both workstations.

[solved] NFS: "ls: reading directory .: Input/output error" after time

Hello,
I got the following configuration:
NFS-server: Always on, connected via LAN.
NFS-clients: 2 computers, connected via LAN and WLAN. On standby: auto umount NFS-share via system-sleep-hook with systemd.
This works flawlessly some hours or even days. But after some time, the following happens:
1. mount nfs-share: no error message
2a. trying to access that folder via filemanager, e.g. thunar: folder seems to be empty (it isn't on server!), but the correct freesize of the NFS-share on server is displayed in the statusbar.
2b. trying to access that folder via commandline:
$ ls
ls: reading directory .: Input/output error
The very same worked just a few hours before, I haven't changed anything meanwhile. Apart from standby (--> auto umount NFS-share) and resume (manual mount NFS-share) on the clients which worked before, too.
Any idea what's going wrong?
additional info:
server:
/etc/exports
/srv/nfs/myshare 192.168.2.0/24(rw,all_squash,anonuid=33,anongid=33,no_subtree_check)
(yes, the mapping is needed and right.)
clients:
/etc/fstab
servername:/srv/nfs/myshare /home/carl/nfs nfs4 noauto,soft,user,_netdev,timeo=14,rsize=8192,wsize=8192 0 0
/usr/lib/systemd/system-sleep/umount-nfs
#!/bin/sh
case $1 in
pre)
umount -f /home/carl/nfs
esac
Last edited by Carl Karl (2014-09-21 17:07:47)

Indeed, there could be something interesting in dmesg on the server:
[ 4.190117] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 4.190596] NFSD: starting 90-second grace period (net ffffffff818a9540)
[ 5.445237] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5.895519] r8169 0000:04:00.0 enp4s0: link up
[ 5.895529] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[72346.265850] usb 3-1: USB disconnect, device number 2
[72346.670926] usb 3-1: new SuperSpeed USB device number 3 using xhci_hcd
[72346.684585] usb-storage 3-1:1.0: USB Mass Storage device detected
[72346.684716] scsi5 : usb-storage 3-1:1.0
[72347.686518] scsi 5:0:0:0: Direct-Access WD Elements 1048 1022 PQ: 0 ANSI: 6
[72347.687606] sd 5:0:0:0: [sdc] 976769024 512-byte logical blocks: (500 GB/465 GiB)
[72347.690295] sd 5:0:0:0: [sdc] Write Protect is off
[72347.690301] sd 5:0:0:0: [sdc] Mode Sense: 47 00 10 08
[72347.692981] sd 5:0:0:0: [sdc] No Caching mode page found
[72347.693025] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[72348.135398] sdc: sdc1
[72348.141458] sd 5:0:0:0: [sdc] Attached SCSI disk
[72348.455737] EXT4-fs (sdc1): recovery complete
[72348.455919] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[74276.020331] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
[74276.021107] EXT4-fs error (device sda1): ext4_find_entry:1310: inode #14024711: comm nfsd: reading directory lblock 0
(last one repeats several times...)
Indeed, the NFS-share resists on a external WD harddrive connected via USB, /dev/sdc1.
As suggested in the NFS wiki article, the NFS-share is a bind-mount:
/etc/fstab on server:
# fake-root for NFS
/magnet/owncloud/data/carl/files /srv/nfs/myshare none bind,noauto,x-systemd.automount
while /srv is on /dev/sda1.
The external harddrive has an auto-standby (NOT hdparm...) which isn't causing troubles with other services.
So it seems to be a problem connected to this bind-mount to external USB setup....
I'll try to find out whether there is a way to avoid that.
Thanks so far!
Last edited by Carl Karl (2014-09-16 14:30:02)

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

External Hard Drive not Readable & Input/Output Error?

I was using my OWC 300gb external hard drive for a while and it's worked great. I had a bunch of files on it, but I recently transferred everything to another external HD I have, which worked fine, so I could erase this 300gb one. I can't remember what happened, but somehow my Macbook doesn't recognize this hard drive. I think erased everything and then unplugged it without ejecting it first. Anyways, nothing is on the the drive anymore and I get this error message:
"The disk you inserted was not readable by your computer"
This pops up when I restart my Macbook. When I try to use Disk Utility, it greys everything out on the partition and Disk Repair tabs. On the 'Erase' tab, it will allow me to select Erase, but then gives me the error:
"Input/Output error"
Does anyone know how to get my Macbook to see my drive (so I can start to partition it)? For some reason only Disk Utility acknowledges it's there, Finder won't.
Anyone have any tips of what it is or what I can try? I did try to use my OS discs booting up holding C, but that doesn't work either.

Hi there. Everyone is saying on these forums that the hard drive is failing...suck. I went and bought a new when I got input/output error and found that the new one showed the same input output error, making it impossible to partition the disk. Then the guy in the apple service center told me the new one was bad too, after having seen the code that came up related to my new scorpio 250 GB drive. Instead of sending it back, I took it out and installed the old one..however this time with a slihtly more of pressure on the tape holding down the hard drive cable between the hard drive and the circuit board. Amazingly, this time it didn't even show any hard drive at all! Then I understood what was wrong. It was exactly what was indicated an "input/output errror"! ..the cable was broken. I bought a new cable, well the Powerbookmedic sold it as new but it was an old working one that arrived. Immediately, after change of cable the old hard drive and now also the new 250 GB works perfectly! I remember that some interesting symptoms prior to all hard drive problems appeared, such as not being able to start up properly, strange blue screens, flipping question marks etc. I remember that shaking the comp occasionally worked to get it going. No wonder, shaking occasionally made it work and i believe the damaged cable maybe changed position and started conducting. The cable is very sensitive and probably should not be taped down so hard as the first service center guy at apple had done with mine when he fixed it the comp a few years ago. Polymers/plastics bent heavily become fragile/brittle with time and are specially sensitive under pressure/bent. Note that my old damaged cable still conducted and showed the hard drives but didn't work fully. I hope this will help someone, it took me 2 month to figure out..

External HD - Input/Output Error

I had external drive that was not mounting or appearing on Disk Utility. The drive was out of warranty so I went ahead and changed the casing.
1.The drive appears on Disk Utility but still does not mount. DU only shows the root and not the volume.
2.Connecting it via USB tells me the drive is 298GB and appears as Maxtor 5000DV v0.1.00.00 Media. I connect it via Firewire 400 and it DU shows it as 128GB Maxtor.
Any help on what's going on here? DU also won't let me First Aid, Erase, or anything else on it. After I try to Erase it,Partition it, or anything it gives me "Input/Output Error".
10.5.2
Maxtor External (Actually a Seagate inside)
G5
Thanks for any help!

Adding:
What is the point of "Restore" and how is it used exactly?
Thanks!

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

OpenOffice/Go-Office Export to PDF General Input/Output Error

Similar Messages

Maybe you are looking for