Opens mobile data by it's self !!!

hey
scince i updated my mobile's software to " symbian belle refresh " it opens mobile data everyday at 00 : 00 !!
at the beginning of every new day it just turns itself on !
and that made me lose alot of money
help plz
notes :
1 - the problem statred after updating to " symbian belle refresh "
2 - it happens every day at the beginning of it
3 - there is no apps working in the background
4 - it's turned of at 23:59 and it's on at 00:00 !
help
my mobile is nokia C7

You could try to check if it's a specific app that opens the mobile data connection. Select Settings > Connectivity > Connection manager and long press the mobile data connection and select Details, You should then be able to see in Apps the application that is using the mobile data connection.

Similar Messages

HT203175 when opening safari screen tells me i am not subscribed to mobile data service.In top left it tells me i am connected to 3g

when opening safari it tells me I am not subscribed to mobile data. This has happened to my I pad2 and I phone since downloading IO6

No carrier "automatically" unlocks at end of contract - many won't do it at all, even if requested. I don't know what your carrier's policy is since you didn't say what country you're in.
However, if I understand you correctly, you didn't change carriers so it doesn't matter if it was unlocked or not. Try the following steps, as needed:
1. Reset phone - press both home and sleep/wake buttons for at least 19 seconds until the Apple logo appears
2. Settings > General > Reset > Reset Network Settings
3. Restore phone in iTunes using a backup
4. Replace SIM card (don't care what Telstra says)
5. Restore phone in iTunes as new, without using a backup
6. Take phone to Apple.

When I open firefox android, my wifi and mobile data switch off on HTC one M7

I cannot surf the net with firefox on my HTC one M7 as of this week.
Every time I open the browser, it closes my wifi and mobile data, meaning I get the error 'server not found'
i tried removing it and all its add ons, then re-installing...
Just the same.
Anyone help please?

Hi RichyRiches
# I have an HTC One M7 running Firefox for Android 35 with Android 4.4.3. Is that what you are using?
# "Every time I open the browser, it closes my wifi and mobile data, meaning I get the error 'server not found' " - Strange I have no such issue. Any websites in particular? Or is all of them? Do other web browers work?
# I don't think this is a Firefox for Android problem. In the past problems like that have been because of WiFi issues caused by firewalls. Please check with your ISP and check your firewall.
Cheers!
....Roland

TS4148 I need to change the mobile data network from Vodafone to orange I need the passwords and address to do it my self

I'm trying to find out the mobile data network info on my iPhone 3GS it's on Vodafone at the moment but I want to use my orange sim so I need to change the pan details help

Assumption ...you are in UK
If you purchased the iPhone from Vodafone it will be locked to them
You will need to request they unlock the iPhone before you can use
it on Orange no other way
In UK Apple are the ONLY source of unlocked new iPhones

When having mobile data off my picture messages wont open?and i dont receive them on time

when i turn on the mobile data on all my picture messages pop up as new messages when they are 2 days old then im able to see them but why? they stop when the mobile data is off.

MMS will not send/receive when on WiFi...They will be held in Que. If you try to send MMS with WiFi on , I have found that even after turning WiFi off, you have to resend the MMS via VZW network. Hth.

Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)

Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.

Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

Ellipsis 7 tablet - drops wi-fi and goes to mobile data w/o telling you, and for no reason?

I don't totally hate my Ellipsis 7 tablet. It does have a nice, bright screen, and it does have a fairly fast processor.
This is where the compliments stop.
1.) It's glitchy. As others have stated, icons do seem to disappear.
2.) It seems to "lose communication" with my high-end Sandisk micro-sd card (that has no other problems when used in my smartphone.)
3.) The battery life could be a lot better - you will charge it every day, even with minimal use.
but my biggest problem with this tablet (which I got from my local Verizon store) is it's "sneaky behavior" with mobile data. I am nearly convinced that these devices are designed, intentionally, to use up your mobile data whenever possible, even when solid wi-fi is available.
Have any of you Verizon Ellipsis 7 users, that use these primarily at home with wi-fi available, noticed a rather large increase in the mobile data being used?
This is sort of long, so I appreciate everyone who takes the time to read this...
Here's my scenario; which I can duplicate.
I live in a place with 2 strong wi-fi networks available. The tablet accesses both of them with no problem. Speed tests show 10Mbps download and 0.768 Mbps upload, the speed we pay for.
One night, I get the text messages from Verizon that I'm close to using all my mobile data. (which I appreciate) But I'd been getting so many texts, emails, etc., that day I didn't look to see what the alert was. My bad! So, I'd gone over and approved $10 to upgrade with one more GB of data. I figured it was a fluke; that somehow I had turned off my wi-fi, or it had gone down, or somehow something happened that made the tablet switch over to mobile data.
...but I was watching more closely now...
less than 24 hours later, I'm getting those messages again! I'd used one GB in less than 24 hours??? So I called Verizon, and we went through the normal putting limits on the device, etc., so it couldn't happen again.
So then, I asked him the simple question? When not 1, but 2, strong wi-fi signals are available, why would this device switch over to mobile data, WITHOUT letting you know???
He couldn't answer that. He transferred me to someone else that was "higher" in techincal support. She was a sweet girl, and really wanted to help me, but she never understood my problem. At one point I said to her, "Look, it's simple. These devices always default to wi-fi if available. What would make them disconnect from wi-fi and go to mobile data instead?" Her answer was that she needed to look up if a tablet was supposed to connect to wi-fi first... uh, OK.
At the end of a very frustrating call, she offered to send me a box to ship it back to Verizon in. They would then decide to repair or replace it. I would be without a tablet for a minimum of two weeks. I said Thanks but No Thanks, I would just disable mobile data entirely. The lady I spoke with did not seem pleased with my decision, but what could she do? And we ended the call.
So, I'm still trying to figure out what is making this thing kick over to mobile data (remember I just shut mobile data off entirely before I hung up with Verizon) and I was currently connected to an external bluetooth speaker (which shouldn't have anything to do with anything, I realize), when I started a video on YouTube.
Now, mind you, I was ALREADY showing connected to a strong wi-fi network.
And up comes a dialog popup, asking me to turn the wi-fi back on, even though I would incur additional charges!
BUSTED, VERIZON!
This message doesn't come up when it tries to switch over from wi-fi to mobile data unless you have completely shut off mobile data.
I only mention that I was connected to an external bluetooth speaker because it is the only way (SO FAR) that I have been able to duplicate this "silent switchover" repeatedly.
If I'm on Youtube first, not connected to my bluetooth external speaker, the device will stay on my wi-fi network when I pause the video, connect to the bluetooth speaker, and then restart the video.
If I'm already connected to the external bluetooth speaker, and then open a browser window or youtube video, the device will attempt to change its connection from wi-fi to mobile data. There is no reason for this!
Yes, yes... I realize that being connected to an external bluetooth device should have absolutely nothing to do with whether the tablet should keep its wi-fi connection or switch to mobile data...
except that it does! And there may be other circumstances that I haven't found yet... I don't know, but I'm watching!
At the end of the day, ANY DEVICE THAT IS GOING TO SWITCH FROM A WI-FI NETWORK TO MOBILE DATA, FOR ANY REASON, SHOULD TELL YOU IT'S GOING TO SWITCH, AND LET YOU DECIDE TO ALLOW THAT CHANGE OR NOT, especially when there is NO REASON for the device to switch in the first place. In the same household are my Samsung Galaxy Note 3 and husband's Galaxy S5. They never exhibit this behavior, and yes, we use internet on our phones at home rather frequently.
Watch your mobile data folks...
Oh, and the Verizon lady called back about 30 minutes later... asking me again to agree to send my tablet in. I explained to her that I could now duplicate the problem. I told her that it would be easy enough for them to check and see if all devices are doing it (which I'm guessing they all do! there's not enough memory to download any apps, so I doubt it's that...) I said that with the millions of Ellipsis 7 devices they have, someone in tech support can grab one and try it. Still no luck, and she still wanted me to send it back and be without a tablet for 2 weeks or more. I declined.
Anyway, if you've read this far, I thank you! I would like opinions as to whether you think this should be happening or not, and whether you have had this happen to you or not with this tablet. Thank you for your time!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

Mobile data entry

Dear all,
I have successfully configured the mobile data entry in SAP. i tested the transaction LM00 and it is working fine on sap gui on pc. can someone explain to me how i will open this transaction on a Windows ce device i am working on SAP ECC 6.0 i have also the pda barcode device. do i need to install something on the pda device? how?
thanks

Take a look at the SAP Console in help ... here is a link to get you started... I will post a better one later in the week as I am away now for a bit.
Search in service place and help also for SAP Console.
http://help.sap.com/saphelp_me21sp2/helpdata/en/22/5074de1b337942a27a98f42de8f622/content.htm

Podcast app still downloads on mobile data when settings say it shouldn't. This has cost me money due to data allowance. Any idea how I can stop this?

This has happened a few times now. It always seems to happen at the start of the month as well so I can not use mobile data for the rest of the month.
Apple are just wasting my money because of a fault in their system. Really need to get this sorted!

This happened to me, too. I found that the new Podcast app goes wild. The iPad was in the computer case all day and ate up 5GB of data, and that was on ATT 3G. Battery power was down to 60% and the iPad was warm. Anyway, I opened "Settings" and scrolled down to and opened "Podcast". There I found a switch to turn off the cellular data for Podcast downloads. Evidently the default setting by Apple is ON... Oh well. I hope that this kills that problem.

IPhone 5 unable to use mobile data, only FaceTime and passbook listed

my iPhone 5 is unable to use mobile data, only passbook and face time are listed, none of my apps. I have tried re setting and this didn't work, mobile data is switched on

Hi Lydia,
It may help to force close all open apps and reset your iPhone.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you still can't enable mobile data for your various apps, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Sincerely,
Allen

TO Confirmation through Mobile Data Entry

Dear All,
I have a query regarding TO confirmation through MDE(mobile data entry) screen.
In the development server, in one user the MDE screens of TO confirmation for picking and put away is working properly.We have created a seperate user in the same server.But here when we are trying to open the transactions LM03 and LM05, we get a message saying 'Logical Screen Cannot be Found'.
I want to know whether we need to maintain any data for every new user that we create, and I would also like to know where and how we need to maintain this data.
Thanks and Regards
Lokesh.

Hi ,
I think you have to maintain the Profile Defination for the User , this can be done by using Tcode SPRO then go to Logistics Execution - Authorization Management- Define Profiles.
or by using PFCG transaction.
Thanks,
Syed Quadri.

Unable to connect to the selected mobile data service, please try again later. If the problem persists please contact your administrator

Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?

Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Why does Mobile Data notification keep coming up saying 'Mobile Data is turned off for "Numbers" and I have to click on OK to get rid of it? I KNOW it's turned off for that program because that is what I want it to be set at. What I DON'T want is to have

Why does Mobile Data notification keep coming up saying 'Mobile Data is turned off for "Numbers" and I have to click on OK to get rid of it? I KNOW it's turned off for that program because that is what I want it to be set at. What I DON'T want is to have to click on OK EVERY TIME I open the program when I'm away from wifi.

That is how it works in general, not just for Numbers. It irritates me on other apps at times, although I can see an argument that if it didn't do that then people would complain about missing functionality after they forgot they had turned data off for an app. At any rate, this is a user to user support forum and we can't do anything about it. If you want to make a suggestion to Apple, following is a place to do that: http://www.apple.com/feedback/

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

Opens mobile data by it's self !!!

Similar Messages

Maybe you are looking for