OpenScript 12.2.0.1 Failed to access the databanks,CSV index file not getting updated
Hi,
I have been working on OATS for quite sometime,Off late i'm facing a unique problem out of nowhere
when i run web functional script i'm getting the error "oracle.oats.scripting.modules.basic.api.exceptions.VariableNotFoundException:"
Even though i have added the required databank,These were working fine for past 6 months suddenly started give me problem.
1 thing i noticed was if i do any modification in the databank CSV file the corresponding INDEX file is not getting updated.Hence the system is unable to read the databank data i guess.
Has anyone faced the same problem?Please help.
Hi,
I have been working on OATS for quite sometime,Off late i'm facing a unique problem out of nowhere
when i run web functional script i'm getting the error "oracle.oats.scripting.modules.basic.api.exceptions.VariableNotFoundException:"
Even though i have added the required databank,These were working fine for past 6 months suddenly started give me problem.
1 thing i noticed was if i do any modification in the databank CSV file the corresponding INDEX file is not getting updated.Hence the system is unable to read the databank data i guess.
Has anyone faced the same problem?Please help.
Similar Messages
-
Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
AbhishekHi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801 -
Distribution Manager Failed To Access The Source Directory
Hello All,
I have this issue distributing content to my Distribution Points for months now. I keep running into this error below:
Distribution Manager Failed to Access the source directory (\\share\folder\file.wim)
Possible Cause: Distribution Manager does not have sufficient rights to the source directory.
Solution: Verify that the site server computer account has at least Read access to the directory you specify as the source directory.
Possible Cause: There is not enough disk space available on the site server.
Solution: Verify that there is enough free disk space available on the site server.
I checked the distmgr.log file and received these messages:
GetTempFileNameA failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
CFileLibrary::AddFile failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
CContentDefinition::AddFile failed; 0x80004005 SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
Failed to add the file. Please check if this file exists. SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
SnapshotPackage() failed. Error = 0x80004005 SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
Failed to take snapshot of package CSU0006A SMS_DISTRIBUTION_MANAGER 3/24/2015 2:15:38 PM 13952 (0x3680)
There is enough space on the site server and the site server has full control over the source directory. I wish I can give you more information but I'm hoping this is enough info to get some assistance. If more information is needed please let me know!We usually give the DP's computer account and the site server computer account read access to these shares in our environment.
... which is not enough for drivers and updates (as there will also files be added).
Torsten Meringer | http://www.mssccmfaq.de
... And for capture Image too if your capture destination points on that share -
Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?
Hi Elijahcross,
If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden -
I purchased a MacPro and upgraded to 2 1T hard drives. How do I access the hard drive that is not the start-up drive?
Have you formatted these new drives yet with Disk Utility? That is the first step.
Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks. If that preference was already set you should see the drives appear after they are formatted. Then they are there for you to use as you wish. -
Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?
If it's an application, it should be in the Applications folder. If in doubt, double click on the hardrive icon to open it up, then press Command+F (find) and in the window that comes up for what you want to find, type in AOL and it should appear. You can either drag it to the Dock for easy access or make an alias of that, and drag that alias to the Dock. Oh, and just so's you know, this forum is for Desktop macs only. We may be able to answer your question about a MacBook Pro. Same kind of animal, but different breeds.
good luck
John b -
One of my customers has a Windows Server 2008 R2 cluster for an Exchange 2010 Mailbox Database Availability Group. Lately, they've been having problems with one of their nodes (the one node that is on a different subnet in a different datacenter) where
their Exchange databases aren't replicating. While looking into this issue it seems that the problem is the Network Manager isn't started because the cluster service is failing. Since the issue seems to be with the cluster service, and not Exchange,
I'm asking here.
When the cluster service starts, it appears to start working, but within a few minutes the following is logged in the system event log.
FailoverClustering
1572
Critical
Cluster Virtual Adapter
Node 'nodename' failed to join the cluster because it could not send and receive failure detection network messages with other cluster nodes. ...
It seems that the problem is with the 169.254 address on the cluster virtual adapter. An entry in the cluster.log file says: Aborting connection because NetFT route to node nodename on virtual IP 169.254.1.44:~3343~ has failed to come up.
In my experience, you never have to mess with the cluster virtual adapter. I'm not sure what happened here, but I doubt it has been modified. I need the cluster to communicate with its other nodes on our routed 10. network. I've never experienced
this before and found little in my searches on the subject. Any idea how I can fix this?
Thanks,
Joe
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise AdministratorHi,
I suspected an issue with communication on UDP port 3343. Please confirm the set rules for port 3343 on all the nodes in firewall and enabled all connections for all the profiles
in firewall on all the nodes are opened, or confirm the connectivity of all the node.
Use ipconfig /flushdns to update all the node DNS register, then confirm the DNS in your DNS server entry is correct.
The similar issue article:
Exchange 2010 DAG - NetworkManager has not yet been initialized
https://blogs.technet.com/b/dblanch/archive/2012/03/05/exchange-2010-dag-networkmanager-has-not-yet-been-initialized.aspx?Redirected=true
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I tried to use the
SWFToImageObject Objswfobj = new SWFToImageObject(); for Capturing the Chart as Image using SWFToImage.dll
But whenever creating the object as above firsrt line of the code i am getting the below error.
Retrieving the COM class factory for component with CLSID {479A1AAC-C148-40BB-9868-A9773DA66AF9} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
if required any components or any solutions.
Thaks in advance.
Regards
RavikumarHi,
I am not able to find sharepoint word in your post so can you please confirm that your question is related to sharepoint?
> Class not registered
For you issue, this error usually comes if you don't have DLL in proper place so add SWFToImage.dll in GAC and then add this assembly reference in your project from GAC.
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Everytime I open iTunes to play music, NOT to access the iTunes Store, I get the password sign in box for the iTunes Store. If I click cansel the box pops up a second time.
When I try to sign in to the iTunes Store it does not except the password and pops up the sign in box afain,and again endlessly.
This started happening about two weeks ago.if itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device -
The heat vented from the back of the laptop caused the glue to fail and now the screen is separating from back of the lcd case near the hinges. I know for a fact that this issue is known by Apple as I have seen the issue reported at least a dozen times. This laptop was considerably more expensive than any comparable laptop at the time I bought it. I bought it believing that I was buying a quality product from a quality company. I've owned many laptops and I have never seen anything like this. My laptop is out of warranty but this is really besides the point. This is clearly a factory defect that Apple should remedy. What do I need to do to get Apple to fix this design flaw?
Ask Apple.
We're just regular users here, nobody from the company shows up except for the invisible moderator who purges your posts, threads or self. And if any employee is around, the lawyers probably prevent them from identifying themselves. -
How can I access the properties of Microsoft files (excel, ppt, and word)
Hi,
How can I access the properties of common Microsoft file formats (Excel, Word, and Powerpoint) from a Java program. You can access/modify the properties of each document type using File->Properties in each MS application. The properties are essentially name/value pairs.
Basically, I need to write a java program that scans a directory and accesses the properties in each of the MS files in the directory.
thanks,
-johnBy api. That is only way to establish a contract with the MS programs you want to interface with, unless you write an api yourself! I've used POI and it was an awesome way to use Excel in java. I created an excel spreadsheet from the results of a sql query from a batch program and then it was automatically emailed using javamail to my client. I had a lot of VBA experience with Excel, Word, and Outlook and it didn't take me long to get used to using Jakarta-POI.
Now I see there is Jakarta-POI-HWPF which works with MS Word documents. Go to: http://jakarta.apache.org/poi/ -
I have Windows 7 (64 bit) and iTunes 10.2.2.12. I can access the web through Mozilla and Internet Explorer. But, when I open iTunes I can not access either the iTunes Store or iTunes Help. I keep getting a message that says the web connection is not secure. I use a Intel wireless router that is secure. I have tested my Norton program, but it is not Norton that is blocking iTunes. What can I do?
In the course of your troubleshooting to date, have you checked through the following document?
iTunes: About the "A secure network connection could not be established" alert -
what is the problem when the screen goes dark and you cant' access the search items, also i find it strange that I can access you tube but can't access internet thru safari??
Couple of things you could try : clearing your Safari cache (Settings > Safari > Clear Cache and also try Clear History). You could also try a reset : press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I am unable to access the restrictions in the accessibility settings due to the fact It is password protected. I have just purchased it so it is brand new out of the box and I have not set a password for it and I wasn't issued one with the iPad air. Can someone advise please.
They don't come with restrictions enabled, you have to turn them on and set the passcode.
When you do try to enter the restrictions area you are prompted to enter a passcode, but that means you're making it.
I'd take it back to where you bought it from and have them unlock it. -
If I access the website of Cebu Pacific Air I get as reply upon entering a search request "HTTP Error 400. The size of the request headers is too long.", but if i use private browsing i do not get this reply. This refers to Firefox 5.0 on ubuntu 11.04
I have tried to resolve this through deleting history and the cookies, but i always get the same reply. Although if i use firefox (ubuntu) private browsing or Firefox on Windows 7 i do not get this error message.
What causes this error and how do i resolve this?Copied from the link mentioned below.
''That is usually a problem with corrupted cookies. Clear the cache and the cookies from sites that cause problems.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" ''
https://support.mozilla.com/en-US/questions/785186?s=http+error+400&as=s
Check and tell if its working.
Maybe you are looking for
-
Please help with a DropdownIndex Component.
Hello all, I have a DropdownIndex component on my table. The user can click on it and choose some an account number from a drop down list. But if there is no number, how can he add a new account number? The component set to readOnly - false. But I st
-
Importing photobook pages into a new photobook
I've got a lot of experience working with PSE project files but I can't figure out how to take a page from an existing PSE project file and copy it into another project file. I've tried dragging and dropping (doesn't work), and can't seem to find a m
-
My iphone was glitching and suddenly it turns off? what do i do?
hello. i recently turned on my iphone and it started to glitch out, being really slow and i turned it off to see if maybe it would cool down and when i when to go turn i back on the back light is on but no visual? and ive tried resetting it.. what do
-
KKBC_ORD (or similar one) to be used for a group of PP-orders
Hi, I want to create a production order variance report like this: Columns: variance categories Rows: the origin of each variance I can do this easily by defining a layout using T-Code KKBC_ORD which also allows me to select variances cumulated or pe
-
Badly needed please help.
i dont have browser configuration service book entries. how can i enable browser on my blackberry 8520?