OpenScript compatibility & unable to open instance after running test scrip

I have an open SR with Oracle (sr#3-6909979251).
We purchased OATS (Test Manager and Open Script) and we also pay for oracle support. After I run test scripts, I have issues opening the instance that test scripts run against. For example, I run them in our PreProduction environment, after I run all 100+ test scripts, I try to log into PreProduction as usual (without using open script or even having it open), and at the point where the form would typically open - I get an error message instead (which I have attached to the SR). This happens after I run scripts. Noone else has the problem, and I am the only one that has OpenScript loaded on my machine, and it always happens after running test scripts, so it must be related to OpenScript some how.
In the SR, they are implying that its because OpenScript is not compatible with EBS 11i. That can't be the issue...can it? And if it is, if I install the new OpenScript R12 to run against EBS 11.5.10.2?
I can't seem to find what versions OpenScript is compatible with on MOS>Compatibility.
Any thoughts on this or has anyone else had issues opening their EBS instance after running test scripts?

I was playing around with my profile settings and comparing them to other users. I had a value in ICS: Forms Launcher, but the other admin person did not. I removed that link, now the instance FINALLY (after over a month of issues) opens without a problem.

Similar Messages

Unable to open safari after OS X 10.10.1 (14B25) install

Hi I am unable to open safari after Yosemite Install. Keeps saying application unexpectedly quit. Please help. What can I do.
This is my log.
2014-12-21 12:28:53.436 AM storeaccountd[790]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7f981865a690> connection from pid 5257 with interface <AccountServiceInterface: 0x7f98186626d0> (PID 5257)
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
2014-12-21 12:28:53.524 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[5263]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
2014-12-21 12:28:53.534 AM diagnosticd[4898]: error evaluating process info - pid: 5257, punique: 5257
2014-12-21 12:28:54.112 AM CoreServicesUIAgent[4885]: unexpected message <OS_xpc_error: <error: 0x7fff74444c60> { count = 1, contents =
    "XPCErrorDescription" => <string: 0x7fff74444f70> { length = 18, contents = "Connection invalid" }
}>
2014-12-21 12:28:54.114 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.WebContent.E6AD49CE-0465-469F-87B1-03F344779200[5260]) Service exited with abnormal code: 1
2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.Networking.F81FC96F-CA5B-4BB9-9FD6-8E6C50383904[5259]) Service exited with abnormal code: 1
2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.Safari.53708[5257]) Service exited due to signal: Segmentation fault: 11
2014-12-21 12:28:54.188 AM ReportCrash[5263]: Saved crash report for Safari[5257] version 8.0.2 (10600.2.5) to /Users/rasulkassam/Library/Logs/DiagnosticReports/Safari_2014-12-21-002854_Rasu l-Kassams-MacBook-Pro-2.crash
2014-12-21 12:28:54.326 AM Problem Reporter[5264]: Failed to connect (_imageWell) outlet from (ProblemReportWindowController) to (NSImageView): missing setter or instance variable
2014-12-21 12:28:54.576 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0
2014-12-21 12:28:54.577 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0

Genieo adware is installed without your knowledge. You have to remove it.
From the report:
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
If you have another browser:
     Use free AdwareMedic by clicking “Download ” from here
     http://www.adwaremedic.com/index.php
     Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
     Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
If you don’t have another browser:
     Remove adware manually by following the “HowTo” from Apple.
    “Remove Genieo, also known as InstallMac”
    http://support.apple.com/en-us/HT203987
      Safari > Preferences > Extensions
    Turn those off and relaunch Safari again.
    Turn those on one by one and test.

Unable to open Pages after new hard drive

I am unable to open pages after recently having to get my hard drive replaced. I have a time machine that I could get the application/files off of, but when I try to open it it comes up with the message:
"Check with the developer to make sure Pages works with this version of Mac OS X. You may need to re install the application. Be sure to install updates for the application and MAC OS X"
I have done all the software updates possible for both MAC OS and iworks compatibility, and nothing has worked. I do not have the original CD with me, so I cannot reinstall. Is there any other way to get the working version of the application off of my time machine?

(1)
Enter mac App Store and check if it state that Pages is installed on your machine.
If it does, you may download Pages 4.0.5 thru this channel for free.
(2)
Assuming that you aren't far from your original DVD for a long time, you may remove every files related to iWork '09 with my uninstall script
then
download and install the trial version,
don't run it
Trigger Software Update to download and install the required updater.
I apologize but I don't remember if the updater 9.0.5 apply the entire required changes.
After that you will have an up to date package which you will be able to use during 30 days.
When you will be back home, re-apply my uninstaller
install the package from your DVD
don't run the apps
Trigger Software Update to download and install the required updater.
After that you will have an up to date full time package.
To get my uninstaller,
go to my iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 22:42:02
Please :
Search for questions similar to your own before submitting them to the community

Unable to open iphoto after ver 11 upgrade

Unable to open iphoto after ver 11 upgrade.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Unable to open indesign after migration to new mac all other programs open and work.

Unable to open indesign after migration to new mac all other programs open and work. Why? Running Yosemite 10.10.1 Indesign CS5

The keyword is "migration." Migrating or copying files for Adobe applications usually does not work. Not all of the necessary subsidiary files are copied to the right location.
You'll need to first clean up the mess with this tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer from here:
Other downloads

Unable to open itunes after update

unable to open itunes after update

I had a user with the same issue after updates and I was able to resolve.
I copied QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
I did so after uninstalling and re-installin, but I don't beleive that was necesssary. Thanks to user thurdy. This fix was from apple support for the error "iTunes stopped working". Figured I'd give a shot and it ended up working.
For reference the user was receiving the following errors exactly:
"the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
and
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error127)"

TS3103 I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

I'm unable to open mail after Securty Update 2012-004 (Snow Leopard)

Please see
https://discussions.apple.com/thread/4311280?tstart=0

Office Web App error - unable to open PDF after multiple trials

Hi, we are using Office Web App server 2013 on win server 2012 (NO Sharepoint installed) to preview files (doc, docx, pdf, xls, xlsx, ppt, pptx), OWA is set as http, wopihost
is http as well under different from HTTP80, HTTP809 application pool
File conversion if fine for small files and large files to some point - we can process same large pdf (100MB) 30-50 times, but after that there is a message
"Sorry, Word Web App ran into
a problem opening this document. To view this document please open it in Microsoft Word."
Server has plenty of free space, PerfMon
does not show spikes, no memory spikes in Process Manager. ULS logs do not provide any good info either...
No errors in event log under Applications,
System, or Microsoft Office Web Apps sections.
That error will be shown if we process
the same file. if try to process different file it works fine (again - few dozen times), but if after that I try to process first file - it shows error again.
Documents
are located on the same server as OWA installed, same machine has wopi site in non owa application pool (from Microsoft demo
- C#)
The only resolution i found is to reset
WAC server from PowerShell or restart IIS - after that it starts to process original file...
If I just recycle OWA application pools
- HTTP80, HTTP809 it does not help. (tried to change Recycling condition in IIS for those pools - it slightly improves situation but does not resolve).
I can reproduce such pattern with different file types, it just matter of number of hits.
Same error present if we use OWA and wopi on machine as https with certificate.
We use VerboseEx option for logging - no errors in ULS log files, but multiple Sync exiting
early records similar to
Sync exiting early: LastSyncTime = 09/16/2014 14:52:07
at Microsoft.Office.Web.Apps.Environment.WacServer.ACacheableFarmStateObject.Sync(Boolean force)
at Microsoft.Office.Web.Apps.Environment.WacServer.AFarmSettings.TryGetSettingValue[T](String settingName,
T& value, Boolean shouldProcessValue)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSConfigAdapter.TryGetValue[T](String settingName,
T& value)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.GetAgentUri(WebAgentProperties
agentProperties, String machineName, String fqdn)
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.UpdateServiceList()
at Microsoft.Office.Web.Apps.Environment.WacServer.WSServiceInstanceFinderAdapter.FindAllServiceInstances()
at Microsoft.Office.Web.Common.ServiceInstanceFinder.RefreshList(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback
callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state, Boolean preserveSyncCtx)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.TimerQueue.FireNextTimers()
---------------------------------There are some paired records
Cached service list has 39 service instances before the update
Cached service lists has 39 service instances after the update
So it goes as follows: OWA processing all formats fine, after trying same 100mb pdf file 50 times (it is possible to get same error with docx, just bigger number of trials) it does not process that pdf file, but processes others.
After IIS reset it works as usual again. After trying another 100mb pdf file 50-60 times OWA stops to process that another file... We are expecting large number of hits and resetting IIS every 30min is not a good solution...
Any help will be appreciated.
Thank you

Hi ,
Thank you for your post.
Whether the issue occurs with different file types or only the PDF.
Based on your description, when you reset WAC server from PowerShell or restart IIS, the issue is solved temporarily.
I recommend that you check the application account, re-enter the account, then reset the IIS.
whether the issue occurs with different file types or only the PDF.
In addition, please check if the link is useful:
http://stevemannspath.blogspot.jp/2013/04/sharepoint-2013-pdf-support-and.html
Best Regards,
Lisa Chen

TimeOutException - unable to create instance - after installing patch set.

Hi,
We have Oracle 9iAS 9.0.2 (Release 2) running on Windows 2000 Server.
We are running EJB's on the server, these include Entity and Session Beans.
Last week on 13-March 2003 (Thrusday) we installed a PatchSet downloaded from "metalink.oracle.com".
NAME: PatchSet 1 for Windows NT
After installation we faced the following problem :
1. Initial (first time) when an Entity Bean is called for a specific Primary Key, we are able to get the instance of the Bean.
2. However for subsequent request to the same Bean, it is unable to create or find an instance for the Bean, throwing the following error :
"TimeOutException" - "unable to create instance"
3. Though Step 1 and Step 2 are repeated on restarting OC4J_HOME.
We then uninstalled the Oracle 9iAS and reinstalled it without the PatchSet. On doing so, the above error did not occur.

Badrul,
Try setting max-instances=0 for your EJB in the orion-ejb-jar.xml.
regards
Debu

Unable to open Store after updating KB2919355

Hi
I updated the my Windows 8.1 Pro with KB2919355 (798MB)
on 25-Apr-2014 and after that I am unable to open Windows Store.
I tried to use the following methods
1.   (a) Register $Env:SystemRoot\WinStore\AppxManifest.XML
      (b) start "" "ms-windows-store:"
2. wsreset through Windows+R and also through Command Prompt (Admin)
3. Windows App Trouble-shooter
Each of the methods followed by restart.
Finally,
1. I am unable to open the Windows store
2.  Running the store hangs-up the system
Also tried the Microsoft's Live chat but could not get any solution.
Please suggest if there is any solution.

Hi,
Here is a related KB article below I suggest you refer to:
The Store app crashes after you upgrade to Windows 8.1
http://support.microsoft.com/kb/2892082/en-us
If this KB couldn't help you solve the issue, I suggest you troubleshoot this issue in Clean Boot mode.
More information for you:
Store not opening after upgrade from windows 8 pro to 8.1 pro.
http://social.technet.microsoft.com/Forums/windows/en-US/40091b49-4658-4432-ae5e-d01ce519eae4/store-not-opening-after-upgrade-from-windows-8-pro-to-81-pro?forum=w8itprogeneral
Windows 8 Store Won't Open
http://social.technet.microsoft.com/Forums/windows/en-US/68a680e7-3e3e-4af3-be97-147e5571812c/windows-8-store-wont-open?forum=w8itprogeneral
Best Regards,
Amy

Unable to open iPhoto after upgrade to 9.1.3 (bought on apple store)

Hello all
I am unable to open my iPhoto after upgrading it with version 9.1.3 , bought in the apple store.
The searching icon never stops.
I trieded to synchro with my iPad (where I have a backup of all my pfoto's) but the system tells me that all photo's are still on my Mac.
Can someone help me out, because I am rather a rookie in this kind of things
regards
Waldo

Try this: launch iPhoto with the Option key held down and try to create a new, test library. If you can then then your library is the culprit.
If that's the case make a temporary, duplicate copy of your library (Finder ➙ File ➙ Duplicate) and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

GR amount/line item still showing in Open Item after run F.13

Dear Exparts,
We run the F.13 after MIGO and MIRO. The GR/IR line item should clear after run the F.13. But the scenario is that in FBL3N in GRIR G/L Balance, MIRO Line item showing clear but the GRN line item is still showing in Open item. How can it possible and what to do for it. As per my knowledge Both line item should clear after run f.13.
And how can I get the credit amount in which respect the IR(MIRO) amount cleared.
Thanks,
Sourav

Hello Sourav,
In the Automatic clearing Program for the items to get cleared they
should meet the fixed criterian and the user defined criteria (OB74).
When we execute SAP124(F.13) with the flag "only documents which can
be cleared" it will display in detailed list only those documents that
can be cleared. If dont check this field it will generate a list even
of documents that cannot be cleared.
For example:
in the OB74: ASSIGNMENT,FUND & BUSINESS AREA as the criteria.
And the ASSIGNMENT is not matching and thus the system does not find
the item suitable or rather eligible for clearing.
The system groups items according to
fixed system criteria:
Company code
Account type
Account number
Reconciliation account number
Currency key
BSID-WAERS for customers
BSIK-WAERS for vendors
BSIS-PSWSL for G/L accounts
Special G/L indicator
The program also groups items according to a maximum of five user
criteria. Note that the trading partner number and the business area are
no longer fixed system criteria (in comparison to the former clearing
programs SAPF123 and SAPF123W). Therefore, if you want to group by
business area or trading partner number, you have to enter these as user
criteria.
Thus initially items are grouped according to fixed criteria one of
which is company code.
I would like you to review note 10757 FAQ: MR11, clear GR/IR clearing
account
Please also review the documentation of the program SAPF124
Please also review the help.sap.com documentation on GR/IR Account
Maintenance.
http://help.sap.com/saphelp_47x200/helpdata/en/30/1060387db94003e1000000
9b38f8cf/frameset.htm
hope this helps
regards
Ray
Edited by: Raymond Moynihan on Oct 19, 2011 5:14 PM

Unable to open instance.

Hi,
I'm trying to open instances (R12 & 11i both) from home, after connecting to VPN client. Instance are not opening on PC. Status bar shows "installing oaj2se.exe" and after some time, internet connection is broken. Any idea why this is happening
Thanx
Amit

Please ensure that :
(a) You have privileges to install software (Jinitiator / Sun Plug-In) on your system.
(b) Pop-Up blocker is turned off in the Internet Explorer
Rgds,
Rakesh.

Unable to open documents after scanning

I am unable to open my documents after scanning. I keep getting the message Adobe reader could not open because it is either not a supported file type or because the file is damaged, then it redirects me to a buya subcription Adobe reader XI. These documents are just regular standard 3 to 11 gray scale scans, nothing special. I just need my regulay Adobe reader to open A PDF file. Please help.

just to clarify, you're scanning a document and then you are saving that as a pdf file, correct?
in particular, you are not trying to add the scanned document to an already existing file (pdf or otherwise), correct?
if yes and yes and your reader and can that pdf ok, you have a scanner problem. try updating your scanner's drivers.

IPhoto unable to open even after reinstalling.

Hello, I am not able to open iPhoto after the latest OS update. Have tried 3 times reinstalling the iPhoto but still facing the same problem.
Please kindly advise how should i solve this problem.
Process:
iPhoto [23855]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
Build Info:
iPhotoProject-902017000000000~3
App Item ID:
408981381
App External ID: 233642646
Code Type:
X86-64 (Native)
Parent Process: launchd [184]
Responsible:
iPhoto [23855]
User ID:
501
Date/Time:
2014-01-04 03:00:51.099 +0800
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: BC88F6B3-510C-BB16-B07B-BAFD09197754
Sleep/Wake UUID: 1BF1BC91-D536-4ED5-B39C-6C3353620BAB
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Python.framework/Versions/2.6/Python
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x7fff67c50000 -
0x7fff67c83817 dyld (239.3) <D1DFCF3F-0B0C-332A-BCC0-87A851B570FF> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B04, 2 processors, Intel Core i5, 1.3 GHz, 8 GB, SMC 2.13f7
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (6.30.223.154.45)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SD0128F, 121.33 GB
USB Device: My Book 1140
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

You need to reinstall:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

OpenScript compatibility & unable to open instance after running test scrip

Similar Messages

Maybe you are looking for