OpenScripts not loadable in OLT, OFT doesn't record forms activity

I think something's borked here. I've got OLT 9.00.1355 running and it integrates fine with the tests created by OFT - I can see them in the test list, play them back, etc. Problem is, the OFT scripts don't seem to be recording anything in Java Forms (and there's a nasty crash bug with LOV entries in self-service apps).
So today I downloaded OpenScript (Version: 9.0.0.0 Service Release 1) from Oracle and sure enough, it works great and plays back my Forms activity for me. But the scripts don't show up in OFT or OLT and I am needing to do load testing against forms activity.
What gives?

Hi Mike
Let me try and clarify this, first OFT does not support forms and is being replaced by OpenScript, OFT is still supported, but development has stooped and it will be deprecated in the near future, if you need to use forms you need to use OpenScript. OpenScript has different modules for functional testing and for load testing, functional works on a UI level and load works at a protocol level making the load scripts very scalable scripts recorded using the functional testing module will not show under OLT as they can not be used for load testing if you need to load test forms you will need to record the scripts using the load testing module which can be selected using the create new script wizard.
Hope this helps
Alex

Similar Messages

  • TNS: Protocol adaptor not loadable

    Hi,
    I am facing TNS: Protocol adaptor not loadable error when i am trying to login from SQLPLUS.
    But from the command prompt when I open sqlplus I am able to login. Also I am able to TNSPING my service (PROD).
    I am using Oracle 11g, This was installed along with EBS 12.1.1 My OS is Windows Server 2003 SP1.
    All my environment variables are properly set.
    I am unable to think of possible reasons.
    Thank You,
    Niranjan.

    NiranjanN wrote:
    I am facing TNS: Protocol adaptor not loadable error when i am trying to login from SQLPLUS.
    But from the command prompt when I open sqlplus I am able to login. Please clarify. Do you have two Sqlplus? Which one works and which one doesn't? Note that 11.1 does not have sqlplusw.exe, only console (command prompt) version exists.
    I am using Oracle 11g, This was installed along with EBS 12.1.1 My OS is Windows Server 2003 SP1.
    All my environment variables are properly set.Are you sure? Seems like you are "mixing homes". Does this EBS have an Oracle Client inside perhaps?
    ProcessMonitor is a good tool, with which you could find out from where files actually are loaded.
    Edited by: orafad on Jul 24, 2009 9:38 AM

  • My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

    My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

    I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

    That is about normal. You can maximize battery life by changing some settings. See:
    Apple - Batteries - iPod
    Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
    iPod Touch Repair – iFixit                  

  • When i plug my ipod into my computer it is not recharging.  The computer doesn't even acknowledge that it is plugged in. Any ideas why? It does have power left so i can use it but i want to recharge it of course.  Any input is appreicated.

    When i plug my ipod into my computer it is not recharging.  The computer doesn't even acknowledge that it is plugged in. Any ideas why? It does have power left so i can use it but i want to recharge it of course.  Any input is appreicated.

    Plug it into the wall using the supplied charger.
    Barry

  • My power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like it usually does but it's not turning on

    my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on

    Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
    If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
    Good luck Friend.

  • Data target error when opening InfoPackage (not loadable)

    Hi,
    I have transported my objects from the development environment to QA environment, but now when I try to open one specific InfoPackage (in QA) to schedule a data load to an DSO, I receive the following error:
    Data target 'P_USUARIO ' removed from list of loadable targets; not loadable     RSM     33
    Data target 'P_USUARIO ' is not active or is incorrect; no loading allowed     RSM     36
    I tried to run RS_TRANSTRU_ACTIVATE_ALL program before realizing that it is not relevant in NW04s and I tried to transport many times again this specific data target with no success.
    Any suggestion??
    Thanks in advance.
    Raphael

    Hi:
    The program you ran is for Transfer Structure.
    The error you are gettign is for an Inactive Update Rule.
    If the infopackage is loading several data targets and an update rule is inactive, then, you have take off laoding to that Update Rule in Infopackage.
    First, see which Update Rule is Inactive. Look in all the tabs of infopackage and you will find it.
    Ram C.

  • Message when opening VI "LABVIEW: VI not loadable

    I am receiving a message when opening my VI:  "VI not loadable".
         The message box is attached in a Word document.
         The VI is also attached.
    This VI was working this morning.
       It uses DAQmx to acquire data from 3 load cells.
       The data was displayed using a dial and numeric indicator for each channel.
        Then I added a waveform chart to the front panel.
         The chart history was at 1024. The chart worked, but the history was too short.
         The VI was shut down.
    An hour later:
        I opened the VI and changed the chart history length from 1024 to 2100000000.
        The Vi was closed without testing the VI.
    The next time I tried to open the VI, I got the message the VI was not loadable.
       The message also said "Could not load the default data".
    Did I cause the problem by entering a huge number in the chart history length?
    If I can't open the VI, how can I begin to fix it?
      The VI is not an executable.
      The VI has been opened on only one computer.
    I am using Labview 8.0.
    Thanks,
    Bill
    Solved!
    Go to Solution.
    Attachments:
    VI not loadable.doc ‏26 KB
    NC Zulu Wire Movement.vi ‏131 KB

    Hi Kevin,
    You were right. It is an issue with not having enough memory.
    The problem was caused my me and my haste to close the VI and ignoring the messages.
    Here’s how I recreated the problem using a different VI.
         Open the attached VI
         Change the chart history length to 2100000000.
         Save the VI.
         Run arrow goes from solid to broken.  (I missed this the first time it hapened)
         The error list says “You must make more memory available for LabVIEW to generate the code for this VI.”
    Exit Labview
    At this point, a popup window says an error has occurred and Labview will be shut down.
    Thanks for your help. 
    Bill
    Attachments:
    Data Acquisition .vi ‏365 KB

  • Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new l

    Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new laptop.

    Make sure you are using the  correct serial number.  Find your serial number quickly
    If you did not deactivate the original installation then it is possible your two allowed activations have been used and you need to reset your activation count.  To do that you need to contact Adobe Support thru chat and ask them to reset your activations.  If you ask for more than that they will tell you they cannot offer you any support.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • My mac mail will not search mail anymore and doesn't load attachments anymore

    Does anyone know why this would be happening?
    My mac mail will not search mail anymore and doesn't load attachments most of the time.  When I enter some text in the search box no results come up and I know there are messages that contain the phrase that I've entered.
    Also about 3 weeks ago attachments only get loaded about 1/4 of the way - if that.  So I have to log onto my web based mail program from the host and retrieve attachements or check the messgae with my iphone.
    Please - does anyone know how to fix this?

    I figureed out that spotlight was turned off via terminal -  I shut it off to unmount a disk (which didn't work anyways)
    sudo mdutil -a -i on
    that's the termianl command to turn spotlight back on.  As far as my attachments not fully loading in mac mail on my iMac that still baffles me.

  • Removed from list of loadable targets not loadable

    Hi Gurus,
    I am working on BI NW 2004's.
    <b>Error Message</b>: 1)DataTarget "HRPA_C01"removed from list of loadable targets,not loadable.
    2)DataTarget "HRPA_C01" is Transactional and is on 'Planing mode'.
    I had a cube (0PA_C01) for this it has 2 Infosouce (0HR_PA_1,0HR_PA_0)
    when i load data through info pack it is showing that (HRPA_C01) is remove from the list loadable target.
    But HRPA_C01 is another cube for this UpdateRules are (0HR_PA_1,0HR_PA_0), HRPA_C01 cube is not appearing in datatarget list in Info package.where this target is missing?
    What is the solution for this Error.
    Thanks in advance.

    Hi Raju,
    Go into the context menu for your cube in the RSA1 view.
    Choose "Switch real-time infocube". Put the setting to "Real-Time InfoCube Can Be Loaded with Data; Planning Not Allowed".
    Are you sure you want to use a real-time infocube for
    HR personel data loading ?
    Please assign points for usefull answers!
    Regards,
    Olav

  • Data target '0BBP_PO' removed from list of loadable targets; not loadable

    We have implemented the Business Content for Logistics and when we run the InfoPackage (IP) we have this message : Data target '0BBP_PO' removed from list of loadable targets; not loadable. We have Support Package 19 of BI 7.04 . The Data Target 0BBP_PO is not among the Data Targets of the IP, of course and none in the BW but why the IP takes it into account.
    Many Thanks
    Best Regards
    Amadeus

    Hi,
    This should solve your problem
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=925304
    Also check this thread
    'ODS' removed from list of loadable targets
    Thanks and regards,
    Srinath.

  • Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable

    Hi Friends,
    I deleted some info providers and now I'm receiving messages when I try to start an info package´that had deleted info providers as data targets.
    RSM033:
    Data target 'ZGPPCAOD' removed from list of loadable targets; not loadable
    RSM036:
    Data taget 'ZGPPCAOD' is not active or incorrect; No loading allowed
    How to get rid of these messages?
    The problem is, that when I try to add those info packages to
    process cnains no default processes like deleting and generating indices are provided.
    Any ideas?
    Thanks in advance
    Joe

    Hi,
    this should solve your issue: https://websmp103.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=925304&_NLANG=EN
    regards
    Siggi

  • Data target 'XYZ' removed from list of loadable targets; not loadable

    Hi Guys,
    I am trying to run one of the infopakcage. When i open the IP i get this error (red) message "Data target 'XYZ' removed from list of loadable targets; not loadable".
    I tired deleting and re-creating the IP but still get the same message. I checked the data target "XYZ" but could not find in the system. It does not exists.
    This is not just a warning but an error which does not allow me to schedule the IP. I checked many forumns on this topic but did not get solution for this. I saw some of the OSS notes on other similar foroums but those not applicable.
    I would appreciate if anyone could provide me the right solution for this.
    Thanks,
    Manmit

    Manmit90
    The XYZ data target has not been part of initilization but this is connected to the datasource. since the data target has been deleted now, system is throwing you an error that "Data target 'XYZ' removed from list of loadable targets; not loadable."
    Old init is corrupted now. you will have to try a fresh one.
    Before running the re-init, run the delta's and make sure that no the RSA7 is emptied for this datasource.
    There will not be any problem with the re-init, it's just that you are trying to modify the data target selections.
    The re-init will load delta data to only those targets that you choose now.
    Regards,
    Sudheer.

Maybe you are looking for

  • RG1 Register

    Dear Gurus I am trying to update RG1 register through T-code J1I5 for movement type 921. Table J_1RG1 get updated for this transaction. But when i use T-code J2I5 for Excise Register Extraction entry does not reflect in table J_2RG1BAL hence opening

  • 41 seconds to open a directory...

    We are about to run a Pilot Project and are experiencing very long response times. We have loaded 111,175 Files under 12,372 Directories for a total of 6.55 GB. The directory structure is: /HOME/MDDM /A, /B, ...etc for the 25 letters of the alphabet

  • How to show a row has been "removed" from a table

    We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED

  • HT201656 how do I get rid of stored app data in iOS 8?

    Hi, does anyone know if there's any way to reset the app data in iOS 8? Some of my apps store ridiculous amounts of data (like rss reader with 900 mb of god knows what!) and I have no idea how to get rid of it. Reboot doesn't help. Thanks in advance.

  • [SOLVED] Strange line in /etc/hosts

    I was checking my /etc/hosts when I came across this line: 64.50.236.214 releases.mozilla.org Should that line be there? Is it safe? That ip points to a mirror site. Last edited by Skoll (2010-01-14 19:54:14)