Openshot and kdenlive render without sound

Hi
It has been a long time [a few months] since I have not used Kdenlive.
When I rendered a movie with a mp3 sound track [ songs especially ] I got the film with this sound track.
Now are occuring 2 things:
The final movie is without sound [during the edit, there is no problem, I can hear the track, move it where I want, putting effects on it without any problem],
the time counter is wrong, it does not show the video time correctly, I mean the time counter will be stuck at 0 second, then will jump to 6 seconds and son on for example.
These things happened in OpenShot too, actually I tried OpenShot editing my new clip and I found these issues. I thought it was specific to OpenShot and I remade my clip with Kdenlive.
Any clue?
Thx in advance
Serge

Start reading here and follow all included links and answer all 16 questions at the end of the Wiki article: Some suggestions

Similar Messages

Have downloaded this week's episode of Covert Affairs and it plays without sound. Any way to fix this? Any way to redownload this episode?

I have downloaded the latest episode of Covert Affairs and it plays without sound.
This is correct for a playbeack on a Mac Mini, on a MacBook and on ATV.
Thinking of redownloading this episode but would that help?

How to report an issue with Your iTunes Store purchase

HT1657 I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

Hi, thank you for your consern,
I have Window Vista...Im not to computer friendly when it comes to deep details about the systems so I dont really know if its 32 or 64 bit but I did see that it is 919 bytes.
I WAS able to see the videos before the upgrade and the flash animation does NOT rotate in red F.

All Premiere exports render without sound. Help!

I've been banging my head against the wall about this.Audio (from the video and from mp3) works fine when played in the timeline. When I export... regardless of what codec and settings... there's video, but no audio.
I'm new to this forum, so if anyone can help I would definatly appreciate it. I'll send you whatever info is needed to solve the problem. Thank-you!
Jonathan

Start reading here and follow all included links and answer all 16 questions at the end of the Wiki article: Some suggestions

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Select an area of sound track and delete it without using the razor?

Is there a way to select an area of sound track and delete it without using the razor please?
Like drag and then cmd-delete or clear or something would seem intuitive?
Thanks Steve z denver

Set In and Out Points to define the region, then use the Lift command (Sequence>Lift). Note that the Lift command functions based on track targetting, so if the Video track is also targetted, the content will be removed there, too.

My macbook pro It has remained without sound and the connector has a red light

my macbook pro It has remained without sound and the connector has a red light. The analogic sound doesn't work. Thanks for your attention...

    Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
Best.

After Effects composition is imported into AP without sound

Hi, everyone
I've got a really frustrating problem with AE and AP CS4. Today AE has decided it will no longer render my composition that I spent days building. It's really nothing fancy, but it has lots of .MTS files, as well as some .mp3 ones, and I have just come across a post today saying that I should have converted the .mts before bringing them into AE. The thing is, although it sometimes complained when I was doing some test renders, it would nonetheless give me some stuff. Well, not today - it crashes from the first frames of the comp.
After pulling my hair out, I was hoping I could import the comp into AP and render from there. Up to a point, this works, because it does render and there are no more errors about "after effects error: error (4) reading frame from file (86 :: 2)".
However, my comp does not have any sound... is that meant to be or can Premiere be persuaded to import the sound, too?
Thank you so much for your help in advance because I am literally pulling my hair out...

Thanks for this, Todd. I will give the updates a go (EDIT: it turns out I had all the updates...). I will also convert the .mts and keep my fingers crossed that replacing the .mts with the new files is as easy as you suggest.
Still wondering a bit why Premiere would import an AE comp without sound, though... That is seriously odd in my books...
Thanks for the suggestions anyway - at least now I have something to try.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

New Problem - video loads, plays a bit, pauses, then plays without sound.

On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?

This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

My videos play on my ipod but without sound! HELP!

i have converted them on itunes and they play with sound on itnues. i synced them on to my ipod fine and they play but without any audio!
Please help

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(28559)

Airplay plays – without sound

I am not sure if it is a iTunes, AppleTv, Airplay or Time Capsule issue – or a combination of them all.
But i am experiencing alittle annoying issue, which i hope to fix.
I am playing music from iTunes 11.0.5 and i Airplay it to my AppleTv it plays with sounds and all as it sould. But often we it continues to the next track, I can see it plays because the playcounter is running and it Scrobbles to Last.fm – but there is no sound. I then have to pause and press play, or skip back to beginning of the track. Otherwise it can continue to play the rest of the album, just without sound.
I think it might have something to do with all the media files are stored on my Time Capsule, but the iTunes folder containing the .itdb and .itl are still on my local HD. It is as if it doesn't load the files properly. But i don't have any issues with movies files.
Is it a iTunes Time Capsule issue? And if so, any fixes? I tried updating to latest firmware, but it didn't resolve the issue.
Or could the problem be soemthing else?
I do have a pretty fast internet connection both in upload and download.
MacBook Pro 10.8.4
iTunes 11.0.5
AppleTv 2.gen (lastest OS)
Time Capsule 4. gen. (7.6.4)

Try using this application to convert the videos, or the instructions in this article.
(15110)

Turning on Render at Maximum Bit Depth and Maximum Render Quality crashes render every time

I've tried a few times to render an H264 version of my Red media project with Maximum Bit Depth and Maximum Render Quality. Premiere crashes every time. I have GPUs enabled. Are people using these settings with Red media and successfully rendering?

To answer your specific question did you see the tooltip?
I beleive it allows for 32-bit processing (16-bit if unchecked). Per the project settings help file at http://helpx.adobe.com/premiere-elements/using/project-settings-presets.html
Maximum Bit Depth
Allows Premiere Elements to use up to 32‑bit processing, even if the project uses a lower bit depth. Selecting this option increases precision but decreases performance.
The help file for export is somewhat less informative about what it actually does but does point out that it is the color bit depth - http://helpx.adobe.com/media-encoder/using/encode-export-video-audio.html
(Optional) Select Use Maximum Render Quality or Render At Maximum Bit Depth. Note: Rendering at a higher color bit depth requires more RAM and slows rendering substantially.
In practice the simplest suggestion is to export twice - once with / once without the setting and compare the time taken and perceived quality.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Openshot and kdenlive render without sound

Similar Messages

Maybe you are looking for