Opentext ECM Livelink - Archive Server 9.7 - Is AIX a valid platform
Hi All,
Can anyone tell us, whether Opentext ECM Livelink - Archive Server 9.7 is supported on AIX - Oracle platform or not? If yes, then which version and patch level etc for OS and DB?
We do not have access to Opentext Knowledge base and so we could not get the information from there. However, from SAP service marketplace we found the Release Notes for Archive Server 9.6 and that seems to support AIX. But we found the Release Notes for Archive server 9.7 from a friend and there, AIX is not mentioned specifically as a supported OS. We are confused as whether for Opentext ECM Livelink - Archive Server 9.7, AIX is supported or not. Any help/resources will be greatly appreciated. Also any note on hardware sizing would be very much helpful.
Regards,
Priya
Hi All,
Thanks for your responses. We got in touch with ECM initially and the Customer Service Executive informed us that if only we have procured the product they would share the requested information. However, I was lucky 2nd time, I wrote to them and they did respond with all the useful information. Currently Archive Server 9.7 is not OFFICIALLY supported by AIX (ECM has not tested), though they mentioned that all Unix platforms support Archive Server 9.7.
Thanks,
Priya
Similar Messages
-
Dump in SAP after installing patch for Doculink of Opentext ECM
Hi,
We have installed Add-on of Doculink for Opentext ECM on ECC6.0 System. We have installed (new version 9.6.2) it from Open-Text (3rd party vendor).
01) Open Text DocuLink for Livelink Enterprises
02) DocuLink for Livelink Enterprise Server
03) Open Text Archiving and Document Access
04) Open Text Archiving and Document Access for SAP Basis
After transporting the patch DC3.1-001(instruction of patch) which we found from open text site of https://esc.ixos.com/ we are getting dumps in SAP that: Program is not Unicode-compatible.
Error analysis
The following syntax error was found in the program /IXOS/SAPLDC_C:
The program /IXOS/SAPLDC_C is not Unicode-compatible, according to its program attributes.
Can any one tell me how can this transport be reverted back from Open-Text 9.6.2 ?
Thanks & Regards,
Nikhilesh Rayis not Unicode-compatible
Have you tried to disable the unicode check?, It might work.... In anycase I think you should give IXOS a call, I presume they have seen this issue quite a few times :-D
Regards
Juan -
How to Call Livelink Archive Java Viewer(IXOS-JavaViewer Applet )
Hi,
I want you to teach,How to call Livelink Archive Java Viewer(IXOS-JavaViewer Applet)
I want to call it in the following images.
When the button is pushed, I want to call Livelink Archive Java Viewer.
The method was not able to be taught though it inquired of the help desk of
IXOS.
Please teach me!
ReagardHi Tomohiro,
Is this issue being resolved? which version of ixos server and viewer are you using?
regards,
Jess -
How to save PDF billing in Livelink Archive which is connect with SAP R3
After i display the billing which is used LiveLink Archive to present it. i want to use VBA to save the current open file in Livelink Archive but have no any idea about what the codes it is. i only know how to open a file in LiveLink as below:
Sub OpenDocInViewer()
Dim Viewer
sFileName = "C:\Documents and Settings\jjy018\Desktop\data-[archived__P1].pdf"
Do
Set Viewer = CreateObject("AlViewer.App")
Set Doc = Viewer.CreateDocument()
Viewer.OpenDocumentFromFiles sFileName, sFileName, sDocType, sFileName, ""
Set Viewer = Nothing
Loop
End Sub
But what is the code for save the opened file in Livelink?
need your help!Hi Srinath,
Refer the following links:
pdf file in application server
PDF file download to application server.
Download PDF File to SAP Application Server
This web log covers all possibilities:
/people/sap.user72/blog/2004/11/10/bsphowto-generate-pdf-output-from-a-bsp
<b>Reward points if this helps.
Manish</b> -
Delete data from archive server
Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
StefanHi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra -
How to send a pdf file to Archiving server
hi
i got a requirement that a smart form is generated in pdf format after that we ll send it to Archiving Server . Plz help me out
Thanks & Regards
KrishnaOr use the free Workspaces service at https://workspaces.acrobat.com/
Upload the file, publish or share it, then send the download link via email. -
Diff. between content server and archive server(SARA on content server)
I am very interested about difference between content server and archive server. Is there content server supplied by SAP and archive server by third party producers or something else?
If so dditionally what needs to be done to archive data (via Sara) on content server. I did it on sap R/3 4.0 on an archive server. Is it huge difference to do it on 4.7x2 on content server?Hey,
The content server is used to save documents,
and SARA (and other third party producers) are used to archive old data.
For example:
You should use Content server - When you need to save un-structured data about worker (e.g: pictures, documents and etc) .
You should use SARA (and other third parties) - When you need to move to archive old
worker which have left your organization before 5 or more years (there for they are not relevant for you)
Here is some more information about Content server
from help.sap.com:
"Therefore, besides the SAP database, an external content server is always available in every SAP system installation. In this way, the necessary technical infrastructure is provided for all document-centric applications and business scenarios that do not require a long-term archiving solution"
Here is some more information about SARA and archiving
from help.sap.com:
"Data Archiving removes from the database application data from closed business transactions that are no longer relevant for the operational business. The archived data is stored in archive files that can be accessed by the system in read-only mode."
for more information:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/e9ddbb5d9a524bbb7854d31b963248/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/73/c335406ee32e34e10000000a155106/frameset.htm -
Appraoch for archiving table data from a oracledb and load in archiv server
Hi,
I've a requirement where I need to archive and purge old data in datawarehouse.
The archival strategy will select data from a list of tables and load into files.
I also need to use sql loader control files to load data from the above files into archival server.
I want to know which is the better approach to load data into files.
Should I use utl_file or spool table data into file using select stmts.
I also have some clob columns in some tables.I've doing something like this a couple of months ago. After some performance tests: the fastest way is to create files through UTL_FILE used in procedure with BULK SQL. Another good idea is to create files with Python which operates on text files blazingly. (Use PL/SQL if you need to create that files on server, but if you have to create files on remote machine use something else (Python?))
-
Connection to remote archive server fails!
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hello.
Sometimes, I receive this message from archiver.mars...
CS-MARS appliance cannot connect to the remote archive server that is set up for archiving the configuration and event data.
Please verify that the connection of the archive server at IP: 'X.X.X.X' to the CS-MARS appliance is OK and CS-MARS appliance has the write permission to the exported path: '/' on the archive server!
CS-MARS is running software version 6.0.6 and data archiving via SFTP.
From GUI, data archiving status is running, archiving service enabled and remote server available.
SFTP server log shows, at the same time, this entry
02/16/2010 04:00:44 PM: [FAIL] Unknown global request [email protected] received
02/16/2010 04:00:44 PM: [NOTE] Connection from X.X.X.X disconnected
All suggestions are appreciated.
Regards.
AndreaIf you are getting connection refused, either the server isn't listening on the port you have specified or there is a firewall intervening.
Can you connect to the database using any other MSSQL client tools (query analyzer for instance?) If so, make sure the setting you have there are the same in sqldeveloper. -
How to get all files from Archive server
Hi Experts,
My problem is:
When i try to read from an archived file, the moment archive_open_for_read function module is executed, a popup box appears
asking to choose the name of the archive file to be read.
I have to pass only one Export Parameter i.e. Archive Object.
How to avoid the popup screen from appearing. I want to read all the archived files by default, the values are to be retrived from the archived files and displayed.
Thanks,
Parthow.Hi,
I probably didn't understand your question, as I think my answer is exactly what you expect.
In an archive object, you may have 1 or more files. If you want to know the list of files in the object, you have to use ARCHIVOBJECT_GET_TABLE.
Sandra -
Mac mini as archive server: do any big disks work??
I'm proposing purchase of a mini (I have one on another project, works flawlessly) and lots (4-8 TB at least) of disk. I've heard of problems with the mini talking to RAID storage. I've also been through reviews on amazon and newegg and gather many brands of big disks (1-2 TB) are having problems - with macs on firewire, if not all PCs - with going to sleep and having to be removed/reconnected before they are visible again.
So I'm wondering if any in the mac mini community have had success with 2 TB or larger drives talking to their mac without difficulty over FW800. I'm leaning toward purchasing separate enclosures and putting better internal drives in there (e.g. OWC enclosures, Hitachi deskstar drives).
Any comments would be much appreciated.So how were you thinking of providing a username/password system on the Mac mini or are you just planning to use un-authenticated (guest) access? Without a clear security system in place interally you will not be able to protect your data from the outside world.
In actual fact I'm intending to re-task my Mac mini into a server as well although I'm waiting for Mac OS X Server to be brought to Intel before taking my current server, an old PowerBook G4 500MHz, offline and replace it with the mini.
My preferred security method is to send all inbound traffic from our DSL connection to our server (placing it into the DMZ), close all ports on the server except the absolute minimum (server admin etc) and provide VPN access. Once a VPN connection is established you can do what you like with the network with your username and password. All other traffic is simply denied as you require the VPN conection.
You may just want to buy youself a hardware VPN server to handle the security until Mac OS X Server. -
File Server Migration Source and Target Data Validation
Does anyone know of a power shell script/CLI command or some other way to verify source and target data after a file server migration? I want to make sure that the shares that are migrated from the source and target are an exact match. Thank
you.Hi,
An example is provided in this article:
http://blogs.technet.com/b/heyscriptingguy/archive/2011/10/08/easily-compare-two-folders-by-using-powershell.aspx
$fso = Get-ChildItem -Recurse -path C:\fso
$fsoBU = Get-ChildItem -Recurse -path C:\fso_BackUp
Compare-Object -ReferenceObject $fso -DifferenceObject $fsoBU
And actually Robocopy could also do this job with /L and /log:file parameter.
If you have any feedback on our support, please send to [email protected] -
I have tried installing SQL Server 2008 multiple times on my machine, and I always receive this error about 3/4 of the way through: '' is not a valid login or you do not have permission.
I have tried installing both SQL Server Express 2008 with Tools and SQL Server Express 2008 with Advanced Services, and they both fail the same way. I am trying to do a new stand-alone installation.
I'm running Windows XP Home Edition SP3.
Looking into the error, some forums say I have to install it from THE Administrator account, and not an account with administrator permissions; it also cannot be in Safe Mode, because then the Windows Installer won't work. Unfortunately, I haven't been able to login to the Administrator account. I can go to the home login screen, do ctrl+alt+del twice, and attempt to login to the Administrator account, but I receive this error: Unable to Log You on because of an Account Restriction.
Other forums say that in the Server Configuration section, all you have to do is provide the username and a strong password from an administrative account on the computer, and it doesn't have to be THE Administrator. Well, I did that, but for some reason it doesn't recognize my username and password, it says something like "The credentials you provided for the SQL Server Agent are invalid". BUT THOSE ARE THE CORRECT CREDENTIALS FOR MY ADMINISTRATIVE USER! So I'm forced to use one of the accounts without a password, like NT AUTHORITY\SYSTEM. That's the only way I can get past this step.
Also, just FYI, on the next step, which is Database Engine Configuration, I am using Mixed Mode for the Security Mode. I AGAIN provide a password, and then add my current user (who IS an administrator on my machine!) to the SQL Server Administrators box.
But yet, it fails every single time.
This is pathetic and ridiculous. I must have tried to install this thing 15 times, that is not an exaggeration. I'm posting this on several other forums as well, maybe an MVP or Bill Gates himself can help me.
I have one of the log files from a failed installation. If someone would like to see it, I will post it.Papy Normand wrote:
Hello,
Please, could you have a look on the excellent answer of Mike Wachal you will find here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=4160294&SiteID=1
Don't hesitate to post again for more help or explanations
Have a nice day
PS : if you are talking about the Sql Server Agent Service, it is disabled for Sql Server Express. It is enabled only for the Workgroup/Standard/Dev and Entreprise Editions
Sorry, but I've tried the suggestion in that link, and it hasn't helped me.
For anyone wonder, the link is talking about the problem in Server Configuration where I enter my Windows user account and password (which is in the Administrative group), but it says the credentials are invalid. The link suggests that you need to either enter your Windows account (which I did, and it wouldn't let me go to the next step), or to use one of the built in accounts (which I also tried, but it gave me the " '' is not a valid login" error during the installation).
Any other ideas?
I haven't had any answers from any other forums either, so I'll just post my log file in case anyone wants to look at this:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2008-11-17 11:13:47
End time: 2008-11-17 12:17:25
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name: STEVEN
Machine processor count: 2
OS version: Windows XP
OS service pack: Service Pack 3
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: STEVEN\Steven
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: D:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: STEVEN\Steven
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\SystemConfigurationCheck_Report.htm -
500 Internal Server Error on IBM AIX for Oracle Application Server 10g
Hi all,
I have installed Oracle AS 10g on IBM AIX 5.3.After installation everything was working fine.After some time when i was trying to access the emd console for deploying the application it gives me following error:w/o asking for user name(ias_admin) and password.
500 Internal Server Error
java.lang.NoClassDefFoundError: oracle/sysman/eml/app/Console at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.loadServlet(HttpApplication.java:2283) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.findServlet(HttpApplication.java:4795) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:568)
Please help me out...
Thanks in advanceHi,
I am facing the same problem as well. Below is part
of error captured from em-application.log:
08/07/22 17:02:59 Started
08/07/22 17:03:00 default: jsp: init
08/07/22 17:03:00 default: Started
08/07/22 17:03:04 emd: jsp: init
08/07/22 17:03:04 emd: dynamicImage: init
08/07/22 17:03:11 emd: Error initializing servlet
java.lang.InternalError: Can't connect to X11 window
server using '172.28.8.106:0.0' as the value of the
DISPLAY variable.
at
sun.awt.X11GraphicsEnvironment.initDisplay(Native
Method)
at
sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnv
ironment.java:175)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java:180)
at
java.awt.GraphicsEnvironment.getLocalGraphicsEnvironme
nt(GraphicsEnvironment.java:91)
at
java.awt.Font.initializeFont(Font.java:333)
at java.awt.Font.<init>(Font.java:368)
at
oracle.sysman.eml.app.Console.<clinit>(Console.java:57
9)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java(Compiled
Code))
at
com.evermind.server.http.HttpApplication.loadServlet(H
ttpApplication.java:2283)
at
com.evermind.server.http.HttpApplication.findServlet(H
ttpApplication.java:4795)
at
com.evermind.server.http.HttpApplication.initPreloadSe
rvlets(HttpApplication.java:4889)
at
com.evermind.server.http.HttpApplication.initDynamic(H
ttpApplication.java:1015)
at
com.evermind.server.http.HttpApplication.<init>(HttpAp
plication.java:549)
at
com.evermind.server.Application.getHttpApplication(App
lication.java:890)
at
com.evermind.server.http.HttpServer.getHttpApplication
(HttpServer.java:707)
at
com.evermind.server.http.HttpSite.initApplications(Htt
pSite.java:625)
at
com.evermind.server.http.HttpSite.setConfig(HttpSite.j
ava:278)
at
com.evermind.server.http.HttpServer.setSites(HttpServe
r.java:278)
at
com.evermind.server.http.HttpServer.setConfig(HttpServ
er.java:179)
at
com.evermind.server.ApplicationServer.initializeHttp(A
pplicationServer.java:2394)
at
com.evermind.server.ApplicationServer.setConfig(Applic
ationServer.java:1551)
at
com.evermind.server.ApplicationServerLauncher.run(Appl
icationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:568)
17:03:11 emd: Error preloading servlet
avax.servlet.ServletException: Error initializing
servlet
at
com.evermind.server.http.HttpApplication.findServlet(H
ttpApplication.java:4846)
at
com.evermind.server.http.HttpApplication.initPreloadSe
rvlets(HttpApplication.java:4889)
at
com.evermind.server.http.HttpApplication.initDynamic(H
ttpApplication.java:1015)
at
com.evermind.server.http.HttpApplication.<init>(HttpAp
plication.java:549)
at
com.evermind.server.Application.getHttpApplication(App
lication.java:890)
at
com.evermind.server.http.HttpServer.getHttpApplication
(HttpServer.java:707)
at
com.evermind.server.http.HttpSite.initApplications(Htt
pSite.java:625)
at
com.evermind.server.http.HttpSite.setConfig(HttpSite.j
ava:278)
at
com.evermind.server.http.HttpServer.setSites(HttpServe
r.java:278)
at
com.evermind.server.http.HttpServer.setConfig(HttpServ
er.java:179)
at
com.evermind.server.ApplicationServer.initializeHttp(A
pplicationServer.java:2394)
at
com.evermind.server.ApplicationServer.setConfig(Applic
ationServer.java:1551)
at
com.evermind.server.ApplicationServerLauncher.run(Appl
icationServerLauncher.java:92)
at java.lang.Thread.run(Thread.java:568)
17:03:11 emd: redirect: init
8/07/22 17:03:11 emd: Started
08/07/22 17:03:11 cabo: jsp: init
08/07/22 17:03:11 cabo: Started
08/07/22 17:05:28 emd: Error initializing servlet
java.lang.NoClassDefFoundError:
oracle/sysman/eml/app/Console
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java(Compiled
Code))
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.loadServlet
Http
Application.java:2283)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.findServlet
Http
Application.java:4795)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpApplication.getRequestD
spat
cher(HttpApplication.java:2821)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.processR
ques
t(HttpRequestHandler.java:680)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.run(Http
eque
stHandler.java:285)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].server.http.HttpRequestHandler.run(Http
eque
stHandler.java:126)
at com.evermind[Oracle Application Server
Containers for J2EE 10g
(10.1.2.0.2)].util.ReleasableResourcePooledExecutor$M
Work
er.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:568)
17:05:28 emd: Servlet error
/b]
Could someone please help me take a look on this?
Thank you.
Regards,
HT
Hi,
I have got the solution........
go through the url:
http://docs.tpu.ru/docs/oracle/en/oas/10.1.2.0.2/aix.1012/relnotes.1012/relnotes/install.htm
Read these points:
Class Not Found Execption: 2.1.25
After doing all these four steps,restart your application server control.
Cause of this problem:
X Virtual Frame Buffer: 2.4.14
Cheers, -
Requesting links for Weblogic Server 8.1 (sp5) binaries for all platforms.
This might seem like a brazen request, but could someone provide me a link for Weblogic 8.1 (sp5) binaries. . .It seems unreasonable to spend $2,000 just to download a product version no longer supported by Oracle. The fact of the matter is that my client and my client's third-party staging server deploys their application in Weblogic 8.1 (sp5); believe me, if I had the authority and range of control to update my client's staging server and production server I would.
Regards,
Chuck
Edited by: user11226438 on Jun 3, 2009 7:33 AM
Ok, I found a majority of Weblogic's 8.1 (sp6) links. . .do you think developing on sp6 and deploying to sp5 will cause some issues? I'm supposing it won't and while the client has yet to deliver the application, the app server, documentation, or any other required materials, I'd at least like to get an environment that is compliant with their staging server's environment before-hand.
Edited by: user11226438 on Jun 3, 2009 9:38 AM
If anyone thinks that I will need to acquire a license for running (a sanboxed) version of Weblogic please let me know so I can inform my employer accordingly.If MQ V5 clients cannot interoperate with MQ V7 servers, then perhaps MQ V6 clients support the 1.4 JVM? If so, I suppose you can use an MQ V6 client to communicate with V7.
Alternatively, perhaps MQ's "extended transactional client" provides more flexibility in interoperability than the client you're using.
Tom
Maybe you are looking for
-
How do I get my Blackberry to Sync with Outlook and other apps on Mavericks?
With the removal of iSync, how do I get my Blackberry to sync with Microsoft Outlook 2011, and the other applications on Mac?
-
[SOLVED] Dropbox - can't run as normal user, but as root
I have problems with running dropbox as normal user. I installed dropbox from AUR. It is successfully installed. But when I type in terminal dropboxd I get: WARNING: Cannot write to "/home/USERNAME/.dropbox/dropbox.pid" I can run dropboxd as root fro
-
Is there any extra payment for paid apps?
I baught 3 apps wich total was 5.97 dollars. Now my bank have deducted 7..96 dollars. why is that?
-
How can I get MacBook Pro trackpad to recognize 4 finger tap as app switcher?
On my Bluetooth trackpad I have it configured so that a 4 finger tap is the app switcher. I want to configure the trackpad on my new macBook Pro to do the same, so that when I am away from my desk and using only the laptop I can have a 4 finger tap b
-
Rsync errors when using launchd
Hi, I have a script to do a backup via rsync. The script runs just fine when I execute it from the terminal, however it fails when run by launchd. Here is what gets spit out in the error log: Oct 26 08:03:15 Quatro BackupSync[13118]: sending incremen