Opera 6 and signed applets - Anyone got it to work ?

Hi,
im facing the problem that with the new Opera 6, the java plugin is no longer used. Instead Opera uses the default JRE installed on the machine. However, when i load a signed jar in Opera 6 there is NO certificate dialog like "do you want to trust this applet"...it just starts the applet. For this reason, do i have to manually ask for every permission ?
Try this http://java.sun.com/security/signExample12/signedPluginEx.html demo, it will just throw an security exception, in any other browser (even Opera 5.12) a certificate dialog will appear first.
BTW: Anyone got the same problem with the <object> tag in opera 6, it always says Applet not found when you leave the parameter codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0". If you remove it, the applet can be loaded.

Hi
Got the same problem. I've just noticed it, so I can't offer any help yet. I am using a certificate that I created myself, using keytool and I placed the policy file in the applet directory. I use the archive tag to access the jar file.
It works fine on IE6 and NN6. On opera - same problem yo got.
Now I know that opera doesn't support the archive tag, but the embed tag. So I wonder if you have tried it with embed?
Another Question: Is there anybody who has successfully installed the 1.4.1 Plugin with Netscape on a Red Hat Linux machine?

Similar Messages

Certificates and Mail - has anyone got them to work recently?

Hi,
I've been using Thawte digital certificates with Mail for almost three years and had no problems. Recently one of my certificates was due to expire, so I revoked it and got another one issued. The certificate is installed in my Keychain and everything looks to be correct - Keychain places a small green tick next to it and says 'This certificate is valid' and it is also ticked in the Address Book.
However, the option to sign and encrypt messages in Mail's compose window has vanished. I can't find a way of getting it to appear so it looks like Mail can't find the certificate.
I've quit Mail and reimported the certificate, no change. I've tried a self-certified certificate to see if that works - nothing.
A look on the forums suggests that a number of other people have had similar problems.
So has anyone found a workaround? This is quite important as I rely on signed email messages when working on large documents.
Thanks,
Mike.
iMac G5 1.5Gb RAM 250 Gb HD Mac OS X (10.4.6)

This is from Mail Help, that perhaps you have not seen:
"Signing and encrypting email messages
If you have a personal certificate on your computer, you can send signed messages (including the body of the message and any attachments) to anyone using Mail. Signed messages let your recipients verify your identity as the sender, and provide assurance that the message has not been tampered with in transit. A Signed icon (a checkmark) in the email header indicates your personal certificate is installed in Keychain Access.
Encrypted messages (which encrypt both the body of the message and any attachments) offer a higher level of security than just signed messages. You can only send encrypted messages when you have certificates stored on your computer for both you and all recipients of your message. The easiest way to get someone's certificate is to have them send you a signed email message. When you view a signed message, Mail automatically imports the person's certificate (or "public key") and stores it in your keychain. You'll know you have the recipient's personal certificate installed in Keychain Access if an Encrypt (closed lock) icon appears next to the Signed icon after you address a new mail message to that person.
To SIGN and ENCRYPT an email message:
Choose File > New Message. In the Account pop-up menu, choose the account for which you have a personal certificate installed in your keychain. A Signed (checkmark) icon on the upper-right side above the message text indicates the message will be signed when you send it. To send the message unsigned, click the Signed icon to deselect it. An unsigned ("x") icon replaces the checkmark.
Address the email. An Encrypt (closed lock) icon appears next to the Signed icon if you have a personal certificate for the recipient in your keychain and indicates the message will be encrypted when you send it. To send the message unencrypted, click the Encrypt icon to deselect it. An open lock icon replaces the closed lock icon.
For security, encrypted messages are saved in your Sent mailbox in an encrypted format.
If you don't have a certificate for all the recipients, a dialog appears that allows you to either cancel the delivery of the message or send the message unencrypted.
If your recipients are using Mail, security headers marked Signed and Encrypted are visible in the messages they receive. If they are using an application that doesn't use signed and encrypted messages, the certificate might be in the form of an attachment. If your recipients save the attachment as a file, they can add your certificate to their keychain.
Since many mailing lists reject signed messages (because the signature is an attachment), deselect the Signed icon before sending a message to a mailing list.
See also
encryption
security
digital signature
Open this for me
Apple Service & Support article: How to Use a Secure Email Signing Certificate (Digital ID)"
Hope this answers your problem.
iMac 1.9 GHz PowerPC G5 1.5 GB DDR2 SDRAM Mac OS X (10.4.6) Slot Loading 8X Dual Layer SuperDrive, iSight & Apple Remote; iPod Video

WRT54G V8 and VPN Has ANYONE got this to work

Standard Windows XP SP2 VPN connection.
Default router settings Firmware version 8.0.2
Get the dreaded 619 error.
Worked fine with my old (albeit slow) Netgear router
Using a wired connection to the router.
Internet connection is Charter Cable (Motorola Surfboard 5100)
ANy ideas HOW to make this work

Error 619: -
1. The port was disconnected ,.When using VPN to access a remote network, W2K clients mat get above errors but not win9x and ME clients. This issue occurs because the VPN server hasn't registered in Active Directory.
2.You get this message when connecting via cable modems, dial up DOESN'T have any issues.
Resolution: -
1) This problem most likely is secure issue such as unsecured password. So, check the settings.
2) It could be the hardware issue. Try to re-setup the device or download the new driver or just reset the devices such as modem and router.
3) Reapply the service pack
4) If the RRAS is in a domain network, add the VPN to the appropriate group. To do this, go to Active Directory Users and Computers>domain name>Users, double-click the RAS and IAS Servers security group. Select the members and add the VPN server to this group. 2) Type netsh ras add registeredserver at a command prompt (registeredserver is vpn server name), and then press ENTER.
5) If the router is connectijg to a modem and setup DHCP to receive IP from the modem, you may try to assign static IP to the WAN port on the router.

Am using osx lion 10.7.2 on a mid 2010 macbook, and cannot empty my trash bin. it verifies files to delete and then quits. anyone got any ideas how to fix this?

am using osx lion 10.7.2 on a mid 2010 macbook, and cannot empty my trash bin. it verifies files to delete and then quits. anyone got any ideas how to fix this?

This utility may help > Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com

Has anyone got NVrotate to work under Win98SE?

I installed the latest driver for this card for Win98
NVrotate is not available as an option in Win98SE
Display properties-->settings -->GeForce FX5200
I temporarily moved a drive with WinXP Pro onto this machine.
NVrotate is an available option in
Display properties-->settings -->GeForce FX5200
and works fine.
But for various compatibility reasons this machine has to been running Win98SE.
Has ANYONE got NVrotate to work under Win98 ??????
MSI FX5200 TD128
Gigabyte GA-7VAX
AMD 2400+
17" Analog LCD & 18.1" Analog LCD

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

Signed applet on local filesystem not working anymore

Hi,
Everyone knows that accessing local file system has always been a security threat.
But clients are our bread and butter.
Our clients have asked for web app consisting in a zip file, downloaded, containing an html page with dynamic content and links to many pdf.
So far, so good: i download my zip unzip it, access my pdfs, and once every pdfs have been modified, i click on a button that is from a signed applet, and the applet checks which pdfs have changed, and post the files to a web service on a server....Et voilà.
It's been working for at least 5 years like that.
But now my clients are updating to jre 7u45.
And as A LOT OF PEOPLE HERE....my applet won't load and work if i compile it with the new sdk....: i get the InvocationTargetException...exception
Is there an easy way to , step by step, compile , sign and yadi yada...and make it work.
I mean my applet has always did its job..., nothing will change in the code...it's only the annoying changing everything without warning.....
Anyone whould have an alternate approach instead of applet (my guess is NO).....: but nowadays with an applet you program 5 hours and you deploy 10 days.

I have the same issue here and it is not working anymore with auto-signed certificate too
I am going to stop using Safari if that , all is working fine with Chrome Firefox and Opera
Apple says
As a good security practice, you should validate PGP keys you receive, and not trust keys that cannot be validated. Information to validate the Apple Product Security PGP Key is available from
Maybe but this is my problem and if I want to trust anyway I must use another browser

[Solved] KDE 4.4 Knetworkmanager, has anyone got this to work yet?

Been trying to get knetworkmanager working on KDE 4.4 and haven't got it to work yet. Well initially it did work. Here's the steps I did.
1) Had network running '/etc/rc.d/network start
2) Installed 'kdeplasma-applets-networkmanagement'
3) Commented out interfaces in '/etc/rc.conf' and defined dhcp:
eth1="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
4) Set hostname in '/etc/NetworkManager/nm-system-settings.conf':
[main]
plugins = keyfile
[keyfile]
hostname = pavilion
5) Added 'networkmanager' to daemon array in '/etc/rc.conf'
DAEMONS=(syslog-ng crond alsa hal kdm dnsmasq networkmanager cups netfs)
6) Added 'network' group to user:
gpasswd -a gen2ly network
7) Stopped network '/etc/rc.d/network stop'
8) Brought down interfaces 'ifconfig eth0 down && ifconfig eth1 down && ifconfig wlan0 down'
9) Started networkmanager
/etc/rc.d/networkmanager start
10) Started networkmanager applet (seems to me it was already started but I guess not??)
11) Got connected to network.
After reboot however, the networkmanager applet is telling me 'Unmanaged' when I rollover it, and when I click it it says 'Network Management disabled'. I've tried a couple things (like un-commenting the network devices on the interfaces line and restarting) to no effect. Doesn't seem I'm able to get it up again. Anyone else had luck with this? Did I miss something?
Last edited by Gen2ly (2010-02-23 22:51:57)

Ah, anti-destin that is exactly what was needed to be done. ... Thank you! Threw be off a bit, it did .
Off-topic somewhere here now, Ok, a good deal off-topic.. looking at the wiki page for configuring I think the wiki under section, 'Disable interfaces' is erroneous. Does NetworkManager really parse rc.conf? I can't think of any reason it would need to. I'm thinking that NetworkManager would naturally scan and then do dhcp on wired, followed by wireless. And for those that do a static ip, they can configure the applet. To test, I put this in my rc.conf:
#eth0="dhcp"
#eth1="dhcp"
#wlan0="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
And it worked fine. I'm thinking I could erase them and not have a problem.
[wiki]Networkmanager#Disable_interfaces[/wiki]
Last edited by Gen2ly (2010-02-23 06:03:45)

RegisterAlarm - has anyone got this to work?

I'm trying to get the registerAlarm function to work on a real phone, but it only works one time. I want the Midlet to be executed once every 30 sec, but after the first reschedule it stops rescheduling.
Does anyone have a clue on what's wrong? I do everything according to the book as far as I know.
I've looked everywhere, and have not been able to find anyone that actually has got this to work. Is it a bug in Midp 2.0? Does registerAlarm work more than once?
Below is some of my code that SHOULD work (<My midlet...> is replaced with the full name of my midlet class)
protected void startApp() throws MIDletStateChangeException {
try {
//some code...
destroyApp(false);
} catch (Exception e) {}
protected void destroyApp(boolean unconditional) throws MIDletStateChangeException {
try {
scheduleAlarm(30000);
notifyDestroyed();
} catch (Exception e) {}
protected void scheduleAlarm(long nextAlarmTime) throws ClassNotFoundException,ConnectionNotFoundException, SecurityException {
long nextAlarm = new Date().getTime()+nextAlarmTime;
try {
long t = PushRegistry.registerAlarm("<My midlet...>", nextAlarm);
} catch (Exception e) {}
}

...even starting the Midlet manually to force a rescheduled task won't work, but what is strange, is that if I turn the phone completely off and back on again, I can get it to work one more time.
I'm confused.

Has anyone got Safari to work with Kerberos (SPNEGO) ?

Has anyone got Safari to with using Negotiate (SPNEGO with Kerberos) when the system is not bound to ActiveDirectory or Macs OpenDirectory?
I can load Firefox and it works fine, but Safari does not work. I keep hearing that Safari works out of the box, but its looks like its somehow tied to AD or Macs Opendirectory and its deployment of Kerberos.

I am having the same problem and checked out the Apple Discussions for a solution.
I too am meticulous with my addresses.
Seeing no solution I went back to testing.
I have tried:
From Shrewsbury
To Telford
The result was a trip in the US taking 14 hours.
Then I tried:
From Shrewsbury UK
To Telford UK
This worked.
When on the "Get Directions" screen there is a "Globe" icon by the "Space" icon. Pressing this brings up "English (US)". Press again and you get "English (UK).
Any ideas?
When I use the "Contacts" to get the Start and End fields the iPhone is bringing up the correct address but with "United States" at the end of the address.
Again any ideas?
In my Address book I never use the "Country" field as all my contacts are in the UK. I wonder if this is the problem and the iPhone is defaulting to US in the absence of no "Country"?
Help!

Has anyone got Python to work on the N96???

Has anyone got Python to wok on the N96?
I have downloaded and installed the latest edition 3rd 1.4.4 i think. it goes on the phone without any problems.
However when trying to use app that use python specifically pyPiow at the moment the app goes on the phone but nothing happens when i try to open it!
is it somthing i am doing wrong, where go i install the pictures, or the apps for that matter, can the apps go on the mass memory where they are now or do they have to go on the very small phone memory?!
does current python work at all on the n96
has anyone had any joy?
please help!
cheers

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got Aperture 3 working as it should?

I know it's very easy to become a vocal majority but everyone here seems to have some sort of problem with Aperture 3 whether it's related to the software or the operating system, so I was wondering if anyone actually has this working perfectly with no disruptions? Then perhaps we can compare set-ups to see what is going wrong.
Then Apple might sit up and take note!!

I have had no problems for the past 3 weeks other than I think the retouching features still need to be faster......... until yesterday when I was editing and exporting a volunteer job. There were only 33 files to edit and export. I had to do a restart and repair permissions before the images would take the edit (only white balance and density), but it finally applied. When I went to export versions, it says "Exporting" but never did export. Nothing appeared in the file. Had to Force Quit to exit the function.
Curiously, Aperture has been "Updating Library" all this time without ever completing the task. It indicates processing app 2600 files, so I don't know what is taking it so long.
I did turn on Face Recognition yesterday morning but turned it back off after the problems- don't know if that has anything to do with it.
I am currently trying to see if it will export "1" file from another project, but no good still.
Will let you know if there it fixes.
BTW. I also have my main library and images stored on an external hard drive. Has worked well for me for the past 8 months. Saves me dumping images off my drive every other week.
Cheers, Howard
Message was edited by: Howard Prendergast

Anyone got Poser 8 working in Photoshop CS5/5.5 3D?

Has anyone got Poser 8 figures to import into PS CS5 extended?
I understand CS5 doesn't like Collada files and now OSX Lion won't open Poser.
I know obj will show up in PS, but not always with the materials.
Any one figured this out yet, or do I have to wait for Poser 9 and PS CS6?

Yes, I created a PDF:
https://acrobat.com/#d=ffzYf2nA5yypUrknBPFOMw
And a video that shows you how to do this.
Let me know if you have any other questions,
Daniel

WMG54G Music Bridge & Windows 7 - Anyone got it to work?

I have been trying to install the utility program, which includes the driver, for the Linksys WMB54G Music Bridge. So far I have failed to make it work under Win7. After much research on many forums I seem to be able to get the utility to run and according to the Win7 hardware manager the driver is loaded and installed and working correctly. Unfortunately, when I scan for my device it does not appear in the utility and thus I cannot play music through it.
I should say at this stage that the device control page is fully accessible on my network by using a browser on Win7 so it is 'seen' by the system.
These are the things I have done:-
1) Installed the Vista computable version of the utility and driver (V1.3).
2) Tried to connect to the bridge both by ethernet and WiFi.
3) Have tried setting all the executable files to run with WinXP (SP2) compatibility and as administrator.
4) Have tried with UAC and the Windows Firewall off.
5) Have tried setting a static IP address with other associated parameters.
6) Have searched many forums but am unable to find anyone using (or failing) with this device on Win7.
I know this is a long shot as this isn't a terribly popular piece of kit, but when it does work it is excellent. I'm wondering if anyone has heard any information or got this working, or not.
Maybe I'll just have to content myself with the fact that this device (with the existing Vista driver) doesn't work with Win7.
Thanks for reading.
Sol.

I tried compatibility mode, both XP and Vista, and it still crashes when starting up. Will try to re-install.
I have an old laptop running XP and I was able to get it working. Here are the issues:
- Client app won't start on Windows 7. It can't be that complex of an app.
- Implementation of WEP 128 is bad. I can only get it to work with WEP 64. Hopefully WPA will work, but haven't attempted yet.
- Crashes router's wireless connection after about 5 minutes of playing time.
Really disappointed as this thing seemed so cool. I already spend way to much time on this. Will attempt again with a different router. If it fails, will have to RMA...
Message Edited by bryawn on 06-05-2009 04:54 PM
(Mod note: Edited for guideline compliance.)
Message Edited by kent07 on 06-05-2009 05:19 PM

Hotmail Plus' SMTP Server, anyone got it to work?

HI All,
Well, my gf just got a new macbook after I finally converted her to a mac, but now I am trying to set up her Hotmail plus account in Mac Mail. (because entourage is too slow)
Since microsoft is now offering a pop3/smtp service for their plus members, I decided to upgrade her account and pay the 20 bux.
so far so good.
Obviously, when I try to set up her hotmail account in outlook on windows, or in entourage in mac, it works perfectly.
Only thing is, I want to use it in mac mail.
so I got the necessary info from microsoft (after 20 emails back and forth, and them pretending not to understand my question...)
POP: pop3.live.com (port 995)
SMTP: smtp.live.com (port 25)
Note: make sure you check the box that indicates that your outgoing server requires authentication (in most mail clients this is not checked by default).
Username: your full email address
Password: your Windows Live ID password
After setting up in mac mail with this info, I can now receive emails perfectly.
The only problem is that I cannot send any.
the smtp server seems dead, or non existent.
So my question is, is there anyone out there who got this to work? in mac mail or any other pop3 program?
I think its not a port problem, as I send my own mail on my own smtp server on the same router using port 25 as well.
Lastly, I would like to clarify that I do understand that hotmail *****, but moving to gmail or anything like that is not an option for her, its too big a hassle atm, so please do not respond if that was going to be your response
Ok, I really hope someone out there made this work.
Cheers, and thanks for any help/suggestions in advance.

I have exactly he same problem. Trust me, I know how you feel about switching. When I saw the green star I thought I finally stumbled across the answer. Don't know why you marked the question answered. I have tried all the different ports, none of which worked. I'm so looking forward to solving this one.

Opera 6 and signed applets - Anyone got it to work ?

Similar Messages

Maybe you are looking for