Opera 9.5 the beta 1 is coming for the 15 july can...

hi somebody can tell me if i can update my opera 8.1 in my nokia n70 music edition with opera 9.5 beta thanks a lot for that info

If you want 9.5 you have to pay for it. It is not provided as a free update as the software does not belong to nokia.

Similar Messages

When is the next firmware coming for the N97

When is the next frimware due for the N97, V20 made it easier to use with kinectic scrolling, apart from that, it has made my phone slower, unresponsive, freezes alot, and caused more bugs innit.
Is there another one coming out to maybe fix the rest of the bugs since V20 is suppose to fix some bugs not all of them, what about the rest of them.

There was an announcement by xbungle in the "software updates" section that the next update for the N97 would be released mid to late next month.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my i

I recently bought a new i phone 4 as my other one had seen beter days and for the last sevral days have been trying to transfer my photos ect from my old phone to my new one after I've plugged my old iPhone into iTunes to back it up i then plug in my one to transfer it over I've had no luck I've tryed restoring my new phone to the last time i backed up my old files the phone restores but always to its own backup point wen i first connected it to iTunes can anyone help me please?

Since this is the second computer you've had this problem with, I recommend you look for answers on the iPhone forum. My thinking is it is an iPhone issue rather than a computer issue (unless it is some software incompatibility).

I want better solution for adjusting the Material stock values for the last

my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599    QTY : 10181.03 Ltrs
Material 2 : RS: 1318596     QTY: 2152.76   Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c                      Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

A Better Media Player for the N900???

Just curious if anyone knows of a better media player for the N900....one that will allow the building of playlist like the N95 8GB did. Basically just want to be able to better categorize my music and have specific playlists for different events...workouts, relaxation etc. Thanks in advance
Solved!
Go to Solution.

fardawg wrote:
I just removed the 16GB SD card on which I had all my music stored. I put it right back in....booted the phone up and now the phone doesn't even recognize that the card is installed. Previously, it showed up in Settings....memory as N900 Micro. Now it just shows a red icon indicating that no SD card is installed, when in fact it is. What's up with this phone? One glitch after another. First it fails to find any contacts when creating a new SMS (I have 194 contacts in fact)....now it won't even recognize that the mini SD is installed. I'm seriously considering returning it.
Have you replaced the back on the phone? The phone won't find the card without the back in place.
And you don't have to switch the phone off to remove the card, either.

CCMS Alerts keep coming for the system which was removed from System Monito

Hello SOLMAN Experts,
Iu2019ve noticed quite strange behavior of my SOLMAN CCMS Alerts: CCMS Alerts keep coming for the system which was removed from the System Monitoring.
Have you ever experienced this?
Please advice
Thank you
123

Hi 123,
Please ensure that autoreaction methods are deleted for those systems.
You can verify system to autoreaction method assigments via RZ21 --> Technical Infrastructure --> Configure Central system -->Assign Central Autoreaction
also check if that system is appearing as online as follows
RZ21-> Topology --> system overview --> Monitored and Remote SAP systems
if yes , make it offline to stop triggering alerts.
I hope this information will help you.
Thanks,
Rupali

Preparing my photo library for the beta Photos is taking the better part of a week. Is this normal?

The process of "preparing" my photo library for the beta Photos is taking the better part of a week. Is this normal? I have around 2000 photos the iPhoto library I am uploading.

How are you preparing the library? The only thing I would do to prepare for converting to Photos once it's released would be the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #1, Repair Permissions.
3 - run Option #4, Rebuild Database.
Do this just prior to launching Photos for the first time.

What are the avilable learning meterials for the Exam 71-532 Developing Microsoft Azure Solutions (beta)

I need to know what are the available course materials for the following MCP exam.Thanks
Developing Microsoft Azure Solutions (beta)
Dileepa S. Rajapaksa
Trainee Developer
Microsoft, Sri Lanka
Twitter : @dsrajapaksa
Blog : http://www.dileepatech.net

hi,
here just one MOC course listed:
https://www.microsoft.com/learning/en-us/exam-70-532.aspx
MOC 20532:
https://www.microsoft.com/learning/en-us/Course.aspx?ID=20532A
regards
Thomas

I tried to restart my ipad. Instead of the apple logo coming up, the wheel is up and has circled for hours. I don't know what to do about this. Can anyone help? Thanks.

I tried to restart my ipad. Instead of the apple logo coming up, the wheel has circled for hours. I don't know what to do about this. Can anyone help? Thankis.

Hard Reset.
- Hold down the Home Button (Circle button with White Square in it)
- Wait for the 'Slide to Unlock' screen pops up
- Test to see if the issue is resolved.

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

[svn:fx-trunk] 11625: The last few cleanups for the OSMF video player.

Revision: 11625
Author:   [email protected]
Date:     2009-11-10 12:03:43 -0800 (Tue, 10 Nov 2009)
Log Message:
The last few cleanups for the OSMF video player. Hooking up the videoObject property in VideoDisplay to return the flash.media.Video object. Also, when pauseWhenHidden is set to false, we'll detach all the event listeners on the parents because they are no longer needed.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoDisplay.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as

Hi Chris,
thanks for your tip. I didn't get around to trying it, as I have just solved the problem:
Unless I misunderstand how things are supposed to work, I think I also might have found a bug (or at a minimum an usability issue):
When I talked about having relaxed all the local storage settings in my original post, I meant that in the System Preferences / Flash Player / Storage pane I had set "Allow sites to save information on this computer". I also had done some experimention around the "Ask me" and "Settings by Site" options - all without success. I had navigated to that pane by right-clicking on "Global Settings" from the non-working video players.
However, just now I discovered the following: When I navigate to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l (the embedded Global Storage Settings Panel) I found that in fact "Allow third-party Flash content to store date on your computer" was disabled all along!
So effectively, the System Preferences Pane and the Global Settings Manager were not in sync / had conflicting settings and it looks like the Global Settings Manager took precedence. When I enabled local storage in the Global settings manager, things started working immediately.
This is extremely easily reproducable by the way: Just change some settings in the Global Settings Manager and then right click "Global Settings" within it and the Preference Pane coming up will be in conflict with the settings manager.
(Even if this is somehow by design, its quite confusing)
Hope this helps future readers with the same issue. Also, this is an issue in 11.3 Beta 2, so maybe your teams can still fix this for 11.3
Thanks,
Jens

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Is it possible to install the beta and also keep the newest v. of 3 on my system... as a failsafe?

After all the 'issues' I've seen in the Faq, I was wondering if it were possible to 'sequester' v. 3.6.15 as a fall back/fail safe, just in case 4 has issues with my system. . . it's old.

Yes, when you install the beta it doesn't replace the older version of firefox that you have. This is normal procedure for all Firefox betas. If you don't like the beta, just uninstall it, the previous version will still be there.

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

[Extend DBI] specify the drill-down report for the custom report column

Hi,
I realized two custom reports by using the extend DBI tools:
1st report displays the sum of invoices amounts grouped by Operating Units.
2nd report display the details of invoices for all Operating Units
In the 1st report I specified a link on the column Operating Units to drill-down at 2nd report.
The problem is how specified the drill-down link so that the 2nd report display only the detail of invoices for the selected Operating Unit?
Thanks.

Adding the time dimenstions like Year, Quarter, Period, Week is quite possible.
Steps would be:
1. make sure your data source (Table/View has these columns). If you don't have them you can generate them by joining the date of the data table with FIII_TIME_DAY.
2. Map these new columns to appropriate Dimesnions. (Lile Enterprise Year, Enterprise Quarter etc.)
Once you have done these two your report will work for the Time Dimensions.
I dont think its possible to get the Prior Period functionality unless you use a generated datasource.
Regards,
Sudeep

Failed to allocate port(s) in the specified range(s) for the following....

Hi,
I'm attempting to install oracle 10.2.0 on Solaris 10.
When I create a database i get the error:
Failed to allocate port(s) in the specified range(s) for the following process(es): .....
So I look at the logs and there looks like to be some configuration issues but i'm not sure where to start.
I've changed the port from NULL to 1521 in listener.ora.
It worried me that it was set to null.
Ive tried running emca -config -all db ( not sure what central agent home should be set it as /app/oracle/product/10.2.0/Db_1 seemed to accept that)
This gives me the same above error.
Any help is greatly appreciated. Please note im both a novice solaris and oracle user
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log.
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: DBSNMP
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 691205234
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYSMAN
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emd.prop
erties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties has been copied to /app/oracle/product/10.2.0/Db_1/s
ysman/config/emd.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.
properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties has been copied to /app/oracle/product/10.2.0/Db_1
/sysman/config/emoms.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml to /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml.emca.
tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml has been copied to /app/oracle/product/10.2.0/Db_1/sysman/
emd/targets.xml.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 agentHome: null isCentral: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /app/oracle/product/10.2.0/Db_1/oui
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [app/oracle/product/10.2.0/Db_1]
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /app/oracle/product/10.2.0/Db_1
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /app/oracle/product/10.2.0/Db_1/install/staticports.ini
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Contro
l [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log for more details.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [55
40-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
Also got thie error in another log
Cluster Error Message: PRKH-1010 : Unable to communicate with CRS Services

thanks mathias,
but i have already done, netstat -na |grep portnumber
but nothing no port in range are set
thanks howevar
regards

Opera 9.5 the beta 1 is coming for the 15 july can...

Similar Messages

Maybe you are looking for