Opera-devel: conflicts with opera ??

I have just attempted to install the AUR opera-devel (10.5) package with "yaourt -S opera-devel" and it fails with:
checking dependencies...
error: replacing packages with -U is not supported yet
error: you can replace packages manually using -Rd and -U
error: failed to prepare transaction (conflicting dependencies)
:: opera-devel: conflicts with opera
==> WARNING: Your package is saved in /tmp/yaourt-tmp-larry/opera-devel-10.52_6272-1-i686.pkg.tar.gz
Any ideas what I do next? Yes, I do already have Opera 10.10 installed.

ruario wrote:
@flamelab: Did you read the known issues in my blog post? Specifically,
ruario wrote:Problems with bitmap fonts, resulting in narrow and multi-colored fonts on some websites
A bitmap font is being selected and then displays corrupted. Either remove fonts such as xorg-fonts-100dpi and xorg-fonts-75dpi (you probably don't need them), or wait for us to fix it.
I'll wait for you to fix it
Last edited by flamelab (2010-04-07 06:53:02)

Similar Messages

Error: exo-devel conflicts with exo [SOLVED]

I am trying to install xfce4-goodies and I receive an error about exo-devel conflicting with exo when trying to install. Any suggestions?
error: exo-devel conflicts with exo

Snowman wrote:Perhaps you have a custom/unofficial repo in your pacman.conf. However, this should work:
# pacman -S exo
# pacman -S xfce4-goodies
No custom or unoffical repos in pacman.conf.
I tried your suggestion above, and am seeing this...
# pacman -S exo
Targets: exo-0.3.0-3
Total Package Size: 0.2 MB
Proceed with upgrade? [Y/n]
:: Retrieving packages from extra...
exo-0.3.0-3 [################] 100% 212K 276.0K/s 00:00:00
checking package integrity... done.
loading package data... done.
checking for file conflicts... done.
installing exo... done.
After that I attempted to install xfce4-goodies and receive the following...
# pacman -S xfce4-goodies
:: group xfce4-goodies:
exo terminal xfce4-artwork xfce4-battery-plugin xfce4-clipman-plugin
xfce4-cpugraph-plugin xfce4-datetime-plugin xfce4-diskperf-plugin
xfce4-fsguard-plugin xfce4-minicmd-plugin xfce4-netload-plugin
xfce4-notes-plugin xfce4-sensors-plugin xfce4-showdesktop-plugin
xfce4-systemload-plugin xfce4-taskbar-plugin xfce4-wavelan-plugin
xfce4-weather-plugin xfce4-windowlist-plugin xfce4-xkb-plugin
xfce4-xmms-plugin exo-devel
Install whole content? [Y/n]
:: exo-0.3.0-3: is up to date. Upgrade anyway? [Y/n]
Remove: exo
Targets: exo-0.3.0-3 vte-0.12.2-1 terminal-0.2.4-4 xfce4-artwork-0.0.4-2
xfce4-battery-plugin-0.3.0-2 xfce4-clipman-plugin-0.4.1-3
xfce4-cpugraph-plugin-0.2.2-3 xfce4-datetime-plugin-0.3.1-3
xfce4-diskperf-plugin-1.5-3 xfce4-fsguard-plugin-0.2.0-3
xfce4-minicmd-plugin-0.3.0-2 xfce4-netload-plugin-0.3.3-1
xfce4-notes-plugin-0.11.0-1 xfce4-sensors-plugin-0.7.0-1
xfce4-showdesktop-plugin-0.4.0-2 xfce4-systemload-plugin-0.3.6-2
xfce4-taskbar-plugin-0.2.2-2 xfce4-wavelan-plugin-0.4.1-2
xfce4-weather-plugin-0.4.9-2 xfce4-windowlist-plugin-0.1.0-3
xfce4-xkb-plugin-0.3.5-1 glib-1.2.10-6 gtk-1.2.10-7 xmms-1.2.10-7
xfce4-xmms-plugin-0.3.1-2 perl-uri-1.35-1 exo-devel-0.3.1.8beta2-1
Total Package Size: 8.7 MB
Proceed with upgrade? [Y/n]
:: Retrieving packages from extra...
vte-0.12.2-1 [################] 100% 1065K 419.9K/s 00:00:02
terminal-0.2.4-4 [################] 100% 695K 391.9K/s 00:00:01
xfce4-artwork-0.0.4-2 [################] 100% 1728K 438.8K/s 00:00:03
xfce4-battery-plugin-0.3 [################] 100% 21K 62.8K/s 00:00:00
xfce4-clipman-plugin-0.4 [################] 100% 6K 22.7K/s 00:00:00
xfce4-cpugraph-plugin-0. [################] 100% 13K 41.4K/s 00:00:00
xfce4-datetime-plugin-0. [################] 100% 13K 31.4K/s 00:00:00
xfce4-diskperf-plugin-1. [################] 100% 16K 47.4K/s 00:00:00
xfce4-fsguard-plugin-0.2 [################] 100% 12K 31.3K/s 00:00:00
xfce4-minicmd-plugin-0.3 [################] 100% 6K 20.5K/s 00:00:00
xfce4-netload-plugin-0.3 [################] 100% 19K 52.2K/s 00:00:00
xfce4-notes-plugin-0.11. [################] 100% 16K 49.0K/s 00:00:00
xfce4-sensors-plugin-0.7 [################] 100% 23K 58.9K/s 00:00:00
xfce4-showdesktop-plugin [################] 100% 9K 31.3K/s 00:00:00
xfce4-systemload-plugin- [################] 100% 15K 46.4K/s 00:00:00
xfce4-taskbar-plugin-0.2 [################] 100% 6K 23.4K/s 00:00:00
xfce4-wavelan-plugin-0.4 [################] 100% 139K 229.5K/s 00:00:00
xfce4-weather-plugin-0.4 [################] 100% 332K 319.8K/s 00:00:01
xfce4-windowlist-plugin- [################] 100% 9K 31.6K/s 00:00:00
xfce4-xkb-plugin-0.3.5-1 [################] 100% 42K 100.4K/s 00:00:00
xfce4-xmms-plugin-0.3.1- [################] 100% 18K 53.6K/s 00:00:00
perl-uri-1.35-1 [################] 100% 75K 164.3K/s 00:00:00
:: Retrieving packages from current...
xmms-1.2.10-7 [################] 100% 1886K 406.0K/s 00:00:04
:: Retrieving packages from community...
exo-devel-0.3.1.8beta2-1 [################] 100% 592K 301.6K/s 00:00:01
checking package integrity... done.
removing exo... done.
loading package data... done.
checking for file conflicts...
error: the following file conflicts were found:
opt/xfce4/include/exo-0.3/exo/exo-binding.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-cell-renderer-ellipsized-text.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-config.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-ellipsized-label.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-enum-types.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-gdk-pixbuf-extensions.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-gobject-extensions.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-gtk-extensions.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-icon-bar.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-icon-view.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-md5.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-pango-extensions.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-string.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-toolbars-editor-dialog.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-toolbars-editor.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-toolbars-model.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-toolbars-view.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo-xsession-client.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/include/exo-0.3/exo/exo.h: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/libexo-0.3.a: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/libexo-0.3.so: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/libexo-0.3.so.0: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/pkgconfig/exo-0.3.pc: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/exo-0.3/_exo.a: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/exo-0.3/_exo.so: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/exo-0.3/exo/__init__.py: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/exo-0.3/exo/__init__.pyc: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/exo-0.3/exo/__init__.pyo: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/pyexo.py: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/pyexo.pyc: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/lib/python2.4/site-packages/pyexo.pyo: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/share/locale/de/LC_MESSAGES/libexo-0.3.mo: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/share/locale/en_GB/LC_MESSAGES/libexo-0.3.mo: exists in "exo" (target) and "exo-devel" (target)
opt/xfce4/share/pygtk/2.0/defs/exo-0.3/exo.defs: exists in "exo" (target) and "exo-devel" (target)
errors occurred, no packages were upgraded.

Beehive installation :pdksh conflicts with ksh-20060214-1.7.i386

Hi,
I am doing Beehive installation on OEL5.
I got this prerequisite failed....
*Checking for ksh-20060214-1.4; found Not found. Failed.....so the overall check is also failed+.
What I tried:
[_root@stcfmw01 u06]# cd OEL-5_32Bit/OEL-5_32Bit_Disk1_of_5/Server/
[root@stcfmw01 Server]# rpm -ivh ksh-20060214-1.7.i386.rpm
error: Failed dependencies:
pdksh conflicts with ksh-20060214-1.7.i386
[root@stcfmw01 Server]#
[root@stcfmw01 Server]#
i.e it is conflicting with pdksh
Please gimme a solution....
Regards,
Ashlee

Checking recommended operating system packages
Checking for gcc-4.1.1-52; found gcc-4.1.2-42.el5. Passed
Checking for gcc-c++-4.1.1-52; found gcc-c++-4.1.2-42.el5. Passed
Checking for setarch-2.0-1.1; found setarch-2.0-1.1. Passed
Checking for ksh-20060214-1.4; found Not found. Failed
Checking for sysstat-7.0.0-3; found sysstat-7.0.2-1.el5. Passed
Checking for gdbm-1.8.0-26.2.1; found gdbm-1.8.0-26.2.1. Passed
Checking for libstdc++-4.1.1-52; found libstdc++-4.1.2-42.el5. Passed
Checking for libstdc++-devel-4.1.1-52; found libstdc++-devel-4.1.2-42.el5. Passed
Checking for compat-libstdc++-296-2.96-138; found compat-libstdc++-296-2.96-141. Passed
Checking for compat-db-4.2.52-5.1; found compat-db-4.2.52-5.1. Passed
Checking for control-center-2.16.0-14; found control-center-1:2.16.0-16.el5. Passed
Checking for glibc-common-2.5-12; found glibc-common-2.5-24. Passed
Checking for binutils-2.17.50.0.6-2; found binutils-2.17.50.0.6-6.0.1.el5. Passed
Checking for make-3.81-1.1; found make-1:3.81-3.el5. Passed
Check complete. The overall result of this check is: Failed
Problem: Some recommended packages are missing (see above).
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
==============================================

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Do I have a conflict with iTunes 7.6.2 . . or what ?

Dunno if I do or not, but . . shortly after upgrading to iTunes 7.6.2 we suffered a power "Blink" . . and when i noticed it had happened the Mac was attempting to restart . . with a blinking Mac, then a question mark in the icon . . nothing else . . In the past I've seen it once before, and a shutdown and restart was all that was necessary . . This time . . NO . . Nada, same deal, through 8 restarts . .
I finally reinstalled OSX 10.1, and followed with all the updates directly from Apple . . using the "Update" command under the apple . . It now does "funky" things . . like, one, it doesn't recognize the WD External HD on the desk top, but it does in the system profiler . . another, once in a while a dialog box comes up asking what to do with a disk, initialize, eject or ignore . . and probably what leads me to believe it could be a conflict with iTunes is during shut down, iTunes will not "Quit", even when using "Force Quit" . . it will close the desktop, go to a blue screen and then start up again . .
And . . I'd really like to install 10.4 but I can't seem to find anyone with a legal one for sale . . I called Apple a week ago and they said they might produce them in four or five weeks . . what's my options here?

None the less . . we still gots gremlins . .
And while I'm asking . . how come Safari is so fragile? The other nite, my wife and I were making reservations and one motel group's site crashed Safari just about 2/3ds the way through opening every time we tried . . went over to Explorer and it opened about twice as fast and operated smoothly . . This happens a lot at different sites . . always wants to know if I want to report it . . To Who?
Is 3.4.11 going to exorcise those gremlins or do I have to hire some IT Guy . . ? I've owned a Mac of some kind since the Mac IIx, (about 5, I think) but it's a tool, not a toy to me . . I just drive it . . run McJanitor once a month, clean out the icons in Safari's library and all the little maintenance thingies, but I'm no troubleshooter . . .

PP CS6 on Retina Macbook conflicts with YouTube/Pandora

I bought my Retina Macbook recently, and the first thing I did was to install Premiere Pro CS6 on it. I did the hack - inserted GeForce GT 650M to the list - and enabled the Mercury Playback Engine.
Ever since then, I've been having all sorts of problems, but the most annoying problem is that in the midst of editing, somehow Program Monitor would either freeze or black-out.
I seriously tried every possible ways I could do to resolve this as an average user. I tried resetting the preferences, switching the drives, turning the machine on & off, and all the magic joojoos. None of them worked, until I found out the problem starts to happen as I open other applications along with the Premiere Pro opened.
I began to wonder, does the graphic card or Premiere Pro CS6 conflict with any programs I have opened? So I tested it out.
I found out that while having CS6 and Safari (or any kinds of web-browsing programs) on, the "crashes" occur very often. I also found out it typically happens when I turn on Pandora and YouTube.
The moment I shut off the Pandora tab, YouTube tab, or even websites with any kinds of visual or audio media turned on, the freezing or black-out situation on the Program Monitor immediately stops. If turning off the tabs doesn't work, then quitting the program entirely solves the problem.
From what I've tested, it's for sure to say Flash or Video Playback on webpages conflicts with GT650M card. It's certainly not the software problem, because when Software Only mode is turned on, all the images come back on the Project Monitor. I mean, what kind of weird conflict is this?
Can anyone else with a Retina MacBook confirm this?
In case if Anyone is wondering, this is the setup I've used.
Retina Display Macbook Pro
16GB Ram option
256GB SSD option
NVidia GT650M 1GB VRAM
Video files in the SSD

It's absolutely woeful.
Like traveling back in time with modern software and putting it on last generation hardware... or two generations previous hardware.
What floors me the most is that there's not any spikes or even utilisation of the CPU and GPU going on... I have CPU and GPU monitoriing software for the more beserk applications I use. I checked them out when using Illustrator and Indesign. The CPU and GPU is hardly getting tickled... so it's JUST poor software engineering at work. VERY POOR software engineering.
There's at least 90% of the CPU and GPU power completely unused during moving operations and object creation. So it COULD be fast, and performant, if they cared to actually use the CPU and/or GPU more effectively/thoroughly when we want to DO something inside the software.
I don't even know how you'd code something this woefully under performant. You'd have to plan to do it, or be using MONO or some other uselessly single threaded, low priority frame work...
Maybe these apps are programmed in Java

Qt3-enhanced conflicts with qt3 though I have no qt3

Hi,
I'm trying to install KDEMod, after a clean installation of Arch.
# pacman -S kdemod-base
:: group kdemod-base:
kdemod-arts kdemod-gnu-gift kdemod-kde-common kdemod-kdebase
kdemod-kdelibs kdemod-perl-xml-xql kdemod-ui-kde qt3-enhanced
:: Install whole content? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: qt3-enhanced: conflicts with qt3
But i searched my system, there is no qt3 or kde related stuff installed:
# pacman -Q | grep qt
# pacman -Q | grep kde
both return nothing.
How do I solve this?
Thank you
PS: I previously install opera-static. But nothing changes after i removed it.
Last edited by Mr_Shameless (2008-06-01 02:11:56)

Thank you very much though i didnt have the chance to try that. I tried a fresh install of the new 2008.03 release and didnt have that problem

Auscompgeek: latest Firefox update has caused a conflict with Norton 360

Latest Firefox update has caused a conflict with Norton 360 "Web Safe" feature when using Yahoo search - no icons visible, i.e., green check mark for OK, gray for not enough info in Norton user data base, RED for unsafe
"Web Safe" feature functions in Firefox if Norton tool bar search is used (powered by ASK) - functions in IE8 when Yahoo search is used.
Problem is isolated to Firefox / Yahoo search.
No prior history of similar problem.
== Operating system ==
Windows 7

Result from https://www.mywot.com - WOT link is :
SERVER NOT FOUND

Airport conflict with television setup?

so i just set up my airport right next to my television setup (direct TV tivo), and now the tivo will not respond to the remote control... is there some kind of conflict going on there? well, obviously, duh... anyone else ever have this problem? any ideas for solving it? thanks in advance...
imac Mac OS X (10.4.8)

chalkyp, Welcome to the discussion area!
Typical TV remotes use infrared which shouldn't have any conflict with a wireless network.
Is it possible that your remote is an RF remote operating at 2.4 GHz? That could be affected by the wireless network.

Avahi conflicts with nss-mdns. [solved]

I'm confused. Went to update today, and got this message:
:: avahi conflicts with nss-mdns. Remove nss-mdns? [Y/n]
I thought 'Fair enough...' but I always check packages like this with -Si to know what's actually happening in my system. Soo, I run:
$ pacman -Si avahi
Repository : extra
Name : avahi
Version : 0.6.6-2
Groups : None
Provides : howl mdnsresponder
Depends On : dbus libcap libdaemon nss-mdns
Conflicts With : howl mdnsresponder
Replaces : None
Size (compressed) : 557952
Description : A multicast/unicast DNS-SD framework
MD5 Sum : 52ec5424dde107d8099637feb3076925
Now, this is why I'm confused. -Si tells me avahi depends on nss-mdns. When I try to install, it tells me they conflict.
So.... which is right?
-=edit=-
Okay, I've found something else out that may be pertinent. Currently, the packages I have for avahi and nss-mdns depend on each other. That is:
$pacman -Si nss-mdns avahi
Name : nss-mdns
Version : 0.7-3
Depends On : avahi
Required By : avahi kdelibs
Name : avahi
Version : 0.6.5-1
Depends On : dbus libcap libdaemon nss-mdns
Required By : nss-mdns
However there are new packages for both avahi and nss-mdns available in the repos. (0.7-4 and 6.6-2 respectively)
The thing is, pacman isn't picking up the new nss-mdns package with a -Syu operation, and gives me that conflicts line... I'm going to try updating nss-mdns first then see if that fixes it.
-=edit again=-
Geez, I hate it when I post something and moments later figure it out myself. The newest versions of nss-mdns and avahi break the dependancy cycle I noted above; that is, nss-mdns no longer depends on avahi. If I manually updated nss-mdns first, pacman now installs avahi with no problem.
I'm wondering, is this worth a bug report? I'm not surprised a cyclic dependancy like that would cause wierd behaviour...

murkus wrote:snip
$ pacman -Si avahi
Repository : extra
Name : avahi
Version : 0.6.6-2
Provides : howl mdnsresponder
Depends On : dbus libcap libdaemon nss-mdns
Conflicts With : howl mdnsresponder
You get that error because they DO conflict. Do you have mdnsresponder installed?
If so, and you want avahi, then you'll have to remove mdnsresponder and install avahi.

Haskell-x11-extras conflicts with a required package?

I've been using Xmonad for a little while now, and have recently aquired a second monitor, so I read up on how to configure dual head setup. It seems I need to install haskell-x11-extras before reinstalling xmonad. I use yaourt to do this, and it builds OK with the exception of a few warnings about depricated use of defaultUserHooks (safe to ignore this?). When it starts to install an error states that this package conflicts with haskell-x11. So I remove haskell-x11 and try to install haskel-x11-extras again from the .pkg.tar.gz but then I get an error informing me that it requires haskell-x11 !
So I'm stuck in an infinate loop and may have inadvertantly broken time & space. Sorry about that
Anyone know how I can fix this? My goal is to use xmonad in dual head setup so if there is another way that avoids the extras package altogether, then I'd like to hear it please. So far, my mouse pointer can traverse to the second screen and back again but I can't send any apps over to it.
i'm at work at the moment using an inferior operating system, so the above was from memory but if anyone needs me to post the exact ouputs I'll do it when I get home in a few hours.
Thanks

I can confirm the conflict between gnutls and autogen. Got the same error on "-Syu". My workaround for right now is to wait for either a new gnutls or autogen.
Edit: I'm x86_64 if that makes any difference.
Last edited by headkase (2012-02-20 09:20:35)

Starting PG with CUCM PIM causes conflict with previous PG with CUCM PIM

So far I've got running PG1 with CUCM and CVP PIMs, and PG5 with CUCM and VRU PIM (for 3rd party VRU). They both seem to be running well.
Now I've added PG6 with CUCM and VRU PIMs, and when it is started, PG6 causes conflict with PG5 - rtr log shows right away that PG5 CUCM PIM got disconnected, not operational, and offline.
Is there some limit on the number of times CUCM PIM can be added to various PGs?
The system is Cisco UCCE 9.0.
Thanks in advance.

But I am actually running several more PGs on the same system but they all VRU PGs.
I've got PG4, PG7 VRU running.
Does VRU fall into a different category?
BTW, we have another system UCCE 10.5 and my co-worker claims that he could not create 3rd PG, the system only allowed him 2 PGs per system.
On the system that I am using that is UCCE 9.0.3, I can create as many PGs as I want - the system does not limit PGs at all.
Is this something new with 10.5? Or is it different configuration mode (production versus development)?
Thanks.

Import mode FULL conflicts with export mode TRANSPORTABLE

Hi,
We are trying to import transportable tablespaces and are getting an error "import mode FULL conflicts with export mode TRANSPORTABLE. This is the second time we've seen it, the common thread seems to be that it only shows up with the remap_schema qualifier (the example below is with ASM, but we have seen it also without ASM). Does anyone have any suggestions as to how this can be resolved?
Thanks,
Dan
impdp SYSTEM/xxxxx@DEVSUP DIRECTORY=CSF_DIR DUMPFILE=csf_au_q412_b1.dmp logfile=dev_imp.log TRANSPORT_DATAFILES='+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1130.804322725','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.631.804322681','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.798.804322635','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.968.804322581','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1261.804322791','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.1727.804322951','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.309.804322865','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.684.804323047','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.752.804323141','+DATA/PMDEVSUP/DATAFILE/CSF_AU_Q412_B1.843.804323247' remap_schema=CSF_AU_Q412_B1:CSF
ORA-39002: invalid operation
ORA-39061: import mode FULL conflicts with export mode TRANSPORTABLE

We are trying to import transportable tablespaces and are getting an error "import mode FULL conflicts with export mode TRANSPORTABLE
impdp SYSTEM/****@ESUST DIRECTORY=CSF_DIR DUMPFILE=csf_na_q212_b1.dmp
TRANSPORT_DATAFILES='+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1907.805396709','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1908.805396709','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1909.805396653','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1910.805396647','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1911.805396591','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1912.805396591','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1913.805396535','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1914.805396535','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1915.805396479','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1916.805396479','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1917.805396425','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1918.805396425','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1919.805396369','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1920.805396365','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1921.805396321','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1932.805396319','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1933.805396263','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1934.805396261','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1935.805396205','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1936.805396201','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1937.805396137,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1938.805396137,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1939.805396081','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1954.805396079','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1958.805396013,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1959.805396013,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1960.805395937,+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1961.805395923','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1962.805395867','+DATA/PMESUST/DATAFILE/CSF_NA_Q212_B1.1963.805395867' remap_schema=CSF_NA_Q212_B1:CSF
ORA-39002: invalid operation
ORA-39061: import mode FULL conflicts with export mode TRANSPORTABLE

Will 2 routers running in server mode with no vtp domain defined conflict with each other when connecting over layer 2 sonet?

Our remote site has a 3845 router running MPLS to connect back to our other 3845 locally. The ISP has provided us a layer 2 sonet connection with no other configurations necessary with the exception of configuring the layer 2 portion on our side. Both of these 3845 routers are in "server mode" with "no vtp domain" specified. Will this cause an issue/conflict when the remote router bypasses the MPLS for the faster 100MB layer 2 connection?

Jon,
Excellent answer. Our two 3845 routers are about 400 miles away and we're trying to bring up a layer 2 100MB sonet connection over fiber connected to the GIG0/1 port on each router. I was worried that essentially having these 2 routers back to back over layer 2 may cause issues since our remote site has a higher revision number than our local site. It appears since we're configuring an ip address on each router and then adding the network to ospf this shouldn't conflict with our 2 routers. Below is how each router VTP is configured with the exception our remote site has 1 extra VLAN and a higher revision number.
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 68
Number of existing VLANs        : 5
VTP Operating Mode              : Server
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Enabled
MD5 digest                      : 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70

Opera-devel: conflicts with opera ??

Similar Messages

Maybe you are looking for