Opera quick search for archlinux

I found gentoo has nice search bar for opera http://gentoo-wiki.com/Search_Bar_Plugin#Opera
I tried to do same for Arch, but I only succeeded with wiki.
~/.opera/search.ini
[Search Engine 11]
Name=Archlinux wiki
Verbtext=0
URL=http://wiki.archlinux.org/index.php/Special:Search?search=%s
Query=
Key=aw
Is post=0
Has endseparator=0
Encoding=utf-8
Search Type=0
Position=-1
Nameid=0
Deleted=0
I tried to do the same for the aur packages, forum, core and extra packages and bugs w/o any luck.
Has anyone succeeded in this?
It would be nice to deliver opera with arch search bar

I used too many nice hours of the sunday to figure out how the **** this works, puuh. Not once I tried the right click

Similar Messages

PCUI - Quick search for Activities

Hi Group,
I need to add a quick search to activity application. Basically what I want is to do a fast search (GET) based on activity number. I tried to set this up in search group but the PUCI book says the search group is only used for advanced search.
Could you let me know where I need to set this up?
Thanks,
Chandrika

Hi Chandrika,
you only have to add field OBJECT_ID (from the underlying structure CRMT_BSP_ACTIVITY_SEARCH) to the field group ACT_ADVANCED_SEARCH or if it is already within this field group you should check if the parameter 'Not in List' is checked (uncheck it).
Don't forget to generate the field group ACT_ADVANCED_SEARCH afterwards.
Regards
Michael

Quick search for multiple keywords

I haven't seen this anywhere else, and I just discovered it yesterday: If you type in several keywords separated by commas, it will search all the images in the folder/album/project that have all the specified keywords. No need to bring up the search HUD and click on individual keywords. It's been a big time saver for me when trying to narrow down a search.

I haven't seen this anywhere else, and I just
discovered it yesterday: If you type in several
keywords separated by commas, it will search all the
images in the folder/album/project that have all the
specified keywords. No need to bring up the search
HUD and click on individual keywords. It's been a big
time saver for me when trying to narrow down a search.
That's a nice little trick! Thanks for sharing.

Robot Operating System (ROS) for Archlinux?

I've been trying to install Robot Operating System on Arch for a few days now and I keep getting stuck on different places each time. Has anyone been able to successfully install this software on Arch lately? If so, how did you do it? The instructions on the www.ros.org website are dated. I also understand that Arch isn't wasn't the supported operating systems.

I am interested in this. I know that at least one of the main ROS developers have it working on Arch, but don't know any details. There are a bunch of packages on AUR to help with installing ROS, but no cohesive guide or anything. The instructions on the website seems to be consistently outdated. Have you had much luck?
Edit: I am currently working on getting it to work by fusing the instructions from these two pages:
http://wiki.ros.org/groovy/Installation/Arch
http://wiki.ros.org/hydro/Installation/Source
Last edited by vlsd (2013-11-18 23:23:59)

Agent Inbox Quick Search with Custom Parameter

Hi,
In the Agent Inbox Advanced Search I added Created By as a searchable parameter. We'd now like to create a Quick Search for Created By - Me.
I see that we use view CRMV_AUI_QUICKS to define quick searches and that this view is based on the table CRMC_AUI_QUICKS. Obviously the field (Created By) that I added to the Search Object (BTQueryAUI) is not included in that table.
So, I suppose that I can append the new field (Created By) to table CRMC_AUI_QUICKS; but then won't I have to regenerate the Table Maintenance View so that the new field will be included in the maintenance screen? Won't this be considered a repair since the view is in the SAP namespace?
Will this even work?
Is there any other way to include custom search fields in Quick Searches? I guess I could code a solution in ICCMP_INBOX/AdvQuicksearchV but I'd rather not have to code quick searches every time a new field is added to the searchable parameters.
Thanks for your time,
P.

Anyone have any insight in to this?
Thanks,
P.

Set arch forums or wiki in opera's keyword quick search?

Hey just wondering if this is at all possible. I don't really know much about html or search engine protocols, but I think it would be really cool if someone knew how to set up custom searches in opera's keyword searches. This is what I am thinking of if anyone knows how:
type f ---> searches bbs.archlinux.org forum search
type w ---> searches wiki.archlinux.org wiki search
It would be awesome if anyone knows how to do this since I do so many forum searches it would be nice to just pop opera open and quickly search.

In Konqueror, this works as the search function:
http://bbs.archlinux.org/search.php?action=search&keywords=\{@}&author=&forum=-1&search_in=all&sort_by=0&sort_dir=DESC&show_as=topics&search=Submit
Where \{@} is the search word. So in the 'Web Shortcuts' menu I have a shortcut named 'arch' under the title 'Arch Linux'. If I go to the address bar and type:
arch: test
It will search for 'test' with all the default search settings. It seems like this should be pretty easy to translate to Opera.
Last edited by skottish (2007-05-03 01:45:09)

Firefox 5 Searching for images on the web is much slower than opera and my previous Firefox version. Can I turn off the useless zoom thing when I hover over an image for a few seconds?

OK, what I want to do is search for images with Google or similar search engine. This was fine in my previous FF version. The images just loaded as thumbnails, all the same size and I had to click on one to open it in a new tab or whatever I wanted to do. Now the images load all different sizes and if I hover for a moment over on, it zooms in a bit and gives me some image details. This slows image searching to the point of being very frustrating. I thought this might be a Google things, so tried other search engines. Tried switching Javascript off to speed things up, just blank grey rectangles displayed. Tried Opera and it loads basic images like Firefox used to, FAST...

The speed of image searching isn't a problem for me. The trouble is, the automatic zoom function is lightning fast and I find it disturbing to the point that it makes me feel very ill.
I very much want a way of suppressing it.

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

I have Mac OS X Version 10.6.8 ,I want to buy the updated operating system that puts iMessage and Facetime on my Macbook Pro. What should I search for, and then purchase, in the App Store?

FaceTime can run in the version of OS X that you currently have. To get Messageyou need Mountain Lion. The protocol used by Messages is iMeassage.
The question is does your MBP meet the specs for Mountain Lion.
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory
8 GB or more of available space

Between operator not appearing for date in custom field of IBASE search

Hi experts
I am using CRMCMP_IBSEARCH for search enhacement of IBASE by adding a new fields as valid from date in CRM 7.0.
I have added the field using append structure in the search structure of IBASE.Now my requirement is i am unable to see the between operator in UI for this date field and also i cannot enter date range for my requirement.
Any su

Hi,
please go to SM34 and open viewcluster CRMVC_DQ
Check and change here the operators for your component and view / attribute.
Kind regards
Manfred

HT4623 I do not like the new iOS 7 operating system on my iPad. I do not like the Safari works, I do not see a way to enter or search for a new web site. Is there a way that I can go back to the older operating system?

I do not like the new iOS 7 system on both my iPad 2 and iPhone 4S. I can not like the way Safari works, I can not see a way to enter name to search for new web sites. Is there a way I can go back to the old iOS 6.1.5 operating system on my devices? Thank you.

I can not see a way to enter name to search for new web sites
Put your search terms in the combined URL and search bar at the top of the browser (exactly the same as you do in most modern desktop browsers such as Chrome, Safari, Explorer). There is no separate search box, just use the box where you enter web addresses.
And no, you cannot downgrade.

How can you search for outlook email folders quickly?

I am connected to my work outlook email system and within outlook I have circa 500+ folders. From the iPhone you can see all the folders in the email account but the list is (a). expanded {which makes the list huge} and (b). there appears to be no facility to search for a folder.
Normally in other areas of the iphone OS, obviously you pull down (rather than pushing up) and you are shown the search box.
This appears to have been missed in this area of the OS so all you have is your finger to scroll through the list - I am sure that I am not the only one who has found this problem as it is very difficult to use the iphone without a search facility or at least not expanding all the folders.
It takes me 5-10 minutes to find a folder for example...
Regards,

On your desktop, go to the store and click on the movies tab --> (Great Movies, Great Prices)

I am trying to remove Conduit from my G5 running 10.5.8 It has kidnapped my homepage in Tenfourfox 17.0.7 I have searched for a solution an nothing seems to work. It is necessary for me to change the operating system to get rid of this?

I have searched for the following file and could only find one of them which I deleted. So far Safari does not seem to be effected.
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
I also tried getting rid of all versions of TenFourFox and nothing has helped.

That toolbar/ct plugin seems to cause problems for all who install it!
If you are running Tiger or Leopard:
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
If you are running Lion:
From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
~/Library/Application Support/Conduit
Delete the second item if it is there.
Now select Go to Folder again and enter /Library
From the folder that opens, delete the following items if they are there (you may need your login password):
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Searching for contacts quickly... What a pain!

Don't get me wrong... I love the whole touch pad thing.
Its so easy to browse for contacts entered.
However, when you sync to corporate exchange environment and get over 3000 contacts its becomes a pain to search for a number when you are trying to dial.
Unlike Blackberry, I hope apple is able to implement afeature that you can start entering (typing) a name and it narrows your search based on the letter you type.
That is unless its already there and i can't find it.
Any takers?

That's not what this thread is asking about. The letters on the side are helpful ONLY if you know the "sort-by" name of the person you are looking for. If you're sorting by last name, but only know their first name, the "starts with letter" list is unhelpful.
As I posted in another thread:
Right now, I've sorted my Phone contacts by last name. Suppose I want to call "Michael" but I don't know his last name. In Mac OS X (along with the really good smartphones), I would typically be able to enter his first name and have all the Micahels in my contacts list show up. Not only that, I'd also get search results for anyone who worked for a company called "Michael", or even someone who had "Michael" in their notes field (perhaps I'm looking for "Michael's Secretary"?)
I suggest that everyone go to http://www.apple.com/feedback/iphone.html and submit a request for CONTACT SEARCH in the phone app!
If you notice the letters on the right, just tap the
letter of the contact name and it takes you to that
letter...

Searching for a good book about [Arch Linux]

Hello friends,
I'm here stuck with Windows 8, making a couple of tests about installing Arch Linux in VMware Workstation, if it succeeds, I'll move to Arch completely. My question is: Is there a good book about Arch (installation, maintenance, best practices, security, and so on)? I tried "Arch Linux Environment set-up How-To", but unfortunately, it wasn't what I expected.
I'm a little confused about UEFI + GRUB2 + GPT/MBR but I think I'll dominate it soon...
My system:
[PROCESSOR] >> Intel® Core™ i7-3840QM (8M Cache, up to 3.80 GHz)
[GRAPHICS] >> Dual Nvidia GeForce GTX 680M GPU With 4GB GDDR5 Video Memory (SLi)
[RAM] >> 16GB DDR3 SDRAM 1600MHz
[SSD] >> OCZ Vertex 4 (256GB)
[HDD] >> Seagate Momentus XT Hybrid (750GB)
I wonder in how many seconds the system will boot up...

@op As others have mentioned, do not seek out knowledge from a book. There has been quite a few shifts in Archlinux, specifically to uefi and systemd. There are a few starters for your concern.
https://wiki.archlinux.org/index.php/Un … _Interface
https://wiki.archlinux.org/index.php/UEFI_Bootloaders
https://wiki.archlinux.org/index.php/Beginners'_Guide/Installation
Other then that, there is the forums and a quick search will land you on a goldmine of knowledge. Great idea to start it up in a vmware, although it will not require the uefi boot, but it will still get you a bit more familiar with the install process and iron out some basic questions. Good luck!

How to "quick search" in a sorted list ?

Hi all,
I need that your advice to choose the best collection to modelize my data.
Let me describe you the context of my problem:
I work on an antenna pattern file which looks like this:
Elevation (deg);Gain (dB)
0;5
3;45
6;3.1
10;6.5
16;18.1
20;33.1
24;31.2
30;3.5 I need, for a given elevation angle, to get the related gain. if the exact value of the angle is not found, we will return the gain of the nearest angle.
For example:
If the elevation angle is 5 degrees, I must return 3.1 dB.This operation should be called a big number of time (about many hundred calls)
What are your advices to modelize my data ? What is the best collection to do it ? What is the best way to quick search in this data to get the gain realted to a given angle ?
I though to use the binary search tree. What do you think about this solution ? Do you known of the Java API contains an implementation of the binary search trees ?
I though too to use an hashset. The hashcode should be computed in order to access to the nearest angle in the list of values. But I did not find the alogrithm to compute a such hash code. Maybe it is a wrong way.
Please, help me.
Tell me your opinion and your advices to solve my problem.
Let me know if you need more information
Thanks

OK, it works.
I created a class for my data:public class ElGainPatternElement
private double elevation;
private double gain;
+getters/setters
}Then, I created a comparator to compare my elements on the elevation attribute.
Finally, I specialiazed the Collections.binarySearch method in order to return the value instead of the index.
I the object is not found, I return the inferior (or superior) object.
public static <T> T binarySearch(List<? extends T> list, T key,
      Comparator<? super T> c, boolean isMinStrategy)
    int index = Collections.binarySearch(list, key, c);
    // si objet non trouv�
    if (index < 0)
      // r�cup�rer l'index le plus proche de celui recherch�
      index = isMinStrategy ? (-index - 2) : (-index - 1);
      // si plus grand que tous les �lts, retourner le dernier de la liste
      if (index >= list.size())
        index = list.size() - 1;
      // si plus grand que tous les �lts, retourner le premier de la liste
      else if (index < 0)
        index = 0;
    // retourner l'objet le plus proche au regard de la strat�gie
    return list.get(index);
}It works very well.
But now, I need to change the strategy to use if the wanted elevation is not in the list.
If you look at the example of my first post, the 5 degrees of elevation is not in my list. So, I have to interpolate the values of the gain in order to get a correct gain.
If possible, it should use the least squares interpolation (I'm not sure of my traduction of "moindres carr�s").
I have really no idea of the way to do it.
Can anyone help me with this interpolation ? I have never use algorithm of interpolation (except the mean of 2 values).
Maybe the Java API provides some utilities that can help me to interpolate my values ... any suggestions ?
Thanks

Opera quick search for archlinux

Similar Messages

Maybe you are looking for