Operating and Country COA

Hi,
We have a few entities across different countries.
Currently, all the countries use the same operating COA.
For China, in addition to the operating COA, they have their own country COA which is mapped in the "alternative account no" field in GL master.
Let's say that we have 1 operating COA GL account e.g. FA - Hardware but in the country COA, they are supposed to be at more detailed level e.g. FA - Hardware (network), FA - Hardware (non-network).
Since there is only a 1 to 1 mapping, what can we do to achieve what we need other than creating more accounts in the operating COA?
Any ideas are welcomed.
Thanks.

Hi
With out creating a gl in operating chart of a/c we cont create country chart as gl.
create gl in operating then it assign gl code of country in fs00.
clear
Regards
prakash

Similar Messages

  • Chart of Account and Country COA

    Hi All,
    Can some tell me difference between Chart of Accounts and Country Chart of Accounts. And for What purpose Country Chart of Accounts is used.
    Regards,
    Kiran.

    Hi,
    Chart of Accounts
    Definition
    This is a list of all G/L accounts used by one or several company codes.
    For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a company code.
    Use
    You have to assign a chart of accounts to each company code. This chart of accounts is the operating chart of accounts and is used for the daily postings in this company code.
    You have the following options when using multiple company codes:
    You can use the same chart of accounts for all company codes
    If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
    In addition to the operating chart of accounts, you can use two additional charts of accounts
    If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
    The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the company codes which use different charts of accounts together or separately.
    Structure
    Charts of accounts can have three different functions in the system:
    Operating chart of accounts
    The operating chart of accounts contains the G/L accounts that you use for posting in your company code during daily activities. Financial Accounting and Controlling both use this chart of accounts.
    You have to assign an operating chart of accounts to a company code.
    Group chart of accounts
    The group chart of accounts contains the G/L accounts that are used by the entire corporate group. This allows the company to provide reports for the entire corporate group.
    The assigning of an corporate group chart of accounts to a company code is optional.
    Country-specific chart of accounts
    The country-specific chart of accounts contains the G/L accounts needed to meet the country's legal requirements. This allows you to provide statements for the country's legal requirements.
    The assigning of an country-specific chart of accounts to a company code is optional.
    Integration
    The operating chart of accounts is shared by Financial Accounting as well as Controlling. The accounts in a chart of accounts can be both expense or revenue accounts in Financial Accounting and cost or revenue elements in cost/revenue accounting. You can find additional information on this subject under Cost Accounting and Chart of Accounts.
    Thanks,
    Rau

  • Group and country specific acc in operating coa

    hi,
    the same chart of account is shared among countries in the same region. there are 3 kind of gl account, example for sales account : 50000000-51999999, I50000000-I51999999 and L50000000-L51999999. they in the same coa but different acc group.
    also no assignment done in ob13 and ob62.
    i will assume I for group and L for local but both of them not in group coa and country specific coa but in the operating coa.
    1) may i know what is the difference for this as compared to account sitting in individual coa (group and country specific)
    2) what benefit of this kind of coa design as compared to different coa ( group and country specific)
    3) as all are sitting in operating coa, if i want to post to, say, L50001000, if different coa, then i will post to 50001000 then in the assignment will have the corresponding L50001000 account. this L50001000 will be posted automatically.
    but now all are sitting in the same coa, does it mean we need to define in the transaction explicitly when doing the posting? 
    thanks

    > hi,
    >
    > the same chart of account is shared among countries
    > in the same region. there are 3 kind of gl account,
    > example for sales account : 50000000-51999999,
    > I50000000-I51999999 and L50000000-L51999999. they in
    > the same coa but different acc group.
    > also no assignment done in ob13 and ob62.
    > i will assume I for group and L for local but both of
    > them not in group coa and country specific coa but in
    > the operating coa.
    > <b>Yes. Your assumption is right. Account numbers with prefix of I and L will be used exclusively GAAP related postings.</b>> 1)
    may i know what is the difference for this as
    > compared to account sitting in individual coa (group
    > and country specific)
    > 2) what benefit of this kind of coa design as
    > compared to different coa ( group and country
    > specific) <b>Reporting will be simpler and easier and less of maintenance issue</b>.
    > 3) as all are sitting in operating coa, if i want to
    > post to, say, L50001000, if different coa, then i
    > will post to 50001000 then in the assignment will
    > have the corresponding L50001000 account. this
    > L50001000 will be posted automatically.
    > but now all are sitting in the same coa, does it mean
    > we need to define in the transaction explicitly when
    > doing the posting? <b> Yes</b>
    > thanks

  • How to integrate operating charts of account to country and group coa

    Hi Sap gurus,
    How to integrate operating chart of account to country and group chart of account
    Regards,
    Rajesh

    First create the country chart in OB13 and assign the same to OB62.
    Then for each operational chart of account, enter the country chart of account in FS00 and this will be captured in field Alternate account number.
    The relationship between operational to country chart of a/c is 1:1.

  • HT4993 i did a master reset on my iphone 4. now when i try to set the phone back up from the start i put in the language and country, I hit next and it takes me to a screen that says connect to itunes, then will not me go any further, what do i do?

    i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help

    Connect it to your computer via the supplied sync cable and restore.

  • Swf link not working in Firefox, Opera and Internet Explorer but works in Safari

    Hi,
    I'm sorry but Im a real newbie and really need help!!!
    On the homepage of my website I have put a swf file that I linked to another page in my website through the div a href link and it displays great on safari and links, however in other browsers, when i try to click on it, it comes up with the link at the bottom of the browser (where it sometimes says Done), however it doesnt actually link, it jsut stays on the homepage.
    Here is the coding i put in:
    <div id="products2">
              <p>
              <a href="Our_brands/index.html">
                <script type="text/javascript">
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','449','height','449','title','Products','src','Productions/boxes3','quality','high','p luginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwav eFlash','movie','Productions/boxes3' ); //end AC code
              </script>
                <noscript>
                <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="449" height="449" title="Products">
                  <param name="movie" value="Our_brands/boxesnew.swf" />
                  <param name="quality" value="high" /><param name="SCALE" value="noborder" />
                  <param name="allowScriptAccess" value="always"/>
                  <embed src="Our_brands/boxesnew.swf" width="449" height="449" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" allowScriptAccess="always" scale="noborder"></embed>
                  <br />
                  <br />
                </object>
                </noscript>
              </a>
              </p>
            </div>
    Could someone please tell me where I am going wrong?
    I would REALLY appreciate it.
    Thank you in advance!!

    I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
    Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
    So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
    Does that make any sense?
    Sorry if it doesn't.
    Thanks for the quick reply as well!!!

  • My web site has a link which automatically configures an email. Doesn't work in Firefox 5.0 but OK in IE 8, Opera and Netscape. v

    My web site is generated by Second Site , author John Cardinal, and contains email links which when selected automatically createsan email which all you need to do is fill in the body and send it. This has worked in the past in Firefox and does work now using IE 8, Opera, and Netscape browsers but does not work when using my Firefox browser neither locally on my computer or in my Internet website. Firefox is my browser of choice. This has worked in the past using Firefox.
    My web site is www.schulteis.com/omnibus/. On the presentation page, on the bottom, where it identifies Genealogist: Site Administrator. Select it and it may work for you. John Cardinal tested it on his local machine and it worked for him. His response to me was,
    "It's very likely that this is some sort of browser configuration error, and it's probably related to using a web-based email client, In
    Firefox, look under Options > Applications and see how the "Mailto" Content type is configured. It should probably say "Use Yahoo Mail" [it does]. I have never configured a browser to use a web-base email client, so I can't help more than that.
    Since this works fine on my computer and on my Internet site when using browsers IE 8, Opera, and Netscape but not Firefox, and I didn't do anything special for any browser to cause it to work, don't know what I could have done wrong for Firefox.
    I am using Yahoo mail.
    Thanks for your help
    Donald
    [email protected]

    I'm also running FF 36.0.4 on a Win 7 machine.  Here is what I see when I "open" the map (from the server - not inside DW):
    The map area stays white with no image even after several minutes.  The cursor does change to a hand when over the area where the map should be and if I click and drag there the cursor switches to the closed hand - so it's acting like the map is there and can be moved - but just no map shows up.
    I'll run it though the validator.  Thanks!

  • How do I add State/Province and Country to my drop down list?

    How do I add State/Province and Country to my drop down list?

    Hi Gen,
    My problem is that I'm working with the free version of Form Central - I'm willing to purchase a version.  Earlier in my form I have States as a drop down menu (see below) but can't copy it to make it appear later in the same document. I was trying to avoid recreating the entire form. Any tips on copying or duplicating a field inside a document.
    Best Regards,
    Gina Grant
    ink + thread
    312.970.1106 (p)
    773.435.6474 (f)
    www.inknthread.com
    CPS Vendor #: 98626
    The information contained in this email is confidential, proprietary and may be legally privileged. This email is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, dissemination, or reproduction is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact ink + thread by e-mail ([email protected]) and destroy all copies of this email.

  • HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.

  • Since I updated Firefox I have to constantly re log-in to my Yahoo account such as email. Every time I leave the page I have to log-in to get back into it. I also run OPERA and I do not have that problem with them. I stay logged in. Any suggestions?

    I have windows Vista and have the updated version of Firefox. I also can run OPERA and LUNASCAPE with no problems. When running Firefox I have to constant re log-in to my Yahoo account every time I leave the page. For example: I log in to check my email on Yahoo and then leave my email page. Then when I return to recheck my email I have to log in all over again. I can't stay logged in. If I run my OPERA browser I stay logged in for days without having to sign in all over again.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    "Remove Cookies" from sites causing problems:
    Tools > Options > Privacy > Cookies: "Show Cookies"
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have. How to bypass this?

    I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have since i did not enter any password when i did the back up. Is there any way I can bypass this password request? Otherwise i have lost all my contacts etc.
    Greatful for help.

    Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
    Have you failed to use the device as designed?

  • Unable to retrieve the operations and entities during service introspection

    Hi,
                      I created one sample flex mobile project using flash builder 4.5, i would like to invoke the web service (wsdl file), which is developed in java and hosted in remote machine server.i want to call a one getEmployeeList method from the webservice.
                          In flash builder i used the menu Data->connect to web service , i gave the url, changed the service name and package name, after that i clicked next button,
    the service introspection dialog appears and after a few seconds, flash builder 4.5 shows the message "Unable to retrieve the operations and entities from the web service" and "There was an error during service interospection".
                       I try to open the url in the browser window i could able to see the wsdl file.so, please help me to solve this issue!
    Thanks & Regards,
    siva
    Message was edited by: siva csc

    same problem also on my xampp installation , it worked perfect with REST service in the previous flex 3 release , is it my apache conf or something related on Flash builder
    this happens when I call my function that connect to mysql do the query and returns the array object
    Err log from Flash Builder 4:
    There was an error during service introspection.
    <br /><b>Warning</b>:  require_once(Zend/Loader/Autoloader.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in <b>C:\xampp\htdocs\MYAPP\bin-debug\gateway.php</b> on line <b>23</b><br /><br /><b>Fatal error</b>:  require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\xampp\php\pear\;C:/xampp/htdocs/ZendFramework/library') in <b>C:\xampp\htdocs\MYAPP\bin-debug\gateway.php</b> on line <b>23</b><br />
    thanks in advance
    P

  • Approximate operator and recursive call function in abap

    Dear expert,
    Please give me an example about Approximate operator and recursive call function in abap
    thanks so much

    Hi
    About Approximate operator, you can go to tcode 'ABAPDOCU', searching CO,CN,CA etc...each of them have example there.
    And recursive function,
    Say here is a FM,
    FUNCTION recursive_get_number.
    *import im_num type i.
    *export ex_num type i.
    ex_num = im_num + 1.
    IF ex_num GE 100.
       EXIT.
    ELSE.
       CALL FUNCTION recursive_get_number
            EXPORTING
               im_num = ex_num
            IMPORTING
               ex_num = ex_num.
    ENDIF.
    ENDFUNCTION.
    When you call this function from outside with importing parameter '1',  then will return you 100.
    regards,
    Archer.

  • Iw72 service order + Link b/w operations and PRTs

    Hello Friends,
    So here is my problem. In transctin iw72 ( service order ) there is a tab called "operations". In tab operatinos I can attatch Resourse / tool ( table AFFH ( PRT assignment data for the work order )  and structure AFFHD (Structure of the PRTs in orders). So I can do this all manually, and after pressing save, the PRTs is attatched to the operation. ( pls note I want to attatch a documet as PRTs to the operations)
    Now I want to do this via any FM or BAPI, but unfortunatelly I was not able to find any such bapi, ( I mean, I have find bapi to create the operation, and I also find the bapi to create the document, and now I have to find the bapi which store the PRTs ( in my case document ) to that operation ( or order ).
    In table AFFH, I have reference to the order, but not to the operation, so actually using this table I can attatch the PRTs to one order, but my req is to attatch to the operation.
    So I debug the standard code, to find out how they are doing, but could not find much, any tip how I can make it more simple to find out, what is going on in starndard code.
    Regards,
    Message was edited by:
            Shah H
    Message was edited by:
            Shah H

    hi,
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/frameset.htm
    For debugging tutorial:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
    http://www.sapdevelopment.co.uk/tips/debug/debughome.htm
    http://www.sap-basis-abap.com/sapab002.htm
    System Debugging
    If you set this option, the Debugger is also activated for system programs
    (programs with status S in their program attributes). When you save breakpoints, the System Debugging setting is also saved.
    Update Debugging
    Update function modules do not run in the same user session as the program that is currently running in the ABAP Debugger.
    These function modules are therefore not included in debugging.
    Only if you select the Update Debugging option can you display and debug them after the COMMIT WORK.
    Normal Debugging
    Normal debugging is the one we do it by the normal dynamic break points or by /H or by using stattic break points.
    You can switch to diffferent debuggin modes while processing.
    Regards
    Reshma

  • To get the company code and country grouping attached to a position

    Hi everyone,
    I have a position and I need to get the company code and the country grouping that this position is attached to. Could you kindly suggest an FM or a class which would fetch the above data keeping in mind the inheritance tree. That is, if the company code is not maintained in HRP1008, then it should look for the same in the Org Unit that this position belongs to and so on..
    Any help will be greatly appreciated.
    Regards,
    Alpana.

    Hi
    Check the A011 relationship of the position and get the cost center, from cost center you can get the company code and country grouping from Cost Center Master CSKS.
    ~~~Ganesh Kumar K.

Maybe you are looking for