Operating and Non-operating temperatures for iPhone 5s

For all iPhones it is mentioned as below -
Nonoperating temperature: −4° to 113° F (−20° to 45° C)
Operating ambient temperature: 32° to 95° F (0° to 35° C)
Above info is mis-leading.
So which is the temperature for optimal usage if all temperatures between −4° to 113° F are non-operating?

Srikant Chakravorty wrote:
For all iPhones it is mentioned as below -
Nonoperating temperature: −4° to 113° F (−20° to 45° C)
Operating ambient temperature: 32° to 95° F (0° to 35° C)
Above info is mis-leading.
No, it's not mis-leading. It is a standard way of marking product temp ranges.
It can safely be stored (non-operating) in temps of −4° to 113° F (−20° to 45° C)
If it is hotter or colder than this, it may get damaged.
It will operate correctly in temps of 32° to 95° F (0° to 35° C).
Hotter or colder than this and it may not operate.

Similar Messages

HT2101 What's the lowest operating temperature for iPhone 4S?

My phone turned off by itself & couldn't turned it On while I was out for trekking & temperature was -40 oC. I use a leather casing for my iPhone. I was out of contact with my family during that time. Surprisingly when I turned it On upon reaching home it still showed 40% charged status. What's the lowest operating temperature for iPhone 4S?

A Google search is your friend. This was the first hit with a search for "iPhone 4S specs".
http://www.apple.com/lae/iphone-4s/specs/
Operating temperature: 32° to 95° F (0° to 35° C)
Nonoperating temperature: -4° to 113° F (-20° to 45° C)
Relative humidity: 5% to 95% noncondensing
Maximum operating altitude: 10,000 feet (3000 m)

Branch operation and return operation for routing in alternative sequence

Hi all experts.
I would like to ask which table and field store the value of branch operation and return operation for routing in the alternative sequence. I can only find them in structure (PLFLD-VORNR1 and PLFLD-VORNR2) but I want the table field of them. Would anyone please suggest a solution? Thank you.

Hi,
look in table AFFL, here the BKNT1 and BKNT2 refer to those vornr1 and vornr2 of the operation. For example in user-exit ZXCO1U01 you will find the values (BKNT1/2) in the sequence table, and when, for example, filling the LOIPRO01-Idoc, you can use the found VORNR for the E1AFFLL-segment.
See coding for example on determining VORNR1/2 (sequence_table/operation_table as in user exit EXIT_SAPLCOBT_001):
SORT operation_table BY vornr.
LOOP AT sequence_table INTO l_sequence.
    MOVE-CORRESPONDING l_sequence TO l_affl.
* Read the operation table to determine the vornr1 and vornr2
*via the value of field BKNT1/2
    IF NOT l_sequence-bknt1 IS INITIAL.
      READ TABLE operation_table INTO l_operation
      WITH KEY aufpl = l_sequence-aufpl
               aplzl = l_sequence-bknt1.
      IF sy-subrc = 0.
        l_affl-vornr1 = l_operation-vornr.
      ENDIF.
    ENDIF.
    IF NOT l_sequence-bknt2 IS INITIAL.
      READ TABLE operation_table INTO l_operation
      WITH KEY aufpl = l_sequence-aufpl
               aplzl = l_sequence-bknt2.
      IF sy-subrc = 0.
        l_affl-vornr2 = l_operation-vornr.
      ENDIF.
    ENDIF.
Cheers,
S.

Routing number of operations and reference operation in the order

Hi experts,
If anyone knows about Routing number of operations and reference operation in Maintenance order , please explain.
is it used for maintenance order? if yes, please mention the path from which I can see or note the number generated by the system as Routing number of operations or operation task list no. or reference operation
Regards,

Hello,
Routing number of operations in the order"(field-->AUFPL) of the order at table AFKO, using order number. Find the Operation counter number of the operation at table AFVC using "Routing number of operations in the order".
From above we can fetch the Operation Level data of Order by using the Routing number of operations in the order"(field>AUFPL) .Routing number of operations in the order>which solely identity of the Operation for your order after creation of order it is created this number.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 23, 2010 2:47 PM

Operation and Sub operation link in routing -reg

Hi,
In one of our report development we have to seggregate the operation number wise suboperations
which table and fields we have to use ?
we have to down load all the operations and sub operations for a given routing from the system and should be able to display for this operation these are all the sub operations and display their operation timings
please guide
regards,
Madhu Kiran

Hi,
If i go to some operation and add one sub operation for it , i am not getting in the tables both operation and sub operation
i think both are getting stored in the same field
can some one give some logic of fields connection to fetch the sub operatiosn of an operation ?
PLPH table has no entries at all in our system
i try to use PLPO and PLAS
i require basic logic of flow
how to get the suboperations of an operation
pl help
regards,
madhu kiran

1.     Defining dependencies between Work order operations and Isolation Operation Steps

Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand

Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand

Is there a car charger and fm frequency transmitter for iPhone with IOS6?

is there a car charger and fm frequency transmitter for iPhone with IOS6?

Here is something interesting about car chargers and the iPhone 3G:
From Macworld:
On to the power adapters. Here’s the story: We learned a while back that iPhone 3G doesn’t support charging “via FireWire.” The thing is, there are lots of devices out there that don’t actually have a FireWire port, but are technically FireWire chargers because they’re sending power on the dock-connector pins that were used for power by the FireWire interface. There are a lot of reasons for this, chief among them the fact that the FireWire spec allows as much a 18 volts, while USB is a 5-volt connection. Since cars provide 12 volts of power, many if not most car-chargers used the FireWire method to send power.
However, in the interests of space and simplicity (i.e., not having to engineer for two separate power paths), Apple has dropped support for FireWire charging with the iPhone 3G. This means that many accessories won’t charge an iPhone 3G. Borchers said that Apple gave accessory developers a strong hint that this was going to happen a while ago, but he said that some companies have continued to implement FireWire-based chargers despite the warning.
But there’s some hope in sight: Borchers told me that at least a couple of third parties will be releasing converters that will pass through the dock connection, but convert the power to a USB standard. That adapter may make many of those charging devices come back to life

Please give me ios 6 for iphone 4 bcz ios 7 very slowly and have some wrong for iphone 4

please give me ios 6 for iphone 4 bcz ios 7 very slowly and have some wrong for iphone 4

We are users. Not Apple. If you want YOUR problem solved, YOU need to solve it.
Restore your phone as a NEW device.

I submitted my trade in and then placed order for iphone 6 - processed payment and everything - no email confirmation was sent and no order history on my acount - did it go through or not???

I submitted my trade in and then placed order for iphone 6 - processed payment and everything - no email confirmation was sent and no order history on my account - did it go through or not???

Seeyasoon,
I know this is something that I would be worrying about too, and I want to ease your mind. I've sent you a direct message and look forward to assisting you there.
SarahO_VZW
Follow us on Twitter @VZWSupport

Adobe Ideas Crashes and no Adobe Draw for Iphone...

Adobe Ideas Crashes and no Adobe Draw for Iphone...I just receive a email stating there will no longer be any support for Adobe Ideas which is fine if you have an alternative which would be Adobe Draw. Now problem number 1 Adobe Ideas is crashing so with that being said we can not use it even if we wanted to being that is the only vector app you offer for the iphone. Adobe is giving a deadline of November 21st. I think Adobe should at-least fix the issue before stating a deadline with adobe ideas or release us a version of Adobe Draw for the iphone this is very frustrating for a long time Adobe users of the apps and programs..you drop the ball on this one ADOBE. very disappointed.

Wish I could help offhand but I'm on Android (which doesn't have Ideas anymore). Ideas produces vector files, no? Someone at the App Store site mentioned you can open the files produced in Ideas in something like SketchBook Pro (which can, in turn, produce raster file formats like PNG, JPEG and PSD).

SCTL-NFC1 is a Near Field Communication(NFC)/Radio Frequency Identification(RFID) Reader and Payment Adaptor designed for iPhone/iPod Touch to provide NFC two-way communication,RFID read/write and contactless payment capabilities.

SCTL-NFC1 is a Near Field Communication(NFC)/Radio Frequency Identification(RFID) Reader and Payment Adaptor designed for iPhone/iPod Touch to provide NFC two-way communication,RFID read/write and contactless payment capabilities.
commercial applications such as asset tracking, document tracking, healthcare, security and access control.

We are the manufactuer of the reader

Group By Operator and statistics operation

Hi all,
in my model from the data service I obtain these fields
sold_to (T)
delivery_date (D)
quantity (N)
zdiff_date (N)
zindex (N)
I have to present a table where I have a row for each SOLD_TO and in the columns I'd like to show the average values.
So the situation should be:
sold_to | quantity (AVG) | zdiff_date (AVG) | zindex (AVG).
For this I use the Group by operator where on SOLD_TO field I apply the Group1 and for the others fields I use the average operation.
My problem .... I don't see the results..... all the average fields are empty but if I apply the sum (for instance) I obtain the right results.
Where is the problem? Have you ever seen or tested this kind of situation?
Regards, Roberto

Hi,
I applied your suggestion but doesn't work for the AVG. Only for the total (SUM).
I have these records in input:
SOLD_TO        | DELIVERY_DATE | QTY      | DIFF_DAYS   | INDEX
0000102004    | 02.01.2008           | 1500     | 7                    | 0,00467
0000102004    | 05.02.2008           | 1500     | 91                  | 0,06067
0000102004    | 05.29.2008           | 17,010 | 27                  | 0,00159
Group By Operator:
SOLD_TO (GROUP1)
DELIVERY_DATE (NONE)
QTY (AVG)
DIFF_DAYS (AVG)
INDEX (AVG OR STDDEV)
The results is
SOLD_TO        | QTY      | DIFF_DAYS   | INDEX
0000102004    |               |                       |
But if apply the following Sigma for the Group by operator
Group By Operator:
SOLD_TO (GROUP1)
DELIVERY_DATE (NONE)
QTY (SUM)
DIFF_DAYS (SUM)
INDEX (SUM)
The results is
SOLD_TO        | QTY      | DIFF_DAYS   | INDEX
0000102004    | 20,010 |      125           | 0,06693
Only with the total it seems to work.
Regards, Roberto

Mappings between table operator and joiner operator

HI all,
I am new to owb. I am trying to create a mapping in the OWB Mapping Editor where the scenario looks like :
table1 operator ---------> joiner file operator
i am looking at earlier mappings' sql code and found that there is a where clause condition that governing the above such scenario such as:
where table1.column value = "something" then load into joiner file operator.
But in the mapping editor, i cannot find any way to add this condition by clicking on the column name of table1. Please help.
thank you.

Hi
A joiner will make one output from 2 or more inputs. A joiner has a join condition which if you select the operator (not a group or an attribute with operator) the property inspector will have a join condition for detailing the 'where' clause.
If you want to filter a single input then use a filter operator. Again like condition the filter operator has a filter condition which if you select the operator (not a group or an attribute with operator) the property inspector will have a filter condition for detailing the 'where' clause.
Cheers
David

Point operations and Neighbourhood operations ???

Hi everyone, I am currently doing an assignment which is as follow
*1) Building a program to open a video stream and play it.*
*2) Perform the same 3 point and 3 neighbourhood operations on the video streams. Consider the object-oriented approach here.*
I don't understand how can I perform the Point and Neighbourhood operations on video. I have no idea about this. I looked on the Internet, but there are only the codes for point and neighbourhood operations for image, not for video. Would you please give me any idea about how to do this (as detailed as possible) ? And if you don't mind, would you please give me a sample code for these operations ? Thanks so much.
Also, I just wanna to know what is/are the differences between "+open a video stream+" and "+open a video+". I can write a code to open a video and add it to a frame or a panel, but I am not sure how it is different with the "+open a video stream+" ? Thank you very much for helping me.

This forum is for help with the JMF framework, not for having your homework explained to you.
If you have a specific question about how to implement some peice of your homework in JMF, then ask it here. If you have some other question about your homework, ask your professor.

Flash player and Win media player for iphone 3G?

There's any way to download an iphone 3G version of Flash player and Window media player. I am trying to hear a radio station on a web site but need those plugins to hear it. (www.lax.fm)
Please let me know.
Angel
Message was edited by: Mundy KalEl

No. You cannot download or install anything to iphone, unless it is offered in the App Store on itunes.
Adobe does not make a flash player for iphone.

Operating and Non-operating temperatures for iPhone 5s

Similar Messages

Maybe you are looking for