Operating System Image VS Operating System Installer - what does everyone recommend and which is quicker?

I have worked out that all of the configuration in our windows 7 image can be applied through the task sequence after the operating system is installed. Currently we apply and image and then add configuration.
I am wondering would I be better off just adding a Windows 7 installer instead of imaging? Which method would be quicker?
Would be interested to see how everyone does this.
One thing to consider is windows updates, as if we have an image (WIM file) we can inject updates to it through software update point on patch Tuesday to save having to apply them through the task sequence. We can't inject updates into the installer so time
taken to install 100 odd patches has to be taken into consideration.

The only reason to use an Installer post SP1 is for legacy OSes like XP or Server 2003 where no image actually exists on the media. Pre-SP1, there were issues with drive letters because of an on-going, back-and-forth mis-match of assumptions between the
Windows team and the ConfigMgr that required you to build an image from the actual installer. This was resolved in SP1 through the use of the OSDPreserveDriveLetter task sequence variable. There's a also a supportability issue when using an OS Installer --
I don't remember the details off hand though I know I wrote about them in the unleashed book if you are curious.
Thus, unless you are deploying XP or 2003, you should be using images only -- either image.wim directly (which you really should only use in a build and capture) or yur recaptured image.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

I am trying to download EndnoteX4 but keep getting the message 'no mountable file systems'. What does this mean and how do I fix it?

I am trying to download EndNoteX4 but keep getting the message 'no mountable file systems'. What does this mean and how do fix it?

jenitsallgood wrote:
I am really unsure as to what I am doing wrong.
Maybe you are doing nothing wrong and the problem is with the disk.
Use SuperDuper or CarbonCopy Cloner
to clone your system to an external drive.
Then boot from your DVD go to Disk Utility and choose your entire drive > top icon in DIsk Utility.
Go to Erase tab. Choose format: Mac OS Extended (Journaled). Click on erase. Now, install Lion and when you get to setup assistant choose to migrate from your external drive.
This is slightly different than baltwo described and slighly longer but if there is any corruption on your disk a more through way to go, IMO.
What baltwo is saying is to clone your volume over to an external hard drive with CCC reformat and clone it back. This will defragment the files and make them all contiguous but will not address any directory problems.
Your choice. You can do it one way, then the other if it doesn't work out for you.

Downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).

I am reinstalling Itunes on PC win 7 and have the message: "Apple mobile device failed to start verify that you have sufficient privileges to start system services" what does this mean and how do I check? I am already logged on as administrator.

I am re-installing itunes on a PC Win 7 and have the message: "apple mobile device failed to start verify that you have sufficient privilegesto start system services" what does this mean? how do I check and rectify? I am already logged onto the PC as administrator

I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?

What does everyone recommend for a multi-function machine

We have a small office but need high speed printing and more importantly high speed scanning. We currently have a xerox workcentre that have been decent but is in need of repair. Instead of spending the money on that it is time for a new machine. I would like to stay away from xerox as I called them to help fix current machine and the only advice they would give me over the phone was two power down the machine for 15 seconds. Obviously this did not work and then they wanted $275 for the the 1st 15 minutes for a tech to come out, ridiculous. Anyway, what do you guys recommend? I am looking to spend around $2,500.

Call your local office equiptment service and sales, they can recommend the best product for your circumstances as they have exposure to many different machines and problems.

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day

What does this mean and how do i fix it: "service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system."

What does this mean and how do i fix this so my ipod works again on my computer and itunes: "Service 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system services." I tried "retry", i tried "abort" and started over. I keep getting stuck in the same place.

Hello DEstadt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

I cant download itunes on my computer because it says " service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system services. what does this mean? how do you verify this?

I cant download itunes on my computer because it says " service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system services. what does this mean? how do you verify this?

I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?

HT203172 Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. When I repaired "disk permission", this message was what came up. What does this mean, and how can

Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired. When I repaired "disk permission", this message was what came up. What does this mean, and how can I fix it?
The opperating system I am using is 10.7.4, and updating to the latest version currently. Computer is running fine, except that when I did some utility repairs, I got the warning above, and not really sure what do, in regards to repairing it correctly, not just getting the message off of my computer.
Thank you for your help, and please only contribute if you know about this issue please.

That's a status message which can be safely ignored.
(70090)

Droid Razr I keep having a pop up of "Unfortunately system UI has stopped" what does this mean and how do I fix it?

I keep having a pop up of "Unfortunately system UI has stopped" what does this mean and how do I fix it?

Kelly,
That's a very strange message to get, but don't worry! We can help fix it. Lets check your software version to see which one you're running. Please check to see if there are any updates following these steps: http://vz.to/1qQxQq5
SarahO_VZW
Follow us on Twitter @VZWSupport

I downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone

i downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone?

You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to straighten it out.

TS3212 What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."

What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Images have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

I can't log in to my computer- when it turns on it has a white/gray screen with a flashing folder with a question mark in it. What does this mean and how can I get it to stop to log in?

Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?

Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph

After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

After downloading the updates for Premier Elements 12 I got the following error message U44M1P7. What does this mean and how can I correct it. Thanks.

glennpsychdoc
What computer operating system is your Premiere Elements 12 running on? I suspect Mac because of the name your error.
Please read the following Adobe document with the details and fix for error U44M1P7
ATR Premiere Elements Troubleshooting: PE12: 12.1 Update Released
Specifically open the following link in the above
Update 12.1 installation errors | Photoshop Elements, Premiere Elements
Please let us know if that works for you.
Thank you.
ATR

Operating System Image VS Operating System Installer - what does everyone recommend and which is quicker?

Similar Messages

Maybe you are looking for