Operating system not able to display some website or display with many lines. too sllow also.

I just have a new HP pavillon .but am not able to access some of the website I was using wiht windows 7.What will happen if I change it to windows 7. Do I am going to loose my garanty ?

I have a iMac and Macbook pro at work and at home also, all less than two years old, one two weeks old, and I have noticed the same behavior.  As in your case it has been going on for a couple of months or so. Depending on the download speed the page eventually loads and it never happens later in the evening or early in the am. Have a PC that has the same issue among others.  My ISP says it's a bottleneck problem that they have no control over.  Minor irritation, if yours is more than that it may be something else but I wouldn't try to fix something that might not be broken, give it some time my connection speeds have been better lately and haven't noticed it as much if at all.  

Similar Messages

  • Not able to access some websites

    I have not been able to access a few websites on my Macbook. I initially thought that it was my wireless router (D-Link DIR 655) and connected my Macbook to the cable modem but still I couldn't access the website. So I figured it must be my ISP. But then my roommate who has a Gateway notebook with
    Win XP was able to get onto that website. So it surely is not my ISP or my router. I am at a loss here and would really appreciate if someone could help me with this niggling problem. Thanks in advance.

    Some websites just don't work properly with Safari. I can always access the website's home page, but some links don't work. Sometimes a different browser fixes the problem (I use Camino), but sometimes the only answer is to re-boot in XP.
    I've always had intermittent problems with eBay - random "page not found" errors. My company car leasing site works until I try and sign in. My credit card supplier's site won't allow me to print a statement.
    Seems to be sloppy programming by the site designers. They don't care that they are alienating a small percentage of potential customers.

  • Firefox is not abling to open some websites which are noi encrypted.

    while opening some websites like- www.ssc.nic.in , firefox is not abling to open the full content of the website and instead it opens only the "html" view of such websites. When I check out the details from the "view page info" , the info only gives some details like- This website does not supply ownership information. and Connection not encrypted.
    I am not abling to find any settings so that I can change to be able to open the full contents of such websites and not only the html content view.
    So, please suggest me something so that I can open the full content of such websites.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • HP DV6700 Operating System Not Found- How Can I Access & Back Up Files?

    1. HP Pavillon DV6700 -> old yes, I know
    2. Operating System: Vista
    3. Black Screen -> Err2Err3 Operating System Not Found
    I ran the Primary Hard Drive Self Test > Hard Disk Self Test and it was a quick test. After it finished it came back with "#10009- Replace Hard Disk"
    My question is: I've been tring to make this laptop last for as long as possible (obviously considering I was still using Vista). I plan to trash this laptop, but I need to know somehow, some way to access my files. There are pictures and essays that I absolutely need and I didn't do any back up in the last 2 months.
    Please any suggestions!

    Yes use a usb to SATA adapter:
    http://www.amazon.com/Patuoxun-Converter-Adapter-C​able-Drive/dp/B008ASF5MC/ref=sr_1_3?ie=UTF8&qid=13​...
    That one is very inexpensive on amazon.com. Connect the SATA hard drive to the adapter (after removing the drive from the laptop) and plug the usb connectors into two usb ports on any other computer running XP or greater. The laptop drive will (if you are lucky) mount as a lettered drive on the host computer and you can copy and paste files off the drive with Windows Explorer file browser.

  • Operation System not found

    I've been following the beginners' guide and I keep running into this "Operation System not found" error.
    I'm using a dell xps l502x, and trying to install x86_64 arch. I've tried using syslinux and grub both with the same error on reboot
    During a syslinux install I use fdisk to partition the drive. The tutorial says this is to create an mbr, but it gives me a gpt from some reason:
    Disk /dev/sda: 120.0 GB, 120034123776 bytes, 234441648 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk label type: gpt **this I don't understand, as I'm following the guide for the mbr**
    # start end size type name
    1 2048 31459327 15G Linux filesystem
    2 31459328 234441614 96.8G Linux filesystem
    and my fstab is:
    # <file system> <dir> <type> <options> <dump> <pass>
    #/dev/sda1
    UUID=0ec7dc20-1ea3-4f1c-810b-4fded8550744 / ext4 rw,relatime,data=ordered 0 1
    #/dev/sda2
    UUID=9d6efd2f-8a18-4968-b251-7e09983ef539 /home ext4 rw,relatime,data=ordered 0 2
    So I have no errors at this point other then fdisk creating gpt instead of mbr.
    I install syslinux, no errors:
    Syslinux install successful
    attribute legacy bios bootable set - /dev/sda1
    installed MBR (usr/lib/syslinux/gptmbr.bin) to /dev/sda
    I edit the syslinux config to point to /dev/sda1.
    exit, umount /mnt/home, reboot, operation system not found!. The strange thing is when i go to the install disk and click Boot existing OS, I am able to find my install through syslinux and select Arch Linux, and it is functional.
    I'm not really sure where to go from here as I've tried both syslinux and grub with the same result. When using grub I make sure to create the 1007kb boot partition marking it as EF02, and i still get operation system not found.
    Last edited by soote (2013-08-31 20:36:12)

    WonderWoofy wrote:This sounds not like a problem with Arch or your bootloader installation at all.  Rather it sounds as though you need to make an adjustment to your bios to tell it to correctly try to boot the disk with syslinux on it.
    Thank you for the advice. I followed the steps listed here, and ran everything except for the last command (# syslinux-install_update -i -m). On reboot I was still faced with the Operation system not found error. I then ran # syslinux-install_update -i -m and got the following:
    Syslinux install successful
    ABORT! MBR installation to partition (/dev/mapper/arch_root-image)!
    I'm unsure of what this error means, but it lead me to this blog entry.
    This blog looks promising.
    roentgen wrote:
    Same Dell here. It seems to be a compatibility problem between BIOS and GPT.
    I couldn't find any other way than to use MBR.
    How do you create the partition table? In fdisk 'o' is used to create a DOS (MBR) partition table.
    I followed the beginners' guide to create it. I will try creating the partitions with o instead of p, i didn't know about that option. I really don't need a GPT partition.
    Last edited by soote (2013-08-31 21:07:22)

  • I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

    I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
    Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
    This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
    The battery life is also shocking!!
    I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
    I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
    I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

    but you should have a backup in itunes.
    Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
    And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
    But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app!   Good Luck!

  • HP Pavilion dv6500 Entertainment Notebook PC series Operating system not found

    Hello to all how are you doing guys doing today I'm having a problem and need the help from the tech world. So i have a Hp Pavilion dv6500 cto notebook. I started it up and got a black screen stating "Operating System Not Found". I couldnt get into safe mode to recover back to a safe point, i was able to get into the bios system to do a memory and Hard drive test, my memory test came back as a Pass but my Hard drive came back as a fail and stated "Replace Hard Drive".
    Now i went out bought a new WD 500GB 5400rpm hard drive for the laptop, i installed it and did a Hard Drive test to make sure it was good and the test came back as a Pass.  Now i had this laptop for years since 2007 and it broke just a few months ago, i just got the new hard drive yestarday and was playing doctor last night. When i got the laptop as a gift i was only given a recovery disk which did boot up and gave me the install now option and repair computer option. I chose the install now option and it was starting to install but then got this error message "Windows cannot open the required file D:\Sources\Install.wim. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070002." I read that you cant install windows from a recovery disk so now im back to square one. 
    So current status is I got a new hard drive that pass the bios test, memory test was a pass. I have no windows disk other then the windows vista recovery disk i tried but failed to install windows. I also tried a windows 7 disk from work but the disk wouldnt boot up came back with a message stating that disk couldnt be read there may be problem with the cd dvd drive or hard drive, but when i put in the windows vista recovery disk that boot up no problem. i just cant install window with it. So Im stuck with a black screen stating no operating system is not found. Note that i havent change the boot up line up back to hard drive to see if it would boot up the new hard drive but i dought it would change anything since its a brand new hard drive with nothing on it.
    If someone could help me with step by step like how to get an operating system on my new hard drive. My wife has a laptop but with no cd drive so i would need instruction to boot get it on the usb. Hope i was helpful with my problem.

    You have only tried questionable disks. You could order a recovery disk from HP but I am not even sure they still have Vista recovery disks. You could also buy a Windows 7 OEM disk and try that. it will cost you a bit but will be legal. What version of Vista is it? You can also try to find a Vista install disk and use the Key Code on the bottom of the laptop if it is still legible. Here is a link to downloadable .iso files you can use to make a Vista install disk that will activate with your Key Code:
    http://downloadsnfix.blogspot.com/2012/08/microsoft-windows-vista-official-iso.html

  • Not able to delete some of the pages in subpage

    Hi,
    I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
    the error that surprised me during the page deletion is
    Internal error (WWC-00006)
    Error while deleting page. (WWC-44130)
    Unexpected error - User-Defined Exception (WWC-35000)
    Unexpected error - User-Defined Exception (WWC-35000)
    Path ID does not exist. (WWC-50001)
    this is the same problem with some of the pages is the same page group but a different set of subpages.
    My portal version is 10.1.2.0.2 (Build: 150).
    it would be very nice of them if any one could give me a solution for this.
    Best Regards,
    Vijay.

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

  • Not able to access a website after Mountain Lion Update

    After I downloaded Mountain Lion to my computer I am not able to access a website I had bookmarked because it says the certificate is expired or something like that and the option to open it up or do anythingn to correct it is grayed out, does anyone know of a fix for this?  And it says it wont let me access it anymore for some reason.  Any help would be appreciated.

    I tried both of those and when it says this site is trying to access your computer there is an accept and a deny box and the accept box is grayed out and the deny box is the only one you can click on, is there anything else I can try?  Ive tried to get that certificate to be accepted always and entered it but it just wont let me click on the accept box, it is still grayed out, the only one I can click on is the deny box and clicking on it is the only way to get the whole box off of my screen.  Again, any help would be appreciated

  • Not able to produce some Czech characters in pdf using java.

    Hi All,
    I am not able to produce some Czech characters like ě and č in pdf using java. Can you please guide me what could be the cause. The characters are coded in properties file and its just neglecting č and ě and taking other character next to it.
    we have used below code to display the characters but its also not working..first we thought its font issue since Helvetica dont come by default in windows but after putting helvetica font also we are not able to produce the characters.
    BaseFont baseFont = BaseFont.createFont(BaseFont.HELVETICA, BaseFont.CP1250, false);
                   Font fontStyle = new Font(baseFont, 12, Font.NORMAL, Color.BLACK);

    baftos wrote:
    4th paragraph at http://download.oracle.com/javase/6/docs/api/java/util/Properties.html explains it.
    Note also that Java 6 allows you to produce properties files in encodings other than ISO-8859-1, provided you load them via a reader with a matching encoding. (Also see that link posted by baftos.) This might be more practical then the Unicode encoding which was required in earlier versions of Java.

  • All Browsers not able to open any Website while able to Ping all Websites but after restart server websites are able to open for 5 to 10 minutes only

    All Browsers not able to open any Website while able to Ping all Websites but after restart server web sites are able to open for 5 to 10 minutes only.
    Please Suggest me a solution.

    Hi, we miss some information;
    - do you use a proxy ?
    - can you provide an ipconfig /all please
    - do you use any firewall product that could block the computer on port 80
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • T43 operating system not found

    My laptop is thinkpad T43, recently the problem with Operating system not found happen, and the light for hard disk can not flash. But sometimes it will disappear, the laptop can start normally, who can tell me the exact reason??????
    Message Edited by evan_ares on 05-20-2008 07:17 AM

    Welcome to the forum!
    Posting the 7-character model number of the T43 in question would be a good start...
    Downloading and burning a PC-Doctor disk and booting from it would be the next step:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • T43-"Operating System not found" woes

    Hey all first time post long time listener, got a t43 thinkpad that will not boot and gets the message,
    PXE-E61 - Media test failure, check cable
    PXE-M0F - Exiting Broadcom
    Operating System not found
    First I checked BIOS and found that it was not recognizing hard drive, turned off broadcom, switched around startup hardware,etc etc and nothing still "operating system not found". Set everything to default, again same thing. Then I took out hard drive, and re inserted...again nothing. So I took apart laptop to look at connection on mother board, cleaned everything with dust-off, no visible problem on MB, took off CMOS battery, because I was in the neighborhood and figured it couldn't hurt,and reset CMOS info, put it all together and voila it starts up..midway through transferring files off, the hard drive (I assume) froze up and I had to do a hard reset. On the new boot, same problem as before.
    In the interest of price, I heard that the CMOS can drop below a certain voltage and screw with BIOS boot, (although there is no visible change in date/time and lenovo tech assured me it isn't the case),is this a possibility? Or is it a hard drive and/or MB issue? Hope you guys can help me out, thanks!

    Welcome to the forum!
    Posting the 7-character model number of the T43 in question would be a good start...
    Downloading and burning a PC-Doctor disk and booting from it would be the next step:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Operating system not found; clues in POST beep sequence?

    Hello, I have a Pavilion dv9000 (specifically dv9207us), BIOS version F.16, running on Windows Vista.   With no apparent cause it now stops booting up with the message "Operating system not found."  I can get into the BIOS setup but the "Primary Hard Disk Self Test" option shows "Diagnostics not supported".  I've also tried pressing F11 during bootup, as I found information that there could be a recovery function this would trigger, with no result.  The hard drive is a Western Digital Scorpio (WD1200BEVS). 
    I know the immediate answer is that the drive is fried, but of course am trying to make sure before giving up, and one unusual event that takes place on start-up, immediately after pressing the power button, is a series of five double beeps.  There's a lower-toned beep followed by a slightly shorter higher-toned one, and that repeats for a total of five -- sounds a little like an English police car, maybe.  If you listen very closely, the first, lower-toned beep actually may be two beeps followed by the higher pitched one; "da-da dee".  I expect there's information content in that, but have not been able to find any guide to POST beep sequences or the like.  Any guidance would be appreciated.
    Also, it apparently can access a thumb drive during start-up, as when I attached one I could see the thumb drive LED going active for several seconds, so I'm also wondering if I can load anything into the thumb drive that would help.  Naturally, this is the only computer in the house on Vista, however.  Thanks. 
    Message Edited by JimAC on 11-11-2009 02:05 PM

    Hello JimAC,
     I have now the exactly same issue in my dv9925nr. Did you found a solution?
    - Walter

Maybe you are looking for