Operating system problem after system recovery

i have PURCHASED HP-ENVY-M6-1125DX (IN-USA) IT CAME WITH - WINDOWS8 OS .(BOUGHT IN BEST BYE)
RECENTLY I UPGRADED TO WINDOWS8.1 PRO PREVIEW. SINCE THIS VERSION OF OS WAS ASKING THE ACTIVATION KEY,
I HAVE RECOVERED MY LAPTOP TO FACTORY SETTINGS BY USING RECOVERY PARTITION PRESENT IN MY HARDDISK.
BUT NOW THE OS IS WINDOES 8 BUILD9200, AND THIS OS IS ALSO ASKING FOR ACTIVATION KEY.
PLEASE HELP US IN SOLVING THIS PROBLEM.

Hello Mahantesh-uppin,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues reactivating your Windows 8 Product Key after a factory recovery. I would recommend that you review and follow the instructions in the HP Support document: Windows 8 Product Activation. This document will walk you through reactivating your Windows 8.
I hope I have answered your question to your satisfaction. Thank you for posting this issue on the HP Forums. Have a great weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

ODS/PSA Problems after System Copy

Hello All....i am a basis admin and am having problems with PSA after performing system copy. I have copied R/3 (source system) ans SCM (source system) and BW (3.5)systems from production into test environment in parrallel. I have performed all required BDLS steps on R/3, SCM, and BW as well as maintenance of RSLOGSYSDEST table. All profiles and ports (we20/we21) have been maintained as well. I have modified and tested all RFC connections and have used RSA1 to restore the source system connections and to activate and replicate. When activating ODS objects, the following error is generated...
There is no PSA for InfoSource 8ZFAP_O01 and souce system PB1CLNT510.
PB1CLNT510 references former production BW logical sys and correct logical sys should be QB1CLNT510. Apparently BDLS has missed a table or I have skipped a step in my post-clone process of BDLS and WE20/21. I am wondering if there is a re-initialization or logical system conversion step i have missed or is anything else i can do to resolve this issue.
Maximum points awarded for quick resolution.
Thanks in Advance
Chris
Basis

Hello Chris,
This InfoSource is related to a DataSource in which the source system is BW system itself (in your case: QB1CLNT510).
Try to first activate the DataSource 8ZFAP_O01 using the standard program (SE38): RS_TRANSTRU_ACTIVATE_ALL in which you should input the source system (QB1CLNT510) and the InfoSource 8ZFAP_O01. If you get a green light in the log that appears after the activation completes in which it says that all the structures have been activated, then all you need is to locate the DataSource in RSA15 and right click -> replicate.
If the log showed you that this DataSource doesn't exist, then you'll need to Activate the source system QB1CLNT510 again.
I hope this helps. Cheerz,
Ali

Exchange profile parameter problem after system copy of XI server

I'm getting problem after the system copy of XI server. Following is the details. pls help to fix this one:
XQA is the system copy of XDV server. XQA is installed on rx2n1v1 server and XDV is installed on dbcixdv server. Following is weblink of XQA and XDV.
XQA: http://rx2n1v1:57400
XDV: http://dbcixdv:57000
After the system copy of XQA, i changed all xdv related parameters (hostname/port) in visual admin and configtool of XQA server.
Now when i run sxmb_ifr tcode in XQA, it should open the link of XQA server ( http://rx2n1v1:57400). But it open the link of XDV server (http://dbcixdv:57000).
The cause of this problem is the xdv parameter entires (hostname/portnumber of xdv) in exchange profile of XQA server (http://rx2n1v1:57400/exchangeProfile).
Now if i change hostname/portnumber of xdv in XQA server (http://rx2n1v1:57400/exchangeProfile), it also make the same change in XDV server (http://dbcixdv:57000/exchangeProfile).
Both XQA and XDV are in differnet hardware server. I don't understand why making changes of exchangeprofile in XQA also changed the value of exchangeprofile in XDV.
Hope it clarify.
Pls give the solution of this problem.
Thanks
Amar

Arjun,
http://<SAPHOSTNAME>50000/exchangeProfile
Yes, I can use above, but changing connection information gives me
RFC call returned an error code: 399
Use this one
http://hostname:50000/webdynpro/dispatcher/sap.com/com.sap.xi.exprofui/XIProfileApp
This one, yes I get to the exchange give me an error: RFC call returned an error code: 399
http://hostname:50000/dir/start/index.jsp -->Administration -->login with PISUPER -->ExchangeProfile.
Internal Error
Internal error; contact your system administrator
Unable to read configuration data (ExchangeProfile/aii.properties)

SMSY - problem after system copy

Hi,
I have done a system copy of our solution manager system in order to test installation of EHP1, now EHP1 is installed without issues.
I need to reconfigure SMSY to only point to our Sandbox for testing, but for some reason it won't let me create the RFC's and no RFC's no info get updated.
When i try try to generate the RFC's it says "No client specified", but i cant populate the clients without reading the system data, when i try to read the system data i get "No read RFC destination found for system 'XXX'" (for obvious reasons.
Do i have to run Initial, Basic Setup? or is there any way i can just create the RFC's manually?....
Regards
Juan

Dear Juan,
you can enter clients manually. If you create a new system in the system landscape, then you should able to enter clients in SMSY in tab "Clients". If this is greyed out for some reason, then you can change the data source to "manual input". Click in the menu: Main Instance => Other object. Enter the sytem ID in "System" field, and select the push button "Set data source to Manual input". Then you should able to enter new clients for this system.
But I am not quite sure how the process is to reset it from Manual input back to automatic. Maybe SAP can add this.
Regards,
Holger

Elitebook 8530 sparekey problem after password recovery

Hi,
I'm a bit panicking - but will try to make this lucid.
I very much hope you guys can help..
It's the continuation of a problem I asked yesterday somewhere else.
http://forums.techguy.org/windows-vista/1133738-check-after-password-recovery.html
Basic system information:
EliteBook 8530; runs on Vista Business. More details about system in above thread
But for a short run-down:
- Yesterday my user-password was not accepted.
- Still had admin-access via fingerprints
- Ran Malbytes anti-malware and AVG anti-virus - neither found much of anything.
- Made new admin account, used that to reset my password.
- Posted the above-mentioned topic whether someone could check for malicious processes.
- Yesterday evening shut down the computer as normal
- This morning it mentioned that recently a password had been reset [with some location I didn't know. Had my name in it twice, so perhaps root-password or something?
- Only option was to click 'OK' and enter HP Sparekey.
- Currently I have the following message: Some users have not enrolled for HP SpareKey recovery. Do you want to enroll now? Answer-options: Yes; No; Do not show again.
I don't know the implications or effects of any of them - so haven't done anything yet.
Note: I don't think any of the accounts have HP SpareKey enrolled. I have never seen about it previously.
However, I got my laptop via an university-program, so the operating systems etc. had been preinstalled.
It might be possible they installed ShareKey for the initial account - but I think I would've heard of that.
So please someone help me - I really don't know what to do..
This question was solved.
View Solution.

Hey guys,
I don't want to hurry you or anything - but I could really need some advice here
Or should I be in a difference forum part; like http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/bd-p/bsc-274 or http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.VBnV4lJIg1g
because it's an issue with an EliteBook?
Or don't you guys really know this particular problem either - and therefore can't advice?..

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

Logical system names after system copy

Hi!
I installed a new SAP system via System Copy (SAPINST) approach.
As a consequence the old logical system names have been copied.
Question:
What is the appropriate approach (tcode, report) to change the logical system names of each clients of SAP system?
Thank you very much!
regards
Jürgen

Logical System Names
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
In BW, you make the settings for the logical system names in the BW Customizing Implementation Guide under Business Information Warehouse ® Connections to other Systems ® General Connection Settings. In the source system, you make the settings for the logical system in the Implementation Guide under Cross Application Components ® Distribution (ALE) ® Basic Settings.
Note SR047 lists names that cannot be given to BW systems, because they are reserved for internal use.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: .

Qosmio G30 - system problem after recovery procedure

I have Qosmio G30 - 148 which have Windows XP MCE, when trying to download some programs system crashed and make automatic restart.
I then used a RECOVERY CD to recover my all system and followed the instructions on the CD but when finished and rebooting the system a famous blue screen displayed tell me there's a problem in my system and windows must be restarted.
When reboot in safe mode there is a message tell me that the system is not fully installed. Please run setup again.
Could any body help me in that problem because it's a strange problem?
Note: I tried to install Windows XP from external CD but system did not know the hard disk.

Hi Ahmed
I would try to provide some useful hints;
First of all you can install the XP Pro on the Qosmio G30 this is no problem.
I assume you couldnt install the XP on the G30 because your have not installed the RAID driver firstly. As far as I know the XP would not recognize the HDD without the RAID driver.
The RAID driver installation is not very difficult. During the XP Setup procedure you have to press the F6 to include the driver from the external USB FDD drive.
If you dont have a USB diskette drive, then you could use a nLite to create a new XP CD with the RAID driver.
However despite everything Im not sure if this will help.
There could be really a hardware issue with your G30.

Xperia z1 Problem AFTER system update to latest software 14.3.A.0.681

Hello people, First of all let my just say that I am new into the ''smartphones world'' so please excuse my queries if they proof to be 'obvious' to you! I have carried out a system update to my Xperia Z1 phone yesterday (Android 4.4.2. kitkat, latest available software 14.3.A.0.681). The update seem to have been correctly performed. However I have since encounter the following issues/problems with my phone and do not know how to fix them: 1) First of all my phone will no longer rotate...why is this? Is this related to the update?? Pictures/photos can no longer rotate and also phone screen does no longer rotate! Why is this..? 2) Second the 'Notifications Bar' structure has changed : is this also the result of the update or can I do something in settings to fix it and make it as before? When I scroll dawn the notifications bar, the icons are no longer displayed at the top line but are instead spread underneath BUT this is AFTER I press 'Quick settings'. 3) Battery signal icon has changed completely: no lines included inside icon to show usage but instead usage %age is now displayed. Also, when I charge my phone, there is no icon flashing as before and now lights flashing.. 4) Also when I want to use the phone after it has remained unused for sometime it states 'swipe to unlock' and makes a 'funny' note upon performance of the act: this was not the case before.. Can you please help me with the above? I am freaking out because I am excited with my new phone and would love to make full use of it properly but it is a bit hard for me since I have no clue how to fix issues/problems appearing every now and then since I am new into these things.. Thanking you in advance

Hi there,
I think you have fixed your 1st issue.
2) Yes, Kitkat has changed the Notification Bar structure. Its a bit annoying, but to get around it you can use Widgets - Tools and select the Icon, such as WIFI to be placed on your home screen to avoid multiple clicks. You cant do anything in the settings to make it like before.
3) Battery Signal Icon - Again a Kitkat update has done that. The good thing is that it has enhanced Battery life considerably.
4) I am assuming you are stating about the "sound note" it makes when you swipe in. Thats again a Kitkat feature and you can get rid of it though Sound settings if you dont like it.
Reality is that Kitkat runs very well on Google Nexus 5. Apart from that it has issues on every other Android power Smartphone out there. I also own a Nexus 4 who recently got upgraded to Kitkat and compared it with Nexus 5. Was not impressed to be honest.
As of my upgrade on Z1, I have been facing Volume issues. When I play a video the volume is minimized for some reason. Pause and play again and it goes to Normal. I have to reboot it sometimes to play normally. It also takes ages to connect to my 3G provider, whereas previously it was fast enuf. I hope the next upgrade will fix those issues.

Small problems after system update

I have a couple of problems which appeared after a recent pacman update. A lot of stuff was updated, including the kernel and xorg.
1) Shutdown stalls at "Save system clock".
2) Ctl-Alt-F(1-6) doesn't get me out of X11. Actually, this works sometimes, but usually not.
I could fix these, if I knew where to start. Can anyone help me with some diagnostics? I have a pretty simple setup, no desktop, just ratpoison and the apps I need for work, mail, web.
Can I redo an update, and if so, how? Is there (ever) any point in doing that?

man hwclock:
--directisa
is meaningful only on an ISA machine or an Alpha (which implements enough of ISA to be, roughly speaking,
an ISA machine for hwclock's purposes). For other machines, it has no effect. This option tells hwclock
to use explicit I/O instructions to access the Hardware Clock. Without this option, hwclock will try to use the
/dev/rtc device (which it assumes to be driven by the rtc device driver). If it is unable to open the device (for
read), it will use the explicit I/O instructions anyway.
The rtc device driver was new in Linux Release 2.
So as you can see, directisa is something that SHOULDN'T do anything on your system, but for some reason it is failing. I'm guessing it is very specific to your hardware, though I've never heard of this happening.
Last edited by codemac (2008-02-11 05:13:04)

Operating system problem after system recovery

Similar Messages

Maybe you are looking for