Operating system won't boot

Just upgraded my old Athlon to a 2.8 P4 1mb cache with a 875P NEO M/B computer starts OK and can get into the BIOS but I cannot get the OS to boot ! I am still using the old hard disk a 40GB ATA 100 . any help would be very welcome thanks !!!

:biggthumbsup:Thanks I'll give it a go !

Similar Messages

System won't boot-no chime.

Despite repeated attempts and resetting the CUDA button, the system won't boot when start button is pressed. In the first few seconds it seems to make normal sounds; but no chime and settles into simply fan noise. This is true even if using C (with an Install CD). or Shift key. Is there anything else I can try? (I know it's actually a G3 B&W Motherboard; but I had nowhwere else to post it)

I do not remember exactly what was happening when it stopped. It may have been executing something , hung up, and wouldn't respond to the Command-Opt-Esc or I do remember one incident when it was booting up and stopped when it was partly thru "searching for local discs.
I checked the ref. article and tried to measure the voltages on the power connector. I was never quite sure what pin was what, since the colors did not jive with those in the article. At any rate 2 were approx. + 5 V (one was 4.85), the rest were essentially zero (I believe 1 or 2 were about 300 mv). I did notice that when the power connector is reconnected and start up is attempted, 3 little green lights come on on the motherboard. One goes off after a while.
I have tried the old Sonnet upgrade and have tried reseating all the RAM modules. All to no avail.
The Hard drive and all other parts seemed to be working fine prior to the failure.

System won't boot. INIT: No inittab file found Enter runlevel:

After the latest update that changed how intel ucode is updated, my system won't boot.
I think I missed a line when I edited "/etc/grub.d/10_linux" and ran grub-mkconfig -o /boot/grub/grub.cfg.
Any ideas on how to fix this?
I can't run grub-mkconfig from another machine, as it uses the live kernel info.
Any help would be greatly appreciated. Otherwise I'll have to reinstall

TheSaint wrote:
SyXbiT wrote:
But I still get the error:
system won't boot. INIT: No inittab file found
Enter runlevel:
It seems to me that you've an old Arch version. inittab is deprecated AFAIK.
What is the Arch iso version?
That would probably be mid-2012 at the very latest I think as that's when I remember completely moving over to systemd...
@SyXbiT: Are you using the current Arch install ISO?

System won't boot up

Help please. I have a kt6 delta running an athlon 2700+ xp chip, 512 mb ddr 400.
When I set the fsb at the correct speed for the chip (166) the system won't boot hard drive led lights up constant. dvd drive and cd-r drive each run but the system won't boot. system seems to run fine at default and 133 mhz but the chip is incorrectly identified in windows (xp pro sp1) Any Ideas whats wrong?

Hi - I have the same board with the same processor, I have not problems rebooting after changing the bus speed. But I have had problems rebooting after adding in any card PCI or AGP. the system seems to have trouble clearing the Cmos, I would try clearing the CMOS with the JBAT. it doesn’t always seem to work but I have had some luck, though I have also pulled out the battery a couple of time too..
Good luck!

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Clean install OS.10.6.8 update it completly. May be you ignored some firmware update.
I have two incedents.
My thunderbolt port stopped working after upgrading to ML 10.8. I booted from external 10.6 , 10.7 still didnt work. Then i clean installed 10.6.8 and ran software update it updated the thunderbolt firmware and all is well now. This firmware update for some reason didnt show up in ML 10.8.
Secondly , when i upgraded my Brother's Macbook from 10.5 to 10.6.3 it would install but stuck with crossed out circle. Then i downgraded checked for update found an efi update , then the 10.6.3 worked fine.

[SOLVED] Switch to systemd - Now system won't boot

I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
init=/bin/systemd
line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
Last edited by fettouhi (2013-12-08 14:42:04)

fettouhi wrote:
Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
when I try to enable alsa and dbus I get this
[root@andre ~]# systemctl enable alsa-store.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable alsa-restore.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable dbus.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work. How can I just get use the old i-tunes?

I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work. How can I just get use the old i-tunes?

Hi,
Not sure if any of you above have managed to solve your problem or not but after coming across this same problem myself today as I am currently 'sofa bound' I decided to make it my mission to find a way around it.
Initially I did think, having ready what seemed like a million questions and people with the same problem, that the only way was to buy OS X 10.5 ... HOWEVER, no. In among all these threads I found a jewel - Download I Tunes 9.2.1 which gets rid of the download itunes 10 advert and allows you to then buy from itunes again :-) I am now one very happy lady.
I apologise to all those that dont have older versions of OS X that maybe wont support even this upgrade but certainly for those like me with just 4yr old lap tops at least it means it not longer means buying a new one.
Hope this helps son very frustrated people like myself - so much for apple support!

Btrfs: System won't boot anymore after unclean shutdown

Hi,
I have a problem with my ArchLinux (kernel 3.19.2-1-ARCH).
I have my root partition as BTRFS and no /boot partition.
After an unclean shutdown the system won't boot anymore.
GRUB loads the kernel and the kernel starts but it hangs saying: Mounted /dev/sda3 on real root.
Then, I have to start a Live CD and do:
btrfsck /dev/sda3
After that the system boots correctly.
I've tried adding fsck to the HOOKS in the mkinitcpio.conf file and in fact it tries to fsck the filesystem (but with BTRFS, fsck.btrfs doesn't work...)
What can I do?
Thanks

I'm also having this problem. I tried booting up the netinstall image to debug it, but I can't mount my btrfs volume from there either: mount just hangs. After a while, the kernel goes:
[...] INFO: task mount:612 blocked for more than 120 seconds.
[...] Not tainted 3.19.2-1-ARCH #1
[...] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[...] INFO: task btrfs-transacti:636 blocked for more than 120 seconds.
[...] Not tainted 3.19.2-1-ARCH #1
[...] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
From this post I guessed that I might just need to wait so that I could defrag the volume once it was mounted, but it's been hanging for over 15min now (the message above continues to come up periodically).
Like the OP in the thread I linked to above, my btrfs volume is inside an LVM volume (which is on dm-crypt). Don't know whether that's relevant.
Output of btrfs-check:
Checking filesystem on /dev/pixie/btrfs
UUID: e04cc661-e31a-4dbf-870d-664bc913e34a
found 76855677062 bytes used err is 1
total csum bytes: 72928436
total tree bytes: 2092515328
total fs tree bytes: 1888452608
total extent tree bytes: 104644608
btree space waste bytes: 357251032
file data blocks allocated: 181197139968
referenced 109440282624
btrfs-progs v3.19
dmesg output:
[ 36.824998] Btrfs loaded
[ 36.826713] BTRFS: device fsid e04cc661-e31a-4dbf-870d-664bc913e34a devid 1 transid 98618 /dev/dm-3
[ 46.219014] BTRFS info (device dm-3): disk space caching is enabled
[ 46.259830] BTRFS: detected SSD devices, enabling SSD mode
[ 240.333313] INFO: task mount:539 blocked for more than 120 seconds.
[ 240.335542] Not tainted 3.19.2-1-ARCH #1
[ 240.337795] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.340263] mount D ffff8800cf2837f8 0 539 453 0x00000000
[ 240.340277] ffff8800cf2837f8 ffff8800cf2331b0 0000000000013f00 ffff8800cf283fd8
[ 240.340286] 0000000000013f00 ffffffff81818540 ffff8800cf2331b0 ffff8802094f67a8
[ 240.340291] 0000000000000004 ffff8800cf283758 ffffffffa0a2fc91 ffff8802094f67a8
[ 240.340298] Call Trace:
[ 240.340335] [<ffffffffa0a2fc91>] ? set_extent_buffer_dirty+0x71/0xc0 [btrfs]
[ 240.340357] [<ffffffffa0a05796>] ? btrfs_buffer_uptodate+0x56/0x80 [btrfs]
[ 240.340366] [<ffffffff8155e999>] schedule+0x29/0x70
[ 240.340389] [<ffffffffa0a47745>] btrfs_tree_lock+0x65/0x200 [btrfs]
[ 240.340396] [<ffffffff810b4380>] ? wait_woken+0x90/0x90
[ 240.340410] [<ffffffffa09e5cd9>] btrfs_search_slot+0x799/0xaa0 [btrfs]
[ 240.340425] [<ffffffffa09e79f5>] btrfs_insert_empty_items+0x75/0xd0 [btrfs]
[ 240.340446] [<ffffffffa0a47a37>] btrfs_insert_orphan_item+0x67/0xa0 [btrfs]
[ 240.340465] [<ffffffffa0a4a12e>] insert_orphan_item+0x5e/0x90 [btrfs]
[ 240.340482] [<ffffffffa0a4c531>] replay_one_buffer+0x361/0x380 [btrfs]
[ 240.340504] [<ffffffffa0a2f244>] ? alloc_extent_buffer+0x34/0x370 [btrfs]
[ 240.340523] [<ffffffffa0a488f3>] walk_down_log_tree+0x1d3/0x410 [btrfs]
[ 240.340540] [<ffffffffa0a48bfb>] walk_log_tree+0xcb/0x1d0 [btrfs]
[ 240.340558] [<ffffffffa0a507f7>] btrfs_recover_log_trees+0x1e7/0x490 [btrfs]
[ 240.340575] [<ffffffffa0a4c1d0>] ? replay_one_dir_item+0xf0/0xf0 [btrfs]
[ 240.340596] [<ffffffffa0a08b3e>] open_ctree+0x17ae/0x2030 [btrfs]
[ 240.340609] [<ffffffffa09dd633>] btrfs_mount+0x843/0x920 [btrfs]
[ 240.340618] [<ffffffff8117b7aa>] ? pcpu_alloc+0x35a/0x680
[ 240.340628] [<ffffffff811d5d68>] mount_fs+0x38/0x1c0
[ 240.340634] [<ffffffff8117bb05>] ? __alloc_percpu+0x15/0x20
[ 240.340641] [<ffffffff811f116b>] vfs_kern_mount+0x6b/0x120
[ 240.340647] [<ffffffff811f4184>] do_mount+0x224/0xb40
[ 240.340653] [<ffffffff811f4dae>] SyS_mount+0x7e/0xe0
[ 240.340661] [<ffffffff81562809>] system_call_fastpath+0x12/0x17
[ 240.340671] INFO: task btrfs-transacti:561 blocked for more than 120 seconds.
[ 240.342927] Not tainted 3.19.2-1-ARCH #1
[ 240.345175] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.348473] btrfs-transacti D ffff88020b88bd98 0 561 2 0x00000000
[ 240.348483] ffff88020b88bd98 ffff880211edc590 0000000000013f00 ffff88020b88bfd8
[ 240.348491] 0000000000013f00 ffff8802162289f0 ffff880211edc590 ffff8802094a70c8
[ 240.348496] ffff8802094d8000 ffff880200000000 ffff8802094d8000 ffff880200000033
[ 240.348501] Call Trace:
[ 240.348511] [<ffffffff811b5d1a>] ? kmem_cache_alloc+0x16a/0x180
[ 240.348525] [<ffffffffa09e07ca>] ? btrfs_free_path+0x2a/0x40 [btrfs]
[ 240.348543] [<ffffffffa0a64213>] ? __btrfs_run_delayed_items+0xf3/0x1d0 [btrfs]
[ 240.348550] [<ffffffff8155e999>] schedule+0x29/0x70
[ 240.348568] [<ffffffffa0a0b555>] btrfs_commit_transaction+0x2a5/0xbe0 [btrfs]
[ 240.348573] [<ffffffff810b4380>] ? wait_woken+0x90/0x90
[ 240.348590] [<ffffffffa0a06fc5>] transaction_kthread+0x1d5/0x240 [btrfs]
[ 240.348605] [<ffffffffa0a06df0>] ? btrfs_cleanup_transaction+0x5a0/0x5a0 [btrfs]
[ 240.348611] [<ffffffff81091748>] kthread+0xd8/0xf0
[ 240.348617] [<ffffffff81091670>] ? kthread_create_on_node+0x1c0/0x1c0
[ 240.348624] [<ffffffff81562758>] ret_from_fork+0x58/0x90
[ 240.348629] [<ffffffff81091670>] ? kthread_create_on_node+0x1c0/0x1c0
Last edited by ouroboros8 (2015-04-02 12:37:25)

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

Do you need a copy of a Windows operating system to install Boot Camp?

I want to install Microsoft Windows on my macbook but I don't know if I need a copy of a Windows operating system to install boot camp. I have a copy of Windows XP Professional but when I lunched the Boot Camp Assistent program it prompt me with a box and asked if I wanted to install windows 7. Do I need a copy of the Windows 7 operating system or does it come with Boot Camp?
I'm confused with how Boot Camp works.
If you could please help me, that would be greatly appreciated.
Thank you in advance!

You need Boot Camp to create a space in which to install Windows, you must own a copy of Windows. You can only install Windows 7 or 8.
Read the Boot Camp documentation and make a backup of your Mac before you start.

Windows 7 operating system won't load Photoshop CS2?

I've purchase a new computer with Windows 7 operating system. My photshop CS2 won't load. I've
tried adobe support. They said I have to upgrade to Photoshop 3 or 4 unless you have a s
olution here. If you don't can I just purchase the upgrade and if so, how can I get the upgrade
on my new computer if the originals won't load.
JW

Hi, and welcome to Apple Discussions.
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out. If Safe Mode doesn't work for you, post back and we will explore other options.

Windows 8: Choose An Operating System Won't Go Away

Hi. The Choose an operating system prompt when I boot won't go away, even if I've set it to just go into Windows 8 (the other is Ultimate Windows 7). I've also checked the start up in the control panels, it's on Windows 8. Is there a more advanced way to get rid of this prompt and just let it go into Windows 8?
Thank you in advance. Have a great sunday mass/great weekend.
God bless,
Alvin

yup
once you're in windows hit the follow keys to bring up the system information window
command + fn + esc
choose 'advanced system setttings' in the left hand column to launch the 'system properties' window
by default it will be on the 'advanced' tab.. which is good!
hit the 'settings' button in the 'Start-up and Recovery' section to option up the startup options window
I think 'Time to display recovery options' might be ticked in your case.. so untick that and hit ok..
if this still don't work.. untick the 'time to display list of operating systems' as well.

Operating system corrupted, wont boot. Any way to get admin rights in cmd prompt?

My operating system has gotten totally corrupted and no longer boots. I get a recovery screen that tells me my registry is corrupted. File: \Windows\system32\config\system, Error code 0xc000014c. I have no recovery media (my computer, a refurb, did not com with any) I want to wipe the hard drive totally clean and do a fresh clean install. I can get to the command prompt through the system recovery by hitting esc at boot up but it wont allow me to reformat the hard drive because of write protections. I tried turning off the write protections at the cmd prompt level but it fails because I cant access it with admin rights. The only way I have found to turn on admin rights for the cmd prompt in online searches is to do it from inside the win8 operating system. Obviously I cannot do that as the OS is too corrupted to be run. Is there any command I can use at the dos prompt that will turn on admin rights? Or better yet just some way to force a total reformat?
Thanks!

Are you following this? No need for command prompt. Just choose Recovery Manager.
Windows 8 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&tmp_task=solveCategory&cc=us&dlc=en&lc...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

[SOLVED] System won't boot (boots fine in fallback mode)

HI guys,
I just rebooted my headless server for the first time in a while, but it won't boot up.
I just sits at this screen:
Please note the system does boot using fallback mode.
(also, nothing to do with the latest boot problem - systemd-sysvcompat is installed and boots fine in fallback)
Last edited by kaipee (2013-05-18 21:23:13)

That screen shot looks like its booted to me? I see a login prompt

A60-155: Operating system will not boot.

I have a TOSHIBA A60-155. when i turn on the laptop it willnot load the operating system, i have read the manual and apparently it is failing the self test i have tried selecting all start up modes but nothing will work. I have not yet tried any Recovery cd's. The problem started after i pressed the power off because the computer froze. Does anybody have the solution to this problem???
I would also like to know what BIOS is and do i have to upgrade it? my laptop is about six months old.

Hi Ben,
Firstly, you should not need to update your BIOS if your notebook is only a few months old.
Secondly, The start sequence of your notebook is a three stage process :-
1. The POST will check the functionality of your attached peripheral resources, HDD DVD etc.
2. The BIOS will then load and deal with the allocation of RAM etc and also initialise the basic system functions of your notebook.
3. The BIOS will read the Master Boot Record to ascertain what operating systems you have installed and will then either load the required system or give you a menu of possible options from which you can choose.
If you press the ESC key as soon as the power on process starts you should see the results of the first two steps (The POST and the initial BIOS load).
The fact that you see the selection menu offering the choice of load types (i.e. Safe Mode etc.) would suggest that your system cannot load your operating system from the hard drive. The fact that none of the available options work indicates that there is a basic problem with your hard drive.
If you have a bootable CD then I would suggest that you try to boot your system from the CD (Press and hold the F12 key during the initial power on sequence and then select your CD drive from the list).
Alternatively you could restore your OS from the recovery CDs but this will format your hard drive resulting in the loss of your data.
HTH

Operating system won't boot

Similar Messages

Maybe you are looking for