Operating system wont load
i believe that i may have turned off the power switch on the wall that feeds electricity to everything in my room, while my computer was running pro tools. Now when i turn on the computer, my operating system does not load and it does not ask for my password. All i see is a blank blue screen, but my mouse is being recognized. I hope my files are not lost.What do i do to restore my OS(tiger) without losing all the files on my computer?
Hi, B. G. Welcome to the Discussions.
1. I suggest you begin troubleshooting using the process specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. This is a good procedure to run after a power failure.
2. A blue screen at startup can also indicate a problematic Startup or Login item. If step 1 above does not resolve the issue, my "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is exacerbating the problem.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Similar Messages
-
during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #
In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right???? -
Support for operating system to load blackberry 8900
support for operating system to load blackberry 8900 javelin completely blank blank with no operating system and tries to desktop manager and nothing it can not reach by connecting with jvm and stops saying conmpletar could not load due to a connection of several steps someone could help me
Solved!
Go to Solution.claudia_0080 wrote:
does not work
But it does.
Your three word response lacks any clue to any error or issue you encounted, let along a civil thank you.
We're willing to help, but you need to cooperate.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
New system wont load WIN XP Pro
Hi all,
Thanks for all of your help (see last post). I finally got my box together. The problem I have is that I cant get WIN XP Pro to install. It starts the set up and then loads a but load of drivers... then says starting Windows Setup at the bottom right of the screen. Is there something special I need to do?
I am going to get a new Case and PSU on Monday as I found my power switch is broken on my new case...
Athlon XP 2400+
K7n2 D-ILSR
BFG Asylum GF4 Ti4200
60 GB Maxtor Diamondmax
Liteon DVD
Liteon CDRW
Fudin Aluminum Case w/ 400 w Raidmax PSU
Mushkin Level 2 Dual Pack (256x2)
Also, my cpu fsb is set at 100 mhz, when I set it to 133 the system wont post. The sys gives me a mem error on the D bracket and beeping. Could it be my PSU? will be buying an Antec or Enermax on Monday....Hi,
I have a K7N420D Pro Mobo and I had a similar problem. There were two issues:
1. I have a PCI RAID controller (add-in card).
2. I plugged my cable modem into my board's ethernet
controller (I was hoping for XP to auto detect).
I tried to install XP on a number of occasions but it failed each time - I removed both of the above and it installed first time.
I suppose it would be a good idea to keep your Mobo peripherals to a bare minimum whilst installing XP. Install your cards/peripherals once you have XP installed.
As to your Mem and FSB problem - I've no doubt spomeone'll be along in a minute......
Axel -
How do I get my new 3GS iphone operating system to load?
My operating system won't reload after numerous attempts at restarting and removing sim card.
Restore the device.
-
When i press the power button the system stays with the image of the apple, and the "thinking" timer in the screen, but it wont proceed to the main frame, it is just stuck there.
The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
System wont load 1 in 10 times
Dear Guys,
My computer won't load properly maybe 1 in 10 times that I turn it on. The CD and writer drives will spin up and down, the monitor won't power on, and nothing else really happens.Then if i press the restart button it loads. Sometimes i have to press it more than once. The power led is on and the HD led lights up for some time and then goes off .Most other times my computer is totally fine.Please tell me what to do?
Windows XP Home Edition Service Pack 1 (build 2600)
MSI MS-7058 100 (915g combo)
Processor a Main Circuit Board b 2.80 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: MSI MS-7058 100
Bus Clock: 800 megahertz
BIOS: American Megatrends Inc. V1.6B0 02/22/2005 Drives Memory Modules c,d 79.97 Gigabytes Usable Hard Drive Capacity
28.22 Gigabytes Hard Drive Free Space
HL-DT-ST CD-ROM GCR-8523B
LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
3.5" format removeable media [Floppy drive]
ST380013AS [Hard drive] (80.02 GB) -- drive 0 248 Megabytes Installed Memory
Slot 'DIMM0' is Empty
Slot 'DIMM1' has 256 MB
Slot 'DIMM2' is Empty
Slot 'DIMM3' is Empty
Intel(R) 82915G/GV/910GL Express Chipset Family [Display adapter]
BENQ FP567s [Monitor] (15.2"vis, May 2004Hi novjoe
thanks for the reply heres the full system specs and psu specs . I checked out the underneath the mobo. Nothing found. I also removed all the cd roms , floppy ,extra fans etc and checked so i doubt PSU problem . Could it be a possibility of a fauty RAM ?
Because when i removed the ram we get the same symtoms -- Fans runnig ,led lights up No monitor signal etc.Thanks for the help. iam quite freaked out i love my comp so much.
Motherboard : MSI MS-7058 100
Windows XP Home Edition Service Pack 1
2.80 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache
Cd roms:
HL-DT-ST CD-ROM GCR-8523B
LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
Floppy : 3.5" format removeable media [Floppy drive]
Har drive : Seagate
RAM : Seagate 256
Controllers
Standard floppy disk controller
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
Primary IDE Channel [Controller]
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
Secondary IDE Channel [Controller
Bus Adapters Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Audio
C-Media High Definition Audio Device
Unimodem Half-Duplex Audio Device
Other devices
HID UPS Battery
American Power Conversion USB UPS
Frontech USB PC Camera
Built-in Infrared Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Microsoft PS/2 Mouse
One Case Fan
Modem
Smart Link 56K Voice Modem
PSU info
AOpen psu
Ac input :115/230v -6/3a 60/50hz
dc output :250w
+3.3v-- 14.0a (org)
+5v--25.oa (red)
+12v--8.oa (yel)
+5vsb--2.0a (purp)
-5v--0.3a (white)
-12v-- o.8a (blu)
p.g signal (gray) ground (black)
+3.3 and +5v = 165w max -
Help operating system wont boot up
its just stuck going in circles i tried f2 f8 f12 nothing just goes in circles,,,,,,says starting in normal mode,,,,,but it never starts,,,,,,,,,,,,goes back to the toshiba screen with f2 f12 at bottom,,,,,,,its a toshiba labtop,,,,,thanks to anyone who can steer me in the right direction,,,,it got turned off abrubtly with many programs running,,,thanks
What model of laptop? What version of Windows? Se7en, Vista, XP, 2000, ME, 98, 95, 3.1? Do you have your Recovery Disks? We aren't mind readers here and have no way of telling you anything usefull if you don't give us specific information.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
Re: My Satellite laptop wont load up
Hi
My laptop is not even a year old yet, it has been working fine until today.
I switch it on and the Toshiba bit comes up then after that its just a black screen, and then it says
realtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
pxe-e61 media test failure , check cable
pxe-mof exiting pxe rom.
no bootable device - insert boot disk and press any key
I dont have a boot disk or anything! Does anyone no what this means?
Thanks for any help
LaylaEvery notebook has specific boot order and in this boot order are different hardware components like optical disc drive, hard disc drive or LAN.
The boot up is always defined in BIOS settings and there is, for instance boot order HDD, LAN and ODD. If notebook cannot start from HDD ist starts from second defined device (LAN) and go on.
Boot order in your Satellite notebook is not known to me but somehow it stays on option to boot-up from LAN device and you can see this message on the screen.
Start your notebook again and press F2 several times to enter BIOS settings. Set it to default and try again. if the same happen start notebook one more time but this time with F12 to enter boot options. With up and down arrows chose HDD device and press enter. If HDD is OK operating system should load up. If not there is some problem with preinstalled OS.
Please test it and send some feedback. -
Error loading operating system- windows xp/windows me
Hi,
So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
If anyone at all could help me id be so grateful, its quite annoying/upsetting. ThanksWelcome to the HP Forum!
nickiblahblah wrote:
Hi,
So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
If anyone at all could help me id be so grateful, its quite annoying/upsetting. Thanks
Wow! Your PC is almost as old as my (1996) Compaq 14XL244 Notebook.
It still works, but required hard disk replacement about six years ago. I suspect you will have a very hard time getting any files from your IDE hard disk. You can try putting the hard disk in an external enclosure and connecting it via USB to another PC.
The error message that you are seeing means that the BIOS can no longer recognize the hard dive.
It is probably time to consider updating to a more recent PC. You certainly got plenty of good service life from it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Accounts system prefrences page wont load
Accounts pane of system prefrences wont load.
and i use multiple users.
I have a few fidle finger users so i need to limit them.
thanx
jordIf those other solutions don't do the trick, as a last step I would recommend performing an "Archive and install". Basically, this re-installs Mac OS X without removing any of your user files, settings, applications, etc. It re-installs your operating system, but in a way that preserves everything that you had before. It should fix your System Preferences problem.
For detailed instructions on how to perform an archive and install, go here: http://docs.info.apple.com/article.html?artnum=107120
Good Luck!
Jason -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise -
I'm trying very unsuccessfully to reinstall the system from scratch, so that I have a clean computer. I'm starting with 10.5 and then going to upgrade in increments from that to the last operating system the computer will run, which is 10.6.8.
Firstly I've wiped the hard disk in Disk Tools and then started it up from the master disk of 10.5, and its telling me it will take 64 hours and some minutes to install, so I can't keep moving the mouse to stop it going to sleep for that long.
I know it sounds as though something is wrong, but I have run both Disk Tools and Tech Tool Pro through it and both say there's nothing wrong with either the computer or the hard disk, and it was running fine (if slow - but that's its age!) prior to this clean install.
This computer is the first of the intel Macbooks and is a single core intel processor with 1gb of Ram.
What I need to do is to stop it going to sleep during the install, as every time it does it just halts the install and over night, for instance, I'm no further forward than I was the night before, even though I left it going all night.
All I'm trying to do is get it to 10.6.8 so that I can run Bootcamp on it and turn it into a PC to do my accounts (and no, the software we use only runs on PC, but Paralles, VMWare Fusion etc still make it painfully slow to use, and It's bad enough having to do accounts without having to wait for it to do every move...)
I can't go straight to 10.6 as the only copies we have of this are "drag and drop" upgrades that Apple supplied with 3 of our other Macs. Also the computer won't read dual layer DVDs (too old) so I can't load the full copy we have made of the OS.It's simply called Photos and there is no options/setting thing on it. I have windows 8, it's a stand alone photo library viewer.
-
Operating system corrupted, wont boot. Any way to get admin rights in cmd prompt?
My operating system has gotten totally corrupted and no longer boots. I get a recovery screen that tells me my registry is corrupted. File: \Windows\system32\config\system, Error code 0xc000014c. I have no recovery media (my computer, a refurb, did not com with any) I want to wipe the hard drive totally clean and do a fresh clean install. I can get to the command prompt through the system recovery by hitting esc at boot up but it wont allow me to reformat the hard drive because of write protections. I tried turning off the write protections at the cmd prompt level but it fails because I cant access it with admin rights. The only way I have found to turn on admin rights for the cmd prompt in online searches is to do it from inside the win8 operating system. Obviously I cannot do that as the OS is too corrupted to be run. Is there any command I can use at the dos prompt that will turn on admin rights? Or better yet just some way to force a total reformat?
Thanks!Are you following this? No need for command prompt. Just choose Recovery Manager.
Windows 8 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&tmp_task=solveCategory&cc=us&dlc=en&lc...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Maybe you are looking for
-
Creating a Single Report from Oracle Data Base and BI Answers
Hi, I wanted to create a single report by using a BI Report where in we have project and Activity columns,now I want to add column with Program to see the results.Program data is in Oracle Database. Can some one help me how to create the report. ii.H
-
How do I get my email to sync on my new mac?
I just got a new MacBook Pro and added my personal Gmail account to the Mail app just fine. I'm trying to add my business email, and it went through fine. Except, my messages aren't showing up... I'm using IMAP so that it is synchronized across all
-
How can you get the mail boxes in yahoo onto the e.mail app
How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?
-
Can't import from camcorder with iMove '08
I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the imp
-
Read every character in a string
Hi, I want to read every charater in a string and if I find a special character(¿) then want to replace with replace it with(°) symbol. length of the characters are not fixed. Please advise. Regards, Arnie.