Operating Unit is not showing

Hello Team,
I have in processing of defining a new inventory organization. While selecting the accounting options, I am not able to find my operating unit in LOV.
Am I missing any pre-requisite ?
Application Release:-12.1.3
Thanks for your help !!
Cheers
Abhi

Abhishek,
You will get the values in operating unit field of Accountign information/ inv org definition only when there is a operating unit classification already defined that is assinged to same primary ledger which you are trying to use for your inventory org.
in your case, it looks like operating unit org classifcation that is using the same primary ledger that your are trying to asisign to your new inv org is not already defined. hence you are not gettign values in the LOV.
You can try defining this Operating unit classification with the same primary ledger first and then go ahead with inv org definition. you should be able to get the vlaues.
hope this helps,
Prabhu Chepuri

Similar Messages

Unit does not show correctly(BI 7.0)

Hi, Gurus,
I have key figures with unit 'EA', I checked in the cube and ODS, they are 'EA', but in analyzer, it shows '*****", this key figures are not aggregated, even I drag the '0UNIT' to the row, it still shows '*****'; and for the key figures with unit 'ST', it does show 'EA' in analyzaer. What happened? please help. thanks a lot.

Hi,
Just check it out in your query have you used any cell defination?

Opera 9: Dates not showing in email [SOLVED]

I notice that, when reading mail in Opera 9 under Arch, the Sent column displays no dates whatsoever. This occurs whether I use the Arch supplied binary, or use the downloaded binary obtained from the Opera web site. This only occurs under Arch. That is, dates show up fine under other distros.
Anyone able to dupe this?

So far, the other distros on which I tested Opera are Fedora Core 5 and Meps 6. Neither of them cause this problem in Opera, so I can only assume it's an interaction between Arch and Opera, not Opera itself. On my Arch box, I tested Opera under KDE and Xfce-svn, and in both environments, the problem arises.

Opera mini does not show any languages it show onl...

after my c 7 update to belle refresh my opera mini languages show only box . I unistall opera mini and install again with opera latest version but problem are remain same..... Is there any solution

Type opera:config in the address bar in your opera mini and connect.On the next screen, go to the last option which says "use bit map images for complex scripts" change this to yes. Scroll down and click save.DONE!Now type in the address you had an issue with and the page should load with proper letters instead of boxes.
In Love With My C6-01:Now running on Nokia Belle!

Mrp per unit filed in excise invoice not showing value

Hi,
in excise invoice print mrp per unit value not showing, to find solution what process i need to follow
please find attachment for screen shot.
regards,
sivakoti.

Hi all
i got solution from my issue , as above given MRP per unit value picking from MRP per case value,
here if MRP per unit value is more than 3 digits(ex: 1000 rs/-) then value not appearing in excise invoice ,for this my ABAP r has done program variant changes for numeric length increased for MRP per unit field
thank you to G Lakshmipathi and Ashok Kumar Telugu for spending your valuable time on this issue .

Setups for new operating units not loading to target

If there is a new operating unit in the source, setups for that operating unit do not seem to load into the target if that new operating unit does not exist in the target.
Is there a script to address this issue?
Any additional advice will be appreciated.
Edited by: user11071661 on Apr 16, 2009 1:34 PM

Hi,
There are lot of dependencies between setup data that you are trying to load. Operating Unit depends on Accounting Setup which in turn depends on setups like Calendar, Currencies and Chart of Accounts. So, you have to make sure that you have loaded all prerequisite data before loading operating unit.
Thanks
Mugunthan.

MO Operating Unit Query

Hi Experts
I am working on Oracle EBS R12 .
I have a query regarding Multi org valueset for assigning the report parameter.
My Case is
MO Operating Unit ORG ID bydefault set in SITE Level
*If ORG ID assign in responsibility level then my report parameter LOV shows that org id which is assigned in responsibility level otherwise MO Security Operating Unit ORG ID shows which could be multiple"
how can i cater this scenerio in my report to show parameter according to this scenerio
Please Help

Did you ever figure this out? I'm encountering the same issue.
Thanks.

Data Security for single operating unit

Hi,
We have only one OU implemented and have two businesses X and Y. Now, Y deals with patient healthcare information so they are subject to HIPAA regulations, but X is not. A business requirement was defined that X users should not have access to Y customer data, but currently the only way we were aware of separating data within Oracle is through operating units. Multiple operating units is not an option so we need some soluion around it.
All pointers are appreciated.
Thanks,
Rahul

Hello Justin..
Sorry for the late response...We'll have the data,say for customers, in our database all with the same OU. But at the same time, we need to segregate the data so that X business can't see Y's customers and vice versa. I know this is possible through the OLS but wanted to weigh different and easy to implement options, as we already have a huge set of data that we need to segregate based on business.
Thanks,
Rahul

High Point Rocket Raid 622 Does Not Show Up

I am tryng to get a HP Rocket Raid 622 to show up on a 2009 Mac Pro 2.66 Ghz macine. I recently removed a 622 card, which was working fine, that had come with a Sas Digital RAID 5 enclosuer. I sold the enclosure and with it, the RR 622 that was inclueded. I purchased a new 622 and that unit will not show up in my system. I'm running Mac OS 10.6 which is supposed to recognize the card without drivers. Any suggestions would be helpful.
Thank you.

The version I have includes directions for Mac but does not specify Mac on the packaging. It is not clear that there are two versions and I didn't realize that was a possibility until now. Are you saying that there is a Mac version and a non-Mac version?

How to change the "Operating Unit" in AP invoice?

Dear all:
when I login AP module, Invoice > Entry > invoices, found that "Operating Unit" is not the name what I want. I make sure I am login the right responsibility.How can I modify "Operating Unit" and change it to the right?
My environment is : R12.1.3
Regards
Terry Chen

Go to sysadmin >profile > system
Check the responsibility checkbox; enter the resp. name
Uncheck all others
Enter profile name = MO: Operating Unit
Hit find; enter the appropriate value and save
Also check the security profile's setting , after change the setting, the issue solved.
Thank you Sandeep Gandhi

Stor.E TV does not show the menu - cannot access the files

M new unit does not show the menu on bootup.
So i cannot access my files
nmck

Hi
Are you able to set the Stor.E TV to default (factory) settigns?
Choose:
Setup -> General Setup -> Default
But if you do not see even this point then I assume that this Store TV does not boot anymore and this might be related to a hardware malfunction :(

Project gl_period_status not there for particular operating unit

Hi,
We try select Gl_period_status for Project applications.it is not showing particular operating unit.But other operating unit it showing project period.what could be reason.Any setup need.Please help me.
reg
sasikumar.r

Hi Viren,
Initially I have tried what you have said, but ERROR is coming as AS YOUR PREVIOUS DELTA IS INCORRECT, YOU CANNOT LOAD THIS DELTA. I am not getting any option of REPEAT DELTA.
"I have set to DELTA REPEAT in RSA7(ECC) , but after saving, it is again coming back to DELTA UPDATE."
As I am not getting REPEAT DELTA, to get that I tried saving the 0FI_GL_4 as DELTA REPEAT in RSA7 (ECC).
Please let me know any more information required.
Thanks,
Bindu.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Invoice validation program error:Could not find operating unit options

Dear Team,
Once my Payables Open Interface Import program successfully completed, I am trying to running invoice validation program which is ended with warning as bellow,
(Bulk CALCULATE) START SYSDATE 17-DEC-2012 04:04:19
Could not find operating unit options
Encountered unexpected error: User-Defined Exception
(Bulk CALCULATE) END SYSDATE 17-DEC-2012 04:04:23
and invoice placing into Dist Variance hold,
my interface program placed data in to based tables (ap_invoices_all and lines_all ) but distributions are not getting generating. Can you please do help me.
Find attached excel sheet for ur references.
Thanks
Sathiya

Make sure the library (pll file) is in the path indicated by your FORMS60_PATH in the registry.
Hope that helps,
Karim.

A div in a site am developing is not showing in firefox but shows on all the other browsers (chrome, safari, opera and explorer), can anyone help?

i am developing a site and i used divs in making the arrangements.
all other divs on the page shows but on particular one does not show.
i gave all the divs a border with a red color, all the other browsers(explorer, opera, chrome and safari ) shows the divs with the colors but firefox does not even show the red color

Can you post a test case demonstrating the problem? It doesn't need to contain confidential content or active links. (This forum doesn't handle raw HTML very well, so I don't recommend pasting code here unless you convert your angle brackets to HTML entities.)

Operating Unit is not showing

Similar Messages

Maybe you are looking for