Operation 0001 seen in cort but not in cor6

Operation 0001 seen in cort but not in cor6
I have a customised control key, for which i have chosen confirmation possible but not necessary.
Pls help.
Thanks
Neeraj Agrawal

Dear Neeraj,
Go to T.Code COR6,after mentioning the process order no,in the top menu ->Parameters->variable---> a pop up screen for
the plant and order type gets displayed,press enter-->now include the check box for confirmable under operation selection and
check the impact whether are you able to see the phase number.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • Line items seen in fbln but not in process open items

    Hi Gurus,
    one line item is seen in fbl3n but not in process open items in f-07,
    the entry is rent a/c Dr
                         to rent payable a/c
    we can see is fb03, fbl3n of both accounts
    Pl suggest. I am unable to clear

    Dear Shymalasandia,
    You can reach REGUP by se11 and insert the document number that You can see by FBL1N but not during the payment.
    Probably it is contained into a payment proposal (F110) and therefore You cannot pay it manually (to avoid double payment).
    If You find it into REGUP table, You have two options:
    1.pay it by F110
    2. delete the payment proposal by F110 (menu> edit> proposal--> delete) and pay it manually.
    I hope this helps.
    Mauri

  • Sales order is seen in MD04 but not on backorder report CO06.

    Hello friends,
    I went through several threads on backorder but couldn't find answers to my query.  Kindly help.  Thanks.
    - Are there any alternative to doing backorder processing ?
    - Can backorder processing be automated ?  How ?  What transaction ?
    - An MTO sales order is seen on MD04 but not seen in backorder processing (I think CO06) – so what could be the reasons ?
    - I believe SAP recommends one report to be run regularly to delete old/open sales orders – what is that and why it needs to be run ?  Does it have any affect on backorder processing ?
    - Chetan.

    Hi Chetan,
      Back orders are generally updated with the help of transaction V_V2.
      Let's say that you were supposed to deliver one order on 25.06.2007 but the delivery has not been created yet.
      Then V_V2 would determine the new schedule line date for this particular order along with the quantity which can be delivered on that particular date.
      You can automate the process by just putting the transaction V_V2 for background scheduling.This background scheduling can be done with the help of transaction SM36.
    Reward points if it helps.
    Regards
    Karan

  • Bug/Solution: iPod seen by Windows but not by iTunes

    (apologies if this has already been reported)
    So I had the problem where iPod would show up in Windows as a drive letter, but iTunes wouldn't see it at all. I had followed all the instructions in this article to no avail:
    http://docs.info.apple.com/article.html?artnum=93716
    And then I tried something which ended up working. This may be somewhat of an edge case scenario, but it's possible others may hit it:
    My OS is installed on the D: drive, instead of normally on C:. Also, there was nothing assigned to C:. So when the iPod was plugged in, Windows gave it C:. As I said, iTunes would not recognize the device at all.
    On a whim, I reassigned some other USB device to C: so that the iPod would be forced to a different drive letter (I think it was G). Lo and behold, iTunes recognized the iPod just fine.
    I didn't do any other testing on it, but it seems if iPod's drive letter < OS letter, iTunes won't see it(?)
    Anyway, hope this helps someone else.<br>
    30gb   Windows XP  

    Thanks a lot, I must have spent close to 15 hours trying to figure out why my ipod didn't work with my re-installed windows. It turned out my windows was on drive H:, and the ipod was being mounted to drive C:. I switched the ipod to drive I:, and it finally worked! The following instructions may help if your computer sees your ipod in windows explorer (My computer) but not in iTunes, and the ipod is mounted on a drive letter lower than the operating system.
    To switch your Ipod to a different drive letter:
    1. Connect your ipod to the desired usb 2.0 port.
    2. Go to the start menu and click "Control Panel".
    3. If you are in "Category view" (check the upper left where it says "Switch to classic view") switch to classic view.
    4. Double-Click "administrative tools".
    5. Double-Click "computer management".
    6. Under "storage" on the left, click "Disk Management", and wait for it to connect to the logical disk managament service.
    7. Your Ipod should show up in "volume" column; RIGHT click on it and select "Change Drive Letter and Paths..." from the pop-up menu.
    8. Click on the "Change..." button.
    9. Select a different drive letter from the pull down menu. (Pick a drive letter higher than the one your operating system .ie Windows XP.. is installed on. For example if Windows is on drive D:, then pick a drive letter E: or higher.)
    10. Click "Ok"
    11. Click "Yes"
    12. Restart the computer, and see if your Ipod will connect to iTunes!
    Dell Dimension 8200 Windows XP Pro

  • 2nd gen shuffle seen by windows, but not by itunes on other computers

    Hi Everyone..
    Im trying to help a friend out, I suspect his 2nd gen shuffle is hosed, but thought I'd confirm with others.
    He's had itunes and this shuffle for a while.. worked ok.  Stored it for a year or so, and now found that when we plug it into his laptop, Windows XP will see it as a usb drive (and I can transfer files onto it as a flash drive), but itunes doesnt see it.
    In mucking around with it for some time, I finally installed a fresh copy of Itunes over the existing one and when it restarted I was told the shuffle was in Recovery mode.. so I reset it from within itunes.  Upon restarting, itunes again doesnt see it.  I then downloaded the reset utility and tried that, again, doesnt see it.
    I installed itunes on my win7 desktop, my wifes 1st gen ipod touch is seen a-ok, but my friends shuffle is not.. again, I can use it as a flash drive on the win7 computer, but itunes does nothing.
    Is the shuffle toast?
    thanks,
    cakes..

    Not looking good if you ask me especially since the problem was persistent across two different PCs and the reset utility did not help.
    B-rock

  • User account seen in finder, but not in Accounts System Preferences!

    I just had a weird crash using Quicktime. When my Mac rebooted, it booted into a brand new user account (empty docs folder, clean desktop, etc.), but under the same name as my previous main user account.
    The old main user account folder can be seen in the Users folder, but not in the Accounts System Preferences.
    How do I get back to my previous main user account?

    This has happened to a few, not always their doing either...
    Return to default desktop, apparent "loss" of home directory...
    http://docs.info.apple.com/article.html?artnum=107854
    ChangeShortName 10.4 only...
    http://www.macupdate.com/info.php/id/16620
    But may I suggest first of all doing these steps...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

  • Files seen under Explorer but not under Music; making playlists outside Music

    My Zen Touch 2 sees some files only in the explorer but not under Music > Songs. I.e. I load an album into the right folder and Zen sees only the fourth, fifth etc. track under Music while seeing all under Explorer. As I can add songs to playlists only under Music, this effecti'vely blocks me from listening, What`s the... ehm, problem? Why can`t this piece of plastic see all the files?
    And second: Maybe there is a nicer way of making playlists than one by one in the device? I`ve heard some hardware Mp3/4 players cana ccept external playlists, but the help doesn`t mention this.

    QThanks but as this changes even within an album (tracks -3 not seen, later ones yes) I don`t think it is the problem of tags exclusi'vely. BTW, maybe there`s some way of making the Music window (program? folder?) display file names instead tags?
    Thanks for the playlist answer. Now`s just the problem of finding where WMP keeps them

  • 3rd Gen 40GB iPod click-wheel is seen by windows, but not Mac

    I just dusted off my old iPod after nearly a year of no use and coulfn't get it to be seen on my MacBook Air with iTunes 7.7. I tried it on my homebuilt PC running Win XP with iTunes 7.7 and it mounted just fine. I did a software update on it, plugged it in overnight to give it a full charge, then tried it on the Mac again. Still no dice. No crash or hang, just as if it didn't exist. But it (the Mac & iTunes)see my wife's and my iPhone just fine. I double-checked and it still shows up and works normally on the PC. I don't want to do a reset if I can avoid, as I have some music on the iPod that isn't on the Mac. It is on the PC, but, it's a hassle to get it across.

    I have a similar problem. I have not used my iPod in a few years. I recently bought a mac. The iPod syncs fine on the windows, but is completely unrecognized by my MacBook Air. I had to buy a USB connector because my iPod had only a firewire cable. Perhaps that's the issue? Disk Utility doe not recognize it. ITunes does not recognize it. In disk mode the screen still reads "OK to disconnect" after I plug it in. Any ideas? (I followed the Rs on the Windows where it's working fine...)
    I am abandoning my PC altogether and I am becoming addicted to podcasts. Getting this to work with my MacBook Air would satisfy my new addiction.
    Thanks,
    T

  • IPod is seen by Windows but not iTunes

    Ever since upgrading to iTunes V7.x (currently the latest version 7.3) my iPod does not show up in iTunes. I can access the iPod from Windows and open folders etc. My iPod is connected via Firewire and has worked fine in all versions of iTunes until V7. I tried uninstalling iTunes several times and reinstalling V6, but the iPod does not appear in iTunes.
    I've even tried using V6 to reset my iPod and then upgrade iTunes to V7, but I have the same problem.
    Before I resort to reinstalling my Windows OS to get iTunes to recognize my iPod, I'd like to know if there is a way to troubleshoot the device from the Windows-side, since I can't use iTunes V7 to reset the device.
    I'm using a 15GB iPod
    Thanks,
    Jim

    Have you seen this Apple help on your probelm?
    http://docs.info.apple.com/article.html?artnum=93716

  • IPod 40gig 4G seen in windows but not iTunes

    So this ipod is a couple years old and has worked flawlessly. I've never had an issue with itunes until now. When I upgraded to version 7 I started seeing weird behavior. It would only find the ipod intermittently. Once it found it I restored it to factory settings with the newest update and it worked fine.
    Then the newest update happened and suddenly I'm back to itunes not seeing the ipod. I've tired everything in the 5 step they tell you except reloading the ipod software. Which would be lovely to do but since its reintegrated in to itunes and itunes currently isn't finding the ipod... well you get the idea.
    Sometimes iTunes will pause as if its finding it, but then wont find anything. Windows however has no issue finding the ipod regardless of if I have it plugged in with firewire or usb 2.
    I've even reloaded my computer from scratch, and installed the newest itunes clean and still no difference. Again this didn't start happening until version 7 reared its ugly head.
    Anyone have any ideas?
    PC   Windows XP Pro  

    Have you seen this Apple help on your probelm?
    http://docs.info.apple.com/article.html?artnum=93716

  • Ipod is seen by computer, but not itunes

    My 40 gig ipod suddenly isn't seen by itunes, so I can't update my podcasts, music, etc. It shows up on my desktop though. My older 20 gig shows up and works fine. I just did the latest Itunes update hoping this would fix the problem, but it didn't. Apple are you listening, there are many who are having this same problem!

    First, try resetting your iPod using the two button combination.
    http://support.apple.com/kb/HT1320
    If you've already done that or it does not help, connect the iPod to your Mac. Run Disk Utility. The iPod should appear as a hard drive in the sidebar. Select it (the drive not the volume indented below) and go to the Erase tab. Note - Proceeding further will erase your iPod.
    Volume format should be +Mac OS Extended (Journaled)+. Name does not matter. Click the erase button.
    If this completes successfully, quit Disk Utility and run iTunes. iTunes will hopefully go through the initial setup screens. You should tell it NOT to sync and use the Restore button to put it back to original settings. Then you can sync it if you normally do so, or load it manually.
    Apple are you listening, there are many who are having this same problem!
    This is a user forum, but even if Apple was "listening," a 40GB iPod is a few generation removed from the currently in-production model...

  • Projects are seen in workspace but not getting displayed

    I have some Web dynpro, JEEE, Dictonary DCs and projects in workspace, but it is not getting displayed when I open NWDS.
    I have given the correct workspace path but still the Project explorer is blank
    Please help.
    (P.S. NWDS was shut down improperly.)

    Closing this thread

  • Calendar seen in iTunes but not in iPod

    Hi - I'm trying to sync my iCal calendars to my nano, but although iTunes sees all my calendars, the nano does not. The missing calendars are ones that have been created via a programme called Curio, which creates new iCal calendars according to 'to-do' events created in it. There must be something different about these calendars but I can not see what - they look & act like any other calendar in iCal except for the failed sync to the nano.
    Does anyone have any idea as to what might be causing this or how to resolve it?
    Many thanks

    Indeed. Spoke to support last night and they had me do that. Still not working. I'm convinced it's just a bad download and will call them again to see if they will just let me try it again.

  • IPod can be seen in iTunes but not charging

    I can view the iPod, sync music in Tunes but it doesn't fully charge.
    Any idea what the issue might be?
    Thanks in advance.

    Hey Venkat,
    The Delta Init is only for Initialization of the delta process, it doesnt bring any delta or data to the psa. for this you have to create ne more infopackage for Delta load and run this Infopackage then you can find the data in your psa. This is the normal mistake.
    Create a dtp for this infopackage as well using delta mode.
    I hope this helps, if u find more problems post me abt this.
    Assign points if it helps,
    -Harshal

Maybe you are looking for