Operation cancelled on SQL Developer still running on the DB

Using either the SQL Developer 2.1.1.64.39 or .64.45 versions when a DML statement (e.g. SELECT, DELETE, etc.) is executed and few seconds after cancelled before it finishs, the SQL Dev IDE shows as the operationwas cancelled, but it still running at the database level.
If you try to close the SQL Developer to cancell the operation, you will get a "Connection is currenly busy. Try again?", but you can only chose Abort and wait.
Regards,
ASCh

SQL Developer is certainly not just cancelling statements in the user interface - I can cancel a query that normally takes two minutes to run after five seconds and then immediately run a different query in the same connection and get the results (ie the cancelled query is no longer running in the database).
You are probably seeing the difference between the UI no longer waiting for the statement to complete and the statement actually completing in the database. Especially with DML the database needs to clean up from the cancelled statement, rolling back changes already made by the statement before it was cancelled. Even selects can allocate temporary space for sorting which would need to be cleaned up on cancelling the select.
I would not expect closing SQL Developer to do anything more to cancel the statement in the database than it has already done - SQL Developer has already told the database to cancel the statement and it is just taking some time for the database clean up after the cancelled statement.
theFurryOne

Similar Messages

  • Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
    tt2

  • I am currently running OS 10.6.8 on my iMac and plan to upgrade to OS Mountain Lion. Will MS Office 2008 for Mac still run on the new OS?

    I am currently running OS 10.6.8 on my iMac and plan to upgrade to OS Mountain Lion. Will MS Office 2008 for Mac still run on the new OS?

    Check compatibility for all your software
    http://roaringapps.com/apps:table

  • I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

    I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

    It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
    If space is an issue... use an external disk.
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • SQL Developer Data Modeler -Editing the Legend

    Hi,
    I have installed SQL DEVELOPER Version- 3.0.04. I am creating the data modeler diagrams(Relational and Logical) using the SQL Data Modeler.I would like to know whether the following features are available in this version or the latest version of SQL DEVELOPER.
    1) Remove the existing legend attributes (Say:Author,Created on,Changed By etc) for both relational and logical diagrams.
    2)Add new attribute to the Legend .(Say: A description for the Barker notation used in ERDs .)
    Regards
    Anupam
    Thanks in Advance
    Edited by: 898511 on Nov 22, 2011 3:34 AM

    I answered my own question. In case anyone doesn't already know. Easy enought...
    right click on the diagram
    -> unselect "Auto Route"

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Why does my iMac display keep shutting off?  Computer still running in the background.  I've tried unplugging and restarting, to no avail.

    Why does my iMac display keep shutting off?  Computer still running in the background.  I've tried unplugging and restarting, to no avail.    The computer is well out of warranty - about 7-8 years old, running 10.6.8

    Checked.... the settings had not been inadvertently changed, but I did move the scroll and reset them back to the original.   Hasn't shut off again.... yet.   Will re-post with follow-up one way or the other.   Thanks.

  • My iMac 27inch screen keeps going black but everything is still running in the background? please help

          My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

    Hello @DesCherryBomb,
    I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • How to find the SQL Server Instances running across the given activer directory domain?

    How to find the SQL Server Instances running across the given activer directory domain?
    I have though of OSQL -L , Microsoft Assessment and Planning ( MAP ) tool and SQLPing3 (SQLSecurity) might help me.
    I would appreciate if there any other way of finding the SQL Servers / Instances running across the given active directory domain.
    Sivaprasad S
    http://sivasql.blogspot.com
    Please click the Mark as Answer button if a post solves your problem!

    Dear ,
    Very simple u find all instances through the customized sp which is get all details about inventory. Like i put the sp bellow. This is without any tool. 
    USE [master]
    GO
    /****** Object:  StoredProcedure [dbo].[DBStatus]    Script Date: 08-01-2015 19:46:11 By Damodar Patle Sr. DBA Mumbai India ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER PROCEDURE [dbo].[DBStatus] 
    AS
    SELECT 
    SERVERPROPERTY('servername') AS ServerName,
    ConnectionProperty('local_net_address') AS 'local_net_address',
    ConnectionProperty('local_tcp_port') AS 'local_tcp_port',
    CONVERT(VARCHAR(25), @@VERSION) as  VERSIONSQL,
    SERVERPROPERTY('ErrorLogFileName') AS ErrorLogFilePath,
    database_id,
    CONVERT(VARCHAR(25), DB.name) AS DBName,
    CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'status')) AS [Status],
    CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'Recovery')) AS [Recovery_Model],
    create_date as DBCreate_Date, --physical_device_name,
     (SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS DataFiles,
     (SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS [Data MB],
     (SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LogFiles,
     (SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS [Log MB],
     (SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS MDF_File_Location,
     (SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS  LDF_File_Location,
       user_access_desc
       FROM sys.databases DB
       ORDER BY dbName, [Log MB] DESC, NAME

  • SQL Developer 3.0 error: The parameter is incorrect

    I am running a virtualized the SQL Developer 3.0 on windows XP. Today I noticed that there was an error when I created a connection profile.
    Source: oracle.dbtools.raptor.navigator.folders.DatabasesFilter
    Message: The parameter is incorrect
    Despite of the error, I was able to connect to the target database and had no problem with any database operations. The newly added connections were not saved upon exit. Any idea?

    In another post on a different subject, Gravenstein posted the following:
    <quote>There aren't very many files that RoboSource Control excludes. Let's see, a quick tally of my RH6 webhelp project shows the following to be excluded:
    * projectname.cpd
    * projectname.pss
    * projectname.hhp
    * projectname.trl
    * ehlpdhtm.js
    That's not very many, but the consequences of adding them to RSC are severe--things get very messed up, very fast. That's why I always let RH control the upload into RSC. Not an option if you're not using RSC, I realize.
    </quote>
    I don't work with source control but I would imagine that list applies to other source control programs and to RH8.
    See www.grainge.org for RoboHelp and Authoring tips

  • SQL developer UI disappearing off the desktop

    Hi....
    Anyone run into this? I'm running 32 bit XP. When I have really lengthy queries or updates that I execute via sql developer, the UI will sometimes disappear from my desktop, task bar, etc. etc. If I run Task Manager sqldev is still running as a process, but isn't visible in the 'Applications' tab. Everything seems to be ok once the long op completes.....it returns to a visible state and behaves normally.
    Is this expected behavior?
    Thanks in advance,
    Bob

    Drawing issues are typically due to other soft and drivers. At least make sure you have the latest drivers for your video card.
    The latest JDK may also have improvements.
    Generally, disabling Direct Draw in the \sqldeveloper\bin\sqldeveloper.conf avoids all there issues:
    AddVMOption -Dsun.java2d.noddraw=trueHope that helps,
    K.

  • SQL Developer 2.1 removes the stored password in SVN Application Data

    Hello everybody
    SQL Developer is a great Tool and I use it together with the SVN Versioning System. I also use TortoiseSVN on my Windows XP Operating System, that's why I found out that either the SQL Developer or its SVN Extension has a bug.
    I have installed the latest SQL Developer 2.1.0.63.73 and the extension "*Versioning Support for Subversion* 11.1.1.2.36.55.30".
    Both Tools the SVN Extension for SQL Developer and the TortoiseSVN save Authentification Data automatically in the same Folder "C:\Documents and Settings\UserXYZ\Application Data\Subversion\auth\svn.simple\" into some Files.
    When I use TortoiseSVN, the password can be stored in those mentioned Files. That's very useful, so I don't have to enter my password every time I perform a SVN command. But when I later use SQL Developer and update/commit some file, the password will be removed from the above mentioned Files, even though my Password is stored in the SQL Developer's Subversion Navigator inside the Connection Setup of my Repository.
    I would be happy to get some feedback from your point of view. Are there other people who have the same problem?
    I turned already to google, but I haven't found a hint that it could be something you can configure in some properties.
    Thanks in advance,
    Ben

    In the meantime I found the solution:
    just add those two lines to the *%appdata%\Subversion\config* File
    store-auth-creds = no
    store-passwords = yes
    It looks like the SVN Extension in SQL Developer has different Default Values for the properties than TortoiseSVN has.

  • How do I get values into a vi from a subvi while the subvi is still running within the vi?

    Hello
    This is my problem. I have a subvi that runs an experiment. At different point in the experiment different instruments are on or off and I have a boolean array display this info. It is updated at various points of the experiment via a local variable. That works fine. Here is the problem though. I run that subvi from a main vi program (that runs it several times for several experiment cycles). I would like to pass the status of that array onto the mainvi to display there too. The problem is that the array in the main vi is not updated until the subvi is done running and thus displays only the array status at end of experiment (instead of changing
    as the status changes within the subvi). I tried using a global variable to write to it in the subvi every time there is an update, and read from it in the mainvi, but that doesn't work, it still displays just the status at the end of the subvi execution. Does anyone know how to make this work, or if there is a workaround this? Thanks.

    If you have LabVIEW 6i, you can update indicators of a calling VI from
    a SubVI, while the subVI is running.
    In your case you need
    1) an indicator on the main VI panel to display the boolean array
    2) to pass a reference to that indicator to the subvi when you call it
    3) to use this reference in the subVI, connect a property node to it and
    write the values to be displayed to the 'value' property of this node
    If you don't have version 6, you can write the values to be displayed to
    a global and display this global in the main VI from within a while loop
    which must run in the main VI in parallel to the running subVI.
    It's more complicated, since you need a mechanism to gracefully shut
    down the while loop after subVI finishes. You could do this with
    another global control boolean which is not displayed but just connected
    to the repeat terminal of the while loop. Don't forget to put a 'Wait' of,
    say, 50...100 msec in that while loop.
    -Franz
    zkajan schrieb:
    > Hello
    > This is my problem. I have a subvi that runs an experiment. At
    > different point in the experiment different instruments are on or off
    > and I have a boolean array display this info. It is updated at
    > various points of the experiment via a local variable. That works
    > fine. Here is the problem though. I run that subvi from a main vi
    > program (that runs it several times for several experiment cycles). I
    > would like to pass the status of that array onto the mainvi to display
    > there too. The problem is that the array in the main vi is not
    > updated until the subvi is done running and thus displays only the
    > array status at end of experiment (instead of changing as the status
    > changes within the subvi). I tried using a global variable to write
    > to it in the subvi every time there is an update, and read from it in
    > the mainvi, but that doesn't work, it still displays just the status
    > at the end of the subvi execution. Does anyone know how to make this
    > work, or if there is a workaround this? Thanks.
    Franz Josef Ahlers
    Section Semiconductor Devices
    Physikalisch-Technische Bundesanstalt
    Bundesallee 100
    D-38116 Braunschweig
    phone: (+49) 531 592 2410
    fax: (+49) 531 592 2405

  • SQL Developer is not exporting the time part of date data types.

    I need to export data from a table using sql developer. The column is a date data type but when I export the data to a csv, xls or an sql file with insert statements, sql developer only includes the date part without the time.
    Please kindly advise.
    Thanks,
    Erika

    What is your 4 digits Oracle version ?
    What is your SQL Developer version ?
    With Oracle XE and a schema named TEST I have:
    select * from t
    X                        
    04-FÉVR.-2010 21:24:40  If I use Tools/Database Export with all default settings with SQL Developer 2.1.0.63 I get following SQL file:
    --  Fichier créé - jeudi-février-04-2010  
    --  DDL for Table T
      CREATE TABLE "T"
       (     "X" DATE
    --   DATA FOR TABLE T
    --   FILTER = none used
    REM INSERTING into T
    Insert into T (X) values (to_timestamp('04/02/10 21:24:40,000000000','DD/MM/RR HH24:MI:SS,FF'));
    --   END DATA FOR TABLE T
    ---------------------------------------------------Edited by: P. Forstmann on 4 févr. 2010 21:26

  • After closing the AIR application, it still runs in the Task Manager

    Hi,
    I am very new to AIR application. I have made a product demo
    application in CS3 using AS2 and just for the sake of testing the
    AIR, I published an AIR installer of that application.
    Every thing works as it should be but I am facing one
    problem, when I close the application using the close button. It
    disappears from the desktop but when I checked the TaskManager...It
    still running there. And using large CPU resource (around 50%).
    Does any one know the reason behind it?....I also tried to
    installing other AIR application (made by other users) but that
    application is closing correctly..

    You might set the flag:
    NativeApplication.nativeApplication.autoExit
    to false?
    Otherwise your app. should exit.
    -ted

Maybe you are looking for