"Operation cannot be completed as there is no video"

Ah, but there is -- HV20 connected to firewire, controllable from within FCE. Can do everything BUT capture, either Capture Now or marking a clip and "Capture Clip." I did shoot it in HD and am outputting DV to match so B-roll somebody else shot.
What's going on, do you think?
Thanks,
/john

Not from your description. W can't see you're computer from here, so you'll have to help us out a bit more.
Start with this:
See if this helps
http://www.fcpbook.com/Video10.html
Also it might help to answer these generic questions:
Be as exact as you can.
What settings are on the media? Did you shoot in 12-bit (32K) or 16-bit (48K)? Are you in North America? Did you shoot in standard format or anamorphic (widescreen)?
What settings are you using in Final Cut? Depending on what you answer above will determine what settings you use.
What computer are you using?
What drives? Any external drive or device connected?
What camera or deck?
How's everything connected? Is the camera connected through an external device or directly into the computer?
What version of the application are you using?
What version of the OS?
What version of QuickTime?

Similar Messages

New problem again, This operation could not completed as there's no video

I don' t understand what is the problem, I work with FCP 6.0 and Quicktime 7.4.1 very well until today, when I tray to capture from DV devices ( note that the capture window says PREVIEW DISABLED , but I can remote the camera, mark tc in , out FFW REW etc, message VTR IS OK) The capture is aborted with this message THIS OPERATION COULD NOT COMPLETED AS THERE IS NO VIDEO, when I tray to capture from JVC PRO HD there is no problem. ANY IDEAS????? I'm not work whit another FCP version because with other version there is a problem with JVC PRO HD DEVICES . I note that I'm not the only one with this problem, another curiosity is that at this mooring I capture a tape without a problem but with the second tape start the problem when I thread the tape. Who is possible that the problems are like a miscellanies problem. In the system profile the Camera and vcr dv appears connected to the mac. The fire wire is ok.
<Edited by Moderator>

Hi of course I use the correct easy setup,Ii tray with different cameras, vcr's, vtr's, dv , Dvcam, I tray with different fire wire etc. Note that "IMOVIE" capture material without problem, same tape, this problem is affected to other people, included me , but for week i no have this problem with FCP 6.0 and Quicktime 7.4.1 this problem starting to day in the middle of the batch capture, the first tape was captured , but in the second tape start the message, WAITING FOR TIME CODE, THE DEVICE MUST SET IN VTR MODE, of course that this two things are ok, and appears then message "This operation could not completed as there's no video" Note that quicktime pro is unable to capture material from DV device too. Imovie work OK with the same camera and vtr and the same tape. The problem is quicktime and FCP.
http://discussions.apple.com/message.jspa?messageID=7418664#7418664
http://discussions.apple.com/message.jspa?messageID=7390713#7390713
http://discussions.apple.com/message.jspa?messageID=7365555#7365555
http://discussions.apple.com/message.jspa?messageID=7344941#7344941
http://discussions.apple.com/message.jspa?messageID=7335764#7335764
http://discussions.apple.com/message.jspa?messageID=7335763#7335763

Error message during copy of new version, it says the operation cannot be completed because the item foxfire is in use.

During downloading of 7.0 Foxfire, during the copy I get an error message that says the operation cannot be completed because the item Foxfire is in use.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

The operation cannot be completed because it is in use

i have a macbook with yosemite running.I also have a wdtv live with a 1tb hdd on it.I could transfer files from my mac to the hdd over wifi with no problem till i upgraded to yosemite.It tells me when i transfer a large file the operation cannot be completed because it is in use.Small files can be transferred with no problem at all.When i transfer them through direct usb to the hdd no problem at all.What can be the solution to this problem???

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Installed update of Firefox, but cannot drag into applications folder, it indicates that "The operation cannot be completed because you do not have sufficient privileges", so how can I complete the install?

I try to drag the app into the applications folder where an old app of firefox exists and it asks me if I want to replace it and after i say yes it gives me the operation cannot be completed message.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

When I try to upgrade to the newer version of Firefox, this is the message I get (I am using OS 10.4.11): The operation cannot be completed because you do not have sufficient privileges for some of the items.

I have recently dropped Earthink as me dial-up provider. I now am using Virgin Mobile Broadband2GO. I was using Safari. I am now using Yahoo! Mail Plus. It suggested I switch to Firefox. I had an older version of Firefox (2.0.0.6) and started using it. It suggested I needed to upgrade because many of the newer web sites wouldn't work well on this older version. I downloaded the newer version and proceeded with the installation and it would tell me this: '''The operation cannot be completed because you do not have sufficient privileges for some of the items.''' I have re-downloaded and tried it again two more times. I haven't a clue what that means or what to do about it.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Bridge CC will not open. Reads "Error: The operation cannot be completed"

Hello,
I just recently downloaded Creative Cloud. I am working on a Mac OSX 10.9.5 and I downloaded Creative Cloud to use both Photoshop and Bridge. Photoshop opens and is working however, Bridge opens for 1 second and then give me the message, "Error: The operation cannot be completed", and then shuts off.
I uninstalled the program and re-installed but still the same problem. Any suggestions would be appreciated.

Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.

Term Store issue: The operation cannot be completed. The term store may be unavailable.

Hi,
Suddenly today, our term store started displaying the above error. I first noticed it when I was trying to view a managed metadata column of a list. I got the following error - "There was an error processing the request". When this happened more
than a couple of times, I tried to open the Term Store of the site and encountered the following error message - "The operation cannot be completed. The term store may be unavailable.". I've checked and the permissions are in place as outlined by
this article. However, the issue persists. The term store was working fine previously without any issues.
Any suggestions to resolve this will be greatly appreciated!
Thanks in advance,
Vineeth

check this one http://social.technet.microsoft.com/Forums/sharepoint/en-US/e600edef-7a63-4ee1-bd45-3e91f2acbf81/managed-metadata-failed-to-read-from-or-write-to-database-refresh-and-try-again-if-the-problem?forum=sharepointadminprevious
if you not able adding
yourself try from Central admin.
Thanks -WS SharePoint administrator, MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog *Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.*

Whille copying error ""The operation cannot be completed because you do ...

Hi there I read a lot of post regarding this problem, I have some files that I copied from a USB drive that I can't copy since I have the error "The operation cannot be completed because you do not have sufficient privileges for some of the items." when I try to copy them to another disk (trying different disks there is no difference)

Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.

The operation cannot be completed an item with the name "...already exists

Hello mac users,
please help me... I can't copy to Applications any larger *.app file. I try drag Ableton (live.app ~120mb) or Mailplane.app (76mb) to Application dyr, but I saw message: "the operation cannot be completed an item with the name "..." already exists". But i had never install this apps before.

So, you are dragging the application from it's folder on the disk image directly to your Applications folder. If that's the case and you still get this message, have you ever installed that application before?
If it was installed at some time in the past, look in /Library/Receipts to see if there is a .pkg or a .bom for it. If you find one, delete it and try again.
EDIT: I'm downloading ableton now to see what's going on... OK no problems here. I dragged it to my Applications folder and now have a folder named "Live 7.0.10 OS X" in my Applications folder.
Perhaps you are looking for it under the wrong name?
-mj
Message was edited by: macjack

I receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.

I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.

Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer.

Capture Error- Operation could not be completed as there is no video.

Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?

So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that.

A volume failed to mount/Operation cannot be completed

We bought a MacBook on the weekend. Our Apple concierge insisted that we can keep our music, videos and photos on our Windows XP desktop and "share" the files on the Mac--in other words, we can pull down what we need to edit or save on the Mac as need be.
We've set up the shared directories on the Windows machine, renamed the Workgroup to match the Mac and disabled the firewall. We've "connected to server" using Finder and can see the two shared directories we've set up.
But when I click on either one of them, I get an error message: "A volume failed to mount. The volume "Mac" could not be mounted."
After some time of being on the network, I see a Shared directory in Finder with my PC. If I click on the icon, the title bar says: "Connected as: Guest". The window displays the same two directories as above but when I click on one or the other I get an error message: "The operation cannot be completed because the original item for "Mac" cannot be found."
I've called Apple technical support and the agent's response was: I don't think you can do that. Just copy your files to the Mac using DVDs.
Any ideas? We don't want to have to transfer a lifetime of photos, video and music to our laptop--we want to use the XP desktop as our hub.

I'm having the same trouble. From an Intel Mac Mini running 10.5.3 I've been able to access smb shares fine on an old PC running XP pro. These are shared volumes on external drives on the PC. I can still access them fine from an old PowerBook G4 running 10.5.3, but while I can see computers on the network, if I try to connect to a share on the computer I get the message "the operation cannot be completed because the original item for <share name> cannot be found". If I try to mount it via a shortcut, I get the message "A volume failed to mount. The volume <share name> could not be mounted.
In the console, I'm seeing things like:
6/2/08 10:45:01 PM com.apple.coreservicesd[58] NOTE: Using non-mach-based version of client -> server communication, via direct function calls.
but I don't know if that has anything to do with this or not.
Has anyone heard of a fix for this?
Thanks,
Mark

"the operation could not be completed as there is no video"

Hi. I've been logging and capturing without incident for weeks now, from my JVC BR-DV3000 deck to final cut 5. Device control still works fine, so i know final cut is recognizing the deck, but all of a sudden when I set it to capture i get an error message that reads: "the operation could not be completed as there is no video". I checked all my connections and settings, refreshed external viewing options, and turned everything off and on again. And I just went back to see if it was the same for tapes I have already captured successfully in the past, and i get the same error message, so I know it's not the tape.
Has anyone ever gotten this message in his or her log & capture window? Thanks...

I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

This operation could not be completed as there is no video - capturing PAL

Ok, I tried all the suggestions I've seen here. I have a Sony FX-1000 and I'm trying to capture a PAL mini-DV tape (which is easily read and played on this camcorder) using Final Cut Pro - latest version. The connection is iLink / Firewire 800 and has been used to capture many NTSC videos in the past. I have tried all settings on Final Cut Pro - under Capture Settings - to no avail.
In all cases, "Preview Disabled" is displayed in the color-bar window. However, the playback controls (rewind, play, ff) all work fine using the buttons under the window. The miniDV plays fine on the camcorder - both picture and sound.
After starting the playback, and pressing "Capture Now", I get a solid black window indicating that the capture software is "waiting for timecode", even with the tape obviously playing. After about 2-5 seconds, I receive the error message "This operation could not be completed as there is no video".
I've tried several computers, several cables (both Firewire 400 and 800) - as well as all the PAL settings and FC Pro and FC Express 4.0. So, any suggestions? I could use some help.
Thanks

Solved the problem. I used an old Sony Handycam DCR-HC28 with Firewire connection and used Final Cut Express with the settings: PAL, DV-PAL DV Converter in Easy Setup.
I was NOT able to control the Handycam with this setting but I could start the capture and then press "play" on the Handycam and it captured. Strange way to solve the problem. Hope this helps someone.
BTW - the HDV FX-1000 did not work this way. I guess the cheap camcorder works better at this!
Thanks to all for the help!

"Operation cannot be completed as there is no video"

Similar Messages

Maybe you are looking for