Operation ' Change Attribute TSTATE ' could not be carried out

Hi All,
When I attempt to compress an infocube I get the following error messages:
@5C\QError@ Operation ' Change Attribute TSTATE ' could not be carried out for Request 1114486
@5C\QError@ Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '255'
I checked the request 1114486 in infocube and saw that its status is green however the overall status in the load monitor was "deleted".
How can I fix the problem with this request ?
It is a very old request and it was already uploaded to several other targets.
Thanks in advance..
Berna

hi,
It can be due to large data volume which might require more system resources then usual, see if there is any dump related to this in ST22, Also check whether any request is currently running on cubefor data loaded to cubeor getting load to further targets
try compression for less requests say 3 or 4, see if it works or not
hope it helps
regards
laksh

Similar Messages

Operation ' Change Attribute TSTATE ' could not be carried out for Request

hi,
i am unable to delete the request Id from DSO. and when i checked that, it says request is partially activated(error occured during the activation)
and when i checked the logs i got the following error messages:
Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 361'
i even thought it was BASIS issue but it was not.
due to this error the process chain is failing daily
kindly help
regards
laksh

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

Operation ' Modify attribute TSTATE ' could not be carried out for Petition

Hi Experts, when try compress a infocube appear this error
Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx
The petition status is green.
Any idea?
Enrique.

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

PAYMENT PROPOSAL COULD NOT BE CARRIED OUT

I did payment run program for one vendor F110 i have 3 invoice. within this invoice one invoice i did payment block at the time of payment proposal in F110 , the remaining two i cleared and i got all result after some days according to the next payment run date i am trying to do payment run F110, At the time schedule proposal the error system showing "PAYMENT PROPOSAL COULD NOT BE CARRIED OUT". Now i need clear that invoice wht i do through F110.....
Moderator: Please, use proper forum and don't post in CAPITAL letters

Hi,
Please go to Su01 enter your user ID click on default Tab and in output Device field please enter Output device and then re-run the proposal again.
Hope it helps.
Br,Vivek

F110 - Message Payment proposal could not be carried out

Hi All,
Need help..
In the F110 Payment proposal when executed is showingh error
Payment proposal could not be carried out.
The log says
" Overlap with payment run 25.02.2009 DOREE     .... the execution of the payment program is terminated     .
I checked the payment proposal for 26.02.2009 and for that no parameters have been entered and it shows status as " No parameters entered as yet ".
But when I went to menu path , there is no option to delete this run.
How do I getaway with this previous run which has problems..?
Regards,
Jaya

Hi ,
table "reguh" doesn't have any entries pertaining to this payment proposal.
It is just that parameters are entered and proposal is being run.
proposals are not yet created. I believe in the process it is hitting an error and then coming out saying
proposal canot be carried out.
Tried the previous solution by having the additional log parameters and all.
But still log only shows :
Log for proposal run for payment on 26.03.2009, identification DORE
Overlap with payment run 25.02.2009 DOREE
... the execution of the payment program is terminated
End of log
How to delete this payment run 25.02.2009 DOREE
thanx
Jaya

Paymen Proposal Could Not Be Carried Out

Hi to all
I am posting an expenditure transaction by using the t code RVND for yourself cheque creation with out vendor creation and one entry is generating in background.
the enry is
Expense a/c DR
clearing a/c for payment CR
Then after i am running Payment Program.At that time i am getting the message as "Payment proposal could not be carried out"
Can you help me.
Thanks&Regards
Raja

Hi,
F110 is meant fro the payments we are supposed to make if we know who the vendors is, otherwise to whom will the system pay money, how will the system under stand to whom it should be paid, more over all the credit purchases we have made from the vendors or advance paynments from us to the vendors will be processed .
Clearing account is not the payment made through bank, hence it is showing you the errors.
Thanks,
Shilpa.
Edited by: ashilpa54 on Jan 12, 2011 4:55 AM

Results recording could not be carried out

Hi all ,
You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported .
where can i find the setting in the material master so that i can make result recording .
thanks
ksr

Hi
Go to mm02>Qm view->sleect inspection type--->click on check char & Inpsect with task list
then result recording from next lot will be possible
Regards
Sujit

TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

Hi All,
We have snapshot replication . Job is failing in between due to below error.
Error messages:
The process could not connect to Subscriber 'XX:SD'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084)
Get help: http://help/MSSQL_REPL20084
TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
Login timeout expired (Source: MSSQLServer, Error number: HYT00)
Get help: http://help/HYT00
Please suggest

Hi Khushi，
According to your description, your snapshot replication job fails and you come across the error related to TCP Provider. Based on my research, the issue could occur as the following two situations.
1. OS runs out of memory for TCP buffers. When people use the two switch: the /PAE switch in the c:\boot.ini file and the /3gb switch in the boot.ini file. If the applications require many OS resources, such as by opening many TCP connections, this can cause
the OS to run out of memory for resources like TCP buffers.
2.OS runs out of available TCP “ephemeral” ports. When the client machine is opening many TCP connections and is running Windows Server 2003, Windows XP, or any earlier version of Windows, it may run out of TCP “ephemeral” ports.
To work around the issue, please follow the two solutions as below.
1.Remove the /3gb switch from c:\boot.ini. The root problem in this case is memory pressure on the OS, so removing the /3gb switch will give more memory to the OS and will alleviate this problem.
2.Make more ephemeral ports available following the steps in the article:
http://support.microsoft.com/kb/196271
For more information about the process, please refer to the article:
http://blogs.msdn.com/b/sql_protocols/archive/2009/03/09/understanding-the-error-an-operation-on-a-socket-could-not-be-performed-because-the-system-lacked-sufficient-buffer-space-or-because-a-queue-was-full.aspx
Regards,
Michelle Li

Attribute #MX_MSKEYVALUE_DN could not be found Self Service Password reset

Hi,
I use NetWeaver 7.02 and IDM 7.2
I've just created the Self Service-Task Password Reset.
If I call the page http://<host>:<port>/idm/pwdreset I get the following error message:
Attribute #MX_MSKEYVALUE_DN could not be found
DE: Attribut #MX_MSKEYVALUE_DN konnte nicht abgerufen werden
The attribute MSKEYVALUE is available in my Identity Store.
The Task for "Edit authentication questions" is available.

Hi Chris,
I use NetWeaver 7.00 SP14 and IDM 7.2 SPS 3 (tried IDM 7.1 before, but had same error) on Windows Server 2003 SP2 with an Oracle DB 10.2.0.1
The IDM is working fine except the PwdReset Application. Maybe it has to do something with the Anonymous User?
Executing SELECT * FROM MC_LANGUAGE_TRANSLATIONS WHERE LANGKEY = '#MX_MSKEYVALUE_DN'
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=AR
LANGIDSTORE=1
LANGVALUE=?????? ??????
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=BG
LANGIDSTORE=1
LANGVALUE=???????? ??
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=CA
LANGIDSTORE=1
LANGVALUE=Identificador unÌvoc
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=CS
LANGIDSTORE=1
LANGVALUE=JednoznacnÈ ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=DA
LANGIDSTORE=1
LANGVALUE=Entydig ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=DE
LANGIDSTORE=1
LANGVALUE=Eindeutige ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=EL
LANGIDSTORE=1
LANGVALUE=???ad??? ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=EN
LANGIDSTORE=1
LANGVALUE=Unique ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=ES
LANGIDSTORE=1
LANGVALUE=ID unÌvoco
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=FI
LANGIDSTORE=1
LANGVALUE=Yksiselitteinen tunnus
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=FR
LANGIDSTORE=1
LANGVALUE=ID unique
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=HE
LANGIDSTORE=1
LANGVALUE=????? ??????
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=HR
LANGIDSTORE=1
LANGVALUE=Jedinstveni ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=HU
LANGIDSTORE=1
LANGVALUE=EgyÈrtelmu ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=IT
LANGIDSTORE=1
LANGVALUE=ID univoco
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=JA
LANGIDSTORE=1
LANGVALUE=?? ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=KO
LANGIDSTORE=1
LANGVALUE=?? ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=MX
LANGIDSTORE=1
LANGVALUE=Unique ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=NL
LANGIDSTORE=1
LANGVALUE=Unique ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=NO
LANGIDSTORE=1
LANGVALUE=Entydig ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=PL
LANGIDSTORE=1
LANGVALUE=Jednoznaczny ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=PT
LANGIDSTORE=1
LANGVALUE=ID unÌvoco
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=RO
LANGIDSTORE=1
LANGVALUE=ID univoc
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=RU
LANGIDSTORE=1
LANGVALUE=??????????? ??.
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=SH
LANGIDSTORE=1
LANGVALUE=Jedinstveni ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=SK
LANGIDSTORE=1
LANGVALUE=JednoznacnÈ ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=SL
LANGIDSTORE=1
LANGVALUE=Enoznacen ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=SV
LANGIDSTORE=1
LANGVALUE=Entydig ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=TH
LANGIDSTORE=1
LANGVALUE=ID ?????????
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=TR
LANGIDSTORE=1
LANGVALUE=Benzersiz tanitici
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=UK
LANGIDSTORE=1
LANGVALUE=?????????? ?????????????
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=ZH_CN
LANGIDSTORE=1
LANGVALUE=????
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=ZH_HK
LANGIDSTORE=1
LANGVALUE=?? ID
LANGKEY=#MX_MSKEYVALUE_DN
LANGCODE=ZH_TW
LANGIDSTORE=1
LANGVALUE=?? ID
Kind Regards,
Tobias

"This document could not be checked out." SharePoint 2010 checkout action using IE8

I am setting up a two-server farm, and most everything works, except the checkout action for a document. This problem occurs in both site collections, one of which requires checkout, and the other does not.
Here are the options I've tried:
Snow Leopard, Firefox 3.0.1 - works
Snow Leopard, Safari - works
Win 2003, IE 7 - works
XP, Firefox - works
XP, IE 8 - "This document could not be checked out. You may not have permission to check out the document or it is already checked out or locked for editing by another user."
In IE8, I am able to open a document as read only then use the button presented by Word to check out the document. I cannot use that as a workaround, as not all users have a version of Office that will allow checkout in that way.
Checkin works fine. I need to resolve the checkout error.

I was having the same problem mentioned here. I noted that this problem only appears when I use the FQDN in the URL ex 'http://hostname.domain.com/default.aspx'. If I access the Sharepoint site using the URL 'http://hostname/default.aspx', then
I do not have any problems checking files in or out.
I ran into this same error pattern when trying to do a document edit (library is set to force a check out), or do a direct check out via the ribbon menu or item context menu. Oddly enough when we would use the 'Edit Properties' ribbon button (which forces
a check out) we did not get an error and the document's status would change to 'checked out'. Below are the two messages we would receive when trying to do a check out:
IE error message - "This document could not be checked out. You may not have permission to check out this document or it is already checked out or locked by another user." - Click OK
IE Error message - "The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document." - Click OK
After trying several different suggestions I realized that I wasn't having the problem when I was accessing the site locally via FQDN but only when I was using the Public Site URL (via https). Turns out we were getting the error because we did not have
an AAM currectly setup. Once I changed our AAM for the Internet zone with the Public URL value instead of the FQDN the error went away.
Hope this helps anyone else trying to track this down. Oh and this was SP2010 w/SP1 (Patch version 14.0.6106.5001) on Win2008 R2 with clients running both Win7 and WinXP using IE8.

Availability check should not be carried out in Quotation VA21

Hi,
While creating the quotation we want that availibility check should not be carried out when user enter the material code on VA21 screen, as per the material lead time system should directly set the delivery schdule date, as in many cases if some other user is working on the same material then system save the quotation with confiirm quanity as zero in the schdule line, thsi we want for only one lant. what setting can be made for this.
regards,
zafar

how to know all the categoru which are applicable in quotation
For this, first you need to identify what item categories are assigned to quotation which you can find in VOV4. Next for these item categories, you need to list the relevant schedule line categories from VOV6
G. Lakshmipathi

My iphone 4s could not deduct carrier network, it happend all of a sudden, please help me

hi, My iphone 4s suddenly could not search for carrier network. i tried to restore netwrok settings, restored complete mobile, changed network provider but nothing worked. Anyone with same experience advise whether it can sorted or not??

My fiancé started experiencing the same problem yesterday. I was able to solve her issue by creating a forwarding rule within her icloud prefrences.
Log into: www.icloud.com
Click the mail icon
Click the cog wheel in the upper right hand corner of the tool bar
Select "Rules..."
Click "Add a Rule..."
Select and fill in the following information so that the rule says:
"If a message 'is addressed to' [email protected] Then 'Forward to' [email protected]"
Click done. (Obviously, type your actual email addresses in the address bars.)
Unfortunately, you won't receive any email that was sent prior to creating this rule, but you should receive all new email.

Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work

See:
Trouble installing iTunes or QuickTime for Windows

Authorise Change request action could not be successfully executed

Hi Gurus,
I have done the customization in the sdcr actions. twice i have checked the configuration. i hope all the settings are correct.
But when I try to execute the action in crmd_order (authorise change request), It's not triggering any thing.
I have done the below
1) copy the sdcr profile to zdcr profile
2) added the new status profile in the desired status
3) Copied the action and added my action
4) Defined the condition
Can you please help me to resolve the issue
Thanks & Regards
Venkat

Hi
This might help
[Re: CHARM: No Actions are Displayed|Re: CHARM: No Actions are Displayed]
Thanks,
Jansi

Scheduling can not be carried out

Hi Gurus,
i am facing some problem in scheduling of production orders,during creation of production order system gives an error message "No reqmts/caps exists or not relevant
scheduling". I have already defined the capacities in capacity header tab page and marked relevent to finite scheduling indicator.
msg no -CY 298
chandan sood

Hi Jiual,
i have maintained the following settings for scheduling;
1.OPJK : Capacity Availability Check ,Over all profile.
2.In OPU3 : On Detailed Scheduling tab i have maintained SellD,Generate Capacity tab check box ticked,Scheduling Ticked.
3.OPCG: Define operation Control key , i have ticked the Scheduling check box ticked.
4.CA02 capacity header the active version 1
5.relevent to finite scheduling check box ticked on capacity header tab page of work centre.
6.shift timings on capacity header tab page of workcentre.
7In opu5 combination of plant, order type and production scheduler is maintained.
still scheduling is not carried out.system proposes the same time and date as provided in basic finish date for backward scheduling.
regards
chandan sood

Operation ' Change Attribute TSTATE ' could not be carried out

Similar Messages

Maybe you are looking for