"Operation could not be completed. Operation not permitted" (NSPOSIXErrorDo

Other browsers work. Trashed preference plist.
Safari can't load any web page.

I have this very same issue after installing Safari 5.1. I've deleted and re-installed, repaired permissions, and tried it with the Guest account, but no joy.
All other browsers work. What-the-heck!?!?

Similar Messages

Software updates 10.74 returns "the operation couldn't be completed. operation not permitted"

software updates 10.74 returns "Failed to check for updates the operation couldn’t be completed. operation not permitted"
On my MacBook Pro 10.74, I've been reading for hours and can't find anything to explain it. Has anyone else come across
this and have a solution??

Hi,
There is also this link
http://support.apple.com/kb/DL1600 Delta download
Delta Variation for "OS X Mountain Lion 10.8.2 Update for 13"Macbook Pro with Retina Display, 21.5" iMac (Late 2012)Mac mini (Late 2012)"
http://support.apple.com/kb/DL1603
Combo Version (OS X 10.8.1 and 10.8.2 in this case)
http://support.apple.com/kb/DL1581
9:05 PM Friday; November 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

PS 3: The operation could not be completed. Not enough space.

Pictures are not shown in the small window in Bridge, and if I click on a thumbnail, it opens CS with the message: The operation could not be completed. Not enough space.
What can I do?
Thanks

You should be able to check Don't Show Again

When trying to update to 3.6 I get the message operation can't be completed - do not have sufficient privilages for some of the items.

I already sent this question but have had no answer yet so I thought I would ask again.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

I have clicked the Apple Software Update,a window pops up with Failed to check for updates.The operation couldn t be completed. Operation not permitted.This only occurring now did not happen previously.I am using 10.7.4,on a Mbp Pro.

I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
here in Koolewong.
richard.

Uninstall Intego...you don't need it.

Cannot create a new project with iMovie. Operation could not be completed. No solution to the problem is available.

Every time I go to create a new project in the latest version of iMovie for mac OS X yosemite, I get the following information. "The operation could not be completed. No further information is available about the problem.
I have tried restarting the computer, that didn't work. I also tried also, to reinstall the app. That didn't work. I even tried updating all the software, and that still didn't work. I am very frustrated and feel the mac was not a good gift, if a major essential app will refuse to work. Nothing I do, seems to work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Capture Error- Operation could not be completed as there is no video.

Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?

So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I am trying to watch a movie on my ipod touch 4th generation but everytime i click it it says "operation could not be completed"

I am trying to watch the movie Taken but everytime i try and watch it a message pops up that says "the operation could not be completed"

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

IMovie error message "The operation could not be completed"

I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
Thanks

My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

The operation could not be completed

This messagqe appears when trying to view videos in YouTube. No videos will run. I updated to OS5 some days ago, and YouTube worked nicely...

Hello
I also have this problem on my iPad2. The Ubuntu laptop and my old android phone plays videos just fine but when I try to play videos using the YouTube app on the 5.1 iPad 2 gives this "operation could not be completed" error. I am using the Internet connection available here at a guesthouse where I will stay for some months probably so I am not able to change router settings fo a network available to dozens of people over here. Since my old android device plays videos just fine using the default YouTube app without special settings required in router network configuration shouldn't this be a iPad issue?
Do you have an idea how I could play videos on the iPad since it would be more convenient due to the larger screen?

"Operation could not be completed. Operation not permitted" (NSPOSIXErrorDo

Similar Messages

Maybe you are looking for