Operation could not be completed?

I keep getting this error
Operation could not be completed, not enough space on disk
cs2
xp pro
3 gig ram
20 gig open on c drive
296 gig open on G drive
c drive set as first scratch
g set as second
current file is 16 x 20 at 300 dpi
hmm what else.... pentium dual core....

Hi there :) I bumped in your thread looking for a similar answer to a similar problem with Premiere Pro cs 2
I was on 2 gb ram and went to buy 2X2 gb, trying to resolve my low memory problemssss!
My system info now shows 2gb physical memory and 3gb available, does this mean that I'm using 3gb? (yes I bought one 2gb for nothing :(, but learnt something!
I did not know about the switch in boot ini and I'm not too sure how to go about it, I wonder also if it's the same with PP2.
thank you anyway for the questions and answers
Michel M

Similar Messages

Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Capture Error- Operation could not be completed as there is no video.

Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?

So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I am trying to watch a movie on my ipod touch 4th generation but everytime i click it it says "operation could not be completed"

I am trying to watch the movie Taken but everytime i try and watch it a message pops up that says "the operation could not be completed"

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

IMovie error message "The operation could not be completed"

I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
Thanks

My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

The operation could not be completed

This messagqe appears when trying to view videos in YouTube. No videos will run. I updated to OS5 some days ago, and YouTube worked nicely...

Hello
I also have this problem on my iPad2. The Ubuntu laptop and my old android phone plays videos just fine but when I try to play videos using the YouTube app on the 5.1 iPad 2 gives this "operation could not be completed" error. I am using the Internet connection available here at a guesthouse where I will stay for some months probably so I am not able to change router settings fo a network available to dozens of people over here. Since my old android device plays videos just fine using the default YouTube app without special settings required in router network configuration shouldn't this be a iPad issue?
Do you have an idea how I could play videos on the iPad since it would be more convenient due to the larger screen?

The operation could not be completed because an item with the name xyz already exists

I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?

If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities

'The operation could not be completed. Access is denied' during delete.

Hello World,
Something happened while working in my Visual Studio 2010 Professional environment.
When I delete a member from my Solution Explorer, it disappears from the memberlist, is marked as 'locked, deleted' and can be removed from TFS using Check-In. But during the delete process I get the message 'The operation could not be completed. Access
is denied.'
I'm an Administrator on my computer (manually adding/deleting members in my workspace and/or directly in TFS is not a problem). I get this message for every delete I perform, even in other Solutions!
The member will remain in my workspace however.
Can anyone help me with this problem please?
Thanks,
Guy Swagen
Microsoft Visual Studio 2010
Version 10.0.40219.1 SP1Rel
Microsoft .NET Framework
Version 4.0.30319 SP1Rel
Installed Version: Professional
Microsoft Office Developer Tools 01018-532-2002181-70270
Microsoft Office Developer Tools
Microsoft Visual Basic 2010 01018-532-2002181-70270
Microsoft Visual Basic 2010
Microsoft Visual C# 2010 01018-532-2002181-70270
Microsoft Visual C# 2010
Microsoft Visual C++ 2010 01018-532-2002181-70270
Microsoft Visual C++ 2010
Microsoft Visual F# 2010 01018-532-2002181-70270
Microsoft Visual F# 2010
Microsoft Visual Studio 2010 Team Explorer 01018-532-2002181-70270
Microsoft Visual Studio 2010 Team Explorer
Microsoft Visual Web Developer 2010 01018-532-2002181-70270
Microsoft Visual Web Developer 2010
Crystal Reports Templates for Microsoft Visual Studio 2010
Crystal Reports Templates for Microsoft Visual Studio 2010
Java language support for Visual Studio 1.0
Java language tools for Visual Studio includes IntelliSense and more... eventually...
Java project support for Visual Studio 1.0
Java project system for Visual Studio
Micro Focus Enterprise Developer Team Edition 2.2 Serial number: xxxxxxxxxxxxxxxx
Micro Focus Enterprise Developer Team Edition 2.2 Version 2.2.01204.
Serial number: xxxxxxxxxxxxxxxx Full license
For more information, visit http://www.microfocus.com.
Copyright (C) Micro Focus 1984-2014. All rights reserved.
Micro Focus Rumba Integration 1.0
Micro Focus Rumba Integration is a Visual Studio package which provides connectivity to Mainframes.
Microsoft Team Foundation Server 2010 Power Tools 10.0.41206.0
Power Tools that extend the Team Foundation Server integration with Visual Studio.
Microsoft Visual Studio 2010 Professional - ENU Service Pack 1 (KB983509) KB983509
This service pack is for Microsoft Visual Studio 2010 Professional - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/983509.
Microsoft Visual Studio 2010 SharePoint Developer Tools 10.0.40219
Microsoft Visual Studio 2010 SharePoint Developer Tools
Microsoft Visual Studio Process Editor 1.0
Process Editor for Microsoft Visual Studio Team Foundation Server

Hi GuySwagten,
Based on your description, the files you're trying to delete are locked by other team members of your team project in server workspace. You can have a check with your team members or check the hisotries of the files to see the lock information.
Please refer to this
page to get more information about TFS lock types. And you can ask the team member to unlock the files if you want to delete them or do other operations.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The Operation could not be completed. No other information is available about the problem.

MAC OSX 10.8.5
Processor 2.7 GHz
Memory 4GB1333 MHz DDR3
Logic Pro 9.1.8 (1700.67) 32 BIT
"The Operation could not be completed. No other information is available about the problem."
Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
Sincerely,
Butta Love

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

"The operation could not be completed" using iMovie 10.0.6

I'm using the new iMovie 10.0.6 with OS X Yosemite 10.10.
This is the first time I access to iMovie after upgrade to Yosemite.
When I try to begin a new movie and after select a theme the following message is shown:
"The operation could not be completed.
No other information is available about the problem"
The technical information obtained from the console is:
"13/11/14 11:46:50,195 iMovie[702]: -[NSAlert alertWithError:] called with nil NSError. A generic error message will be displayed, but the user deserves better."
So, I can't use iMovie as I expected...
Is anybody have this problem ?
Thanks

I had the exact same problem, working with apple support I had to uninstall iMovie and all the files connected with it and then download iMovie again. The problem is you iMovie is not creating the library file it needs to save your work.
Apple support was great at walking me through which files had to be deleted.
good luck
Ron

"The operation could not be completed" Creating an iMovie

Hello,
Every time I go to create a Movie or project in iMovie it says, "The operation could not be completed" followed by "No other information is available about the problem."
I have been recording several videos, and I need to edit them, get them on YouTube so I can clear the videos off my computer.
Any help is appreciated. Thank you in advance,
Patrick.

Hello,
Every time I go to create a Movie or project in iMovie it says, "The operation could not be completed" followed by "No other information is available about the problem."
I have been recording several videos, and I need to edit them, get them on YouTube so I can clear the videos off my computer.
Any help is appreciated. Thank you in advance,
Patrick.

The operation could not be completed. The specified module

Microsoft Visual Studio
The operation could not be completed. The specified module could not be found.
OK
i get teh above erro r msg when i am trying to open the crystal report rpt file in design mode
i tried taking a new crysttal report but that too gives me same error msg

Does it say what dll/module it can't find? Check the Application log for more info.
What happens if you create a new report? What happens if you open an old report?
Have you install any VS 2005 CR patches?
Try one of these samples:
Non-Enterprise Samples
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Thank you
Don

Operation could not be completed?

Similar Messages

Maybe you are looking for