"Operation Failed" Messsage While editing documents locally

Hi,
I am getting a "Operation Failed" Message while i try to edit a document locally. What could be the possible problem?
Regards
Nithya

Hello Nithya,
We have had the same problems .We have a lock down desktop concept which means that the some .dll files(for activex to work) required for editing are not always registered/allowed to run.
You could refer to note 755581
I have the same problem wherein employees are not allowed to change the settings there are two solutions to it.Iam speaking to my network guys to get this sorted we have tested this on a remote client and it works after registering two .dll files.
1)Use applet version.(But needs JRE installed on all client machines).
2)Speak to your network administrator and get this two .dll files registered.
or you can check with browser settings and make those changes.You can use some scripts which registers when they login.
I would like to add that when i use domain adminstrator user account i get a pop up to install the activex.
I am thank full to the sdn community who helped me to narrow down on this front.
Should you need any details please feel free to post back.
Regards
Ajey

Similar Messages

Regards : Edit document locally

HIII friends,
I am going through a very strange scenerio.
When on one users machine I am editing a document locally it is giving me Error Operation Failed.
Now on another machine when I am editing the document Succesfully when I am login as administrator .
Now The Tragedy happens When I am editing The same document On the same machine but this time as a simple user it is giving me *error Downloading of document failed *
And on some machine it is editing succesfully.
I have gone through the sap note 755581 and i have understood that It is Local PC ( perhaps Browser) Problm.
I have also download the docservice zip file and it has some dll files
Now I dont know what to do this Files.
I have fone through some threads that is giving information about regsvr32.exe file_name.dll command.
But I m unable to understand How to do it??
Pls also tell me How to set the envr variable SAPKM_USER_TEMP
Pls anyone can provide step by step solution..
Thanks in advance
Regards:
Mayank kumar Saxena
Rewards r waiting for Gud solution...:-}
Edited by: Mayank Saxena on Sep 4, 2008 7:44 PM

Hi Mayank,
check ActiveX is there in local pc or not?
Configuring Local Editing
In the KM standard configuration, ActiveX is used for local editing, but you can
use a Java applet instead by modifying the configuration for local editing. There
are two parameters that can be configured, which can be found by choosing System
Administration u2192 System Configuration u2192 Knowledge Management u2192 Content
Management u2192 Utilities u2192 Editing u2192 Local Editing.
The Active Component parameter specifies the component used for local editing,
that is, a Java applet or ActiveX. The Java applet requires the installation of a Java
plug-in and Java Runtime Environment (JRE) 1.4 on the client PC. This component
can be used for Internet Explorer and Mozilla. The ActiveX component requires
Internet Explorer.
Note: There is no need for additional installation, but certain settings need
to be made to the users browsers. The necessary settings are listed in
the SAP NetWeaver 04 Online Documentation under SAP NetWeaver u2192
Information Integration u2192 Knowledge Managementu2192 Content Management
Configuration u2192 Utilities u2192 Online & Local Editing.
If the Java applet option is used, the Java Runtime Version parameter needs to be
configured to specify the version; if HTTPS is required, version 1.4 is recommended.
Koti Reddy

Force editing document locally by link

Hello Community,
Hopefully it is the right forum for this problem.
I'm working with the Enterprise Portal and need a solution for the following problem.
I have some documents, stored in folder. One is like a central document with hints and links to the other documents. When I'm opening a document via link in this document, the target document opens and I have the possibility to change it.
Is it possible to have this functionality in a collaboration room, with check in and check out of the document I want to edit when clicking on a link in this "central" document? In other words, is it possible to force local editing via hyperlink?
Thanks for every hint or solution!
Message was edited by: Frank Hahnemann

Thanks for this hint, this works. It is a nice workaround. But now I have the problem, that a new Browser opens and I have to log in again. But this is maybe another "not Enterprise Portal"-problem. Another one is a maximum length of 255 chars for a hyperlink in MSExcel and this is just a MSOffice problem.
Maybe I have to find another solution for the whole problem.
Regards,
Frank

Edit locally giving error "Operation Failed"

while edit document locally in KM trough the command "edit locally". After clicking on "edit locally"a digitalized signed applet pops up with run and cancel button.(here applet is being set instead of Active x).I clicked cancelled. It shows the error "operation failed".Doesn't allow me even next time. Showing
How to solve the problems that even though I click the cancel, the next time same applet should popped up

Hello,
i me having the same Issue when i try to edit KM File locally (Excel) -> Operation Failed Error.
please advice how did u solved the Issue?
Thanks and Regards,
Nazih

KM Document: edit locally - error occured "Operation Failed"

Hi everyone!
I am runnig SAP NetWeaver Portal 7.0 with MS Internet Explorer 7.0.
I am trying to edit documents locally from the KM. Unfortunately it doesn´t work. Error occured "Operation Failed".
I think all ActivX settings in the web browser are corecctly configured. I don´t think that there are problems with permissions of the document because it doesn´t work with personal documents too.
Could the problem depend on MIME Type settings?
What can i do to solve the problem?
Looking forward for your helb and answers
Dominik

Hi Dominik,
Open the Config tool and check if you this java parameters set for each server node:
-Djava.io.tmpdir=
if not, create a directory and add this parameters to each server node .
After that, you should restart the J2ee server.
Hope this help.
Best regards,
José

Edit KM document locally..Operation Failed??

Hello,
we are running SAP NW Portal 7.0, SP14 and KM, Browser: MS Internet Explroer 7.0.
Now in KM when i try to edit a local Excel-sheet with the Command "Edit Locally" i get the following Error: "Operation Failed"...???!!! a Java Applet try to load, but does not apper in the Browser!
Please advice how i can solve this Issue!
Many Thanks and Regards,
Nazih
Edited by: Nazih Kayyali on Jan 27, 2009 12:20 PM

Hi Nazih,
First I would like you to ask you two things:
1. Make use of the search here on SDN to find a solution to your problem. A similar question was actually asked yesterday!
2. Please be more generous to the ones that answer your question. Looking through your old threads I barely see the use of any stars.
Now to you question. As mentioned before I just summarized yesterday a list of notes that should help find a solution to problems with local editing, and now I just added this list to the Wiki for others to make additions:
https://wiki.sdn.sap.com/wiki/display/KMC/HowtotroubleshootproblemswithLocalEditing
Hope it will be helpful for you,
Robert

How to Edit a Uploade Document Locally

Hi,
I had uploade a word document into Portal(KM) and i'am trying it to Edit Locally.When am choosing the option Edit Locally it is giving me an error "Operation Failed"
Please help me ragarding this issue.
With Regards
Pradeep.B

Hi Pradeep,
Have you seen these:
<a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=2226311#2226311">https://www.sdn.sap.com/irj/sdn/thread?messageID=2226311#2226311</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=3861454#3861454">https://www.sdn.sap.com/irj/sdn/thread?messageID=3861454#3861454</a>
Best regards,
Avishai Zamir

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Document Store Operation Failed due to missing authorisations.

Hi
I am using BW 3.5, One of the user is getting the following error message while accessing one of the report:
Document Store Operation Failed due to missing authorisations.
The user has previously accessed this report many times. But when I tied to access the report, there was no problem.
Could any one of you advise me how to rectify this error?
Many Thanks in advanc
Regards
Ishi

Hi Suresh
Thanks for the response; I have checked authorizations and user is authorised to access all the existing reports in BW. Checks were successful.
What might be the reason then?
Thanks

'Document store operation failed due to missing authorization'

Hi all,
I am getting the error message 'Document store operation failed due to missing authorization' when trying to save the workbook as the existing Workbook after changing the structure for it. We are using the Authorization Hierarchies.
What is the problem and how can I fix it, PLEASE ???
Thanks.
Message was edited by: Venkat Kodi

check out the related thread:
What is this error

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Error - ADD (FAILED : operation failed) while importing a FM in model

Hello,
When I try to import a FM in Web Dynpro Model, it gives me the following Error. What is the error related with. PLease read the error text below? How to resolve this ?
14:19:06.544 ADD (FAILED: operation failed) Raldb_Vari.dtsimpletype.xlf (C:\Documents and Settings\283818\.dtc\0\DCs\pg.com\ezp3\scezp3\dc_model\_comp\src\packages\com\pg\dc_model\models\ezp3model\types\Raldb_Vari.dtsimpletype.xlf)
Regards
Mrinalini

HI
are you able to import some other function module successfully or is this the problem with all of them
Thanks
Sarbjeet

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

"Operation Failed" Messsage While editing documents locally

Similar Messages

Maybe you are looking for