Operation Not Allowed When Sending to Soundtrack Pro

Hi
I have a problem with FCP. I have a clip named
main service.dv
When i try to Send To > Soundtrack Pro Audio Project, in the Save dialog, i tick Send only referenced media, and latest metadata... but when i hit Save, an "Operation not allowed" dialog appears. The file is saved, and I can open it in Soundtrack Pro, but its not associated back with FCP.
Thanks.
Joe

Joe Coyle wrote:
The footage was already captured before coming to me. I have nearly completed my project, now just needed STP to get rid of an electrical buzz on a clip.
It's still a bad workflow by definition, "operation not allowed" means you canto proceed without some kind of workaround. You do not need STP to remove a simple 60Hz. But you will need advanced audio processing tools to augment the 60Hz removal if the rest fo the track has lots of content in that freq.
bogiesan

Similar Messages

I have recently bought a macbook and am using outlook 2011 as email. i am getting an error message 4.7.0 not allowed when sending emails how do I fix?

i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?

I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.

Missing audio when sending to Soundtrack Pro

I have a sequence that I'm sending to Soundtrack Pro. It sends and opens but I notice that there is audio missing from sections where I have .motn elements in my timeline. The audio is there in FCP...
Is there a solution to this?

Turns out the audio needed to be linked to the .motn sequence.

Sync problems when sending to soundtrack pro

I am currently having a problem with a mono track audio/video clip sliding out of sync when I send it to soundtrack pro as referenced file only with 10 sec handles. When I send the entire clip the sync problem doesn't occur.
I have used soundtrack pro before and never encountered this problem.
I'm on FCP 6.0.3.
Thanks.

Turns out the audio needed to be linked to the .motn sequence.

No Video when using the "Send To Soundtrack Pro Audio File" Command

Hello FCP Users,
After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
Best regards,
Jeff
From the Manual:
Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
Soundtrack Pro Audio File Project” from the shortcut menu."
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.9)

Rob,
The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
It was captured DV.
If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
Jeff
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.8)

Function return value == -10. Native error code -2146824584 ADOBD.Recordset: Operation is not allowed when object is closed

I want to call Stored Procedure that return records and output parameter, from CVI
I can get output parrameter but when I want to get records stream I recieve following wrror:
function return value == -10. Native error code -2146824584 ADOBD.Recordset: Operation is not allowed when object is closed

in Stored procedure I create table variable and and insert into string values
when I remove usage of table variable the error desappear

When I sign my account on my iphone to download application, it is not allowed and send the message: your id is disabled

When I sign my account on my iphone to download application, it is not allowed and send the message: your id is disabled

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why do I get an error msg that reads "operation not allowed" whenever I try to Remove Attributes from my timeline?

On any given project, whenever I select everything in my timeline and try to remove all the attributes, I get an error message that reads "operation not allowed."
If I select a smaller chuck of files on my timeline and hit remove attributes, it works, but this isn't the case if I select everything in my timeline.
How do I fix this? Thanks!

Have you tried trashing your Final Cut Pro preferences? It is usually the first step when FCP begins to act in unexpected ways.
Download Preference Manager (free) from Digital Rebellion
http://www.digitalrebellion.com/prefman/
and use it to trash your preferences - they will be set to default the next time you open FCP.
If that does not remedy the problem, do you have any still images in your timeline that are not RGB, or are greater than 4000 pixels in the widest dimension?
Is your source material in an FCP7 edit friendly codec?
MtD

TS2510 I can't send to soundtrack pro 3 from Final Cut pro 7??

I can't send to soundtrack pro 3 from Final Cut pro 7??
When i try to Open a file soundtrack pro locks up. Why??

Final Cut Pro and FCS3 are not supported on PPC computers.
x

Operation not allowed , Out of Memory

Hey everyone.
I opened an FCP project one day and opened a sequence and got a dialog that says "Operation not Allowed", followed by "Out of Memory."
I can't open the sequence anymore.
I am running latest FCP with mac book pro intel core2 duo. I've got 2 GB ram and had nothing else open so I don't think it's the memory.
Anyone know a fix for this?
Help because I lost ALL my work!!!

I've seen this message when opening projects with clips using unsupported codecs such as Avid Meridien. You might be able to take the media drive offline temporarily to get eh project open, and sort the browser by compressor to check for different or missing codecs. Usually you can find these online and place the in the /Liibrary/QuickTime/ folder.
Hope this helps -
Max Average

JDBC + MySQL : "Operation Not Allowed After ResultSet Closed"

I have a very short piece of code. I use one connection to the database. I execute a query, get back a lot of rows, then iterate through the result set and for each row I get some information and then perform an insert into a different table.
The problem is that the big result set I am iterating through keeps closing sometime during the first iteration. Why? I am using three different statements:
1) Statement 1 is for the main query I want to iterate through
2) Statement 2 is for a quick lookup I perform (on a different table) for each item in the iteration.
3) Statement 3 is for the Insert statement which I perform for each item in the iteration. Again, I insert into a different table and I use "executeUpdate"
Given the I have three different statements and I am working with three different tables, why does my main result set that I am iterating through keep closing on me?
Here is the error I am getting:
java.sql.SQLException: Operation not allowed after ResultSet closed
at com.mysql.jdbc.ResultSet.checkClosed(ResultSet.java:3603)
at com.mysql.jdbc.ResultSet.next(ResultSet.java:2468)
at com.mysql.jdbc.UpdatableResultSet.next(UpdatableResultSet.java:565)
Thanks for your help.

I have a very short piece of code. I use one
connection to the database. I execute a query, get
back a lot of rows, then iterate through the result
set and for each row I get some information and then
perform an insert into a different table.Sounds like a classic case of making Java do what the database was made to do.
I'd bet you can do this in a single INSERT with a SELECT in the database in one network roundtrip. The "quick lookup" might be a JOIN or a sub-SELECT. When you do a query, bring N rows back to the middle tier, then do an INSERT for each row that you retrieve it means (N+1) network roundtrips if you don't batch your INSERTs. I'd have a SQL expert give your code a look.
The problem is that the big result set I am iterating
through keeps closing sometime during the first
iteration. Why? I am using three different
statements:
1) Statement 1 is for the main query I want to
iterate through
2) Statement 2 is for a quick lookup I perform (on a
different table) for each item in the iteration.
3) Statement 3 is for the Insert statement which I
perform for each item in the iteration. Again, I
insert into a different table and I use
"executeUpdate"
Given the I have three different statements and I am
working with three different tables, why does my main
result set that I am iterating through keep closing
on me?Maybe your ResultSet or Statement goes out of scope. Do the Statements share a Connection?
%

Send to Soundtrack Pro Multitrack Project - All I get are empty tracks

I have a sequence in Final Cut Pro that has a collection of clips and sequences inside of it. When I right click the sequence in the browser and select Send To -> Soundtrack Pro Multitrack project, it opens STP as it should. When STP opens, though, I have a correct video track, but all of the audio tracks are completely empty.
Am I doing something wrong here?

select the sequence in the browser and then send to STP
make sure the in & out are set correctly on the timeline

Outer Join problems - "ORA-30563 outer join operator (+) not allowed in select-list"

Products: Discoverer 4.1.33.0.2
(Admin and User/Plus)
8i EE 8.1.7 (Discoverer server)
8i EE 8.1.5 ('source data' server)
Background assumptions: (1) If a column from an "outer-joined" table is compared to a constant, the outer join operator must be applied to that column in order for the outer join to work. (2) A 'Condition' specified in Discoverer User/Plus manifests as a comparison to a constant.
I created a join in Admin between two folders, selected 'outer join on detail' option. In User/Plus, created worksheet containing columns from the joined folders. When no Conditions are NOT specified, results seem ok. However, when Condition IS added, worksheet encounters "ORA-30563 outer join operator (+) not allowed in select-list" and returns blank sheet.
To workaround, created Custom folder with outer join in place. Didn't work either with Conditions specified. No error, but I think that because Discoverer did not 'outer join' the Condition column, the outer join was ignored.
Any insights, ideas, or workarounds are much appreciated.
-Jim

If you build a query that uses an outer join then any items from the potentially deficient side of the join will have (+) appended to them everywhere in the sql. Up until 8.1.7 this was OK in the select list as it was just treated as noise and ignored - However this now fails with ORA-30563:
outer join operator (+) not allowed in select-list...
In 4.1.33.1.6 you get the error 'ORA-30563 outer join operator(+) not allowed in select list'.
In 4.1.36.1.10 the query runs OK.. Your work around I would guess would be to create a custom folder as you suggested.

ORA-01719: outer join operator (+) not allowed in operand of OR or IN

I am getting the following Error when I tried to execute my Query.
Error : ORA-01719: outer join operator (+) not allowed in operand of OR or IN
select unique t.estblmt_src_typ_id as estblmt_src_typ_id,
t.name as name from estblmt_src_typ t, src_estblmt_unknown_data u, estblmt_src eSrc, estblmt e,
additional_addr aa, country c, src_country_state_region scsr
where
(t.estblmt_src_typ_id=u.estblmt_src_typ_id and
e.state_region_id=scsr.state_region_id and
upper(scsr.code1)='UNKNOWN' and
u.processed_ind = 'N' and
eSrc.Estblmt_Alt_Id = u.estblmt_alt_id and
u.estblmt_src_typ_id = eSrc.estblmt_src_typ_id and
eSrc.Estblmt_Id = e.estblmt_id and
e.country_id = c.country_id and
u.estblmt_element = 'State Region' and
scsr.estblmt_src_typ_id = u.estblmt_src_typ_id and
aa.estblmt_id(+)=e.estblmt_id and
e.end_dt is null) or
(t.estblmt_src_typ_id=u.estblmt_src_typ_id and
aa.state_region_id=scsr.state_region_id and
upper(scsr.code1)='UNKNOWN' and u.processed_ind = 'N' and
eSrc.Estblmt_Alt_Id = u.estblmt_alt_id and
u.estblmt_src_typ_id = eSrc.estblmt_src_typ_id and
eSrc.Estblmt_Id = aa.estblmt_id and aa.country_id = c.country_id and (u.estblmt_element = 'Additional State Code' or u.estblmt_element = 'Additional State Province') and scsr.estblmt_src_typ_id = u.estblmt_src_typ_id
and aa.estblmt_id=e.estblmt_id and e.end_dt is null) order by t.name

First, is this query being executed within Apex or at the SQL prompt or in SQL Workshop, or something else? Some context of where it's being executed may help.
Next, that's a query from hell. How about rewrting it to use ANSI join syntax instead, so it'a bit more readable?
A quick example for part of it would be:
FROM (additional_addr aa LEFT OUTER JOIN estblmt e ON aa.estblmt_id = e.estblmt_id )
etc.
Just add additional parenthesis for each additional table join, similar to:
FROM ((additional_addr aa LEFT OUTER JOIN estblmt e ON aa.estblmt_id = e.estblmt_id )
LEFT OUTER JOIN src_country_state_region scsr ON aa.state_region_id = scsr.state_region_id )
In the long run it will make the query a bit more legible, so your where clause only lists the query conditions, not the join conditions. Then it becomes easier to quickly glance at it and see where potential problems may be.
Bill Ferguson

Javax.jms.IllegalStateException: Operation not allowed

Hi all, (first time posting, so go easy on me!)
just wondering can anyone out their shed some light on a problem I am having here with JMS. I am attempting to access JMS from a stateless EJB. The problem is I get an illegalStateException when I call "setMessageListener(..)". The bean simply creates an object (which implements the MessageListener interface) passing an RMI client callback reference into the constructor. The idea here is that when JMS forwards a message onto my listener, in the onMessage(..) function I call back into the RMI client. So the idea sounds simple, but JMS wont let me register the listener from the EJB. Heres some code and the exception which is generated (including the call stack):
jndiContext = new InitialContext();
Object objRef = (Object)jndiContext.lookup ("java:comp/env/jms/TopicConnectionFactory");
topicConnectionFactory = (TopicConnectionFactory)PortableRemoteObject.narrow(objRef, TopicConnectionFactory.class);
topic = (Topic) jndiContext.lookup(topicName);
topicConnection = topicConnectionFactory.createTopicConnection("Administrator", "123");
topicSession = topicConnection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
topicSubscriber = topicSession.createSubscriber(topic);
AppletSubscriber as = new AppletSubscriber(listener);
topicSubscriber.setMessageListener(as); // here's were the exception is thrown
Here's the exception & stack trace:
JMS Exception registerEventsListener: javax.jms.IllegalStateException: Operation
not allowed
javax.jms.IllegalStateException: Operation not allowed
at com.sun.enterprise.jms.MessageConsumerWrapperRestricted.setMessageLis
tener(MessageConsumerWrapperRestricted.java:40)
at RespondAdministrator.registerUserEventsListener(RespondAdministrator.
java:61)
at UserLogOnEJB.registerUserEventsListener(UserLogOnEJB.java:53)
at UserLogOnEJB_EJBObjectImpl.registerUserEventsListener(UserLogOnEJB_EJ
BObjectImpl.java:57)
at UserLogOnEJBEJBObjectImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(Ge
nericPOAServerSC.java:519)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(Gen
ericPOAServerSC.java:204)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAS
erverSC.java:112)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:273)
at com.sun.corba.ee.internal.iiop.RequestProcessor.process(RequestProces
sor.java:84)
at com.sun.corba.ee.internal.orbutil.ThreadPool$PooledThread.run(ThreadP
ool.java:99)
thanks in advance, this is driving me nuts.

The reason you get this is that you cannot use MessageListeners within a J2EE environment. The J2EE specification says that this method should not work from within EJBs. If you wish to have asynchronous message delivery from an EJB you need to use EJB 2.0s Message Driven Beans.
Hope this helps.

Operation Not Allowed When Sending to Soundtrack Pro

Similar Messages

Maybe you are looking for