Operation number not holding in Operation details screen for WM6.2

Hi Experts,
I have added custom statuses to operation object in WM6.2. When I am editing the operation,Operation number is displaying in operation details screen header.But when trying to execute custom statuses, the operation number is not holding in Operation tile view header as in the below screen snap.
Thanks in advance.Kindly suggest.
Thanks & Regards,
Sravanthi Polu

Hi sravanthi,
Just make sure that when you are editing operation object for custom statuses change you are editing same object that you are seeing in operation details screen.
I think this problem is due to different/stale operation object that is being edited for when you are calling Operation Edit Transaction for change status for (custom statuses).
I recommend to check your Target for Button , Action and Edit Transaction for this (is it same operation object that is being seen on detail screen/being edited for).
Regards,
AK

Similar Messages

  • HT4528 hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

  • Modify detail Screen for notification item

    Hi experts,
    I want to modify the detail screen for a notification item (FG: IQS0 - Dynpro: 3030). Using enhancement QQMA0008, i can implement a subscreen located in function group XQQM. Unfortunately this seems to be limited to 3 lines only. Is it possible to pop up a full customer screen here?
    Thanks in advance!
    Best Regards

    I don't think so, but start with [Note 36889 - User subscreens in quality notifications|https://service.sap.com/sap/support/notes/36889]
    Regards,
    Raymond

  • Do any imacs come with a touch screen if not whats the best touch  screen for a 2012 13inch macbook air

    Do any imacs come with a touch screen if not whats the best touch  screen for a 2012 13inch macbook air?
    Thx

    No they don't.
    Apple's position is that touchscreens are for tablets and phones (in Apple's case the iPad and iPhone) and that OSX does not need a touchscreen - the trackpad and/or mouse is more flexible.
    That may change in future but no one here knows.
    In answer to your second question, there is NO touch screen available for the MacBook Air (2012 or any other vintage), nor for the MacBook Pro.  If you must have a touchscreen, consider an iPad with a stand and a wireless keyboard.  Alternatively, a Windows 8.1 laptop or desktop???

  • Total column not changed between header & detailed screen

    I have a report with header data contains contracts information and detailed data contains orders, debit credit memo related to the contracts.  I write the report using CL_SALV_TABLE to display  contract value, usage  in full ALV_GRID. When I double click on a contract line, it will go to the second screen to show all orders related to that contract.  The second screen with orders information will be in a screen on a container with all standard function ( Export list to Excel, Word format etc..), sort, total and sub total) and a push button to go back to first screen.
      The report works fine but when I am on the second screen, I total and sub total the amount on that screen in order to check with total value in header record and it total up correctly by currency.
    But when I go back to the first screen, select a different contract record,  double click on the line to get to the order info screen,  all order data display correctly except that the total column still show amount from the previous detailed screen.  If I select the column again and click the total, it will total correctly.   I did refresh the data in the screen before go back to first screen but it does not solve the problem.
    DOES ANYONE HAVE A SIMILAR SYMPTON LIKE THIS? 
    Thanks for your advice.
    On the order detailed screen, I create a container with screen 100 and write PAI, PBO like this:
    Screen 100:
    process before output.
      module status_0100.
      module load_data_to_control.   "Load usage data to screen
    process after input.
    module user_command_0100.
    module status_0100 output.
      set pf-status 'PF100'.
      set titlebar 'T100'.
    endmodule.  
    module load_data_to_control output.
      if gr_cont is not bound.
        create object gr_cont
          exporting
            container_name = 'CONTAINER_100'
          exceptions
            others         = 1.
        if  sy-subrc <> 0.
          message a052(zvn) with
          ' No container object found'.
        endif.
        try.
            cl_salv_table=>factory(
            exporting
         list_display   = list_display
              r_container = gr_cont
          container_name =
            importing
              r_salv_table = gr_alv_2
            changing
              t_table = gt_orders
          catch cx_salv_msg into gr_error.
        endtry.
        perform set_functions.        " Set all standard function in screen 100
        perform set_column_order using gr_alv_2.       "Set column format, display
        perform handle_events.                       "Register events for selection mode & user commands
         Display order screen 0100
        gr_alv_2->display( ).
      else.
        gr_alv_2->refresh( ).
    endif.
    module user_command_0100 input.
      data: wa_d type gt_dtab,
            ls_contract type vbeln,
            ls_order    type vbeln,
            ls_invoice  type vbeln,
            ls_belnr type belnr_d,
            ls_row   type char10.
      data: l_text type char128.
        case  sy-ucomm.
        when 'RETURN' or 'BACK' or 'EXIT' or 'CANCEL'.
    *... refresh the table in order to see the new data
          gr_alv_2->refresh( ).
          leave to screen 0.
        when others.
      endcase.
    endmodule.                 " USER_COMMAND_0100  INPUT

    Hi ,
    When you are using the CL_SALV_TABLE, what is the use of screen 100. Better populate the evnts table in CL_SALV_TABLE
    Cheers
    Pavan

  • Approver not able to go detail screen to see approve / reject buttons

    Hello friends,
         Approver can see the corresponding workitem in his approval inbox. When click on the approval workitem next screen where approve / reject button with item detail screen is not coming. explorer is refreshing and approver workitem screen will appear again. I am in SRM 5.5 Server and SP13. please let me know if any one face this problem.
    with Regards,
    John.

    Hi,
    Please go to following SPRO node and maintain the settings as below.
    SPRO>SRM>Cross application basic settings>sap business workflow>define Dynamic columns for integarted inbox.
    Maintain the EC_Decision as well second attribute  ec_mail for below tasks.
    TS10008126
    TS10008127
    Then it should work.
    thanks
    Ravi

  • Detail screen for row level locking

    Hi All ,
    I have developed row level locking for a table , Next requirment is to display the details of each row i another screen when the user click on each row .And if the row which is clicked for display is geyout in first screen then it should be grey in details screen also .If the row is editable in the first screen then it should be in change mode in details screen .
    I appreciate the help and support .
    please provide the answer as soon as possbile .....
    Thanks,
    NJ

    Yes, if a process holds many row level locks on a table, those locks by default can be escalated to partition locks, and, if necessary, table locks.  Unless you are getting and holding many locks on a given table, this will not happen.
    You say you are exporting data.  If all you are doing is selecting from the table (not updating, deleting or inserting data) and you are using the read committed transaction isolation level, you would only hold a lock on a row for the small fraction
    of a second when you are actually reading it.  So you will never have large numbers of locks at one time.  If you are doing large numbers of updates, inserts, or deletes in a singletransaction or if you are doing large numbers of selects in a single
    transaction with the isolation level set to repeatable read or serializable, then it is possible to get enough locks to cause SQL server to escalate to partition or table locks.  This is normally a good thing (that's the reason Microsoft made it the default). 
    To many locks eats up memory.
    However, if you determine this is causing you a problem and you do not want the locks on a particular table ever escalated, you can use the ALTER TABLE SET (LOCK_ESCALATION = DISABLE) command to prevent most cases of lock escalation on a table by table basis. 
    See BOL for a description of the ALTER TABLE command.  However, I would recommend you not use this unless you have determined that lock escalation is causing you problems.  It is very easy to make things worse, not better by doing this.
    Tom

  • Error Message is not displayed on the pop screen for chain end chain

    Hi,
    I have called a screen in one of the standard program using enhancmenets,
    and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
    but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
    regards
    afzal

    Hi,
    have you tried option "LIKE" with instruction MESSAGE.
    Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
    And instead of using a MESSAGE instruction, why to not use a popup ?
    Like using one of these function modules (for instance):
    TMS_BCU_POPUP_TO_CONFIRM
    POPUP_TO_CONFIRM_STEP
    POPUP_TO_DECIDE
    FC_POPUP_ERR_WARN_MESSAGE
    etc...
    If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
    Regards
    Mickael

  • Ess wda: updating Iban for insert/copy/modify in bank detail screen for germany

    Hi,
    We are using standard detail screen HRESS_CC_PER_DTL_BANK_DE for Germany, We have observed that even if the user changes/updates/creates the new record without filling Iban field system will not throw any error which is correct as per V_T588MFPROPC as we have not made it mandatory. but we have an option to populate Iban using specific button in PA30, can we have the same functionality in ESS? Can we implement HRPAD00INFTYDB for this purpose? Is there any other option for this functionality?
    Thank you,
    Krishna kishore T.

    I can solve this issue implementing the BAdI HRPAD00INFTYDB
    Summary of configuration options in ESS Personal Information scenario
    Regards

  • Why the 'decline' option not present in the lock screen for an incoming call in ios7?

    Why is there no call decline option on the lock screen for an incoming call in IOS7??

    Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
    WTH, is my phone the only thing in the world, I could be busy with to decline??

  • Show detailed screen for "WORK ITEMS"

    Hi
    We have configured POWL for showing Leave / Travel request. The requirement is ... we have to show detailed screen of respective item which are displaying under "Work Items", it's a combination of Leave / Travel etc.
    How do I show complete detail screen of selected item which are displaying under "Work Items "???
    Thanks

    Powl has multiples queries ie leave request and Timesheet you can all filter to see all tasks in one screen ALl the queries in the initial screen comes form POWL_COCKPIT

  • Nov 2008 Battery - now not holding charge - is this grounds for a free one

    As the tile suggests I dug my receipt out and I replaced my original battery with a new one for $170 in Nov 2008. Now the battery is cutting out at various stages ( 10, 20, 30 even 50% )and not holding charge despite attempts to calibrate, reset PVRAM etc etc etc.
    Is this grounds for a replacement or just the natural life of the battery ?

    The purpose of the forums is to ask and answer technical questions on OS X and other Apple products. Polling is forbidden. If you want to find users with similar problems then do a forum search rather than asking. Searching the forums is always the first thing you should do before posting a question.
    Just so you won't think I'm being persnickety about this please read the Terms of Use by clicking on the link on the right of this page.
    But specifically you are asking if you have grounds for a part replacement. No one here can answer that question because it is up to AppleCare or the vendor to make the determination. And such determinations are done on a case by case basis. Nothing you're told here in this regard is reliable.

  • User Specif Felilds in Routing operation details screen

    Hi Techies,
    Here I want some information regarding
    User Specific feilds:
    Here we can have
    4 - Text boxes,
    2- Value Boxes
    2- Quantity Boxes
    2-Indicators.
    Can any one explain the relevance of these feilds and how can they control the flow..
    Thanks in advance
    Regards,
    Kiran

    Hello Kiran,
    This user fields are information fields. They don't have any control parametes.Unless you want to influence the process by user exit or any other enhancement, this field are for information only.
    The data from this field can be viewed in production order and used in shopfloor docs(print). Orelse the other option was is to  use this in confirmation screen(with userexit) for additional information.
    Reg
    Samson

  • Free item reference document number not populated in MIGO item screen

    Hi
    I have a requirement where in I would need to populate the reference document number in the MIGO item when I am cancelling a goods receipt in case of free items.
    In standard SAP system we know that it would only be populated when GRbased IV is ticked in PO but in free item PO this is not ticked . So was enquiring if any body knows how we could populate the reference document number at GR cancellation in MIGO item level for free items .

    Hi,
    If you mean the field MSEG-SMBLN, then it is always populated at cancellation, no matter the GR-based IV flag.
    BR
    Raf

  • Bdc Screen data not passing to XK01 transaction screen for the second PO

    Hi Friends,
                    I have an requirement to extend an existing vendor to multiple company code and for multiple purchase organisation.I have created one report that will list the company code and the purchase organisation to be extended for the vendor. I am calling the standard program as below.
              LOOP AT li_porg.
              If user has ALSO selected p. organizations to extend...
                IF NOT li_company[] IS INITIAL.
                  LOOP AT li_company.
                    SUBMIT zricef666 WITH ld_par = ld_param
                                     WITH ls_vend = ls_vendor_ampl
                                     WITH ld_bukrs = li_company-bukrs
                                     WITH ld_ekorg = li_porg-ekorg
                             AND RETURN.
                  ENDLOOP.
              ENDLOOP.
    Within the program zricef666 , i am calling the below program to extend vendor.
    SUBMIT RFBIKR00 WITH ds_name = FICH
                   WITH xlog = ld_mark
                    AND RETURN.
    Now the problem i am facing is that the first vendor got extended sucessfully for the first PO.But for the second PO , the screen fields are blank and it stuckes in that screen. But in the session i am able to clearly see the data are there but these data are not passing to the screen of XK01.
        Need help to solve this problem from you all.Thanks in advance.
    With Regards,
    Ajit Prasad.

    Hello Ajit, try with the following code and reward if useful. the following code uses the transaction XK01.
    REPORT zbdcxk01 .
    DATA: BEGIN OF itab OCCURS 0,
            lifnr LIKE rf02k-lifnr,
            bukrs LIKE rf02k-bukrs,
            ktokk LIKE rf02k-ktokk,
            name1 LIKE lfa1-name1,
            sortl LIKE lfa1-sortl,
            land1 LIKE lfa1-land1,
            brsch LIKE lfa1-brsch,
            akont LIKE lfb1-akont,
            zterm LIKE lfb1-zterm,
            reprf LIKE lfb1-reprf,
            zwels LIKE lfb1-zwels,
          END OF itab.
    DATA: rc TYPE i,
          flag TYPE i VALUE 1,
          it_files TYPE filetable,
          bdc_data TYPE STANDARD TABLE OF bdcdata WITH HEADER LINE.
    DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_file(1024) TYPE c OBLIGATORY.
    PARAMETERS:dismode DEFAULT 'A',
               updmode DEFAULT 'S'.
    SELECTION-SCREEN : END OF BLOCK b1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
      CHANGING
         file_table              = it_files
         rc                      = rc.
    *Read the Filename into P_FILE
      READ TABLE it_files INDEX 1 INTO p_file.
    START-OF-SELECTION.
      PERFORM getdata.
      PERFORM create_session.
      LOOP AT itab.
        PERFORM fill_bdc_table.
      ENDLOOP.
      PERFORM close_session.
    END-OF-SELECTION.
      PERFORM submit.
    *&      Form  getdata
    *       text
    FORM getdata.
      DATA: file TYPE string.
      file = p_file.
      CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
                filename                = file
                has_field_separator     = 'X'
           TABLES
                data_tab                = itab
           EXCEPTIONS
                file_open_error         = 1
                file_read_error         = 2
                no_batch                = 3
                gui_refuse_filetransfer = 4
                invalid_type            = 5
                no_authority            = 6
                unknown_error           = 7
                bad_data_format         = 8
                header_not_allowed      = 9
                separator_not_allowed   = 10
                header_too_long         = 11
                unknown_dp_error        = 12
                access_denied           = 13
                dp_out_of_memory        = 14
                disk_full               = 15
                dp_timeout              = 16
                OTHERS                  = 17.
    *IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    ENDFORM.                    " getdata
    *&      Form  CREATE_SESSION
    *       text
    FORM create_session.
      CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
         client                    = sy-mandt
    *   DEST                      = FILLER8
         group                     = 'MYGROUP'
    *   HOLDDATE                  = FILLER8
         keep                      = 'X'
         user                      = sy-uname
    *   RECORD                    = FILLER1
    * IMPORTING
    *   QID                       =
       EXCEPTIONS
         client_invalid            = 1
         destination_invalid       = 2
         group_invalid             = 3
         group_is_locked           = 4
         holddate_invalid          = 5
         internal_error            = 6
         queue_error               = 7
         running                   = 8
         system_lock_error         = 9
         user_invalid              = 10
         OTHERS                    = 11
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " CREATE_SESSION
    *&      Form  CLOSE_SESSION
    FORM close_session.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
           EXCEPTIONS
                not_open    = 1
                queue_error = 2
                OTHERS      = 3.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " CLOSE_SESSION
    *&      Form  FILL_BDC_TABLE
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM fill_bdc_table.
      REFRESH bdc_data.
      PERFORM operation.
      CALL FUNCTION 'BDC_INSERT'
       EXPORTING
         tcode                  = 'XK01'
    *   POST_LOCAL             = NOVBLOCAL
    *   PRINTING               = NOPRINT
        TABLES
          dynprotab              = bdc_data
    * EXCEPTIONS
    *   INTERNAL_ERROR         = 1
    *   NOT_OPEN               = 2
    *   QUEUE_ERROR            = 3
    *   TCODE_INVALID          = 4
    *   PRINTING_INVALID       = 5
    *   POSTING_INVALID        = 6
    *   OTHERS                 = 7
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      PERFORM bdc_transaction USING 'XK01'.
    ENDFORM.                    " FILL_BDC_TABLE
    *&      Form  BDC_DYNPRO
    *       texT
    *  -->  p1        text
    *  <--  p2        text
    FORM bdc_dynpro USING program dynpro.
      CLEAR bdc_data.
      bdc_data-program = program.
      bdc_data-dynpro = dynpro.
      bdc_data-dynbegin = 'X'.
      APPEND bdc_data.
    ENDFORM.                    " BDC_DYNPRO
    *&      Form  BDC_FIELD
    *       text
    FORM bdc_field USING fnam fval.
      CLEAR bdc_data.
      bdc_data-fnam = fnam.
      bdc_data-fval = fval.
      APPEND bdc_data.
    ENDFORM.                    " BDC_FIELD
    *&      Form  BDC_TRANSACTION
    FORM bdc_transaction USING tcode.
      CALL TRANSACTION tcode USING bdc_data
                             MODE   dismode
                             UPDATE updmode
                             MESSAGES INTO messtab.
    ENDFORM.                    " BDC_TRANSACTION
    *&      Form  SUBMIT
    *       text
    FORM submit.
      SUBMIT rsbdcsub EXPORTING LIST TO MEMORY AND RETURN
    *                  user sy-uname
                        WITH mappe = 'MYGROUP'
                        WITH von   = sy-datum
                        WITH bis   = sy-datum
                        WITH z_verarb = 'X'.
    ENDFORM.                    " SUBMIT
    *&      Form  OPERATION
    *       text
    FORM operation.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'RF02K-KTOKK'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'RF02K-LIFNR'
                                    itab-lifnr.
      PERFORM bdc_field       USING 'RF02K-BUKRS'
                                    itab-bukrs.
      PERFORM bdc_field       USING 'RF02K-KTOKK'
                                    itab-ktokk.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFA1-SORTL'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'LFA1-NAME1'
                                    itab-name1.
      PERFORM bdc_field       USING 'LFA1-SORTL'
                                    itab-sortl.
      PERFORM bdc_field       USING 'LFA1-LAND1'
                                    itab-land1.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFA1-BRSCH'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'LFA1-BRSCH'
                                    itab-brsch.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFBK-BANKS(01)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFB1-AKONT'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'LFB1-AKONT'
                                    itab-akont.
      PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'LFB1-REPRF'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=UPDA'.
      PERFORM bdc_field       USING 'LFB1-ZTERM'
                                    itab-zterm.
      PERFORM bdc_field       USING 'LFB1-REPRF'
                                    itab-reprf.
      PERFORM bdc_field       USING 'LFB1-ZWELS'
                                    itab-zwels.
      PERFORM bdc_transaction USING 'XK01'.
    ENDFORM.                    " OPERATION

Maybe you are looking for