Operation question about log

if i set rampolicy to inuse mode,ckpt frequency to 0,log purge to true.whether the log will be auto purged when all connection disconnect from the datastore?
Message was edited by:
knights

ChrisJenkins wrote:
No logging mode (Logging=0) is a 'special use' option and has many, many limitations. For example:
1. Replication is not available
2. XLA and XLA/JMS is not available
3. All locking is at the database level; even queries will acquire an exclusive database leve llock so the database essentially becomes single threaded
4. Transactions are not available so there is no commit or rollback and any errors can leave multi row updates/deletes partially done
5. The only persistence is now via checkpoints; but fuzzy checkpoint is not available so all checkpoints are blocking and will impede application access to the database
{color:#3366ff}Essentially, no logging mode is only intended for bulk data load operatiosn when initially populating your datastore. {color}Hi Chris, I'm facing this case.
During the time of loading cache group from db into data store,I wanted to close log operation when loading then open it after the operation. While I found that, after closing the log( by setting logging=0), I can't run the "load cache" command, which hints me error.
Would you kindly pls. tell the way to disable the log temporarily? Many thanks!
Regards,
Michael
It is not in general usable for any kind of operational running. TimesTen does not support purely in-memory operation. Checkpointing and logging are fundamental mechanims and are required for any real use of TimesTen.
Chris

Similar Messages

Urgent - Question about logging and debugging.

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

A dumb question about logging

Hi all,
i ran into some problems using the pregenerated static Location "logger" instance of an arbitrary WD controller for logging.
So far i used this logger in conjunction with a superior Category instance only, e.g. the logging (and tracing, if minimum severity is configurated at a proper level) output was related to a category like "/Application/MaterialManagement" or whatever.
Now i tried to use the logger without a category after a long time again, but i didn't succeed to generate any output!?!
So my question is: What do i have to do (configurate) to produce some output from this Location? I remember, that in earlier versions there has been a (file-based) WDRx.log, which kept all WD-related output of the configurated severity level. Do i have to reactivate this somehow?
Thanks in advance.
Regards
Stefan

Hmmm,
i found it by myself. I looked into the wrong trace (dispatcher's default trace instead of server's default trace, aehem).
For all of you who want to know where the logging output goes by default:
If you use the
private static final com.sap.tc.logging.Location logger =
    com.sap.tc.logging.Location.getLocation(Your.class);
generated by the WD generation framework for example like
public void wdDoInit()
    final String _methodName = "wdDoInit()";
    try {
      logger.entering(_methodName);
      logger.infoT("Time to do something useful.");
    } finally {
      logger.exiting();
the complete output of the logger will be output to the trace which is displayable in the "Log Viewer" service of the Visual Admin at "Cluster (xx)->Server xx->.\log->10:defaultTrace.trc"
Since there's an identical entry under the "Dispatcher xx" node (should have number 32), take care not to view the wrong one
Regards
Stefan

Question about logging

Hi guys! How the log() method from ExternalContext works and how can i use log4j to log messages in my application??

hi;
Please take a look to log4j usage in the folloing link.
http://logging.apache.org/log4j/docs/manual.html
I use log4j for a long time, I suggest that initialize log4j using a servlet
http://asahin.net

A question about log.

Hi all:
In a program, i mixed up two kind of log mechinism:
the Logger.global.info() and System.out.println().
but what suprise me is that the sequence of the output is not the same for every run of the program.
some time the message from Logger in front of the System.out, and sometime not.
I wonder if the Logger run in a seperate thread different from the System.out? How to solve this problem?

It is running in a separate thread. I would advise converting to all logging if possible. If not, declare a single variable and synch on it.
public class MyClass {
    // other code
    private Object synchOutput = new Integer(33): // value and object type is irrelevant. ..
   public void someMethod ()
       synchronized (synchOutput) {
            // logging code.
   public void anotherMethod ()
       synchronized (synchOutput) {
            // Sysout code.
}

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

Question about operating system

Hello.
I just got lenovo T400. I have question about operating system. I choose OS (Windows XP Professional preinstalled through downgrade rights in Genuine Windows 7 Professional). When I get the laptop, Windows XP is preinstalled but I don’t know how to upgrade to Window 7. Please, tell me the way to upgrade.
Have a nice day

you'd need the disks, and would need to do a fresh install, i.e. you can't just upgrade it. everything will be gone
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Question about imap log format.

I hava a question about imap log file.
Here are sample imap log lines
[26/Dec/2005:13:21:24 +0900] mail imapd[513]: Account Notice: close [203.231.11.113] ywmoon 2005/12/26 13:21:24 0:00:00 1013 2843 2
[26/Dec/2005:13:21:32 +0900] mail imapd[513]: Account Notice: close [203.231.14.251] hkchoi 2005/12/26 13:20:37 0:00:55 446 1196 0
Above line...
First line
ywmoon : UserID
2005/12/26 : Date
13:21:24 : login time (hour:minute:second)
0:00:00 : ?
1013 : bytes from client to server
2843 : bytes from server to client
2 : ?
next line
13:20:37 : same above
0:00:55 : ?
446 : same above
1196 : same above
0 : ?
From above, I don't know "?" mark fields.
0:00:00 or 0:00:55 ==> expenditure time to login ? And is this "hour:minute:second" OR "minute:second:milliSecond" ?
2 or 0 ==> 1 means INBOX. 0 and 2, what they are mean ?
Thank you in advance...

I hava a question about imap log file.
Here are sample imap log lines
[26/Dec/2005:13:21:24 +0900] mail imapd[513]: Account
Notice: close [203.231.11.113] ywmoon 2005/12/26
13:21:24 0:00:00 1013 2843 2
[26/Dec/2005:13:21:32 +0900] mail imapd[513]: Account
Notice: close [203.231.14.251] hkchoi 2005/12/26
13:20:37 0:00:55 446 1196 0
Above line...
First line
ywmoon : UserID
2005/12/26 : Date
13:21:24 : login time (hour:minute:second)
0:00:00 : ?how long the connection lasted.
1013 : bytes from client to server
2843 : bytes from server to client
2 : ?Number of messages?
that's a guess. we don't actually document this stuff.
>
next line
13:20:37 : same above
0:00:55 : ?
446 : same above
1196 : same above
0 : ?
From above, I don't know "?" mark fields.
0:00:00 or 0:00:55 ==> expenditure time to login ?
And is this "hour:minute:second" OR
"minute:second:milliSecond" ?
2 or 0 ==> 1 means INBOX. 0 and 2, what they are mean
Thank you in advance...

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Legality questions about Home Sharing

I have some legality questions about Apple's Home Sharing technology.
As I understand it, you can share (that is, copy it from one computer to another) your music, movies, applications and other iTunes-managed files amongst five computers. The only 'trick' is that each computer must have an iTunes Store account and must be logged in in order for it to work.
My question concerns the copying aspect and the legality of it. For content that was purchased through the iTunes Store I can see how Home Sharing can provide a limitation on content sharing, since all of the machines would need to be connected to Apple's servers in order for the validation process to happen. But what about content that was added to iTunes through other means, e.g., ripping my own CDs or converting my DVDs? These items can still be copied via Home Sharing and as there's no DRM on them there's no way they can be protected against "illegal" or "unauthorized" use.
It was my understanding that if I gave a copy of a song to someone else, that's illegal. Apple's Home Sharing technology seems to facilitate this action. If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy? Can I be held liable for distribution of content?
And how far does this extend? If I live in a house with four unrelated people, are they legally (?) allowed to copy music and media amongst each another? Is there a perceived or actual difference between using Home Sharing to copy a movie versus, say, using a USB flash drive? And what if one of them moves out? Am I legally obligated to go through that person's hard drive and remove content that they copied from me before they leave the building?
Does Home Sharing somehow retroactively change the copyright application on a given CD or DVD? Most of my CDs and DVDs contain notices and warnings against distributing copies. Can these warnings now be ignored, or at least amended with "...unless you're using iTunes Home Sharing" at the ends of them?
I am not trying to stir up a hornet's nest here. I'm only trying to better understand the legal issues surrounding Home Sharing and particularly how they relate to unprotected content. It seems very contradictory that the RIAA and MPAA would be fighting so hard against peer-to-peer services like BitTorrent and Gnutella while apparently allowing peer-to-peer services through iTunes Home Sharing.
Furthermore, I also understand that the intention of this system was to allow families who are living together to have common access to all of the "household" music, but my issues aren't about this. I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
Any insights would be appreciated. Thanks.

If I rip a CD or DVD into iTunes and someone copies it out, isn't that making an illegal copy?
RIPping of commercial, encrypted DVDs (most of them) is illegal to begin with. Or rather, breaking the encryption on a DVD is illegal and in order to RIP the DVD, you must break the encryption. SO you have already "broken the law" by having a copy on your computer.
Most of my CDs and DVDs contain notices and warnings against distributing copies.
Most of your DVDs have a notice about even simply making a copy, not only distributing copies.
Much of your post has been cussed and discussed by many, many people (lawyers, corporations, organizations, individuals, etc.) and no one has come (or likely ever will come) to a complete agreement.
Generally, "sharing" in the same house hold amongst family members seems to be okay. Outside the same household/family is almost always not okay.
I envision, for example, a college dorm building where there's several hundred people living together on the same network subnet, and all of them have Home Sharing enabled and everyone is copying thousands and thousands of songs to/from one another. Is this now legal?
No.
This is exactly what Napster was and why they were sued & shut down.
I imagine Apple lawyers have done their homework as well as consulted with the labels to discuss these exact issues.
And it's called "Home Sharing" to indicate that it is not "Dorm Sharing" or "Workplace Sharing", or even simply "Library Sharing"etc. even though it may be possible to use it in other places than the Home.
Users on other computers need to know your iTunes ID and password to enable it Home Sharing. Likely this is how Apple got the lables to be okay with it.
Are you gonna give (and get) dozens/hundreds/thousands/any other users your iTunesID & password?
You can contact Apple Legal here -> http://www.apple.com/legal

Question about using multiple iPods on the same PC

I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
I hope that made sense.
Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
Thanks in advance for any help

Hi, Wes.
Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
For no particular reason, let's answer your last question first ...
... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
As to your first question ...
... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
Post back if all this hasn't been as clear as mud and you need anything clarified.

Operation question about log

Similar Messages

Maybe you are looking for