Operation time in master reciepe

Dear all,
Where can we mentain operation time in in master reciepe.
Please help
San

Hi San,
In Master Recipe you can not maintain Activity times at Operation Level.It can be assigned at Phase Level Only.
Regards,
Dhaval

Similar Messages

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

SAP FC: time dipendent master data

Hi All,
I'm implementing the new SAP RDS for Solvency II on SAP FC.
I have a important question: Is it possible to have time dipendent master data?
For example
The period of the reporting ID is 06.2014
I upload a record with a fund with rating AAA (and period 06.2014)
I create another reporting ID with period 09.2014
I update the master data for the same fund that now have a new rating (BBB)
I upload a record for the period 07.2014 with the same fund
When I execute the report for the period 06.2014 I can't see the old rating (AAA) but only the last.
Is it possible to have the history of master data's changes?
Thank you in advance,
Matteo

Hi Matteo,
As response to your question about having the history of master data's changes, you can enable the
trace reports which help the user to track any object modifications that have occurred.
Trace reports list any time a tracked object is created, modified, or deleted, and mention who performed the action.
This option can be enabled in the Desktop General Options as follwo:
Select Tools > General Options.
Select the Trace Reports tab.
Activate Enable the trace report function.
Click Select views to select the views whose operations you want to log.
Deactivate the views whose operations you do not want to log.
Click OK.
Once this function is activated, all operations for the module objects you selected are logged in reports.
Hope thiw would be helpful.
Kindest regards,
Siwar

Operating time error in work center

while creating production order, i am getting the below error
"No working/operating time maintained in work center for scheduling"

Hi,
Check following thing,
1.Check whether you have maintained time in capacity tab.
2.Check scheduling tab formulas.
3.Check in control key whether scheduling has been activated.
The error shows below message
C7014 - No working/operating time maintained in work center for scheduling - C7 014
Vendor Master (General Section) General Material Data
This documentation is copyright by SAP AG.
Diagnosis
No operating time has been defined for the work center specified in the operation.
System Response
Scheduling is carried out on the basis of an operating time from 00:00 hours to 24:00 hours.
Procedure
Maintain the operating time in the work center.
So maintain correct time in capacity tab
Regards / US
Edited by: Umashankarpmgl on Jan 20, 2012 2:58 PM

Time-dependent master data in the cube and query

Hello,
I have a time-dep. masterdata infoobject with two time-dep attributes (one of them is KF). If i add this infoobject into the cube, what time period SID will be considered during the load? I assume it only matters during load, if i add the KF to the query it gets its value based on the SID in the cube.. right?
Thanks,
vamsi.

If its Time Dependent Master Data object when you run your Master Data if that time any changes to the Master Data that value will be overwrite to the old value you will get the new value. When you run the Query execution the Infocube Master Data infoobject will having the SID that time it will to there it will be displayed at that moved what is the value you have in the Master Data table.
This is what my experience.
Thanks,
Rajendra.A

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

How to create Child record at the time of master record creation.

Hi,
I have MasterVO and ChildVO. And association between both are 1 to *. I have a requirement like, I need to create row in ChildVO at the time of MasterVO row creation.
I have used entity based association to create view link. This view link created ChildVO accessor in MasterRowImpl as type RowIterator.
Actually my idea is to override create method in MasterVORowImpl and call ChildVO ViewObject and call .createRow() method on it. But I don't have access to ViewObject, instead it gave access to RowIterator.
Could you please provide any pointer to achieve above functionality?
Many thanks in advance.
Jdev version - 11.1.1.7.0
Regards,
Dileep.

Hi Tim,
Now it is creating child record at the time of master row creation. But it is working only through BC tester. But when I drag the child VO instance in the jsff page, only master is get created as editable only, child is displayed as read only without populating any default values like child VO surrogate key and other default attributes. But through BC tester it is working fine.
Am I missing anything here while implementing in UI?
Thanks,
Dileep.

Operation time calculation based on partial confirmation.

Dear FRndz,
Pls help me out with following scenario.
1.Am defining a task list in which am mentioning the set up time as 30 min & operation time as 10 Min per peice of finished goods.
2.Creating a production order for 10 Pieces.
3.Am doing partial confirmation of 5 Nos.
At this point of time I want the system to calculate the timings appropriately for 5 peices.how do I configure it?....
REgards,
Srini

Dear,
Go to TCODE :OPK0
This is the single screen entry for confirmation.
Select the profile you are using & in the tab Defaults
go to section default values & select "IMMEDIATE PROPOSAL"
in both "quantities & services"
It will definitely work.
Regards,
R.Brahmankar

What is time dependent master data?

Can anybody explain me in detail with an example for time dependent master data?
Thanks in advance.
Sharat.

hi,
the master data value changes with respect to some time characteristics.
say- Salesregion is a char that have sales rep as master data(attribute)
saleregion date from date to              sales rep
sr001        20/10/2007 20/12/2007          Ram
sr002        21/12/2007 12/05/2008          Ram
in the above example Ram is in two sales region in different dates.
these type of attributes were time dependent.
usually time period will be defined in the data range of 01/01/1000 to 31/12/9999.
Ramesh

Operating Time Machine over a remote Back to My Mac connection is a challenge -- can I do restores in Terminal?

When operating Time Machine remotely via Back to My Mac (and by remotely, I mean from Illinois to Ohio ), seeing your remote mouse cursor is largely a no-go, even in Lion. It simply does not get displayed, with very minor, flickering exceptions. Certainly it becomes impossible to operate the Time Machine's Finder window in any mouse-clicking way. I can barely operate the CANCEL or RESTORE buttons, and that's if I help myself by mousing over from outside the Screen Sharing Window, and kind of estimating if I am over the button area. Similarly, I can get the mouse to give me some approximate date in the backups progression. But the way to select a file, I found, is through arrow-keys. I can get to the right directory before starting the Time Machine, and I can navigate to the correct file with much delay using the arrow-keys. In short, it's a major freaking pain, because of all the lag and invisible mouse.
But I was able to do what I needed, given enough pain and perseverance.
Question: Given the impoverished visuals for mouse operations, is there a way to do this on the command line, not through the moving galaxy syntactic sugar that just gets in the way? Can I run the whole restore operation in Terminal? Of course, still via Back to My Mac, because I don't know how to get to the remote iMac in any other way remotely, given that it sits behind a cable modem and a Time Capsule router with NAT. And I don't want to set up port forwarding, if I don't have to.
Thanks for reading, and I'll take your considered expert advice.
-- Marek

Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
Thank you all.

The wait operation time out

Dear all,
I am facing one problem with my user pc "The wait operation time out"
ERROR=
Aconnection was successfully established with the server. but then an error occurred during the pre-loging handshake. (provided , SSL providing error-0 , The wait operation time out microsoft SQL server error- 258.
my user-pc use windows 7 and connect VPN by using "Sonic-wall" we connect successfully and get my remote server IP ping reply but when try to access remote server database that time I am getting this error
At the same time using same network and id can connect the server from vpn and access database from other
system.
please help me sort it out this issue.
thanks
sajal

Hi Sajal,
It is possible that remote machine(server) is up but please check whether database server is up or not.
Please contact database administrator to know the status of database. This will help you to know the cause.
If database is down you cannot connect it.

One Time Vendor Master

Hi
In one time vendor master data
1. Can we get party-wise payment report at a later date without party code by just giving name of the party? If yes, party codes for one time payments are not required.
2.whether any payments are made to the party three years back. Can we check without party code?
3.Service Tax department also regarding payments made to a certain party for the past 3 yeas.
Thanks
Samson

1. Can we get party-wise payment report at a later date without party code by just giving name of the party? If yes, party codes for one time payments are not required.
You need to use the one time vendor party, there is no functionality getting reports with giving the name of the party.
2.whether any payments are made to the party three years back. Can we check without party code?
Refer answer for point 1. If you do not archieve the line items, then you can go back to any number of years to view the payment history.
3.Service Tax department also regarding payments made to a certain party for the past 3 yeas.
F.12
S_ALR_87009909 Annual Tax Return (Belgium) >
S_ALR_87009914 Annual Tax Return
S_ALR_87009916 Annual Tax Return
S_ALR_87009917 Annual Tax Return: Customers/Vendors
S_ALR_87009918 Annual Tax Return: Customers/Vendors
S_ALR_87012371 Annual Tax Return (Belgium) >
S_ALR_87012376 Annual Tax Return
S_ALR_87012378 Annual Tax Return
S_ALR_87012379 Annual Tax Return: Customers/Vendors
S_ALR_87012380 Annual Tax Return: Customers/Vendors
Regards,
Ravi

Modify code to pull the time dependent master data

I fully under stand the suggestion below for the requirement to add the time dependent attribute comp code
thanks fo rthe help but please tell me if there is a way i can modify the abap code and make the user enter the value for the date on which he want to pull th emaster data for company code or keydate to and from and pull the master data, so how will i proceede should i create the variable on 0doc_date and how to modify the code. please help . i have opened another question with same desc as above to assign points
thanks
soniya
The literal within <..> is supposed to be replaced by the actual field name (as I didn't know the fields). In this case, I am changing your code for costcenter/company-code.
data : wa like /bi0/qcostcenter.
select single * from /bi0/qcostcenter into wa
where costcenter = comm_structure-costcenter
and objvers = 'A'
and datefrom le comm_structure-<keydatefield>
and dateto ge comm_structure-<keydatefield>.
if sy-subrc = 0.
result = wa-comp_code.
endif.
abort = 0.
You can use this code for update rule of company_code. You have to replace '<keydatefield>' with a field name that contains the date on which the company is to be derived. If there is a date in your comm_structure (eg aedat) which you can use, you can specify that field in place of this literal (instead of comm_structure-<keydatefld> use comm_structure-aedat). If you have no such field, and you wish to use current date for getting the company code from time-dependent master data, you can use sy-datum (ie replace comm_strucutre-<keydatefld> with sy-datum).
And it should work.
The 'master data attribute' option is one of the options when you create update rule (one of the radio button options).

That the code is doing anyway.
If your txn data in the cube doesn't have a date, how does it know it is Feb data, or, it is March data?
If it has a date or month field, you should modify and use this code to update the company based on that date instead of system date.
Other than that minor variation, it is already doing what you look for.

Ssh operation time out

In my office, I have a MacBook and a Mac Pro. I tried to ssh to the Mac Pro from the Macbook and got the "operation time out" error. I am able to ssh to a Linux box from my Macbook.
Anybody has encountered this? Thanks.

I solved the problem.
I should select "set access for specific services and applications" in Preferences/Security/Firewall.

One time Vendor Master record

Can anybody please suggest me the process of uplifting a one time vendor master to regular vendor master

Hi,
The onetime(purchasing) account group can not be converted to regular vendor account group .For this you have to create a new vendor code with regular account group and refer only the onetime vendor code.
Dhruba

Operation time in master reciepe

Similar Messages

Maybe you are looking for