Operations i PM orders

Do you know how to insert new operations in the PM order between existing
Thanks
BS

Hi BS,
If you have only a few ops, you can for example edit the op number, eg if you want a new op between 0010 and 0020, you can add an op 0015.
I must admit, I am not sure what you would do if you had a large number of ops you want to insert. Probably renumber some of the bottom operations and then insert the new ops in the space created. I will see if I can find an automatic way to do this....
Hope it helps a little.
rgds
John

Similar Messages

Custom exit or badi for changing the user fields in operation of process order

Hi all
    I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
    I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
    I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
    Do you have any solution for this question?
Thanks

Do a Implicit Enhancement at the PBO of this subscreen.

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

Scheduling issue for splitted operations in process order

Hello All,
I am facing problem after scheduling splitted operation in process order. The scenario is as follows.
In process order there are 5 operations. 10, 20, 30, 40 and 50. Out of the above operations 30 is splitted and two different resources are assigned to it. Control key assigned to splitted operation (30) is also scheduling relevant. Now the flow of operations will be as below.
1. Operation 10
2. Operation 20
3. Operation 30 - Operations is splitted (Resource used is A), qty to be produced - 10 kg.
a. Operation 32 - Quantity of operation 32 is changed to 5 kg. Resource used is B.
b. Operation 34 - Quantity of operation 34 is changed to 5 kg. Resource used is C.
4. Operation 40
5. Operation 50
Relationship exists between opearion 10-20, 20-30, 40-50 and between 30,32, 34 with 40. But there is no relationship exists between splitted operations 32 and 34 with any of the previous operations for eg. 10 & 20.
Issue is after scheduling all operations relationship remains maintained between operations 32, 34, 40 & 50. As operation 30 is splitted to two different operations equally total time for scheduling gets reduced but after scheduling of all operations all previous operations before operations 30 does not get resceduled? Scheduling type maintained for order is Backward Scheduling.
Please check this and guide me how all operations before operation 30 can be rescheduled as per changed timing of operations 32 and 34.
Best Regards.
Edited by: Avinash Mohite on Mar 19, 2010 12:43 PM
Edited by: Avinash Mohite on Mar 19, 2010 3:14 PM

Hi,
I hope u r doing in this way:
In the capacity header screen enter individual capacity as 2. then click on Got( on top of same screen) and go to individual capacites. Enter the names of two individual capacities, for example 1 and 2. These are the names of two work centres where u r splitting ur operation.
Double Click on operation 0030 and go to tab 'splitting' . Tick on ' required splitting' and enter maximum no. of splits as 2.Then go to capacity requirements assignment tab. enter the individual capacity as 1 and 2 and enter the splitted quanitites.Save and reschedule .
Check and revert.
Regards.

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Function module to get PRT for the operation in Maintenance Order

Hi,
Please tell me the function module to get PRT document for the all operation in Maintenance Order? and also tell me the FM to get all details of those PRT Docs so that I can Print those documents.
Thanks.

Hi,
Please tell me the function module to get PRT document for the all operation in Maintenance Order in TCode IW31/32/33? and also tell me the Function Module to get all details of those PRT Documents so that I can take Print out of those documents.
Thanks,
Jay.

How to manage the operations on service order ?

Hello,
Do you know some bapi or MF to manage the operation on service order (IW32).
I have to create some operation, and in dialogue mode Iu2019m using
"Task list selection, to reference object."
But I need to do it by a bapi or MF.
Tks a lot.
R.

Hi,
Check with the following FM:
MAINTENANCE_ITEM_POST
Regards,
Venkat.

To Control status of the operations of maintenance orders individually

Hi,
To Control status of the operations of maintenance orders individually
Anyone know how to control individually the operation status of maintenance orders?, see the image below?
Exsample: I need complete (TECO) only the operation 0010
Thanks,
Adilson Delfino

Adilson Delfino
The system-statuses cannot be set manually by the user (like you can with user-statuses).
You need to process a function to make these statuses change, e.g. releasing the order header, TECOing and order or dispatching operations. Alternatively you can develop a solution that may be able to change these statuses (see above post).
I don't think you will be able to set the TECO status on individual operations.
Have you considered user-statuses on the operations?
PeteA

DIServer insert operations for sales orders with error

DIServer insert operations for sales orders with
That even though the insert is inserted DocDueDate DocDueDate it says error.
Subtracting the value of the format 'yyyy-mm-dd', 'yyyy/mm/dd', 'mm-dd-yyyy', 'mm/dd/yyyy' put all reporting
When the input is entered DocDueDate ShipDate also put together ... but I get an error.
The error message 'env: Receiver-10Enter due date [ORDR.DocDueDate] 171AddObject2EEE7D98-AB71-464A-93AB-933F0AD3D4DC'
Purchase order entered into the normal value because the xml is missing or wrong with you.
Please answer all the possibilities that can be resolved
This Xml used.
"<BOM>" +
"<BO>" +
"<AdmInfo>" +
"<Object>oOrders</Object>" +
"</AdmInfo>" +
"<QueryParams>" +
"<DocEntry />" +
"</QueryParams>" +
"<Documents>" +
        "<row>" +
        "<DocType>I</DocType>" +
        "<DocDate>2012-01-11</DocDate>" +
        "<DocDueDate>2012-01-11</DocDueDate>" +
        "<CardCode>CD00001</CardCode>" +
        "<Address>Anymode</Address>" +
        "<DocCurrency>KRW</DocCurrency>" +
        "<Comments>[sales orders] LGU TEST</Comments>" +
        "<TaxDate>2012-01-11</TaxDate>" +
        "<JournalMemo>JournalMemo</JournalMemo>" +
        "<Address2>Addr</Address2>" +
        "<BPL_IDAssignedToInvoice>1</BPL_IDAssignedToInvoice>" +
        "</row>" +
"</Documents>" +
"<Document_Lines>" +
        "<row>" +
        "<ItemCode>ACDT0100ET</ItemCode>" +
        "<Quantity>1</Quantity>" +
        "<Price>5000</Price>" +
        "<DiscountPercent>10</DiscountPercent>" +
        "<WarehouseCode>A100</WarehouseCode>" +
        "<VatGroup>A2</VatGroup>" +
        "</row>" +
"</Document_Lines>" +
"</BO>" +
"</BOM>";

I had the same error change the Date to the format yyyymmdd, and problem solved.

OPERATION CHANGE IN ORDER

Hello Experts,
I have an issue regarding process order.
If i add an operation while process order creation then will it get updated in recipe master table PLPO.
Or suggest me an table in which i can find this updated values of operations.
Thank you.
Regards,
Ashish
Moderator message:
Locked. Reason: improper use of capitals in subject line.
Please read rules of engagement before posting.
Edited by: Csaba Szommer on Feb 1, 2012 8:37 AM

HI
Check Table S022: SFIS: Order Operation Data for Work Center for order no AUFNR as input.
Regards
Anupam Sharma

Routing number of operations and reference operation in the order

Hi experts,
If anyone knows about Routing number of operations and reference operation in Maintenance order , please explain.
is it used for maintenance order? if yes, please mention the path from which I can see or note the number generated by the system as Routing number of operations or operation task list no. or reference operation
Regards,

Hello,
Routing number of operations in the order"(field-->AUFPL) of the order at table AFKO, using order number. Find the Operation counter number of the operation at table AFVC using "Routing number of operations in the order".
From above we can fetch the Operation Level data of Order by using the Routing number of operations in the order"(field>AUFPL) .Routing number of operations in the order>which solely identity of the Operation for your order after creation of order it is created this number.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 23, 2010 2:47 PM

Make Deletion Status for Operation in Prodcution Order

Hello Experts,
Is there any Function Module or BAPI to make status for Operation as deletion in production order. i.e I0013 is the status for the operation.
Thanks In Adavnce
Dhiraj Dangore.

Hello,
Thanks for reply..
Let me explain the process we are following
I have two operations in an order.
Operation 1) Control Key M111(Internally Processed) - One component attached for this operation ( its a not stock item)
PR, PO and GR has been done and no issues in that.
Operation 2) Control key M222( Externally Processed) -
a) One Service attached with this operation which i want to delete from the order.
b) One Component also attached ( non stock item) and PR , PO, GR has been done for same.
For point a : Service is present in PR but not released therefore no PO , GR is done.
Now when i try to delete this serive from the operation then system does not allow me to do so. Also i want to delete from PR too and again i was not able to delete from it.
Please let me know how this can be possible.
Rgds
Himanshu

Check of operation sequence in order

Hi all,
I don't want to check of operation sequence in order. so how can I do this? Are there any customizing for this case?
Best regards,
Hilal Çakır
email : [email protected]

Make the following changes in control key or use the control key which have this setting
In OPJ8, for a control key
Confirmation = Confirmation possible but not necessary
In OPK4, for a plantb and production order type combination in Generally valid settings tab page -
Checks sub page
operation sequence = set operation sequence is not checked
With this setting it will work

MF41 Error - No operations exist in order X

We tried to reverse a repetitive manufacturing entry via MF41 and received the error message RU008 "No operations exist in order XYZ" - As far as I know, we did not receive any errors at the time that the original confirmation was completed. We did however have to delete and reroll standard costs during the month after the original confirmation was completed. Not sure if MF30 was ran after the new standard costs were released. I'm sure that it is probably tied to the standard cost issues, but would really like to know if there is a different direction that I should be looking at?
Thanks,
Amy

Thanks for the response, but MFBF or MF40 requires that you use MF41 to reverse. MBST or MB1A will not work for repetitive mfg.

Operation on production order - what is the object (BOR) to manage it ?

Hello,
I have to call a workflow when an operation on production order is confirmed, or partially confirmed, or deleted.
What is the business object to use to manage it ??
Tks,
Roberto.

Hello Uma,
yes, right...
yesterday, I was not able to see the trace when I deleting a production order becuase the object BUS2005 was not
active on customizing:
after I found it
No business object triggered for production order creation
end now is showed...
SO, we have to use BSVW ... and so the consequences is : How to know what is the object BOR to activate !??!?!
tks

How do we can change the last done dates of Planned operation by EM orders?

Hi colleagues
i defined four opertions for one equipment as performance based or time based plans and scheduled it for next month. then we received a EM notification for mentioned equipment. we iisued order for EM notification and maintenance opertor carried out the orders but while he doing the EM process , he did two opertion of preventive maintenance from mentioned plan.
we can add mentioned operations in EM orders as operations but the question is that after we confirm the EM orders and enter the actual dates , and it seems that the last done dates of assigned two operations must be change in PM plans.!
Is there any solution for it or not?
Thanks
Akbar

Hi Carlos
thanks for ur attention
actually i want change the last done dates of some opetions in my scheduled maintenance orders by assigning them to EM orders as operations.
for example:
i received a EM orders with this description : oil leakage from sight glass of hydraulic pumps
in the proceesing of EM order , i will eliminate the leakage and also change the oil of pump .
the changing the oils is the one of our shecduled Maintenance plan that is it would be called on next month.
in the confirmation of EM order , i will add this operation from equipment task list ( change the oil) and enter the dates and another data.
it's obvious that mentioned opertion should not be schedule on next month and according to it's package sequence , the new date for changing the oil must be 3 month later form the date that we entered on EM order.
Thanks
AKBAR

Operations i PM orders

Similar Messages

Maybe you are looking for