Operations in result row

Hi all,
I have a query that uses a normal key figure, an exception key figure and a formula on the query. The results of my query look something similar to this:
CHAR | NKYF | EKYF | (NKYF/EKYF)
cha1 | 150 | 10 | 15
cha2 | 200 | 20 | 10
cha3 | 180 | 15 | 12
RESULT | 530 | 20 | 26.5
Because of the exception in EKYF the result doesn't match the sum of all rows (that is 45). In order to accomplish this i specified, in EKYF attributes, to calculate result as Sum.
Now EKYF shows the sum of all values (45)... but my problem is that the formula (NKYF/EKYF), instead of showing 11.78 (f=530/45); it still shows 26.5. Here's how the result table looks like:
CHAR | NKYF | EKYF | (NKYF/EKYF)
cha1 | 150 | 10 | 15
cha2 | 200 | 20 | 10
cha3 | 180 | 15 | 12
RESULT | 530 | 45 | 26.5
Is there any way to force the result of my formula to make the correct operation?
Thank you all for your help,

Hi All
Thanx for all the responses. Unfortunately, none of the suggestions have had the desired effect.
When I use the exception aggregation, the result is either 1.08 or 0.25, depending on which characteristic I am using.
When I use the first value, the result is 0.75.
And, as there are no collisions, the "Result from this formula"/ "Result from competing formula" does not appear on the formula's properties.
Whichever way I am trying, the formula either wants to add up the results of individual lines or break the formula down to it's lowest components, i.e. either 0.75 + 0.33 or (6000 + 4000) / ((10000 + 16000) * (0.80 + 0.75)) which results in either 1.08 or 0.25 (I noticed I made an error on the example I gave).
The result that I require would be (6000 + 4000) / (8000 + 12000) giving me 0.50.

Similar Messages

Key Figure Summation in Result Row with Cumulation Ticked

Hi,
I have a Bex question regarding the summation rows.
I need a Year To Date amount and a Period To Date amount in the report. However, there is no Year To Date key figure available in the cube. So in order to calculate YTD, I'm using the PTD key figure and have Cumulated box ticked mark in Bex.
All looks fine across columns per Vendor. But the results row for the Cumulative Balance is always equal to the results row for Period Balances. I believe this is because the same key figure is used, and it is only reading the amounts in the cube - not the ones calculated on the fly.
Does anyone know how to correct the results row for a cumulated key figure?
Regards,
Rhonnie

You have to create two restricted KF; one is PTD restricted to period; the second is PTD restricted in a period range from 01.yyyy to current period.
Hope it helps.
Regards

How to display Average, not Sum, in the "Overall Result" row of a report?

Every report I look at or execute that has an Overall Result row always shows a total(sum) of all the cells in the column. I recently came across one that shows the average of all the cells in the column and after looking at the query in BEx Query Designer 7.0 and BEx Analyzer 7.0 I cannot seem to find out where to set this. All of the Key Figures are listed as "Nothing Defined" in the Calculations tab which is exactly what they should be, but where can I set that yellow-highlighted Overall Result row to calculate an average, not a sum?
Example can be found in this picture:
http://img87.imageshack.us/img87/6757/pic1yp.jpg
Thanks for the help!

My issue was that I was setting my KF's to 'Calculate Result As: Average' within the Query View that I was editing but the change was not showing on my screen when I have that View opened within the Analyzer. Infact, it still is showing totals. But when I execute my Web Template that references this Query View, the graph does display the result row using Averages. Seems to just be a visibility bug, but it is now working.
Thanks for the reminder about that property KP,
Scott

How to change default for Suppress Results Rows

Hi,
Does any one know a way to change the default value for the "Suppress Results Rows" from "Never" to "Always" under characteristic properties in a BEX query?
Every time we build a new query we have to go to each characteristic and change most of them to "Always". Want this to be a system wide change that would affect all new queries or existing queries that are being modified by adding new characteristics.
Thanks,
Mike

Hi Mike,
This property is controlled by domain RRXNOSUMS. You can change the default value to point from "Blank" to "U", I suppose. Haven't tried this though and I am not sure if it is okay to play around with the SAP settings. But if it works for you, do post back.
Hope this helps...

Query designer - supress result rows

Dear Friends,
I do have created a query using query designer. I dont want result rows in my reports both in web template and analyzer. Could anyone help me on defining the same globally?
Regards
Oops

Hi,
You need to select characteristics against which results are displayed for key figures.
In all charcteristcics properites you may find that.
I hope it will help.
Thanks,
S

Overall Result Row is not the Sum of Individual Values!

I am frustrated with a weird problem. I have an expense report in which Expense1 is shown a value of 8,126. If I drilldown by company code, the sum of the company codes is 8,235, but the "Overall Result" row is showing 8,126.
I tried drilling down by GL accounts, cost centers, profit centers, material and even currency. For all of these drilldowns the "Overall Result" row is 8,126 but the individual values sum out to be 8,235.
First I thought it could be "Zero Suppression" that is hiding some values from the display. But "Zero Suppression" was not active at all. I have checked the LISTCUBE and saw that the Expense1 should be 8,235 and not 8,126. The key figure properties "Calculate Result As" and "Calculate Single Values As" are set to "Nothing Defined" and "Use Default Direction". But still for some strange reason, the "Overall Result" row is different than the sum of individual rows. It's driving me crazy as I have ran out of ideas to figure out what's happening. Could someone help me with this? I would appreciate any input with points!

Hi,
Remove the 'Suppress Zero rows/columns' from the query definition and then check the values.
Column A might have value, but for the same row column B might have zero, hence the row was not shown in the result set, but the overall result will include all such values as well, even thought it was not shown in the result set.
HTH,
regards,
Nataraj.

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

How to hide the all rows except the result row in a report?

Hi Experts,
We have a report in which the user is interested to see only the result rows and I need to HIDE the characteristics in the rows. I was successfull in doing the same for Key figures in columns using "Calculate single value as suppress result". But I am not finding a way out to hide the characteristics in the rows.
If I move the characteristics in rows to Free characteristics, the result row is not getting dispalyed. Also, the characteristics are used dynamically by the formulae in columns and hence i cant remove these characteristics from the query. . The user wants the query to contain only one characteristic in the row and the result row for the key figures in columns. The report currently displays Invoice level data for each customer and this needs to be eliminated and it should display the summarised data for every customer. Please suggest how this can be accomplished
Regards,
Kavitha

Moving the char to free char will show the equivalent of result.
Your issue likely is that this breaks the calculations since you do want the calculations done at detail level.
To achieve this, move your char to free char (say it is 0CUSTOMER).
For the CKF/Formula, go to aggregation tab, set the exception aggregation as Total (or whatever it was in standard behavior) and specify reference characteristic (in this case 0CUSTOMER), also check the 'Before aggregation' if you have that checkbox there.
This will ensure the calculation is done at detail level even though the char is not included in the rows.
If you have multiple chars to be moved to free char but included in detailed calculation, you will need to build cascading CKFs (CKF1 with ref char1, CKF2 eq to CKF1 with exception aggr on ref char2...and so on).
Added:
I understand you do want 0CUSTOMER in there, but something else (let us say 0DOCNO) removed. Use 0DOCNO in place of 0CUSTOMER in the case described above.
Edited by: Ajay Das on Aug 5, 2009 8:57 AM

Position of Result Row in Query

Hi Experts,
I am using Hierarchy in Infoobject, as a result, the query result rows stay in front of characteristic after report was generated:
refer to this picture:
[url]http://imageshack.us/photo/my-images/155/resultrow.png/[url]
is there anyway to move the result row to behind like wat normal queries does?
Thanks.

Hi,
Please check the links:-
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c047853e-15bf-2d10-808a-b81acc227a83
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00d00c2b-5a42-2e10-6288-b9ad2e863761
Hope it helps.
Regards,
Prakash

Conditions for results row in query

Hi,
I've query with conditions. Let us say without conditions query result has 10 records. But After applying conditions result has 4 records.
When you check the result row the subtotals and totals are coming wrong. Result rows are considering the 10 records.
How can I get the result row has to consider only those 4 records after conditions.

Hi,
I have the same problem. And I didn't find any solution.
kind regards
Tobias

Wrong value in Result Row in a query which includes 1:N relationship SO/Inv

Dear all,
I have an InfoSet which includes sales order DSO, PO DSO and Invoice DSO. The purpose is to design a report to show 3rd party order flow.
Now I met an issue if one sales item contains multiple billing doc. Below is an example:
Sales doc: S001   order Qty is 600, there are two invoices for this order B001 invoice 200 and B002 invoice 400. Now in report we see below:
Sales Doc. --   Invoice no.   --- Order Qty --   Invoice Qty
S001 ---B001         -
       600        -
         200
S002 ---B002         ---        600         -
        400
Result Row     -
                                 1200      ---            600
We can see in Result Row totsl order qty is 1200 which is wrong.
I am wondering if anybody have such experience and the method soving this problem ? Many thanks in advance !

Hi,
Normal aggregation calculates the result row as a summation. However, you can change this default behaviour by using Exception aggregation at "Order Qty" key figure.
You can find a detailed article with examples about Exception aggregation at:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0b8ed5b-1025-2d10-b193-839cfdf7362a
I hope this helps you.
Regards,
Maximiliano

Display only the result rows only by using condition or any other way

Hello Everybody,
I've a web report where I want to diplay ony the result rows and don't want to display the detail rows at all. I could hide the detail rows but these rows still appear without any value in the key figure fields.
I tried to revove the characteristic field from the drilldown but it doesn't show the report correctly. Then I tried to write a condition to filter the detail rows but this condition doesn't apply to the result rows so this effort also didn't work for me.
Is there anyway we can display the report with only the result rows ? I've already tried to find out a solution on SDN but couldn't get the solution eventhough I found many posts on this kind of requirement.
Any help would be greatly appreciated.
Thanks
Alok

Please explain when you say
"I tried to remove the characteristic field from the drill down but it doesn't show the report correctly"
What is problem there? What result do you get. If possible please provide details of columns layout and few numbers

Charts (Line chart) in apex 2.0 /3.0 limit of resulting rows in char area

Hello @apex experts,
does any body knows if there is a max number of resulting rows by using a line chart. It seems that until 150 resulting rows all is o.k. but when I try to get a line - chart area for a whole year (365 days) no chart is displayed. I spread out the chart area to 2056 x 800 px but no restult is displayed by using the > 300 resulting set.
Regards and thank you for help

I changed this and put usage of UTL_FILE into a dynamic PL/SQL. The package will
compile and work unless you want to create debug information. If yes, then it will raise an
error message. So, you don't need UTL_FILE execution priviledge from your DBA.
I opened the package and you may modify it the way that you don't need any public
synonyms and no UTL_FILE to run it.
There are so many questions in this forum related to "What is my DBA going to say?" or
"How is he going to react?". Even for some minor issues. I have myself also seen some
of similar situations and the only thing I can sey is:
You got to use that powerfull tool Oracle Database instead of hiding it away from your
users and developers. Learn how to control it instead of prohibiting access to it! Otherwise,
it's just a waste of money.
Denes Kubicek

Web Template with document icon in result row

Hi All,
I have a web template created in WAD 7.0.
It has Analysis item with a Query as dataprovider.I have checked the "Document Icons for Data" to On in the cell content section of Analysis Item.
In query property also,Document link for infoprovider option is checked.
It is displaying the document icon in data cells correctly wherever comment is entered.But it also displays document icon in the result row cells.
I do not want to display the document icon in the result row cells.
Please help in this regard.
Thanks.

Have you considered creating and using query views?

WAD result row in the name of the WAD report

Hi,
My requirement is we need to show summary of the result rows in front of WAD report output. Is it possible by any means please let me know.
amit

our requirement is top management should get summary report like this e.g
WAD output as of now we have.
> costing report (Heading of the report) (compress)
> Query result (at the top or at the bottom)
I need Query result should appear at top level before clicking on heading costing report.
Please let me know if anything required above.
amit

Operations in result row

Similar Messages

Maybe you are looking for