Operations Manager 2012 R2 Management Pack importing issue

Hi
I seem to be having an issue importing certain management packs, when i do i get the below error:
Windows Server 2008 Operating System (Monitoring) could not be imported.
If any management packs in the Import list are dependent on this management pack, the installation of the dependent management packs will fail.
Verification failed with 2 errors:
Error 1:
Found error in 2|Microsoft.Windows.Server.2008.Monitoring|6.0.7296.0|Microsoft.Windows.Server.2008.Monitoring|| with message:
Could not load management pack [ID=Microsoft.Windows.Server.2008.Discovery, KeyToken=31bf3856ad364e35, Version=6.0.7296.0]. The management pack was not found in the store.
: An error occurred while loading management pack b4bda654-49bd-6e04-ca24-e152fc227001 from the database
Error 2:
Found error in 2|Microsoft.Windows.Server.2008.Monitoring|6.0.7296.0|Microsoft.Windows.Server.2008.Monitoring|| with message:
Could not load management pack [ID=Microsoft.Windows.Server.Library, KeyToken=31bf3856ad364e35, Version=6.0.7218.0]. The management pack was not found in the store.
: Version mismatch. The management pack ([Microsoft.Windows.Server.Library, 31bf3856ad364e35, 6.0.6957.0]) requested from the database was version 6.0.7218.0 but the actual version available is 6.0.6957.0.
Please can someone advise.
Regards
Adrian

Hi,
Solution: An exception is thrown while importing the Red Hat Linux Management Pack for Operations Manager 2007
http://blogs.technet.com/b/operationsmgr/archive/2010/12/15/solution-an-exception-is-thrown-while-importing-the-red-hat-linux-management-pack-for-operations-manager-2007.aspx
Based on this case, the issue might be resolved by re-importing the Microsoft.Windows.Server.Library Management Pack.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • SCCM 2012 Non-MS License import issue.

    Hi All,
    I am trying to import non-ms licenses in SCCM 2012 but its not letting me to import. I amusing the attached sample csv. but every-time I am getting error that import failed.
    Link for both CSV & Image as follows ... Changed Url as
    http:// 1drv.ms/1g1LZaN

    Hi, I am using the same sample CSV in same format, but no luck. EG Below.
    Name
    Publisher
    Version
    Language
    EffectiveQuantity
    Adobe Acrobat 4.0
    Adobe
    999999
    Adobe Acrobat 5
    Adobe
    5
    999999
    Adobe Acrobat 7 Professional
    Adobe
    7.1
    999999
    Adobe Acrobat 7 Professional
    Adobe
    7
    999999
    Adobe Acrobat 8 Professional
    Adobe
    8
    999999
    Adobe Acrobat 8 Professional
    Adobe
    8.1
    999999
    Adobe Acrobat 9 Pro
    Adobe
    9.5
    999999
    Adobe Acrobat 9 Pro
    Adobe
    9
    999999
    Adobe Acrobat 9 Pro
    Adobe
    9.2
    999999
    Adobe Acrobat 9 Pro
    Adobe
    9.4
    999999
    Adobe Acrobat 9 Pro Extended 64-bit Add-On
    Adobe
    9
    999999
    Adobe Creative Suite 3 Master Collection
    Adobe
    1
    999999
    Adobe Creative Suite 4 Design Standard
    Adobe
    4
    999999
    Adobe Creative Suite 4 Master Collection
    Adobe
    4
    999999
    Adobe Creative Suite 5 Design Standard
    Adobe
    5
    999999
    Adobe Creative Suite 5 Master Collection
    Adobe
    5.5
    999999
    Adobe Creative Suite 5 Web Premium
    Adobe
    5
    999999
    Adobe Creative Suite 5.5 Design Standard
    Adobe
    5.5
    999999

  • Operations Manager 2012 R2 Unix/Linux agents installation

    Hi!
    I want to monitor some Linux (RH6) servers with Operations manager 2012 R2. I successfully imported necessary management packs… and then I’m lost. I cannot discover Linux clients
    from console. And I can’t find good guidance how to deploy and manage Linux clients. Can anyone direct me to any step-by-step guidance?
    And, do I need certificates on SCOM and on Linux clients?
    Thanks,
    UV

    To discover and monitor linux client, you can refer to below link
    http://technet.microsoft.com/en-us/library/hh230722.aspx
    For Importing Management of linux (RH6), you will need to download management of linux from below link
    http://www.microsoft.com/en-us/download/details.aspx?id=29696
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

  • Management pack version difference in System Center - Operations Manager 2012 R2 - Help us.

    Hi,
    I have SC Operation manager 2012 r2 in my environment. It has managed with multiple management servers.
    I have import some unsealed MPs through Ops SDK code and by manually using Operation manager console.
    Here with i tried to install higher version of MPs and upgrade its version from 1.1.0.0 to 6.0.0.0.
    case 1:
    After successful installation of some MPs and check Operation manager console, it showing newly upgraded version(6.0.0.0).
    Then i have import that MP and checked its version inside it showing 1.1.0.0(older version).
    Here the imported MP has 1.1.0.0 version and console showing its version as 6.0.0.0.
    Why it showing different versions in imported MP(inside xml)  and Operations manager console view?
    case 2:
    After that i tried to import other MPs using console. But it showing below error;
    Verification failed with 1 errors:
    Error 1:
    Found error in 2|Monitoring.ActiveDirectory_server|6.0.0.0|Monitoring.ActiveDirectory_server|| with message:
    Could not load management pack [ID=Monitoring.Base, KeyToken=9e875220a3987e0b, Version=6.0.0.0]. The management pack was not found in the store.
    : Version mismatch. The management pack ([Monitoring.Base, 9e875220a3987e0b, 1.1.0.0]) requested from the database was version 6.0.0.0 but the actual version available is 1.1.0.0.
    Its happened in  multiple management servers scenario. So Is any possibility to happen because of multiple management servers scenario?. There is no issues in this same MPs while i tried in single management server. These same MPs are imported and working
    fine in single management server scenario.
    Help me to solve these 2 issues!!
    Thanks,
    satheesh

    1) At first, you should make sure that the imported MP has correct version. I will open the XML of the imported MP and check its current version e.g.
    When you open the xml file of imported MP, the version number is shown as
    <Manifest>
        <Identity>
            <ID>Microsoft.SystemCenter.Visualization.Component.Library.Resources</ID>
            <Version>1.0.0.2</Version>
        <Identity>
        <Name>Resources library</Name>
        <References>
            <Reference Alias="System">
            <ID>System.Library</ID>
            <Version>1.0.0.1</Version>
    From the above sample, the imported MP version number is 1.0.0.2.
    2) I am using operation console to import the management pack and check the version number in operations console whether it is updated to new version 1.0.0.2
    3) Using operations console to export the MP which has imported in step 1) and open it to check what is the version number of MP. Make sure that the version is 1.0.0.2
    4) If the above procedure provide a prefer match of version number, re-import all problematic MP.
    5) At last, you may use the following SQL to check whether the correct version number of MP is stored in DB successful
    select version, friendlyname from managementpackview where friendlyname like 'Microsoft.SystemCenter.Visualizatio%'
    Roger

  • After creating a Powershell script monitor - how to import in Operation Manager 2012 ?

    Hello!
    I just completed all the steps in this article:
    http://social.technet.microsoft.com/wiki/contents/articles/16752.management-pack-composition-exercise-2-creating-a-monitor-based-on-a-windows-powershell-script.aspx?CommentPosted=true#commentmessage 
    So now I guess that the just created Management Pack should be imported in Operation Manager 2012, and then also folders and views should be created in order to have it showing green/red based on the values returned by the script.
    In the article there's no pointer to that procedure, so can you please provide a good link where the steps are explained?
    thanks!

    Have a look at the following video, it steps through how to create rules and monitors using PowerShell scripts
    https://technet.microsoft.com/en-us/video/how-do-i-create-a-rule-and-monitor-using-a-windows-powershell-script-in-a-system-center-operations-manager-management-pack.aspx
    Cheers,
    Martin
    Blog:
    http://sustaslog.wordpress.com 
    LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

    I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
    I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
    http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
    For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
    and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

    Import Management Pack from DVD disk SCOM 2012 R2
    SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
    Have a nice day !!!

  • The Management Pack Import Failed - Upgrading to R2 and SCVMM 2012

    Just finished applying UR4 to my Service Manager 2012 R2 environment. One of the final steps has you copy these MPs from your Virtual Machine Manager server to the Service Manager box.
    Microsoft.SystemCenter.VirtualMachineManager.PRO.Library (3.2.7510.0)
    Microsoft.SystemCenter.VirtualMachineManager.PRO.V2.Library (3.2.7510.0)
    Microsoft.SystemCenter.VirtualMachineManager.Pro.2008.Library (3.2.7510.0)
    Microsoft.SystemCenter.VirtualMachineManager.Library (3.2.7510.0)
    Microsoft.SystemCenter.VirtualMachineManager.2012.Discovery (3.2.7510.0)
    I was able to import three of them, two failed with errors that appear to say specific MPs were not found. Do I need to import these additional MPs into Service Manager? This is one of the errors.
    The management pack import failed.
    Errors (8):
    Could not load management pack [ID=Microsoft.SystemCenter.DataWarehouse.Library, KeyToken=31bf3856ad364e35, Version=7.0.8427.0]. The management pack was not found in the store.
    : An error occurred while loading management pack c183c241-e7b5-a06f-d6d9-2d573485b91e from the database
    Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.2008, KeyToken=31bf3856ad364e35, Version=6.0.6539.0]. The management pack was not found in the store.
    : An error occurred while loading management pack 1784bf83-89c5-68e5-2220-44d2c1715753 from the database
    Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.CommonLibrary, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
    : An error occurred while loading management pack b739b9de-7c04-f1b9-fc56-4a118a6316ec from the database
    Could not load management pack [ID=Microsoft.SQLServer.Library, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
    : An error occurred while loading management pack bcd6dccf-c46c-a1f5-3c8d-bb4e99e2a6a3 from the database
    Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.2003, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
    : An error occurred while loading management pack 7a920be5-d53c-fa2d-07a8-b415265e95b0 from the database
    Could not load management pack [ID=System.Virtualization.Library, KeyToken=31bf3856ad364e35, Version=7.0.8430.0]. The management pack was not found in the store.
    : An error occurred while loading management pack 474758fc-8648-c776-09f5-4033ee51efee from the database
    Could not load management pack [ID=System.NetworkManagement.Library, KeyToken=31bf3856ad364e35, Version=7.0.8560.0]. The management pack was not found in the store.
    : An error occurred while loading management pack dc6f8cbc-d89c-00bd-58eb-49a6d98d42b2 from the database
    Could not load management pack [ID=Microsoft.SystemCenter.VirtualMachineManager.Library, KeyToken=31bf3856ad364e35, Version=3.2.7672.0]. The management pack was not found in the store.
    : An error occurred while loading management pack 30113716-8134-9c58-5203-358d89357d74 from the database
    Orange County District Attorney

    Hi,
    Those prerequisite management packs should be imported manually.
    Here is a similar thread for your reference:
    How to import VMM2012 Discovery Management Pack into System Center Service Manager
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/2d505f89-f7d5-4e3f-bd22-0ba80451e04d/how-to-import-vmm2012-discovery-management-pack-into-system-center-service-manager?forum=systemcenterservicemanager
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • High Watermark issue with monitoring Service Manager 2012 R2

    Hi,
    Our customer has a Service Manager / Operations Manager 2012 R2 environment where SCOM will regularly generate an alarm related to High Watermark monitoring on the Service Manager data warehouse - not every day though. The alarm looks like this:
    Value of 3559 is not higher than 3559
    This value hasn't changed for weeks.
    Having done a lot of searching we have found nothing but reference to the same recurring flow of information where people keep mentioning different values but there is no conclusion of what this might be caused by and how to solve it. The solutions
    have become outdated anyway. Here is one example:
    http://social.technet.microsoft.com/forums/systemcenter/en-US/889af8f3-cdf8-4d88-ae99-5dbe18d529ef/service-manager-2012-data-warehouse-high-watermark-monitor
    The Service Manager Database Account in SCOM is our service account that has sysadmin in SQL. Basically, with regards to the security configuration, our customer should be covered.
    To my knowledge agent-based and agentless monitoring have both been supported since SCSM 2012 SP1. Also, we have the latest management pack for Service Manager monitoring in SCOM, at the moment this should be
    7.5.3079.0.
    As mentioned above the value has not been changing for quite some time and nor has it in the database.
    My questions are the following:
    - Is there anyone that has found a solution in the meantime, especially with regards to R2?
    - What is the purpose of High Watermark monitoring for the data warehouse? Why does this need to be monitored?
    - We would like to understand the nature of this value better. Should it be higher each day compared to the day before?
    - Could it just be overriden in SCOM?
    Many thanks in advance!

    Rather unexpectedly, the SCOM alarm disappeared overnight and when checking the workflow in the incident that was generated from the alarm, the incident got a Resolved status right before midnight at 23:59:58. We have a ConfigMgr connector that is scheduled
    to run at 23:00 which we had disabled a day ago to check something else. But I don't think it had anything to do with this. As the alarm has disappeared from the SCOM console, we have also checked the registry values. Now, instead of "3559 3559 3559"
    it says "3559 3559 3585". We have had the 3559 value since 18th July, and out of a sudden something must have been triggered, causing the value to increase. What was triggered and how, no idea... Not sure either what it means that only one of the
    Three numbers have been updated with a new value. When talking about the DW jobs, using the SMlets we can see every day that, MPSync, DWMaintenance and the ETL jobs are working well. What we have had though for a longer time is that the cube processing
    tends to have issues once a week, where processing won't finish and the cubes get hanging in a running state. We can fix that manually every time and often we don't even have to touch DWMaintenance or the ETL jobs, we don't need to go beyond manually
    working with the cube processing jobs themselves. So it might not have an impact on the ETL jobs themselves. Occasionally we do find ourselves in a situation where we we need to play around in the SQL database and manually set the required value (can't
    recall if it's 3, 6 or 7) cause we get an error in the DWMaintenance batch, but even though that's an occasional issue it's not constant and also something we can solve, and furthermore it's another known issue outside of the high watermark issue. So
    we are a bit uncertain but can at least see that something works sometimes that sometimes increases the high watermark value :). In our case.

  • OMServer.msi returns error 1603 when trying to upgrade first management server from Operations Manager 2012 SP1 to Operations Manager 2012 R2

    Hi All, looking for some assistance with the following issue.
    We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
    We have completed all the pre-upgrade tasks detailed here
    http://technet.microsoft.com/en-us/library/dn249704.aspx
    We are then following the guidance detailed here regarding upgrading distributed management groups
    http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
    OMServer.log file is as follows.
    === Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
    MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
    MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
    MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
    ******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
    ******* Action:
    ******* CommandLine: **********
    MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
    MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
    MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
    MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
    MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
    MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
    MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
    ******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
    ******* Action:
    ******* CommandLine: **********
    MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
    MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
    MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
    MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
    MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
    MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
    MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
    MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
    MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
    MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
    MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
    MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
    MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
    MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
    MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
    MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
    MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
    MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
    MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
    MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
    MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
    MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
    MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
    MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
    MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
    MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
    MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
    MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
    MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
    MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
    MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
    MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
    MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
    MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
    MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
    MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
    MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
    MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
    MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
    MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
    MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
    MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
    MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
    MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
    MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
    MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    === Logging started: 22/01/2014 10:21:27 ===
    MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
    Action start 10:21:27: INSTALL.
    MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
    MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
    MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
    MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
    Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
    MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
    Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
    MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
    Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
    MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
    MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
    Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
    MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
    Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
    MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
    Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
    MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
    MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
    Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
    MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
    MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
    Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
    MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
    MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
    Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
    MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
    Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
    MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
    Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
    MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
    MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
    Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
    MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
    MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
    Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
    MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
    Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
    MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
    Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
    MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
    Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
    MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
    Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
    Action start 10:21:27: FindRelatedProducts.
    MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
    MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
    MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
    MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
    MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
    Action ended 10:21:27: FindRelatedProducts. Return value 1.
    MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
    MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
    MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
    MSI (s) (D4:34) [10:21:27:527]: Running as a service.
    MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
    Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
    MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
    GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
    MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
    Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
    MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
    Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
    MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
    MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
    Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
    Action start 10:21:27: _AbortIncompatibleComponents.
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
    MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
    MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
    The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
    Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
    Action ended 10:21:27: INSTALL. Return value 3.
    Property(S): DiskPrompt = Please Insert Disk 1
    Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
    Property(S): SCDATABASENAME = OperationsManager
    Property(S): SC_DB_SERVER = SCOM-XXX-AG
    Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
    Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
    Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    Property(S): ProgramFiles64Folder = C:\Program Files\
    Property(S): Privileged = 1
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): DONOTSKIPDELETESERVICES = 0
    Property(S): DONOTSKIPINSTALLSERVICES = 0
    Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
    Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
    Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
    Property(S): NetFxVersion = v2.0.50727
    Property(S): IS_OM_SERVER = 1
    Property(S): InstallAPMAgent = 1
    Property(S): INSTALLLEVEL = 100
    Property(S): ALLUSERS = 1
    Property(S): ARPNOREPAIR = 0
    Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
    Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
    Property(S): ARPHELPLINK = http://support.microsoft.com
    Property(S): MSIRESTARTMANAGERCONTROL = Disable
    Property(S): SQL_PORT = 1433
    Property(S): DbSizeGood = 1
    Property(S): DbFileOptionsGood = 1
    Property(S): DbFilesSpaceGood = 1
    Property(S): DbNameGood = 1
    Property(S): SqlServicesStarted = 1
    Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
    Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
    Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
    Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
    Property(S): MOMSDKPortDesc = Operations Manager SDK.
    Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
    Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
    Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
    Property(S): MOMHSPortDesc = System Center Management Health Service
    Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
    Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
    Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
    Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
    Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
    Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
    Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
    Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
    Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
    Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
    Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
    Property(S): Manufacturer = Microsoft Corporation
    Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
    Property(S): ProductLanguage = 1033
    Property(S): ProductName = System Center Operations Manager 2012 Server
    Property(S): ProductVersion = 7.1.10226.0
    Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
    Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
    Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
    Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
    Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
    Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
    Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
    Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
    Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
    Property(S): VersionNT = 602
    Property(S): DW_DB_SERVER = SCOM-XXX-AG
    Property(S): DWDATABASENAME = OperationsManagerDW
    Property(S): OMDATABASENAME = OperationsManger
    Property(S): MaximumDataAgeMinutes = 10080
    Property(S): MaximumQueueSizeKB = 102400
    Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
    Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
    Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
    Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
    Property(S): SDK_SERVICE_TYPE = 4
    Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
    Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
    Property(S): MaximumForwardedVirtualQueuePercentage = 8
    Property(S): QueueSendDataSinglePriority = 0
    Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
    Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
    Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
    Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
    Property(S): CAN_REGISTER_FOR_MU = 0
    Property(S): MU_SETTING = 0
    Property(S): IS_ROOT_HEALTH_SERVICE = 0
    Property(S): IS_MOM_SERVER = 0
    Property(S): IS_MOM_GATEWAY = 0
    Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
    Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
    Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
    Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
    Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
    Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
    Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
    Property(S): SEND_CEIP_REPORTS = 0
    Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
    Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
    Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
    Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
    Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
    Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
    Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
    Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
    Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
    Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
    Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
    Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
    Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
    Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
    Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
    Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
    Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
    Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
    Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
    Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
    Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
    Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
    Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
    Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
    Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
    Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
    Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
    Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): REBOOT = ReallySuppress
    Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 4472
    Property(S): MsiSystemRebootPending = 1
    Property(S): VersionDatabase = 300
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT64 = 602
    Property(S): WindowsBuild = 9200
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): WindowsFolder = C:\Windows\
    Property(S): WindowsVolume = C:\
    Property(S): System64Folder = C:\Windows\system32\
    Property(S): SystemFolder = C:\Windows\SysWOW64\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
    Property(S): ProgramFilesFolder = C:\Program Files (x86)\
    Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
    Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
    Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Users\scomaction\Documents\
    Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
    Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): MsiAMD64 = 6
    Property(S): Msix64 = 6
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 8192
    Property(S): VirtualMemory = 7854
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = scomaction
    Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
    Property(S): UserLanguageID = 2057
    Property(S): ComputerName = SCOMMS1-VM
    Property(S): SystemLanguageID = 2057
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 23
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 10:21:27
    Property(S): Date = 22/01/2014
    Property(S): MsiNetAssemblySupport = 4.0.30319.17929
    Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): USERNAME = Windows User
    Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
    Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
    MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
    MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
    MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
    MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
    === Logging stopped: 22/01/2014 10:21:27 ===
    MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
    MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
    MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
    MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
    MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
    === Verbose logging stopped: 22/01/2014 10:21:27 ===
    Any assistance anyone can provide will be greatly appreciated.

    Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
    Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
    http://technet.microsoft.com/en-us/library/jj656654.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Interesting SCOM Reports and "Microsoft System Center Virtual Machine Manager 2012 R2 Reports" MP Issue , Some reports appear others don't

    Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
    with scvmm and I’m having issues with the chargeback reporting.
    I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
    completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
    reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
    I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.

    Hi,
    Hope the below link could be helpful:
    Enabling Chargeback in a Service Provider Cloud by Kristian Nese
    http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Questions about Deployment Operations Manager 2012 R2

    Hi Folks
    Questions: I have one infrastructure with Operations Manager 2012 R2, two Management Server.
    Now, I'm trying install feature operations manager reporting in SQL Server.
    added the OMDRA and OMDWWA accounts as a local administrator of the SQL server.
    I'm using media installation Operations Manager 2012 R2, but I'm received erros, any idea? Or I need using media installation Operations Manager 2012 SP1?
    Thanks
    Wilsterman Fernandes

    Hi There,
    I had seen a similar issue here. The error log has a point mentioning " ApplyUpdates: Unable to load QFE file."
    I saw this error on this below thread as well.
    https://social.technet.microsoft.com/Forums/en-US/a10ce69e-2584-4a4d-86b9-64ee8c5bf85d/reporting-services-installation-failing?forum=operationsmanagerreporting
    He said he fully re installed the whole setup and it solved the issue.
    But i understand that is quiet difficult and complicated to do.
    =================================================
    I would suggest you check the permissions again
    1.Does your data reader and writer account have SQL permissions i.e sysadmin permissions ?
    2.Also is your SQL server in the same AD Domain or is it in a different domain ?
    3.Is the SQL Server scale of deployment joined ?
    4. Did you look in the ops manager event logs ? Can you check and post them here plz.
    5. Is the operationsmanager DB and warehouse DB as well hosted on the same SQL server where you are trying to install reporting.
    Gautam.75801

  • 1488: The workstation is no longer imported to the tree from where you are attempting to launch the operation. The Remote Management session cannot proceed.

    After upgrading a Windows XP Pro SP1 machine to the ZfDagent from the
    zfd65u2 patch I receive the following error:
    1488: The workstation is no longer imported to the tree from where you are
    attempting to launch the operation. The Remote Management session cannot
    proceed.
    For now I have went back to the ZfD 4 IR5 agent which doesn't exhibit this
    problem. Any ideas?
    Jim Webb

    Jim,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Installation of Operations Manager 2012 R2 along with 2012

    Hi,
    I have an existing SCOM infra (Single SCOM server with version System Center Operations Manager 2012 (7.0.8560.0) )
    Now I want to deploy SCOM 2012 R2 in 2 servers (Management server, operation console, web console ) on both the machines for high availability.
    My question is - Is it possible to deploy the SCOM 2012 R2 in the existing infrastructure without installation SP1 or any cumulative update on the present server? Since I want to setup the SCOM 2012 R2 on 2 new machines, is it possible to go ahead without
    in place upgrade or do I need to demote the existing SCOM 2012 and then freshly install SCOM 2012 R2?
    Please suggest the best way to move from SCOM 2012 Single server to SCOM 2012 R2 on 2 new machines.
    Thanks in Advance, Any quick help highly appreciated.
    Best Regards
    Krishnakumar B
    Thanks & Regards Krishnakumar B

    Hi,
    If you want to upgrade Distributed Management Group, then each management server must be upgraded.
    Please go through the below links for Distributed Deployment of Operations Manager:
    http://technet.microsoft.com/en-us/library/hh298610.aspx
    The below link is about how to Upgrade Distributed Management Group to Operations Manager 2012 SP1:
    http://dynamicdatacenter.wordpress.com/2013/01/09/upgrade-distributed-management-group-to-operations-manager-2012-sp1/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    Yan Li
    Regards, Yan Li

  • Configuration issue on two items for system center 2012 config manager

    My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
    path is missing for SMSSetup\Bin\x64\ to execute
    Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
    Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
    along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

    OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
    there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
    As mentioned, each product has its own unique dependencies with no true overlap.
    Jason | http://blog.configmgrftw.com

  • Using GTMTool.exe with Operations Manager 2012 R2

    I'm using Operations Manager 2012 R2, and I've successfully used the GTMTool released a few years ago to insert a custom dashboard into a sealed MP folder, but I'm not having any luck creating a Task Pane Dashboard.  I am answering 'Y' at the prompt
    to create the Task Pane Dashboard, but the tool moves on as though I answered 'N' and prompts me for the folder view location for my custom dashboard.  As the documentation states, I've been careful to select the SAME object for all of the dashboard widgets.
    Has anyone successfully used the GTMTool to create a Task Pane Dashboard in 2012 R2?  Or, perhaps the tool isn't compatible with R2 anymore?
    Thanks for your help!

    Hi,
    Based on my research, the tool can work with SCOM 2012, and here are two links regarding to the tool used in SCOM 2012, please follow them to re-create task pane dashboard:
    http://blogs.technet.com/b/momteam/archive/2012/06/12/free-windows-server-2008-dashboards-for-opsmgr-2012-and-tool-to-help-create-your-own-customized-dashboards.aspx
    http://www.systemcentercentral.com/my-experiences-with-scom-2012-dashboards-and-the-new-gtmtool/
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for

  • Wireless Client PING-Based monitor system question

    Hi: I joined this forums because i need to recopilate info about a monitor system. So, i have a relative big wireless network and due to legal instances I MUST use a ping-based monitor system to see the status of my network devices and the final clie

  • Can't get wrt54g2 to connect to WII

    I have tried everything I know wich is not alot, I have a laptop wireless, connected, desktop, that is not wireless. The WII finds the signal but will not connect. Please help.......

  • Help - can't see Aperture library in iPhoto

    I'm following the directions outlined on http://docs.info.apple.com/article.html?artnum=304446 but not seeing the Aperture library. Sharing is turned on in Aperture, and I have the latest versions of both software. A follow-on (probably answered when

  • How to use URL in report

    Hi ALL, i m using apex 4.0, in page edit section, in report attribute, there is option external processing. in external processing, url and link label are two fields. in url: www.oracle.com link label: oracle click on apply changes , but nothing will

  • Got Error Like::com.evermind.server.ejb.TimeoutExpiredException.

    Hi, I have one big application in which we are using oracle9iAS and EJB. While I am searching some data which returns more than 15000 rows then I got Followed Error. I use, Front End ::Swing Middle Ware ::EJB Application Server ::OC4J 9i com.evermind