"Operations Setup" - System not visible

I added two systems (CRM 2005) in SMSY and put them in a logical component as well as in the solution scenario.
If I open DSWP and try to execute "Operations Setup" I can see only one systems although both systems have the flag "Productive" in SMSY.
What am I missing?
Markus

> Go to Operations Setup / Solution Landscape /
> Solution Settings. Pick the "System Group" tab.
> Right click on Systems in your Logical Component and
> select "Put in Solution".
Thank you for your answer - but as stated above the system is already in the solution
I see there
SAP CRM 5.0
and beside that both systems (MTU:100 and MP1:100) - I do see only MP1:100 in the operations setup.
Markus

Similar Messages

Tabs under the operations and operations setup are not visible...DSWP issue

Hi Gurus,
After I select the active solution from DSWP txn.I couldn't see the tabs (Solution landscape,servicce level reporting,system monitoring etc etc)on the right hand side.Left hand side Solution overview ,operations setup,operatiosn tab are displayed...when clicked on one of these nothing is displayed on right side...Could any tell me if there is any configuration problem or any service needs to be activated.
Thanks
Allan

Hi Allan,
Yes, maybe you missed some of the ICF services that need to be activated.
Check IMG:
SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> HTTP Services.
Read all the documentation for each step.
Regards,
Valdecir

Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

Malware? Firefox downloaded "new version 33.02" on my system- not visible afterwards on "about firefox"

The current latest version is 33.1. Please get the newest and latest version at getfirefox.com if this 33.1 is not listed as your current version.

My business system not visible

Hi all,
I created one business system using 3rd pary when I
am going to assign in "Integration Directory" it is not
coming in list. Then when I am trying to create the BS
in SLD with same name and Logical system then it is
showing "Already exits". But in SLD also not
visible...??? What will be reason. How to get my BS in
ID?
regards,
Khaja.

Hi,
It is not added in any other scenarios. When I done "Cache Notification" then I am getting this Error
"com.sap.aii.ib.server.abapcache.CacheRefreshException:
Unable to find an associated SLD element (source
element: SAP_XIIntegrationServer, [CreationClassName,
SAP_XIIntegrationServer, string, Name, is.01.apollo,
string], target element type: SAP_BusinessSystem)
Regards,
Khaja.

AS ABAP System not visible on SLD

Hi Gurus,
We have newly installed a CRM 2007 system (QA) and completed most of the post install activities. We have the requirement of connecting an XI system to the CRM system, and we are trying to configure the SLD. Here we are facing a wierd error. The AS ABAP technical system which is supposed to automatically show up on the SLD, is not seen. The AS JAVA technical system is seen but some details are wrong. Some explanation of the current scenario.
1. Our SLD system is a central system, on which the SLDs of all the systems are maintained.
2. I have maintained the PIAPPLUSER password in T-Code SLDAPICUST. This ID also exists in the XI system.
3. I have executed the T-Code SLDCHECK, and it does not show any error execpt that Business system is missing. I could not create the same as the Technical system is still missing.
4. In T-Code RZ70, I selected all the options, and clicked on activate.
5. I also checked the data in the SLD Data Supplier in the VA of the CRM system, and found all the data to be consistant. I also triggereed the data transfer to the SLD.
Could anyone please help me out in getting the AS ABAP Technical system automatically? Any extra configs I need to do to set this thing right?
Thanks & Regards,
Savan D.
Edited by: Savan Kumar Dundoo on May 19, 2008 7:59 AM

Have you checked [SAP Note 1115244|https://service.sap.com/sap/support/notes/1115244]?
Peter

Service and operation options are not visible in catch event.

I have created a file adapter service and calling the same using throw and catch event.I have created service call type conversation which is configured in throw event with default conversation option.But when i am trying to config same in catch event my service name and operation does come up.
Any idea ?
http://postimg.org/image/orb03h29x/

Hi Madhu,
My Understanding:
1. When you enter the main/header product in the item details, the item catefory for the header product gets determined.
2. Your components can also be seen below as sub-items automatically, but the item category is not determined.
Tell me if my understanding is correct.
If Yes, u need to maintain the item category determination for the sub-items or components as well.
Transaction Type: Put the service order transaction type
Item Category Group: Check the item category group of your component product in COMMPR01 (Material tab/ Sales and Distribution Tab)
Item Category Usage: Leave it Blank
Main Item Category: Put the header product item category
Item category: Put the desired item category here.
Also ensure that in the customizing of the header item category, u have maintained the Structure Scope as A- Single Level Explosion of Structured Products.
Regards,
Shalini Chauhan

FTPS file adapter setup fields not visible after SP13 install

After installation of SP13, I was looking for file adapter FTPS setup (fields described in SP13 release notes). I could not see any. It's just like the old adapter.
Java cryptolib is installed, and we checked it is there.
we recycled the whole thing.
Any idea what could be missing ?

Solved. We had applied SP12 file.
Note that this originates from the SP stack download tool.
We had followed the generic download process and it did not contain the SP13 tpz file.
I tried again this morning, when selecting source sp11 target sp13, The selection of packages selects
SAPBASIS12_0-10002900.zip... and not the SP13 one.
Watch out if you move two SP up !
Detailed solution :
Downloaded the SP13 zip file. the following way.
service.sap.com download/entry by app grp/sap content
process integration (XI content)/ XI_CONTENT_SAP_BASIS/ XI_CONTENT_SAP_BASIS_6.40/DB independant/ selected sp13 from the list
Unzipped, and put the tpz file in the import directory
of the repository. file name is XI3_0_SAP_BASIS_6.40_13_02.tpz
Imported it
And it works now
Thanks a lot for your help.

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

E72 operator's name not visible

Does someone have the same problem? Namely, I can not see full name of my mobile operator in the first line at the main window, right from strenght of mobile signal. The operator name has two words and I am not able to see last three letters of the second word. The date which is in the same line is displayed correctly. What should I do in order to see full operator name?

yes. my last letter of my operator's name is half almost erased

Proxy Runtime for Business System not visible in RWB.

Hi,
We are running SAP PI 7.10 SP7.
The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
There is Business Systems configure for both the Application systems in the SLD from the registration.
In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
Please can you assist in this matter?
Regards
Willie Hugo

Hi,
The problem is solved with patches to the following JAVA components.
MESSAGING 7.19
SAP_XIAF7.17
SAP_XITOOL7.14
Regards
Willie Hugo

Folder created in Windows Explorer not visible in Command Line as SYSTEM user

Hello everyone,
We have an odd behavior with an application installation, which I cannot make much sense of.
We are trying to deploy an application on Windows 8.1 Enterprise x64 which tries to access
C:\windows\system32\config\systemprofile\Desktop during installation.
This folder does not exist by default in a Windows 8.1 installation. Hence we am creating this folder using a VBS script manually. The VBS script also launches the application EXE. The setup itself runs under the SYSTEM account (in order to be deployed using
SCCM).
When the install script is launched, we can see in the Windows Explorer that the "Desktop" folder is created in the systemprofile directory. However, to the setup running under the system account, this folder is not visible.
I have verified this by running a command line prompt under the SYSTEM user and navigating to
C:\windows\system32\config\systemprofile\. Using the "dir" command does not show you a "Desktop" folder under the EXACT same path.
When we create the Desktop folder from this command prompt, the application installs just fine.
What are we missing? Any inputs are highly appreciated.

Hi,
Might this need to quit the command prompt after the folder creation, then reload it to continue the installation of the software?
Best regards
Michael Shao
TechNet Community Support

T43-"Operating System not found" woes

Hey all first time post long time listener, got a t43 thinkpad that will not boot and gets the message,
PXE-E61 - Media test failure, check cable
PXE-M0F - Exiting Broadcom
Operating System not found
First I checked BIOS and found that it was not recognizing hard drive, turned off broadcom, switched around startup hardware,etc etc and nothing still "operating system not found". Set everything to default, again same thing. Then I took out hard drive, and re inserted...again nothing. So I took apart laptop to look at connection on mother board, cleaned everything with dust-off, no visible problem on MB, took off CMOS battery, because I was in the neighborhood and figured it couldn't hurt,and reset CMOS info, put it all together and voila it starts up..midway through transferring files off, the hard drive (I assume) froze up and I had to do a hard reset. On the new boot, same problem as before.
In the interest of price, I heard that the CMOS can drop below a certain voltage and screw with BIOS boot, (although there is no visible change in date/time and lenovo tech assured me it isn't the case),is this a possibility? Or is it a hard drive and/or MB issue? Hope you guys can help me out, thanks!

Welcome to the forum!
Posting the 7-character model number of the T43 in question would be a good start...
Downloading and burning a PC-Doctor disk and booting from it would be the next step:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Operating system not found; clues in POST beep sequence?

Hello, I have a Pavilion dv9000 (specifically dv9207us), BIOS version F.16, running on Windows Vista. With no apparent cause it now stops booting up with the message "Operating system not found." I can get into the BIOS setup but the "Primary Hard Disk Self Test" option shows "Diagnostics not supported". I've also tried pressing F11 during bootup, as I found information that there could be a recovery function this would trigger, with no result. The hard drive is a Western Digital Scorpio (WD1200BEVS).
I know the immediate answer is that the drive is fried, but of course am trying to make sure before giving up, and one unusual event that takes place on start-up, immediately after pressing the power button, is a series of five double beeps. There's a lower-toned beep followed by a slightly shorter higher-toned one, and that repeats for a total of five -- sounds a little like an English police car, maybe. If you listen very closely, the first, lower-toned beep actually may be two beeps followed by the higher pitched one; "da-da dee". I expect there's information content in that, but have not been able to find any guide to POST beep sequences or the like. Any guidance would be appreciated.
Also, it apparently can access a thumb drive during start-up, as when I attached one I could see the thumb drive LED going active for several seconds, so I'm also wondering if I can load anything into the thumb drive that would help. Naturally, this is the only computer in the house on Vista, however. Thanks.
Message Edited by JimAC on 11-11-2009 02:05 PM

Hello JimAC,
I have now the exactly same issue in my dv9925nr. Did you found a solution?
- Walter

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

HP Pavilion dv6500 Entertainment Notebook PC series Operating system not found

Hello to all how are you doing guys doing today I'm having a problem and need the help from the tech world. So i have a Hp Pavilion dv6500 cto notebook. I started it up and got a black screen stating "Operating System Not Found". I couldnt get into safe mode to recover back to a safe point, i was able to get into the bios system to do a memory and Hard drive test, my memory test came back as a Pass but my Hard drive came back as a fail and stated "Replace Hard Drive".
Now i went out bought a new WD 500GB 5400rpm hard drive for the laptop, i installed it and did a Hard Drive test to make sure it was good and the test came back as a Pass. Now i had this laptop for years since 2007 and it broke just a few months ago, i just got the new hard drive yestarday and was playing doctor last night. When i got the laptop as a gift i was only given a recovery disk which did boot up and gave me the install now option and repair computer option. I chose the install now option and it was starting to install but then got this error message "Windows cannot open the required file D:\Sources\Install.wim. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070002." I read that you cant install windows from a recovery disk so now im back to square one.
So current status is I got a new hard drive that pass the bios test, memory test was a pass. I have no windows disk other then the windows vista recovery disk i tried but failed to install windows. I also tried a windows 7 disk from work but the disk wouldnt boot up came back with a message stating that disk couldnt be read there may be problem with the cd dvd drive or hard drive, but when i put in the windows vista recovery disk that boot up no problem. i just cant install window with it. So Im stuck with a black screen stating no operating system is not found. Note that i havent change the boot up line up back to hard drive to see if it would boot up the new hard drive but i dought it would change anything since its a brand new hard drive with nothing on it.
If someone could help me with step by step like how to get an operating system on my new hard drive. My wife has a laptop but with no cd drive so i would need instruction to boot get it on the usb. Hope i was helpful with my problem.

You have only tried questionable disks. You could order a recovery disk from HP but I am not even sure they still have Vista recovery disks. You could also buy a Windows 7 OEM disk and try that. it will cost you a bit but will be legal. What version of Vista is it? You can also try to find a Vista install disk and use the Key Code on the bottom of the laptop if it is still legible. Here is a link to downloadable .iso files you can use to make a Vista install disk that will activate with your Key Code:
http://downloadsnfix.blogspot.com/2012/08/microsoft-windows-vista-official-iso.html

"Operations Setup" - System not visible

Similar Messages

Maybe you are looking for