"operator changed 11g mode"
We powered down our 4402 controller and moved it to a new UPS. After coming back up, only 24 of our 34 APs are associated. The ones that are not are associating but then being told by the controller to reboot due to "operator changed 11g mode".
<134>wcs01: *Oct 22 09:13:45.375: %LWAPP-6-REBOOT_INFO1: capwap_ac_sm.c:2367 Controller initiated reboot of AP 00:14:a9:6a:b0:60 that has currently joined the controller - (Reason: operator changed 11g mode) 129.2.3.11 22/10 09:13:46.090
Any ideas?
Well, I rebooted the controller again and now everything is working fine.....
Similar Messages
-
Why WLC 5508 shows message " Operator changed to 11g mode" & AP is rebooted
Dear Sir,
I have faced some problem with Cisco 1520 Series APs.
Since few days, We got the log in wlc 5508 like this
"AP 'MAPNSY#WMI3', MAC: ac:a0:16:5c:45:00 disassociated previously due to AP Reset. Uptime: 0 days, 00 h 22 m 52 s . Last reset reason: operator changed 11g mode."
& then AP is rebooted.
Here, I attached the screenshot of WLC 5508 Log.
Plz, help us.Not the IP addr of the management interface.. I am telling about the Dynamic AP manager interface that you have configured which is for the AP to register..
Please post in the output..
show interface summary (mentioning the interface used for APs to join)
Regards
Surendra -
Have Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
HelpHave Operating System 10.6.8, Mail Program 4.6.
How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
Help -
Is there a way to format multiple images at once? Change colour mode or resolution?
Is there a way to format multiple images at once? Change colour mode or resolution?
It's very easy to make an action.
Go to window > actions
In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
Now you can apply the changes you want to make to the images on the file you have opened.
After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
Then you can continue how gener7 explained.
I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know! -
Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.comHello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties. -
Operation ' Change Attribute TSTATE ' could not be carried out for Request
hi,
i am unable to delete the request Id from DSO. and when i checked that, it says request is partially activated(error occured during the activation)
and when i checked the logs i got the following error messages:
Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 361'
i even thought it was BASIS issue but it was not.
due to this error the process chain is failing daily
kindly help
regards
lakshhi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh -
Operation ' Change Attribute TSTATE ' could not be carried out
Hi All,
When I attempt to compress an infocube I get the following error messages:
@5C\QError@ Operation ' Change Attribute TSTATE ' could not be carried out for Request 1114486
@5C\QError@ Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '255'
I checked the request 1114486 in infocube and saw that its status is green however the overall status in the load monitor was "deleted".
How can I fix the problem with this request ?
It is a very old request and it was already uploaded to several other targets.
Thanks in advance..
Bernahi,
It can be due to large data volume which might require more system resources then usual, see if there is any dump related to this in ST22, Also check whether any request is currently running on cubefor data loaded to cubeor getting load to further targets
try compression for less requests say 3 or 4, see if it works or not
hope it helps
regards
laksh -
Is there api function to change access mode and set a passcode to recording in meeting?
Is there api function to change access mode and set a passcode to recording in meeting?
When I'm trying to use "action=acl-field-update&acl-id=SCO_ID_RECORDING&field-id=meeting-passcode&value=MY_PASSC ODE" it just clean the password and do not set it or change.
And "action=permissions-update&acl-id=SCO_ID_RECORDING&principal-id=public-access&permission- id=view-hidden" do not work too.There is not a specific API for doing this. This was discussed in the other Connect forum here, Adobe Connect User Community.
For you call I would make the second part differently. Instead of 'field-id=meeting-passcode&value=MY_PASSCODE' I would call 'meeting-passcode=MY_PASSCODE' and see if that worked better. -
Are we change nonarchive mode to archive mode using rman in enterprislinux
how can i change nonarchive mode to archive mode using Recovery manager in enterprise linux
Did you read the other post where you asked this same question: {message:id=3868427}
-
Why does my IN operator change the datatype
Hi
This doesn't make any sense, but i'm hoping there's an obvious answer which you guys have seen a million times before.
I have this criteria in my WHERE clause
AND rpg_id = (SELECT rpg_id
FROM integration.rep_elig_groups
WHERE pel_id IN(34))because of this clause no results are return in my query. However if i use a to_number function like this:
AND rpg_id = to_number(SELECT rpg_id
FROM integration.rep_elig_groups
WHERE pel_id IN(34))OR
AND to_char(rpg_id) = (SELECT rpg_id
FROM integration.rep_elig_groups
WHERE pel_id IN(34))i get the expected results returned.
The sub query:-
SELECT rpg_id
FROM integration.rep_elig_groups
WHERE pel_id IN(34)returns the value 226. rpg_id in this table is a NUMBER datatype. As is rpg_id in the original outer query.
I looked at synonyms, views, and other objects it might be using for the rep_elig_groups table, but there are none.
Then i tried changing the IN operator for an EQUALS operator and would you believe it, it worked.
AND rpg_id = (SELECT rpg_id
FROM integration.rep_elig_groups
WHERE pel_id IN(34))can someone please explain what ORACLE is thinking here!!!
Many thanks
Edited by: tri_harder on Dec 9, 2008 4:48 PM missed the closing bracket in the final piece of code!
Edited by: tri_harder on Dec 10, 2008 8:44 AMI ran the expain plans in TOAD for both queries, with the only difference changing the operator from IN to =. I'm very surprised there is such a difference between the two!!
SELECT tim_id,
rpg_id,
ROUND(SUM(retail_value), 2) retail_value,
ROUND(SUM(salesidx), 2) salesidx,
ROUND(SUM(VALUE), 2) VALUE,
ROUND(SUM(bva_salesidx), 2) bva_salesidx,
ROUND(SUM(bva_value), 2) bva_value,
ROUND(SUM(bva_retail_value), 2) bva_retail_value
FROM ms_stats_ol_ms
WHERE 1 = 1
AND fmt_id IN(SELECT ID
FROM formats
WHERE car_id = 0 OR 0 = 0)
AND fmt_id NOT IN(
SELECT fmt.ID
FROM formats fmt,
class_formats clf
WHERE fmt.ID = clf.fmt_id
AND clf.cla_id IN(3, 6)
AND fmt.car_id = 2)
AND cla_id = 3
AND rpg_id = (SELECT rpg_id
FROM rep_elig_groups
WHERE pel_id IN(34))
AND tim_id BETWEEN 4985 AND 5418
GROUP BY tim_id, rpg_idSo this is my original query that returned no results and produced the following Explain Plan:-
Plan
SELECT STATEMENT ALL_ROWSCost: 10,842 Bytes: 1,505 Cardinality: 35
17 HASH GROUP BY Cost: 10,842 Bytes: 1,505 Cardinality: 35
16 HASH JOIN Cost: 10,836 Bytes: 1,587,345 Cardinality: 36,915
1 TABLE ACCESS FULL TABLE INTEGRATION.FORMATS Cost: 2 Bytes: 90 Cardinality: 15
15 HASH JOIN RIGHT ANTI Cost: 10,833 Bytes: 1,456,912 Cardinality: 39,376
6 VIEW VIEW SYS.VW_NSO_1 Cost: 4 Bytes: 6 Cardinality: 2
5 HASH JOIN Cost: 4 Bytes: 24 Cardinality: 2
2 TABLE ACCESS FULL TABLE INTEGRATION.FORMATS Cost: 2 Bytes: 12 Cardinality: 2
4 INLIST ITERATOR
3 INDEX RANGE SCAN INDEX (UNIQUE) INTEGRATION.CLF_PK Cost: 1 Bytes: 60 Cardinality: 10
14 TABLE ACCESS BY INDEX ROWID TABLE CHARTDEV.MS_STATS_OL_MS Cost: 10,829 Bytes: 1,530,034 Cardinality: 45,001
13 BITMAP CONVERSION TO ROWIDS
12 BITMAP AND
8 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) CHARTDEV.MSST_OL_MS_RPG_ID_I
7 INDEX FAST FULL SCAN INDEX (UNIQUE) INTEGRATION.REG_PK Cost: 2 Bytes: 6 Cardinality: 1
10 BITMAP MERGE
9 BITMAP INDEX RANGE SCAN INDEX (BITMAP) CHARTDEV.MSST_OL_MS_TIM_ID_I
11 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) CHARTDEV.MSST_OL_MS_CLA_ID_I The following script has the very small change of the operator changed from IN to =
SELECT tim_id,
rpg_id,
ROUND(SUM(retail_value), 2) retail_value,
ROUND(SUM(salesidx), 2) salesidx,
ROUND(SUM(VALUE), 2) VALUE,
ROUND(SUM(bva_salesidx), 2) bva_salesidx,
ROUND(SUM(bva_value), 2) bva_value,
ROUND(SUM(bva_retail_value), 2) bva_retail_value
FROM ms_stats_ol_ms
WHERE 1 = 1
AND fmt_id IN(SELECT ID
FROM formats
WHERE car_id = 0 OR 0 = 0)
AND fmt_id NOT IN(
SELECT fmt.ID
FROM formats fmt,
class_formats clf
WHERE fmt.ID = clf.fmt_id
AND clf.cla_id IN(3, 6)
AND fmt.car_id = 2)
AND cla_id = 3
AND rpg_id IN (SELECT rpg_id
FROM rep_elig_groups
WHERE pel_id IN(34))
AND tim_id BETWEEN 4985 AND 5418
GROUP BY tim_id, rpg_idAnd this returned the expected results and produced the following Explain plan:-
Plan
SELECT STATEMENT ALL_ROWSCost: 10,996 Bytes: 1,610 Cardinality: 35
30 TEMP TABLE TRANSFORMATION
10 LOAD AS SELECT SYS.SYS_TEMP_0FD9D6614_166B4444
9 MERGE JOIN CARTESIAN Cost: 6 Bytes: 570 Cardinality: 30
5 VIEW VIEW SYS.VW_NSO_1 Cost: 4 Bytes: 26 Cardinality: 2
4 HASH JOIN Cost: 4 Bytes: 24 Cardinality: 2
1 TABLE ACCESS FULL TABLE INTEGRATION.FORMATS Cost: 2 Bytes: 12 Cardinality: 2
3 INLIST ITERATOR
2 INDEX RANGE SCAN INDEX (UNIQUE) INTEGRATION.CLF_PK Cost: 1 Bytes: 60 Cardinality: 10
8 BUFFER SORT Cost: 6 Bytes: 90 Cardinality: 15
7 TABLE ACCESS BY INDEX ROWID TABLE INTEGRATION.FORMATS Cost: 1 Bytes: 90 Cardinality: 15
6 INDEX UNIQUE SCAN INDEX (UNIQUE) INTEGRATION.FMT_PK Cost: 0 Cardinality: 1
29 HASH GROUP BY Cost: 10,990 Bytes: 1,610 Cardinality: 35
28 HASH JOIN Cost: 10,989 Bytes: 4,600 Cardinality: 100
11 TABLE ACCESS FULL TABLE (TEMP) SYS.SYS_TEMP_0FD9D6614_166B4444 Cost: 2 Bytes: 180 Cardinality: 30
27 HASH JOIN RIGHT SEMI Cost: 10,987 Bytes: 34,280 Cardinality: 857
12 INDEX FAST FULL SCAN INDEX (UNIQUE) INTEGRATION.REG_PK Cost: 2 Bytes: 6 Cardinality: 1
26 TABLE ACCESS BY INDEX ROWID TABLE CHARTDEV.MS_STATS_OL_MS Cost: 10,984 Bytes: 1,310,574 Cardinality: 38,546
25 BITMAP CONVERSION TO ROWIDS
24 BITMAP AND
16 BITMAP MERGE
15 BITMAP KEY ITERATION
13 INDEX FAST FULL SCAN INDEX (UNIQUE) INTEGRATION.REG_PK Cost: 2 Bytes: 6 Cardinality: 1
14 BITMAP INDEX RANGE SCAN INDEX (BITMAP) CHARTDEV.MSST_OL_MS_RPG_ID_I
18 BITMAP MERGE
17 BITMAP INDEX RANGE SCAN INDEX (BITMAP) CHARTDEV.MSST_OL_MS_TIM_ID_I
22 BITMAP MERGE
21 BITMAP KEY ITERATION
19 TABLE ACCESS FULL TABLE (TEMP) SYS.SYS_TEMP_0FD9D6614_166B4444 Cost: 2 Bytes: 13 Cardinality: 1
20 BITMAP INDEX RANGE SCAN INDEX (BITMAP) CHARTDEV.MSST_OL_MS_FMT_ID_I
23 BITMAP INDEX SINGLE VALUE INDEX (BITMAP) CHARTDEV.MSST_OL_MS_CLA_ID_I Can anybody suggest what's going on?? Why do i get results with one and not the other!!
Edited by: tri_harder on Dec 10, 2008 10:00 AM
altered the first query to change the IN operator to = -
This issue comes up randomly and I can't really troubleshoot it enough to find a pattern.
When I open a document and hit "f" to change screen modes, sometimes the nextscreen mode (not full screen - it's the one where your canvas extends to the full dimensions of the application window) doesn't dipsplay the menus at the top (nor any panels for that matter) here is a screen shot of the first screen mode (default)
then when I press "f" the first time, I sometimes get this
the next screen mode appears to be as it should, but I can't figure out whether this could be a graphics driver issue, a preferences issue (that needs to be reset), a problem internally (Photoshop versus RAM), etc. This seems to happen when I'm working on large file sizes (100MB+), but like I said - it's all a little random. In the past I've reset preferences, made sure my graphics drivers were updated - all that I know to try.
What else could be the problem? Rebooting Photoshop fixes it 20% of the time (or less), sometimes I can "log off" and that fixes it, but mainly I have to reboot.Bottom line is this: It is WAY too complicated a problem to answer simply. It's a lot like "Ford" vs. "Chevy".
Generally speaking, I'm seeing fewer bad reports from ATI users, but that doesn't mean individual cards are all better.
People on this forum report, for example, that they sometimes cannot get Photoshop's OpenGL to work with an ATI 5670, and that the expensive nVidia Quadro cards are causing more problems with Photoshop than the reasonably priced "gamer" models.
Right now, today, considering the last year's worth of experience, it appears that ATI is releasing better drivers, particularly for several year old models, than nVidia is. Will that keep up? Who can say.
Might be a good idea to pick a specific model you like then just ask whether folks are already using it with good results.
FYI, in the grand scheme of things Photoshop doesn't demand all that much from the video card, so even inexpensive cards CAN work well with it. Whether they actually DO on any given day with any given model, well, that's what's hard to nail down.
-Noel -
Interlocked operations in user-mode
Hi, I understand there isn't a interface for interlocked operations in user-mode.
I would appreciate any help on how to write an implementation by myself. This help should
also include how to compile assembler files in SOLARIS , or how to inline assembler in the
C sources themself.
Note that the compiler is GCC
Thanks!!!>
I'm not sure I agree with this - the canonical example
of where atomic integer operations provide the "one
true way" is reference counting. I tend to agree with you here - indeed, for high-granularity objects even 8-byte light-weight mutex would be a significant penalty, and reference counting is indeed the natural place for interlocked
arithmetics. The point is, you probably do not want to have reference counting for small objects -
these days it might be cheaper to create multiple copies. Anyway, this has to do with design,
and good design should address the issue.
>
Similar discussions have been taking place in other
threads on other forums. The general feeling seems to
be suprise that interlocked integer operations are not
part of the solaris ABI, though the existence of
<sys/atomic.h> shows that they are part of the kernel.
While we are at it, even the membar APIs in
<sys/atomic.h> have use in user mode application code
- esp. w.r.t the double-checked locking idiom when
implemented on a multi-processor machine. It is
impossible, even with volatile, to ensure that double
checked locking will work on an SMP machine without
inserting memory barriers. Furthermore, even if it is
true that 99.9% of the cases are handled with the
existing threads library, that is not a sufficient
reason to exclude a well known and widely used
synchronization primitive from user mode. It is clear
that users of solaris, both on sparc and intel, want a
standardized user-mode atomic integer operations API.
Perhaps just a user level implementation of
<sys/atomic.h> would do.Once again, I would probably agree with the argument - provided, we are talking about single
platform implementation. Unfortunately enough, interlocked operations aren't part of any standard,
so there is no way to create any platform-independent solution (unless one wants to use
concurrency-supportive languages like Ada 95).
I'd vote for inclusion of interlocked primitives into POSIX standard - then it will become mandatory
for the platform vendors... I doubt, however, whether Micro$oft would support this gracefully - so
far they have screwed up everything they've ever touched... :( -
Change working mode on X-Fi Titanium Fatality cause system freeze
Hi.
Using X-Fi Titanium Fatality soundcard and latest beta driver. But then I need change working mode (from Game to Audio Creation or Audio Creation to Game) it's cause system freeze. And only hard reset helps. No errors message or error logs in system.
This problem appear only if I played any games in Game mode and after want listen music in Audio mode. If don't play any games or listen music, you can change modes multiple times without problem.
I try clean Windows 7 installation and problem is still here.
Attached log information from Creative System Information.
My computer configuration - http://systemprofile.net/p/1/Kuja
Attached Files
CTSi.zip
(18.4 KB, 0 views)Sorry but support doesn't monitor these discussion boards. Please use this email form to contact them.
-
Any function module to change the mode in Planning board
Hi guys,
Is there any function module to change the mode in Planning board?
I would like to call a custom screen to to chagne the mode since the strandard function cannot show enough info.
Thanks.Thanks Bhanu for ur quick reply.
Is that enough to change the technical name in the table RSZCOMPDIR.
Let me give some more information, idea is to change the technical name of all the queries present in a system based on a new naming conventions.
Eg.
Change all the technical name of queries ZQSAP to ZQXYZ.
If there is function module which allows to change the technical name of the queries that not only updates the table RSZCOMPDIR but also all the interlinked tables. -
Gnome battery icon and 'Could not change DPMS mode'
Hello,
I run my Arch with latest Gnome (3.2.1) and lately, my battery icon disappeared. Then, after some reboot it showed again (without changes to configuration, packages etc), and now its gone again, for good it seems.
My .xsession-errors output is:
/etc/gdm/Xsession: Beginning session setup...
localuser:ironhalik being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
(gnome-settings-daemon:1442): power-plugin-WARNING **: Unable to start power manager: Could not change DPMS mode
** Message: a new manager occured at org.globalmenu.manager, :1.2
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-miner-fs.log'
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-store.log'
(tracker-store:1541): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
** Message: a new manager occured at org.globalmenu.manager, :1.2
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: a new manager occured at org.globalmenu.manager, :1.2
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:310: Setting primary store IDs to defaults.
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:338: Primary store IDs are 'eds' and 'system'.
JS LOG: GNOME Shell started at Mon Jan 23 2012 02:16:40 GMT+0100 (CET)
Window manager warning: Log level 32: a new manager occured at org.globalmenu.manager, :1.2
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: applet now embedded in the notification area
(tracker-miner-fs:1513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** Message: a new manager occured at org.globalmenu.manager, :1.2
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1696): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /open=false
refresh /0/open=false
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /1/open=true
path = /1, item is 0x963ed60
refresh /3/open=true
path = /3, item is 0x963f100
refresh /open=false
refresh /3/open=false
(gnome-shell:1497): St-CRITICAL **: setup_framebuffers: assertion `width > 0' failed
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1716): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x9343c18
refresh /open=false
refresh /0/open=false
Any ideas?
ThanksOk, I reinstalled gdm, added my user to the video group and so far it seems to be working properly, so thank you very much.
Now I just need to see if it will stick that way, since it seems to come and go somewhat randomly.
And btw, I use the presentation mode shell extension, but disabling it did not have any effect.
EDIT:
Ok, it seems the source of the problem was this little addon to /etc/gdm/Init/Default, that I used to launch synergy in GDM:
/usr/bin/killall synergyc
while [ $(pgrep -x synergyc) ]; do sleep 0.1; done
/usr/bin/synergyc 192.168.0.2
Since synergy controls the display power state, it would add up.
Last edited by ironhalik (2012-01-23 19:09:43)
Maybe you are looking for
-
Firefox versus Safari? And how do I uninstall Firefox?
I've always only used Safari. Firefox has been recommended to me in case I have to reinstall OS X while on the road and unable to update beyond the 10.4.6 of my retail OS X install disk. See: http://discussions.apple.com/thread.jspa?threadID=1897928&
-
How we use group by function while inserting data through datablock
Hi All i have datablock in tabulor form i want when i insert data (commit) then data will insert in group by example my table is like that desc table dress_name color qty and i am inserting data into it like this dress_name color
-
Sync playback across machines via network?
F or a multichannel projection, we are searching for a way to have upto 10 files (on separate machines - or more ideally on say half the number of machines using diff DVI outs) start at the same time, play and resync at start, repeating. does anyone
-
Upgrade on SAP Plant Maintenance and Product Data Management
Hi Gurus, I assigned to a upgrade project for Plant Maintenance and Product Data Managemet modules. Please guide me what are the steps to follow and provide more information on this ... Thanks in advance!!!!!!!!! Regds, RK
-
win2000+tomcat 5.0.19; after installed tomcat i use the follow application to test it. import java.io.*; import javax.servlet.*; import javax.servlet.http.*; public class HelloWorld extends HttpServlet public void doGet(HttpServletRequestrequ