Operator Dial out from CWMS
I was wondering if CWMS has the operator dialout capabilities like MeetingPlace. If a user dials into CWMS can they press a key on their phone to get an CWMS operator? In MeetingPlace we use #0 for this feature. I have not seen anything in CWMS that either this is supported or not.
Thanks
John
Hi John,
In CWMS, there are currently no TUI features that can allow for this to occur. Overall, there are no menu options except for the joining of scheduled meetings or PCN meetings (coming in 1.5).
Thanks,
Derek Johnson
Conferencing TAC
Similar Messages
-
ORA-12535 TNS:operation timed out from SQLPlus and Enterprise Manager Conso
I keep getting a ORA-12535 TNS:operation timed out error, when I try to start my Database.
I know its a timeout error, but I would like to know what is timing out and why. All I want is the database its self to run to allow me to connect to it via SQLPlus and JDBC.
Is there any information on what the following services do and which ones I need to have running to use the database.
Oracle OLAP 9.0.101
Oracle OLAP Agent
Oracle oraHome90Agent
Oracle oraHome90ClientCache
Oracle OraHome90PagingServer
OracleOra90SNMPPeerEncapsulator
OracleOra90SNMPPeerMasterAgent
OracleOra90STNSListener
Thanks for any help TonyEither reconfigure CONNECT_TIMEOUT to be 0, which means wait indefinitely, or reconfigure CONNECT_TIMEOUT to be some higher value. Or, if the timeout is unacceptably long, turn on tracing for further information.
If you have oracle metalink, then read the following note;
Note:119706.1 - Troubleshooting Guide TNS-12535 & ORA-12535 Errors -
Unified Comm - dial out from either missed calls or received calls
We have Unified Communications 8.0. Is there a way to have it automatically dial 9 when hitting under the directory - auto dialing a missed or received call. We would also like the caller ID on the phones to correctly display the incoming phone number, i.e. not showing the "9" at the beiginning of each incoming phone number.
One option that I have experimented with, although I haven't put it in production, is prepending a pound sign to the incoming CallerID. Because it is not a number, it is easy to interpret the digits correctly. You just need to setup route plans that allow # as a PSTN access digit. This will work with any version of CUCM, I beleive. I don't know if there is a specific solution for this in CUCM 8.0.
-
When dialing out I sent the same cid from the two different lines on PAP2
Hello, I'm using a PAP2 adapter on my phone system. When I dial out from line 1 I sent the phone number or callerd ID from line one. When I dial out from line two which is a different number, I'm still sending out the same phone number as that of line one yet, when I call in to each indivial number, line 1as well as line 2 they each ring serparetly and individualy. I wonder if I have missed a step in the setup. Anyone nows how to fix this or where I can get the info needed.
Thank you.I don't believe that there is any network address binding. The UDP Open VI determines which network card you are using and the UDP read function determines which IP address you pull the data from. Since you are specifying all of the parameters, it should not carry over after you close a session. There may be a wait required for the connections to reset. Are you doing this programmatically, or are you stopping and restarting your VI? Can you send a screen shot of both of your UDP connections on your block diagram?
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments -
GE Standalone Skype Phone dialing out issue
I have the one year subscription activitated which includes LAN lines and mobile dialing. I can receive calls to the phone just fine. I cannot make any outbound calls. Any ideas?
Thanks in advanceUpdate: I can dial out from my PC using my subscription so the subscription isn't the problem.
-
Hi - This is my second Skype phone. I first go the RTX 3088 and had to reboot the base every couple of days. I then bit the bullet and purchased the GE 31591 and set up was a breeze, the only problem I encountered was that I did learn to dial out I needed to dial 1-areacode - xxx-xxxx but I could live with dialing the extra 1. All was good for about 2 weeks and then out of the blue I tried calling my own cell number to look for my phone and noticed that it would not dial out. I can hear the phone dialing out and then it goes silent and my cell phone does not ring.(nor any othe phones that I dial) The GE 31591 recieves calls fine. I purchase a skype number so that I could get rid of my landline. I can dial out from my PC when I login to this same Skype account. I tried rebooting the base station but nothing works. This has been like this for a couple of weeks. I have invested alot of money and time into Skype and really do not want to go back to a landline.
Hi - I fixed this - It appears that a firmware update changed my Preferred line setting.
-
Unity Connection 8.6 not able to forward from extension (dial out)
Dear all,
I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
Basically here is the request for which I'm having an issue:
- I'm making a menu with a number XXX (CTI Port) with a System Call Handler
- Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
- All the CTI Ports are forwarded to international numbers which are the final destination
So the flow is the following:
NOT Working
- XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
Working
- XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
If anyone have a clue about what I can do, I'll appreciate a lot ...
Thanks in advance
C.Hi Taranjit,
The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
Kind regards
Christophe -
TNS:Operation Timed Out error while trying to invoke BPEL Process from sql
Hi,
I am trying to invoke a BPEL Process from PL/sql code. When i try to invoke the process, I am getting the following error message
ORA-29273 HTTP Request Failed
ORA:06512: at SYS.UTH_HTTP at line 1029
ORA:12535: TNS:Operation Timed Out
ORA:06512: at line 18
I have the SOA suite installed on my local machine...and the BPEL process that i am trying to invoke is deployed their.
Any idea what could be wrong..following is the code piece
soap_request:='<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header/>
<soap:Body xmlns:ns1="http://xmlns.oracle.com/Test">
<ns1:TesProcessRequest><ns1:input>is1_1land</ns1:input></ns1:TesProcessRequest>
</soap:Body>
</soap:Envelope>';
dbms_output.put_line('soap_request: '||soap_request);
utl_http.set_proxy('3.209.30.25:80', '3.209.32.149:8888');
http_req:= utl_http.begin_request('http://3.209.32.149:8888/orabpel/default/Tes/1.0 '
,'POST'
,'HTTP/1.1');
dbms_output.put_line('after Begin Request' );
utl_http.set_header(http_req, 'Content-Type', 'text/xml') ;
Please adviseyou are right the file adapter doesnt invoke any bpel
process, instead it is polling the file from
directory location?If it is polling for new files, shouldn't it create a new instance of the BPEL process automatically the moment it finds a new file? In other words, should a new file trigger an instance of the BPEL process rather than being started from PL/SQL?
Can this file adapter not be invoked as bpel process
in that case?The file adapter is part of a BPEL process. The BPEL process can be invoked from e.g. PL/SQL.
In this case this file adapeter return to an RECEIVE
activity...I think this receive cannot be invoked as
a BPEL process rite?Can you explain what you mean with this?
Also , will all synchronous request return "TIMEOUT"
error, if tried to invoke from pl/sql?Only if the synchronous process instance takes more time to complete (and thus to return) than the value specified for a time-out to occur. If the instance completes in for example 10 ms and the time-out time is specified as 30 seconds, no time-out will occur.
Regards, Ronald -
Hi, I have been trying for push Notification Services in Windows 8 Store Apps. I am requesting For notification channel in the following manner
publicasyncvoidregisterChannelForNotification(
try
TileUpdateManager.CreateTileUpdaterForApplication().Clear();
BadgeUpdateManager.CreateBadgeUpdaterForApplication().Clear();
varvProfile =
NetworkInformation.GetInternetConnectionProfile();
if(vProfile.GetNetworkConnectivityLevel()
== NetworkConnectivityLevel.InternetAccess)
varvChannel =
awaitPushNotificationChannelManager.CreatePushNotificationChannelForApplicationAsync();
varvBuffer =
CryptographicBuffer.ConvertStringToBinary(vChannel.Uri,
BinaryStringEncoding.Utf8);
varvUri =
CryptographicBuffer.EncodeToBase64String(vBuffer);
varvClient =
newHttpClient();
try
varvResponse =
awaitvClient.GetAsync(newUri(Constants.SERVER_URL));
if(vResponse.IsSuccessStatusCode)
sendDeviceTokenRequest(vChannel.Uri);
catch(HttpRequestException)
catch(Exceptionex)
This gives me the exception,The wait operation timed out. (Exception from HRESULT: 0x80070102) when requesting for pushNotification channel. What could be the possible reason and how to solve this issue
Nikhil Sharma10Hi,
I have currently the same problem with requesting a push channel.
But iam not sure if it is a problem with my phone, or my application.
I cant get rid of this error. The solution says: "retry the channel request later". But it doesn
matter if I retry the channel request later (triggerd by pressing a button) the same day or the next day.
I resetted my windows phone, installed the newest dev preview, but it is still not working. But the same code worked a few months ago. On the same phone.
Thats why Iam not sure what I changed (accidentally) in my app code which causes now the 0x80070102 error.
Any ideas why the same code is not working any more?
Thanks
Greetings from Germany
Simon -
I have been struggeling for days to update my Iphone software to V5.1. On my desktop PC with uninterrupted ADSL I received a message "error in connection" and operation tmed out" I have used my laptop (with no previous Itunes programs) installed Itunes and connected my Iphone 4S. I constantly receive the same message?
if you have ios 5.0 on your device you can update it directly from the iphone.
go to settings / softwareupdate.
do a backup on your iphone first. -
How to get the hours(afru-iedz) clocked out from the last operation (vornr)
Hi,
I need to show the time (AFRU-IEDZ) clocked out from last operation (VORNR). Can any one help me with this.What do you need to show it in?
Paramter: l_vornr type afru-vornr.
data:
l_time type afru-iedz
Select IEDZ
into l_time
where VORNR = l_vornr.
Write:/ l_time. -
Hi all,
Asking two questions here.
Firstly, I'm currently running on demo licences. I have the correct PAK to register but it seems that the only option is to put the licences on the ELM that runs on the webex server itself. Can I put the webex licences on the existing ELM I have for Call Manager so all my UC licences are in the same place.
Secondy, on dial-out I am selecting UK and putting in my number of 01234567890 (for example). What format does this hit my CUCM in? I need to make sure that CUCM routes the call as 9 01234567890. In order to manipluate can this be an application dial rule or do I need to put a translation pattern in whatever my inbound CSS for the Webex SIP trunk?
Thanks in advance for your assistance!
JonHello Jon,
Let me try answering your questions:
1. You have to use ELM that is hosted on CWMS server
2. As for dial out, format is in +XXXYYZZZZZZZ (where XXX is a country code, YY is an area code, and ZZZZZZZ is a telephone number). For UK and your example, it would be +4401234567890.
If you choose an option to "Call me at an internal number", then CWMS will send only what you entered as a phone number (used mostly for local extension numbers).
I hope this helps.
-Dejan -
I have a web app that is backed by a an Azure SQL Database. The problem is that I had multiple issues when connecting to the database mainly when trying to establish a connection, or timeouts. This is the log I just encountered when trying to use the web
app.
[Win32Exception (0x80004005): The wait operation timed out]
[SqlException (0x80131904): Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=21970; handshake=1; ]
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +671
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +116
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1012
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +6712291
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +152
System.Data.SqlClient.SqlConnection.Open() +229
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +102Hi Affar2k,
According to your description, we need to verify if there is no network issue and the Sqlclient version is older than .NET 4.5. You can try to connect to the Windows Azure SQL database via SSMS and check if it can run well. When you
connect to the SQL Azure database via ADO.NET, you need to verify that the server name and passwords are right in the connection string.
For more information, you can review the following article about how to connect to Windows Azure SQL Database using ADO.NET.
http://msdn.microsoft.com/en-us/library/windowsazure/ee336243.aspx
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Azure - Intermittent The wait operation timed out
I have a website engine which runs a few hundred "white label" sites. It's hosted on Azure with a SQL Azure Business database. Generally everything is fine - it all works and runs at a good speed.
However, throughout the day I get maybe 40 or 50 of the error:
System.ComponentModel.Win32Exception: The wait operation timed out
Please don't refer me to the connectivity blog at http://blogs.msdn.com/b/sqlazure/archive/2010/03/22/9982979.aspx as this seems to refer to problems where you just can't connect. My problem is that it's fine most of the time, but I still get these
intermittently.
This is sometimes on the main database, but we're also using a database for sessions and this gets the errors too. Both databases are on the same server.
I also get errors like:
An existing connection was forcibly closed by the remote host
and:
System.Data.SqlClient.SqlException: The service has encountered an error processing your request. Please try again. Error code 40143. A severe error occurred on the current command. The results, if any, should be discarded.
and, when evil bots are hammering the site:
System.Data.SqlClient.SqlException: Resource ID : 1. The request limit for the database is 180 and has been reached. See 'http://go.microsoft.com/fwlink/?LinkId=267637' for assistance.
Each website can potentially have a Google footprint of around 10,000 pages. The result it that bots are hitting the sites regularly, indexing lots of pages for hundreds of sites. I also have some worker roles doing data work. The database is clearly busy!
I am hoping to add 2 or 3 times the number of sites that I currently have to the "engine".
I am looking at efficiency where possible, but the sites are clearly under a fair load from bots and visitors.
My question is, will one of the upgrades from Business to S2, P1, P2 or P3 resolve these problems? The financial cost of these database instances stagger greatly so I wouldn't want to update and find I'm left with the same problems but am paying many times
more each month.
Thank you in advance.Hello,
For Web/Business edition database, the maximum limit of concurrent requests is 180. Beyond this limit, you will receive error.
The Max woker threads for Standard(S2) is 100, you should upgrade your database to Permium tier.
The concurrent requests limit of premium database varies depending on the reservation size of a premium database. For example, for P1, the max worker threads is 200.
Reference:Azure SQL Database Resource Governance
Azure SQL Database Service Tiers and Performance Levels
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
[email protected]
<blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
== Firefox version
==
2.0.0.4
== Operating system
==
PPC Mac OS X Mach-O
== User Agent
==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
== Plugins installed
==
*-Netscape Navigator Default Plug-in
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
*Plugin that plays RealMedia content
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 9.0 r260
*Provides support for Digital Rights Management
*Provides support for Windows Media.
*Java 1.3.1 Plug-in (CFM)
*Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
*Java 1.3.1 Plug-inHello.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
Maybe you are looking for
-
Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors: Event ID 5003: Unable to initialize the Microsoft Exchange Information Store service
-
Anyone had this problem syncing iPhone 5 with iTunes on macbook pro?
-
Photoshop Album 1.0 - Arbeitsbereich
Im Photoshop Album ist mein Arbeitsbereich durcheinandergekommen - der Papierkorb um alle Elemente zu löschen funktioniert nicht - statt dessen kommt die Fehlermeldung ´ungültiger Cursorzustand´. Ich muss immer die Fotos einzeln aus dem Bereich rausz
-
CS6 Anzeigetreiber musste nach einem Fehler wiederhergestellt werden
Hallo, seit einiger Zeit kann ich PS Dateien nicht mehr über den normalen Ordner öffnen, weil sich Photoshop dann direkt aufhängt und ich es (über den Task-Manager) schließen muss. Ich kann die Dateien jedoch über die Bridge problemlos öffnen. Ich ha
-
Plx help on Spatial data urgent.....
I am doing a project that retrieve the data stored inside oracle 10g database using j2ee and jdeveloper...currently i am able to retrieve the data type String int etc...using the recordset and display it out...but how do i work wif the sdo_geometry o