Opersting System

Hello I have windows& Home Basic as my original OS. i need to format my laptop but dont have the OS. Please help me with a backup copy of the OS>

Hi,
There are two options available.
1. You can order a replacement set of Recovery Discs using the link below - these will reinstall the operating system, all required drivers and nearly all of the original software ( the exception often being trials of MS Office ). They will also re-create all the original partitions, including the Recovery Partition.
Order HP Recovery Discs.
2. You can use the following method to create your own Windows 7 Home Basic 64bit installation disc.
Before trying the following, make sure you can still read the entire 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC. However, there is no download directly available for Windows 7 Home Basic, so you'll need to download another version ( any one will do, but the link below is for Windows 7 Home Premium 64bit - the source is Digital River ).
Windows-7 Home Premium SP1 64-bit
For the key on your COA label to work, you will now need to use the method described in the following link to convert this ISO to an all-version installer.
http://www.sevenforums.com/tutorials/85813-windows-7-universal-installation-disc-create.html
Once done, use an application such as ImgBurn ( Note: You may want to de-select the additional software offerings during the installation of ImgBurn ) to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Additional drivers and software you may need for your notebook can be found by entering your Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Set Preferences for all users

I need to be able to set QT preferences that are persistent to all users of a particular computer.
For example, I need to set the video to Safe Mode, but that setting only gets saved to the currently logged in user. Safe Mode would not be enabled for a user logging in with a different account.
This is on a Windows XP SP3 machine with the latest version of QT.

C:\Program Files\QuickTime\QTSystem\QuickTime cpl is the file for the QT control panel.
With XP pro open the Folder Options control panel and click on the View tab. Uncheck> Use simple file sharing [Recommended] this will give the computer a Security tab. While in Folder Options you probably should put a check\dot in> Show hidden files and folders, and uncheck> Hide extensions for known file types and maybe uncheck> Hide protected opersting system file Recommended, to be sure QuickTime cpl shows up.
Right click on QuickTime cpl and click on the Security tab. This should give you the ability to work with permissions for user accounts

NW2004s Sneak Preview - Unable to logon using BEx Analyzer or WAD

We have installed SAPNW2004s Sneak Preview Full ABAP Edition (with Web Dynpro for ABAP!) with the GUI recommneded on SDN download page.
SAP Frontend Package 6.40 Final Compilation 3
=============================================
SAP Frontend Package 6.40 Final Compilation 3 for Win32
Product Version   Release State    Patchlevel
GUI      6.40      Final           8
SCM      4.0        Final           1
BW       3.5       Final           3
KW       7.0       Final              0
I can log on to Client 001 and access BI, but on trying to access using the BEx Analyzer and Web Application Designer, I get a error message saying the "User or password is not correct (Repeat Logon).
I have already provided all relevant authorization to the user I am using to logon to BEx. My Opersting system is Windows XP Professional SP1
However, if I use the RRMX transaction (using the old GUI)
SAP Frontend Package 6.20 Final Compilation 4
=============================================
SAP Frontend Package 6.20 Final Compilation 4 for Win32
Product Version   Release State    Patchlevel
GUI      6.20      Final          32
APO      3.0A      Final          19
BW       3.0B      Final           7
KW       5.2       Final              4
SEM      3.5       Final              0
I can log onto BEx anlyzer. Your help in resolving the problem would be highly appreciated.

Roger,
When installating the Comp 4 GUI make sure you have selected the BI 7.00 Add-on. There you will also find BW 3.5. For the time being just select BI 7.00 Add-on. The Patch will only update the files if they are already exisiting (installed).
Only ensure that the user has following roles assigned:
SAP_BW_ALL
SAP_BW_ANZEIGER
SAP_BW_AWTEST
SAP_BW_DEVELOPER
SAP_BW_SEM_BPS_APPLICATIONS
SAP_BW_SEM_LP
and Profiles:
SAP_ALL
SAP_NEW
S_A.SYSTEM
S_RS_ALL
RS_RS_EXPL_A
Plus a Z_BI_ROLE (having ALL authroization for below objects)
Z_BI_ALL                            All BI Authorizations
5       Manually   Cross-application Authorization Objects                      AAAB
        4          Manually   Authorization Check for RFC Access                           S_RFC
                                                              5       Manually   Basis - Development Environment                              BC_C
4          Manually   ABAP Workbench                                               S_DEVELOP
                                                              5       Manually   Business Information Warehouse                               RS
        4          Manually   Infrastructure of the Analysis Authorizations                S_RSEC
        4          Manually   Data Warehousing Workbench - Objects                         S_RS_ADMWB
        4          Manually   BI Analysis Authorizations in Role                           S_RS_AUTH
        4          Manually   Business Explorer - BEx Web Templates (NW 7.0+)              S_RS_BTMP
        4          Manually   Data Warehousing Workbench - InfoSource (Flexible Update)    S_RS_ISOUR
        4          Manually   Data Warehousing Workbench - Open Hub Destination            S_RS_OHDST
        4          Manually   Data Warehousing Workbench - Process Chains                  S_RS_PC
        4          Manually   Business Explorer - Individual Tools                         S_RS_TOOLS

Trying to open RAW (NEF) in CS2

Every time I try to open RAW photos in CS2 I get the error message "could not complete your request because the file-format cannot parse the file". What do I do?

I'm using Microsoft Vista and I have a Nikon D40x
Date: Tue, 26 Mar 2013 19:02:43 -0700
From: [email protected]
To: [email protected]
Subject: Trying to open RAW (NEF) in CS2
    Re: Trying to open RAW (NEF) in CS2
    created by R_Kelly in Photoshop for Beginners - View the full discussion
Hi, What opersting system are you using? What camera did the camera raw files come from?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5182160#5182160
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5182160#5182160
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5182160#5182160. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Xmonad: startup programs and keybindings

hi!
i'm using xmonad since 2 weeks and so far i'm really satisfied with it. but i have 2 problems which i can not solve, so any help would be appreciated:
1. is there a way to turn off/on all keybindings on the fly?
2. i have several startup programs which are correctly moved to the specified workspace upon start. however, the order of the programs on each workspace is kind of random. for example, i would like to have a shell on the left side, and another program on the right side. how can i achieve this?
thanks in advance!

Go here for your support page and enter your full model number then select the drivers tab, then down on left side select your opersting system for your drivers. http://support.toshiba.com/home
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Same EPM Excel Report takes time to open and refresh on 1 system while it opens and refreshes faster on other system

Hi All ,
I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
Regards,
SHUBHAM

Hi Shubham,
Now day excel problems are due to some MS update. Not sure but have a look at below note.
2107965 - Issues in EPM Add-in after installing Microsoft updates

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Error while creating a support message in satellite system

Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issue

hi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul

System Image Restore in Window 8.1

I have not been able to find a data migration application that works at cloning a Windows 8.1 hard drive to a new SSD. With that in mind I want to go about moving the contents, data and operating system from my working C: to a new SSD. I want
to go about it as if I have backed up my system, my C: drive has failed so I need to install a new drive and restore my data and operating system to the new drive. I can't seem to find any simple (this should be simple) straight forward way to do this
nor can I find any form of written instruction on how to go about this.
I would love to have someone articulate this. As it stands I have a fully operational intact C drive. I have completed a disk image to a second separate hard drive. I now want to restore that content to a third (SSD ) drive.
Where do I begin?

There is a system backup tool called System Image Backup, follow these steps to conduct this:
Swipe in from the right edge of the screen, and then tap Search.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.)
Enter File History in the search box, tap or click File History, and then click System Image Backup at the left part.
See the screenshot as below, you can backup it on local machine or a DVD or a network share folder:
Besides, I need to point out that this backup method will generate a vhd file, if you want to restore the system you need an DVD installation midia.
You cannot just restore a vhd file directly to the hard drive.
regards
v-yamliu

I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend.

How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
I need to use my Adobe programs, rescue my email, i-tunes and iphoto data. The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash. There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine. Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

No, the disk was backed up with time machine a few hours prior to the crash. I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up) was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available. And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive. I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed. But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive.
I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder). And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash. That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up. Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive. So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
Thanks for any help. Peggy
Message was edited by: peggy toole

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Logical System in IDOC-XI scenario

Hi,
I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No. 2) Logical System.
my questions are
a) Are we use Logical System in B to B scenario ?
b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
Thanks and Regards
Mahesh.

Hay Kumar,
Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
Have a Good One,
Uri Lifshitz.

Refresh System Data in Integration Directory PI 7.11

Hey,
I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
anymore.
Can anybody help?
Thanks!
Michael

I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

Support package / add on import error in DB2 V9.1 / windows 2003 system

Hi
I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
I have selected "Row Compression" and "Deferred Table Creation" during installation.
Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package ALL, tp step "6", return code 0008
The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
2 ETP301
3 ETP361 "96" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
2 ETP301
1 ETP172 MOVE OF NAMETABS
1 ETP110 end date and time : "20090113025807"
1 ETP111 exit code : "8"
1 ETP199 ######################################
I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
Regards,
Nallasivam.D

Hi,
Please find the real error message which I found in the same log file. This is a new installation.
System configuration details:
ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
BASIS and ABAP support pack level: (700) 13.
Error message:
3 ETP399 INDEX IN "IDS#BTABI"
3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
3 ETP399
2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#BTABD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
3 ETP399 IN "IDS#POOLD"
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
3 ETP399 INDEX IN "IDS#POOLI"
3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
3 ETP399
2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N The name "IDS#POOLD COMPRESS YES" is too lo
2EETP345 ng. The maximum length is "18". SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG
2EETP345             "
2 ETP399 -
DB-ROLLBACK() -
2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
Regards,
Nallasivam.D

Opersting System

Similar Messages

Maybe you are looking for