Opinion - "n" wireless adapter for pc notebook

I would like to add a wireless "n" adapter to my pc notebook that is compatible withe the AEBS. USB or PCMCIA would be fine. What are your suggestions?
Thanks is advance.
Greg

Hi: HP used to have a BIOS whitelist on notebooks made beyond the last year to 15 months ago. It seems to have been removed for most models, but none of us know which ones.  However many forum members have been able to install different wireless cards in their new HP notebooks. For example, I bought a HP 350 G1 notebook in February.  I replaced the wireless card with an older Intel 6230 I had lying around to see if I could screen mirror my notebook to my smart TV, since the 6230 is WiDi capable.  It worked just fine and I was able to screen mirror my notebook to my TV. Now that I know I can install whatever card I want, I just ordered an Intel 7260 dual band card.  If you can easily access the wireless card in your model (the service manual shows you can), and it has two wireless antenna terminals connected to the wireless card, you should be able to install any model wireless card you want. http://h10032.www1.hp.com/ctg/Manual/c04501633

Similar Messages

  • Using Airport Extreme as a wireless adapter for an xbox 360 and/or computer

    I have a wifi network that is successfully broadcasting internet, i also have a spare Airport Extreme that i would like to use as a wireless adapter for my xbox 360.
    My Existing network is being broadcast from a D-Link modem so it doesn't support "extending a network" with airport extreme
    What i want to achieve is:
    Wifi Internet being broadcast by d-link, received by Airport Extreme WIRELESSLY, then sent via a WIRE to my xbox 360's ethernet port so that i can access internet on my xbox 360.
    Unfortunately:
    My Xbox 360 doesn't have built in wireless
    Connecting to the d-link network wirelessly (with the airport extreme) doesn't seem to give me a wired internet connection (from the airport extreme)
    I don't want to extend the network wirelessly
    Any help would be appreciated
    Thanks in advance to any users who know how to solve my (probably simple) problem

    Welcome to the discussions, DanSwiggsD!
    If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
    If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
    If you don't have an Apple device as your main router you have a few options to connect the xbox:
    1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
    2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
    Message was edited by: Bob Timmons

  • Can I get a wireless adapter for my computer then wire my Xbox from that?

    Hi everyone. I live in an apartment next door to my shop and we have internet there so i hooked up a wireless when I moved in so I wouldnt have to put internet in my apt to. I get signal because the building isnt that far away but it is alittle weak. I want to get a wireless adapter for the computer but i was wondering if i could get one that my xbox will connect to. Can you guys give me some advice.

    Hi you can get wireless adapter WUSB300N for the desktop or WPC300N for the laptop.Both, work great with the wireless router WRT300N.I advice you to open setup page of router using 192.168.1.1 for doing the wireless settings where the wide channel set to 20 MHZ frequency & standard channel set it to 11.Also, if you wnat to enable wireless security make sure you choose WPA as it works great with the N - series linksys products ie., with the WRT300N router & N - series adapters.

  • Do I need to buy wireless adapter for Equium A100-027?

    Hi, don't want to seem a complete idiot but, can anyone tell me if I need to buy a wireless adapter for my Equium A100-027? Not very good with technicalities I'm afraid and don't want to buy anything I don't need!!! Thanks

    Hi mate, no you dont, its built in, its on the side were the cd drive is, near the two usb ports...
    Message was edited by: GhostUK

  • Which driver will enable wireless adapter on my notebook

    I recently purchased hp 15 notebook r204tu I am confused about which driver should I use for wireless internet access .When you go on hp website for drivers they have given 7 drivers I donot know which one would work please can any provide link to the driver or name the manufacturer of the wireless adapter I m using windows 7 64 bit sp1
    This question was solved.
    View Solution.

    HP uses various brands of wireless adapters in their laptops.Your driver page has Broadcom & Qualcomm Atheros drivers so it is likely you have one or the other. You can try both- or get the hardware id of the wireless adapter. From Device Manager, right click the adapter, choose Properties. In the window that opens click the Details tab. Use the dropdown selector to choose Hardware ID. Use the top line that appears and do a search for that string to find the device name. Or you can post it here.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Can and Airport Express be used as a wireless adapter for a computer?

    Or to rephrase - Can an Airport Express that's connected to an existing wireless network wirelessly let a computer without a wireless adapter connect by plugging the computer's ethernet into the Express ethernet?
    This would turn the Express into a fairly stupid and expensive wireless adapter, I'm sure, but it might be a handy trick in a pinch.
    Thanks
    MJ

    Yes. For example, with the latest "n" version, if you update to firmware 7.3.1, you can set it to "Join a wireless network" and tick the box "Allow Ethernet clients". This will do as you describe.
    This works for me with a PC that is both a Windows box (XPsp3) and a Linux box (OpenSUSE 10.3).
    However, I am less than enamored with my Express in this mode. It has frequent disconnects, when the thing just looses the wireless connection for some reason. If you are in the US, there may be other options you want to consider - or wait until a 7.3.2 update and hope that it fixes the general unreliability f the current Express. Here in UK, there are few other options.

  • The wireless adapter for my officejetH​470 will only intermitta​ntly connect.

    The 802.11b/g adapter will sometimes get the blue light showing connection.  With any power interruption, the blue light will not come on and connection is lost.  It seems that the adapter will come back on with no explanation

    Hi you can get wireless adapter WUSB300N for the desktop or WPC300N for the laptop.Both, work great with the wireless router WRT300N.I advice you to open setup page of router using 192.168.1.1 for doing the wireless settings where the wide channel set to 20 MHZ frequency & standard channel set it to 11.Also, if you wnat to enable wireless security make sure you choose WPA as it works great with the N - series linksys products ie., with the WRT300N router & N - series adapters.

  • How do i install printer software for wireless connection for a notebook?

    Product name: Photosmart 6510
    What to do when my notebook laptop does not have a disk drive but has wireless internet. How can I install the printer software on the CD?
    Kind regards

    You can download the printer software from the internet. Here is the link for your specific printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058336&cc=us&dlc=en&lc=en&product=50583...
    Choose your operating system and then go to Driver--Product Installation Software and choose the Basic or Full driver.
    Let me know if you have additional questions.
    I work for HP.

  • Help using powerbook as wireless adapter for Xbox 360

    Ok I need help partially opening my NAT. I have a Linksys WRT54G. And I play on Xbox Live a lot. The other day I moved the xbox into my living room where our new tv is and then I hooked my G4 Powerbook up to the xbox and did internet sharing because I have no internet connection in there besides wireless. Whenever I use a wired connection on the xbox is says my NAT is open. But whenever I use my laptop it says my NAT is Moderate, and it makes it hard to get into any games. I don't want to chip out the money for a $100 microsoft adapter because I will rarely play xbox in their. So how do I go about opening up the NAT the rest of the way.
    http://www.ofzenandcomputing.com/zanswers/61 there is how I did it, but I setup the xbox with a static IP
    On my router I have ports 88 and 3074 open which make the NAT open on wired connection. So I am thinking I may need to open those ports on the laptop itself? I am not sure if I can open ports on the laptop for outgoing connections.
    Thanks for the help!

    A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
    If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
    Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

  • Xbox 360 wireless adapter for windows 8.1.

    would the xbox 360 wireless receiver adapter work with windows 8.1. because i'm having a problem that my controller keeps getting disconnected for no reason.  

    Hi,
    Regarding your problems about not connecting the controller to the adapter, I suggest you replace the batteries or recharge the battery pack.
    Meanwhile, I would like to verify if the controller is recognized in Device Manager. How about changing different USB ports?
    Please reinstall the latest driver of the receiver adapter and the controller from Microsoft.
    If the issue persists, I would recommend you to contact Xbox support for further assistance.
    http://support.xbox.com/support/en/us/nxe/contactus.aspx
    Regards,
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Usb wireless adapter for solaris 10 on sparc platform

    Hi,
    First and foremost, I hope that this stands in the right place.
    I need to configure my Sun Fire V240 to connect to my wireless network (wifi).
    Just wondering do we have the list of usb wifi adapter (and driver) that can work in Solaris 10 on Sparc platform?
    Or, can I have the list of Solaris supported PCI wifi adapter and driver? It would be great if instruction included.
    Thanks in advance.

    Hi guys, I also had this situation and since I was not able to convert the package to a datastream, I downloaded it from http: //www. sunfreeware. com/mozilla .html
    They also provide some readme files that can be of help.
    Once you have the datastream package you can install using pkgadd utility.

  • AirPort Express as a Wireless Adapter For Xbox 360 and to stream PC audio?

    Ok, so I am wondering if I can do this config with an AirPort express. I want to connect the AirPort to my existing WiFi, and be able to plug in an Ethernet cable connected to an Xbox 360 to get Xbox Live, as well as stream audio from my PC. Is this possible to do at once? Also, is it possible to stream PC audio, not just iTunes music? Thanks for your time.

    Hello podalex,
    Just an FYI for you with regard to the Airport Express:
    It is always best to check with the software manufacturer FIRST. They will tell you if they have tested the product and the version, as well as whether or not it will work with Windows 7.
    Check out the Windows 7 Compatibility site: (There you will find out about hardware and software compatibility.)
    http://www.microsoft.com/windows/compatibility/en-us/default.aspx
    There is a pulldown from which you can choose "hardware" and "software".
    There are also some great articles, instructional videos and such to help with your Windows 7 at our Springboard site:
    http://technet.microsoft.com/en-us/windows/default.aspx
    In any event a lot of the times, Vista drivers will work in lieu of Windows 7 drivers, however, it's not 100%!
    As stated previously, it's best to have the Windows 7 certified drivers installed.
    Microsoft does have an official Windows 7 Support Forum located here http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/ . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assitance and support.
    John M
    Microsoft Windows Client Team

  • Which is the best USB Wireless Adapter for a MacBook?

    I have a MacBook Pro 13" (Late 2011), nowadays I have a lot of problems with the Wi-Fi connection in my University (translated):
    PHY mode: 802.11n
      Channel: 1
      Country code: MX
      Network type: Infrastructure
      Security: WPA2 Enterprise
      Signal/Noise: -59 dBm / -86 dBm
      Transmission speed: 52
      MCS index: 5
    I am not the only one with this problem, almost every Mac and computer has the same problem, the question is "What is the best Wi-Fi USB adapter I can buy to improve my connection?". I know there are a lot of answers to this question the problem is many of them are very outdated.
    Finally, the problem only happens with this network, my home connection. Some people using PC's have bought Wi-Fi USB adapters and their connection improves a lot.
    Thank you.

    Give the Edimax EW-7811Un a try. I am curious if it solves your wifi problems!

  • Using Gigabit Adapter for intranet access, wireless for internet access

    I have a PowerMac G5 I have been using with a built-in wireless adapter for a couple of years. I also have a Windows PC with a wireless adapter as well. Both of these access the internet over my AirportExpress connected to a cable modem.
    I wanted to take advantage of the Gigabit adapter in the PowerMac for copying files directly between the computers, so today I installed a Gigabit card in the PC and connected the two through a Gigabit switch.
    Unfortunately, I can't seem to get either the Mac or the PC to get valid IP addresses, let alone talk with each other.
    Any idea what I need to do on the Mac to get it to use the gigabit adapter for intranet traffic? I am guessing whatever I do on the Mac I will need to also do on the PC.
    Thanks!
    Brian

    What you're trying to do is called 'dual homing', and it's not really supported by OS X's automatic network configuration, though 'Internet Sharing' is close.
    I'd avoid it if at all possible. Connect the computers and the cable modem to the Gigabit switch. If the switch doesn't have routing capability, you might need a router also, to provide DHCP and NAT services. This would save you a lot of grief compared to figuring out how to set up the Mac and Windows for dual-home operation.

  • Need Wireless driver for Satellite L505-10h

    Can someone help me whit finding Wireless driver for L505-10h, And tell me how to install it.
    And how to find my wireless adapter via my notebook?
    Thanks.

    Hi mate
    The notebook seems to support Realtek Wlan card RTL8191SE.
    You can find the drivers here:
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    In order to install this you have firstly download the driver package, then unzip the package.
    In the driver package the exe file should be available. Execute this exe file and the installation should proceeds.
    Good luck

Maybe you are looking for

  • How can I get effects automation to work?

    I'm sure I'm missing something here but I can't work out how to use effects automation. The help topic says open the automation tab click "add automation". I do that and get another dialog box where I select the effect (echo/reverb for instance) and

  • Work with text with blank spaces, how separate text?

    Hi: I have a problem in abap programming, I hope you could help me. I have a txt file, with a code and its description. I have this file uploaded to a sap internal table, in same field of internal table are code and description. The problem is next: 

  • Cisco MDS 9509 and HP Blade server problem

    I have a big problem , when i connected to MDS 9509 to HP VC-FC 8GB the module in MDS 9509 did not detect the HP module . I think this will be because MDS 9509 uses VSAN technology , but HP blade is not support this feature. Please help me

  • W/D Learning Material

    hello all, i am newer to webdynpro n want to learn it. if any one has some material and links related, plz do forward me at [email protected] regards, vikas

  • I am a novice and know nothing. Please Help!!!

    Hi, I recently purchase a used Treo 700W.  I was trying to purchase a Treo to sync with and integrate with my existing Palm contact list, calendar etc.  Now, I realize that I should have purchased the 700P (I just figured out what the P and W mean.)