Opinion on Mighty Mouse & Original Apple Bluetooth Mouse

I just received my bluetooth Mighty Mouse today and I have to say it's an excellent mouse!
Pros:
Compared to the original Apple Bluetooth Mouse, this one is lighter (much lighter). It also tracks better than the original Apple Bluetooth Mouse. My desktop is a piece of grey plastic and with the original mouse, it was not able to track at all. With the new wireless Mighty Mouse, it works just fine!
I also love how one can zoom in by control-scrolling. Excellent feature!
Almost everything works well.
Cons:
Like others have said before, the one minor complaint is the side squeeze buttons. Only if the squeeze buttons were just slightly less tight. But I would not say this negative is any reason to not get the Mighty Mouse.
Also, unlike the original bluetooth mouse which has a slider to adjust the pressure of the click button, this one does not come with that feature. Not a big deal, nevertheless.
Good job, Apple!

It's not for any help, but me too have the same problem.
My mighty mouse, lose connection in a random way with my MacBook Pro 17" Unibody.
I've an iMac at home, with another mighty mouse, so I try to exchange the two, but any one of the two mouse work right with the iMac and have the same problem with the MBP.
Maybe for 1/2 day, there is no problem, and after that in an hour the lose connection happen 2/3 times.
I try like you to delete the .plist file and reset PRAM but the only difference is that now the bluetooth icon in the menu bar correctly shows the three dots of the connection, but as always at random, the mouse stops working and the pointer remains stationary on the screen.
The only solution is to manually disconnect and then click a button on the mouse to reconnect.
My only hope is that with the arrival of Snow Leopard and the next "clean installation" the problem disappears.
I'm sorry can't give you any help.

Similar Messages

  • Really slow and jerky cursor with my apple bluetooth mouse, can you help?

    hey.
    i have the apple bluetooth mouse and keyboard, they were working perfectly (keyboard still does) until they ran out of batteries one day. i reverted to the wired set up and (lazily) didn't get batteries for a while (month or so). When i did the keyboard responds as before but the mouse is painfully jerky and slow. i have re-paired the mouse and changed the batteries twice, it is so annoying i now use the bluetotth keyboard and wired mouse. any advice/suggestions gratefully recieved.
    many thanks.
    james

    it is so frustrating isn't it. i now sit looking at the bluetooth mouse whilst getting tangled up in the cable of the wired mouse!! i was going to buy the new wireless mighty mouse hoping that that would solve/bypass the problem but reading what you have all put is definately making me wary of that. it seems so simple doesn"t it, nice uncluttered desk, pretty foolproof technology. if only... seems that no matter how clever these things get they are still not smart enough. i have been looking elsewhere for solutions but no luck as of yet, if i find any i'll let you know.
    regards,
    james

  • Windows 8.1 and Apple Bluetooth Mouse and Keyboard connection

    I recently upgraded to Windows 8.1 from Windows 8.0 Home and as a result I'm experiencing the following problems:
    Apple Bluetooth Mouse - randomly dis/connects or freezes where I cannot move the mouse or it's very jerky or very slow.
    Apple Bluetooth Keyboard - the keys will stick or freeze causing the redundent key presses (eg. yyyyyyyyeeeeeee).
    I've done the following to fix the problem with no success:
    Reinstall Boot Camp 5.0.5033 drivers
    Reinstalled Bluetooth drivers from Boot Camp 5.0.533 individually
    Unistalled both devices on OS X and reinstall them only on Windows 8.1
    Reinstalling both on OS X and reinstalling them on Windows 8.1
    Uninstalling all the drivers from the Device Manager and reinstalling them
    One thing I have noticed is that under Devices and Printers I have two new devices (HID-compliant mouse and HID Keyboard Device) that were not there under Windows 8.0 in addition to my bluetooth devices.  I have tried removing the new devices but they keep reinstalling themselves.
    I have USB mouse that's connected and I've been able to use that without problems so I think there's a problem with the Apple driver or the Windows 8.1 bluetooth drivers.
    Has anyone fixed this?
    Thanks!

    Just to point out the "Bluetooth Collaboration" setting I've found this:
    Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.
    And it is not enabled by default on some devices like on mine!
    http://chasms.com/wireless_utilities/broadcom/props.htm#toc_51

  • My apple bluetooth mouse is not being recognized by my macbook air - and it was yesterday!

    My apple bluetooth mouse was working perfectly with my macbook air until I had to change the batteries.  Now it is not discoverable and I really can't operate without a mouse.  I tried another logitech usb mouse and that was not discoverable either.  Please help!

    Today, when I turned on my iMac, neither my bluetooth mouse or keyboard were recognized. I had to connect my old USB keyboard-mouse to type this message.
    And yes, I restarted my iMac, didn't help.
    Can someone help?
    PS: Barry, "resetting SMC" doesn't help

  • Using an Apple Bluetooth mouse with a pc

    Is it possible to use the Apple Bluetooth mouse with a pc and windows XP using WIDCOMM. I've tried to connect mine and although the pc sees the mouse, it tries to pair using a security code. This is despite the fact that it later says a security code is not required! Anyone got any experience of this?

    Problem solved. Security code 0000 entered, mouse paired with pc and everything worked beautifully.

  • Any issue about Apple Bluetooth mouse ???

    Hello there
    I was reading so many issues about the Apple Bluetooth mouse in the Apple Store page for this item.
    I was reading it because i want to change my Kensington PilotMouse for the Apple mouse. Actually i have so many issues with the PilotMouse, like the lately wake up on the sytem startup, battery eater and so many times work in slowly way.
    I don't want nothing of this with the Apple mouse and i read all of this in the feedback pages. I love the 3 buttoms from the PilotMouse but i prefer the technically "no problem way" from Apple.
    Any of you know any issue about the Apple Bluetooth mouse (before go to store for one) ???
    I have a good experience with the Apple Bluetooth keyboard (i have one), but i don't know nothing about the mouse.
    Thanks for any recommendations or comment about this item.

    Hello junihh:
    I use one myself and it has performed flawlessly. I have no other data except my personal experience.
    If you scan this forum, you will find posts about problems. Those are not representative - only people with problems post.
    Barry

  • Airport Locks with non-Apple Bluetooth Mouse

    I have an iBook 12" G4 1.33GHz 1.5GB RAM, internal Airport Extreme, Bluetooth, etc.
    I have tried several non-Apple Bluetooth mice and they create the same problem: Airport stops working and when I put the mouse pointer on the menubar Airport icon it turns into a spinning disk. I have looked in the log files but can't see anything useful. I have to reset the computer to get it to work properly again. If I use an Apple bluetooth mouse this does not ever happen. I am trying to use the same Logitech mouse that I have used perfectly well for over a year on my Apple Mini G4.
    Any ideas anybody?
    Nick
    SW England
    All sorts Mac OS X (10.4.9) 4 bits are in a nibble

    Try configuring your base station to operate on a different channel. Change the channel until you find a channel that works better or you run out of channels.

  • Mighty Mouse working except no mouse listed in bluetooth mouse options

    the mouse works fine, but i don't see the mouse in the bluetooth tab of the keyboard & mouse settings, (no name, battery level is empty)

    I talked to Apple-US yesterday and aparently the same here.
    I just realized (because I'm new to mac and the mighty mouse) that I didn't have any of the advanced options either, including usage of the side squeeze buttons (which should have been configurable in the mouse tab of keyboard&mouse, but mine showed basic config like a generic mouse)
    The solution: Apple is shipping a new mouse to me. After doing a couple of diagnostics and resetting the mouse, and a couple of things on the macbook (no idea what they were) they're sending me a new one
    When I get the new one and it works, i'll mark this as solved. Otherwise... who knows?

  • Apple Bluetooth Mouse Problems ?

    Hi my bluetooth mouse is really playing up, for example when i move the mouse the tracking is really off... i have to keep disconnecting then reconnecting to make it work propley.....
    i just repaired the bluetooth connection 6 times to make the mouse work properly.... Has any one had this problem, if so what is the fix ? Also my wifi card has failed i do know the bluetooth card is on top of the wifi card maybe thats casuing the problems?
    Also i have purchased a liace usb 3.0 portable harddrive i did read some where that usb3.0 does interfere with bluetooth connections on macbooks i could be wrong ? Thanks

    Hi, Colin!
    The most closely related Apple KnowledgeBase articles to what you've described that come to mind are:
        • Apple Wireless Mouse: How to Install or Replace Batteries
        • Apple Wireless Keyboard and Apple Wireless Mouse: How to Check the Battery Level
        • Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
        • Bluetooth: How to Set Up Your Apple Wireless Mouse. [1]
    These articles are a good place to start with troubleshooting this problem.
    When you're having trouble with your iMac G5, searching the KnowledgeBase can often be a big help. Notice that several categories of resources are available. If you have any difficulty at first adjusting to the search engine (I did), check out the ~new Search Help webpage.
    I'll post back a little later with some further comments about what I've observed of my (& other folks') difficulties and solutions with changing batteries and reconnecting, etc.
    Please post back to share your progress and to discuss this further.
    Hang in there!
    Warm regards,
    Dean
    [1] Please note that having a backup "wired" mouse may be required to resolve Bluetooth connection problems. As the "How to Set Up..." article cited above says:"Use a Wired USB Keyboard and Mouse During Setup
    
During the setup process, you'll need to use a USB mouse before the Apple Wireless Mouse can work. Keep a USB mouse connected to the computer until you've completed setting up the Apple Wireless Mouse. After setup is complete, you can disconnect the USB mouse."
    In my experience, a "wired" keyboard is only required when there's a connection problem for which using a startup keyboard shortcut is a critical troubleshooting tool.   (Some of the startup key combinations for Intel-based Macs are different.)
    [1,995 ⊥ 3,365]

  • Apple Bluetooth Mouse

    Since restarting after installing security update 2006-007 my mouse refuses to work even though,according to Bluetooth Preferences,it is Configured,Paired,Favourite and Connected.Choosing Set up new device from either the Bluetooth icon in the Menu Bar,or Keyboard and Mouse Preferences,or Bluetooth preferences makes no difference,even after an hour or so of watching the icon moving to the Disconnected state,bringing it back to Connected by either clicking the mouse or Recycling its switch it still refuses to work.It has new batteries.I have noticed that in the Bluetooth section of Apple Profiler,against the sub-section "Services","Apple core Services" is not assigned as it would be were the Mouse behaving properly.Relocating the Bluetooth module in another USB Port makes no difference.I am using Apple Bluetooth Software version 1.7.8f2.Does anybody have a solution to this ?

    Since restarting after installing security update
    2006-007 my mouse refuses to work even
    though,according to Bluetooth Preferences,it is
    Configured,Paired,Favourite and Connected.Choosing
    Set up new device from either the Bluetooth icon in
    the Menu Bar,or Keyboard and Mouse Preferences,or
    Bluetooth preferences makes no difference,even after
    an hour or so of watching the icon moving to the
    Disconnected state,bringing it back to Connected by
    either clicking the mouse or Recycling its switch it
    still refuses to work.It has new batteries.I have
    noticed that in the Bluetooth section of Apple
    Profiler,against the sub-section "Services","Apple
    core Services" is not assigned as it would be were
    the Mouse behaving properly.Relocating the Bluetooth
    module in another USB Port makes no difference.I am
    using Apple Bluetooth Software version 1.7.8f2.Does
    anybody have a solution to this ?
    Problem solved by downloading and reinstalling Mac OS 10.4.8 Combo Updater

  • Apple bluetooth mouse slow, possibly even sluggish?

    Ok, my bluetooth apple mouse has started to annoy me, it seems to be quite slow (i usually use a MS wirless mouse, but decided to try out the apple one again) basically its just quite slow and very hard to move it just a small distance.
    To fix it I have:
    cleaned the optical sensor
    changed batteries
    moved it to fastest tracking speed
    re-set it
    used it on different surfaces
    updated bluetooth firmware
    basically everything I can think of but no joy, it still seems slow, is there anything I can do or is it likely to need to be replaced?
    Also my microsoft one is on full speed, and its just about right although i would like it a bit faster, is there anything I can do?
    also what does the small + and - switch do its the one under the battery cover
    Cheers for the help guys

    I am experiencing the same issue. I have done a good bit of troubleshooting to narrow down the problem, and i wanted to share those results with this thread in hopes that we can come to a conclusion and hopefully fix it.
    First off, this issue seems to be isolated to bluetooth wireless devices and wireless network traffic. I have a Logitech G7 bluetooth wireless mouse, and my Macbook is the 5.1 version
    I have seen other threads that are trying to blame their mouse lag on their monitor, and have said that plugging the monitor's power to a different wall jack fixed their problem. This made no difference in my situation. Even having my External monitor completely out of the loop, i still experienced issues with bluetooth mouse + traffic over the wireless causing significant hitching and lagging of the mouse during the period of the traffic (i.e. copying 500mb file over network).
    When i have my bluetooth mouse hooked up and i am copying a large file over the wireless, it lags horribly. If i take my hand and use the trackpad on the laptop itself *during the same copy*, it works fine... it is ONLY the bluetooth mouse.
    If i hook an ethernet cable directly to the laptop, all issues with lag are gone when i use the network.
    So to recap:
    ethernet cable + bluetooth mouse + network traffic = no mouse lag
    wireless ethernet + trackpad + network traffic = no mouse lag
    wireless ethernet + bluetooth mouse + network traffic = HORRIBLE MOUSE LAG
    ON TOP OF THAT.... the issue is EXACTLY the same in Vista as it is in OSX

  • TS3048 Mountain lion and old apple bluetooth mouse sync problems

    I just purchased the a MacBook Pro with Mountain Lion installed.  I am trying to pair it with my old bluetooth mouse modle number A1197 with the small scroll ball at the top.  I cannot get my computer to recognize this mouse at all.  Is there any solution or do I just have to buy a new mouse?  The mouse still works fine and has not difficulty synchronizing with my desktop --but Mountain Lion is not yet installed on the Desktop.

    A Bluetooth device may only pair with one thing at a time.
    Barry

  • Apple Bluetooth Mouse won't work in Bootcamp Windows XP

    I just purchased a new MacBook at The Apple Store and they installed Boot Camp with Windows XP for me. I also purchased an Apple Blue Tooth Wireless Mighty Mouse. The Blue Tooth mouse works just great on the Mac side, but it will not setup and install on Windows. The Wizard Setup finds the mouse just fine and it looks like everything has gone smoothly until about the very last last step. It gets hung up on the 'Passkey.' It doesn't matter what I check when it asks for a passkey...no passkey, set your own passkey, use passkey that came with mouse, etc. It doesn't like anything that I put in. At the end, I get the following message: "Windows was unable to exchange passkeys with your device. The device has indicated a passkey exchange failure." No passkey came with the mouse. I thought I would check here today for any ideas on what to do, but will take it into the Apple Store this week if necessary to see if I can resolve the issue. Thanks!!
    Sunny

    Hello,
    Try the suggestion on this thread: http://discussions.apple.com/thread.jspa?messageID=7475107
    Here also: http://forums.macrumors.com/showthread.php?t=630024
    Carolyn

  • Apple bluetooth mouse. From desktop to doorstop in one month.

    I was prompted to change the batteries in my bluetooth wireless mouse, which I did. Now the mouse is recognized and paired but it will NOT move the pointer. It will click, but the pointer does not move. I've searched and found that others have had similar problems, but so far no solutions. Can anyone help me?

    I am having this problem as well.
    In my case I have MacBook Pro (Late 2011) and I am using Apple Keyboard and Apple Trackpad. They are running well for 15 minutes or so and then the trackpad is jumpy and keyboard is lagging. I have to restart the Bluetooth in my MBP so they are running well again. It is so annoying.
    I am using the latest version of Yosemite.
    Please fix this.

  • The last good mouse Apple made? Re:  Apple BlueTooth mouse on a MacBook?

    Hi.
    I am interested in buying an Apple BT wireless mouse (the full sized clear plastic with white base) off eBay or other site since I want an Apple mouse for my MacBook but I don't care for the Mighty Mouse.
    I was speaking with another Mac user recently and he said it is not likely to work with my MacBook. Were these mice reliable with the PPC Macs? Will they work with my MacBook?
    Any thoughts or advice would be appreciated.
    Thanks in advance to all who reply.

    Question not answered but I want to get rid of the post in my list.

Maybe you are looking for

  • Error while running a Discoverer Workbook with parameter from command line

    I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the pa

  • TO get all values in survey data

    Hi abapers, I have a problem when i am trying to fetch the data of CRM transaction. This is used in (Questionnaire of  CRMD_ORDER)  transaction. The Questionnaire answer is  usually  more than 255 characters. But the FM im using is returning only 255

  • Dreamweaver CC has "internal error... while resizing a view" when asked to creat a fluid grid layout

    Excited for expanded fluid grid layout features it had, I got Dreamweaver Creative Cloud SPECIFICALLY for that feature. Sign up, download, install went smoothly. Open Dreamweaver CC, create new fluid grid layout, hit OK, name and desigante location o

  • HP Envy 4504 won't scan.

    My HP Envy 4504 won't scan.  Windows Vista Home Basic 32-bit.  Has worked well in the past.  Print-scan doctor says it's all set up, but "test scan" gets an error message.  Wireless printing works.  Tried re-installing, rebooting and turning firewall

  • Table of content level limit

    how can I display more than 3 level in a TOC webpart? can I just modify the xsl to achieve this?