OPM Accounting Pre-Processor - Error while Submitting the Program

In R12 Vision Instance, I am trying to submit the OPM Accounting Pre-Processor Program and it is giving the error as per below
Open Period not found for Legal Entity PRU-Vision Process Industries (US), Cost Type STND, Stard Date 01-JAN-2010 00:00:00 and End Date 31-JAN-2010 23:59:59.
I checked the GL Periods, the GL Period are open.
I checked the Costing Calendar, I have created a Costing Calendar for 2011 and STND Cost Type and the Periods are also open.
Is it something I am missing here ?
Tried searching on MOS, couldn't find much.

We were able to find it.If such error comes just check the data template and layout template.Try to run it in Template Builder and if its without any error then try it by submitting the conc pgm.
Thanks.

Similar Messages

Errors while submitting the SQL * Plus Report

I am getting th efollowing Error while submitting the Concurrent request to run a report.
FND_CANNOT FIND FILE
concurrent manager encountered an error while running sql * plus for yours concurrent request
Please respond ASAP

Hi,
Duplicate post see:
Please advise on the Error immediately
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Error while running the program of deferred Tax ( New)Program Name RFUMSV50

Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PM

Check the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Unable to use the Copy function while submitting the program for XML output

Hi
when i submit the concurrent program with XML output type, getting the output..
when i submit he concurrent program using the copy button not able to get the output,
my observation
while submitting the program the xml template is not called....
Diagnostics--> view xml -- able to view the ouput.
do let me know if any of the steps is missing while registration in the xml responsibility..
this is only with the custom conc program.. the standard program is working fine...
do help me out..
Regards
Yram

It's really a little difficult to answer your question without a bit more information. What version of JDeveloper are you using? What's your technology stack?
If this is JDeveloper 11+g+, with the Fusion technology stack, you can use a technique like the one described here:
http://groundside.com/blog/GrantRonald.php?title=jdeveloper_11_business_services_cascadin&more=1&c=1&tb=1&pb=1
If it's JDeveloper 10.1.3, with the default Web technology stack, look here:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#62
If, as it looks like, this is really a question about generic JSPs (no JSF), you might actually have a bit more success on a generic JSP forum--using scriptlets hasn't really been best practices within JDev since...well, since JSTL became available, really. That was a number of years ago.
Like I said, there's really no direct way to use Javascript output in a scriptlet--unless you mean something like storing Javascript output in a hidden field, and using the value in a scriptlet on the next request. But by the time Javascript runs, any scriptlet from the current request will already have executed.

Error while submitting the Invoice

Hello Everyone,
We are using SRM 5.0 with Extended classic scenario.
I am having a problem while submitting the Invoice.
I keep getting errors saying I need to enter a quantity for a line item that has already been billed in full. When I enter a quantity I then get new error messages telling me I've exceeded amount for that line item.
Please help me in this.
Thanks & Regards,
Khushbu.

Hi,
This is typically a process issue. There are a few things I think you can do...
a. If the invoice has reached customer already (bcoz it was raised in the month of May), then, as you now cannot cancel as there has been a lot of wrong entries, you an create a credit memo either from SD side or from FI side so that the customer a/c is balanced and it will not show any AR balance.
b. Raise a debit memo request against the right customer and invoice it.
I think you have to work with your Finance people to be in concurrence before you take up he above process.
Thanks
Mukund S

Error While Submitting Concurrent Program

Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & Regards

914618 wrote:
Hi all,
While submitting Concurrent Program in HRMS to check the Seeded Output,I am getting the following Message
app-fnd-00314 invalid printer ( not print ) and print style (ZA PS Portrait) combination.
Could someone please tell me How could I figure it out.
Thanks & RegardsWhat is the type of the concurrent program?
Are you printing to specific printer or to noprint?
Please see the solution in these docs.
Accrual Reconciliation Report Errors With APP-FND-00314 Invalid Printer And Print Style Combination [ID 564009.1]
Cash/Bank Book Report Error APP-FND-00314: "invalid printer and print style inloc_bacs” [ID 551975.1]
Quarterly Tax Return Worksheet (Form 941) Fails With APP-FND-00314 [ID 307701.1]
Thanks,
Hussein

Error while executing the program 'RBDMIDOC'

Hi Experts,
While executing the program RBDMIDOC
I am getting the following errors
One error in Communication data :
1)    No data distributed because of conversion errors
Two errors in Data selection and formatting :
1)    No ISO code found for the country key NT in the field NATIO
2)    Conversion error: infotype 0002, object 01,P,00000033
I am having change pointer entries in BDCP table.
Can anyone please tell me how to resolve these errors....
Thanks in advance...

us the program
RHALEINI

Stale data error while submitting the form(before that opening the popup )

I am using OAURL to open a pop-up in my oaf page
passing my page to this class.And at the time of loading the base page
the pop up window url is like this
OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=10
now i click on the link to open the pop-up
its opening the pop-up.
Closing that pop-up.
Saving the details entered in the base page.
Now it is executing again from the processRequest() of base page
now the URL like this...
OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=11
Now i am getting stale data error
The number of displayed records, 2, exceeds the actual number of records, 1, in view object SampleAM.SampleVO1. Some of the displayed records may have been deleted.
Here i am observing that the parameter OAPC is different in these two URLs.
can you please tell me how to come out of this error while i am submitting the base page.
Thanks

Hi Pratap,
Thanks for your information.But there i didn't get any information related to my issue. can you please tell me a way to proceed further in order to solve this issue.
Thanks
Satya

Interface data contains errors while submitting the Bid by vendor

Hi
This is with regard to strategic sourcing. Purchaser carried out a sourcing with start date 05.03.2010 and end date as 10.03.2010. Now the vendor is trying to create his bid by selecting "Process Bid" option. Vendor is getting Bid invitation no, to create a Bid. Here while submitting he is getting the error as " End date has been reached. The submission deadline has passed", eventhough the end date is 10.03.2010. And getting a message "Interface data contains errors". So he is not able to submit the bid. For all the bid invitation vendor is getting this problem.
How to resolve this?
Thanks

Hi Muthu
Thanks for ur response. It was a no range problem which I found & rectified.
Regds

ERROR while submitting the concurrent program

Hi all,
I need to implement the barcode in my BIP report. For that iam using 3 of 9 barcode font.
I have successfully made the configuration settings in xdo.cfg file and iam able to see the preview of pdf file through BI publisher desktop.
But when iam submitting the request after registering the template file through XML publisher responsibilty iam getting the error mentioned below:
+APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password: +
Iam using Oracle apps R12, BI Publisher 11.1.1.5
So any help is most welcome.
PS: I have seen the previous threads regarding this but i didn't get the solution.

Hi
Can yu check barcode setup in XML Publisher administrator
Note 373377.1 - How To Install a Font Using XML Publisher Administrator
also check blog given below
blogs.oracle.com/xmlpublisher/files/ BarcodePrinting .pdf
Thanks
Kamalakar.G

I got An Error While Executing the Program below

code
import java.sql.*;
import javax.sql.*;
class JdbcJsp5
public static void main(String args[])throws Exception
     Connection con=null;
     PreparedStatement pstselect=null;
     ResultSet rs=null;
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     con=DriverManager.getConnection("jdbc:odbc:crypt","scott","tiger");
     String selectQuery="select message from inbox where userid=?";
     pstselect=con.prepareStatement(selectQuery,ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_UPDATABLE);
               //Run time Error here
     catch(Exception e)
     System.out.println("The Error while Connecting.."+e);
          e.printStackTrace();
     try
     pstselect.setString(1,"krishnarao");
     rs=pstselect.executeQuery();
     while(rs.next())
          Blob binobj=rs.getBlob(1);
     catch(Exception e)
     System.out.println("Error while Retriving \t"+e+"\n"+e);
          e.printStackTrace();
     finally
     System.out.println("\nIN FINALLY BLOCK CLOSING.........\n");
     con.close();
     pstselect.close();
i got an error like datasorce not found at prepared Statement.
Edited by: Chintu on Feb 1, 2010 1:29 PM
This is the stack trace
The Error while Connecting..java.sql.SQLException: General error
java.sql.SQLException: General error
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLPrepare(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(Unknown Source)
at JdbcJsp5.main(Jdbcjsp5.java:17)
Error while Retriving java.lang.NullPointerException
java.lang.NullPointerException
java.lang.NullPointerException
at JdbcJsp5.main(Jdbcjsp5.java:27)
IN FINALLY BLOCK CLOSING.........

Hi,
It seems that the line raising the exception is:
pstselect=con.prepareStatement(selectQuery,ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_UPDATABLE);
I don't know the odbc bridge so I'm just guessing, but you cant try with:
pstselect=con.prepareStatement(selectQuery);
and see what happens.
I recommend you to use the thin driver, with a single jar you can connect to Oracle without having to configure anything on your machine, just supply a database url, a username and a password.
ciao,
Giovanni
P.S. the code you posted is prone to NullPointerException, if you got an exception you catch it in the the first cathc block, bat after printing the stack trace you are going on even if the variables are null.

Error while running the program

Hello everybody
I have installed jdk in my computer, but when I try to run the program it shows the following error
"Unable to load the main class"
The program is compiling properly the only problem is in running the program.
What is the reason for this error and how can I fix this error?
Regards

Are you familiar with the classpath?
It tells the JRE which directory has your *.class files.
At the command line, you would java -cp dir_name class_file_nameIf you're using an IDE, check the menus at the top of the editor screen.

Error While Submitting the Custom Report

Hello,
We have requirement on reports 6i to customise a standard report 'Sales Journal By Customer'. Requirement is we need to add a new fields in the layout.
We have copied the standard program and parameters and defined a new custom program and also added the required additional parameters. But when we are trying to submit the custom program it is giving the following error:
APP-FND-00806: The default value RTT is invalid for the Reporting Context segment. Your default value will be ignored. Please inform your system administrator that:
Add the value RTT to the value set for segment Reporting Context, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
Value RTT for the flexfield segment Reporting Context does not exist in the value set FND_MO_REPORTING_ENTITY.
Standard report call a query inside the rdf.
written in parameter sql stmt.
SELECT ENTITY_NAME, ENTITY_ID
FROM FND_MO_REPORTING_ENTITIES_V
WHERE REPORTING_LEVEL = $FLEX$.FND_MO_REPORTING_LEVEL
AND ROWNUM = 1;
now we are change this to
SELECT ENTITY_NAME, ENTITY_ID FROM FND_MO_REPORTING_ENTITIES_V WHERE ENTITY_NAME = 'RTT';
we are making hard code.
we are making a request and attach that report to that request and run the request.
We have done this customisation at our local instance but we are facing the same issue .We are unable to figure out the issue.
Does any of you have any idea why we are getting this error.
It would be great if you can help us regarding this issue.
Thanks in Advance

as this is an eBuiness-related error, you have more chance to get an answer in an eBusiness-related forum, maybe here OA Framework

DYNP_TOO_MANY_RADIOBUTTONS_ON error while submitting the report.

Hi,
i created 2 programs with same selection screens.
1st programe will call the 2nd programe.
SUBMIT ZReport2 VIA SELECTION-SCREEN
         WITH p_hist = ' '
         WITH p_main = ' '
         WITH p_expul = 'X'
         WITH p_depr = 'X'
         WITH p_uexp = 'X'
         WITH p_repro = 'X'
         WITH p_gjahr = p_gjahr
         WITH p_job   = p_job
         VIA JOB lv_jobname NUMBER lv_jobnum AND RETURN.
At this point of time, it is throwing error with DYNP_TOO_MANY_RADIOBUTTONS_ON
1. I tried by changing the group names in both the reports.
     Report1 have GRP1 & GRP2
     Report3 have GRP3 & GRP4.
Any idea why it is happening. Attached screenshot of dump.

Hi,
You need to explicitly pass the values of all the radiobuttons in the submit report. By default, first radiobutton of every radiobutton group is 'X'. In case you want to call the report based on the 2nd radiobutton of the group. You have to pass
WITH p_rad1 = ' '
          p_rad2 = 'X' .
You are getting this error, because at a time more than one radiobutton of a group is set.
Regards,
DPM

OPM Accounting Pre-Processor - Error while Submitting the Program

Similar Messages

Maybe you are looking for