OPM Process Execution

Hi
Created a formula in OPM Prod Dev. Auto creation of recipe is enabled. Created the Batch for that recipe. All the quantities (ingredients and products) are thribled in the batch.
Please tell me the cause.
Thanks.

Hi Jai
Thanks for your reply.
while creating the document I checked both the formula qty and batch qty. they are same. then you click on ok button in create document opens the inventory shortages window, there the quantities are increasing. then we click on proceed to get the batch number.
Regards
Prem.

Similar Messages

OPM Process Execution and OPM Standard Costing for Poultry Business

I have a business requirement from the client at their Poultry Processing plant where the client feels that the OPM Execution steps are too cumbersome until closing the batches. The client wants to maintain minimum number of batches in Production: one for Primary, one for Secondary and one for Further Processing, rather than having multiple batches based on different formulas. There are 3 main types of processing which can be briefly described as follows:
A.) Primary Processing:
Live Birds (Ingredient) become Whole Dressed Chicken with Neck, without Neck, Liver, Heart, etc... (40 Finished Products)
e.g. Live Birds (Broiler) -> Whole Dressed Chicken with/without neck, Whole Dressed Chicken with/without neck, etc.
B.) Secondary Processing:
Only one type of Whole Dressed Chicken (from Primary Processing) become Chicken Cuts (80 Finished Products).
e.g.[Scenario B1] Whole Dressed Chicken (Broiler) -> Drumsticks, Thighs, Wings, Breasts, Backbone, etc.
[Scenario B2] Breasts -> Filets and Deboned Breasts (2 FGs)
[Scenario B3] Thighs -> Thighs in Plain Bag
Please note that the Whole Dressed Chicken is also sold as a Finished Good as well as an Ingredient for the Secondary Processing.
C.) Further Processing:
Chicken Cuts become 40 Finished Products
e.g Filets -> Chicken Nuggets, Chicken Fries, etc...
The client is using Standard Costing method for its OPM Financials and all the finished products (160 Products in all) are having different production cost. Please note that 1 kg of Chicken Wings is not equal to 1 Kg of Chicken Thighs. Different body parts have different costs. In order to alleviate the maintenance of multiple batches per day on the production floor, the client wishes to have minimum batches. We therefore would wish if you can confirm the below approach to be correct?
a.) OPM Process Execution:
==========================
EITHER should I (Option 1):
a.) Create ONLY 3 Formulas for Primary, Secondary and Further Processing . The 3 Formulas will have all the processing line Finished Products grouped together (as per the scenarios explained above). Formula for Primary and Secondary Processing can also combined together, reducing it to only 2 batches to maintain per day.
b.) Can set any Quantity Values for the Ingredient, Product and By-Product in the Formula details with ANY Cost Allocation (amounting to a total of '1') in the Products section
c.) Set the Validity Rules as 'PRODUCTION' for the 3 Recipes
d.) Complete the steps defined in the 'OPM Cost Management' (as described below)
e.) Create the 2 or 3 batches and record the appropriate quantities at the end of the day before closing the batches
OR should I (Option 2):
a.) Create MULTIPLE Formulas (above 100 formulas) for Primary, Secondary and Further Processing based on the different products processed.
b.) Can set any Quantity Values for the Ingredient, Product and By-Product in the Formula details with ANY Cost Allocation (amounting to a total of '1') in the Products section
c.) Set the Validity Rules as 'PRODUCTION' for the 3 Recipes
d.) Complete the steps defined in the 'OPM Cost Management' (as described below)
e.) Create the MULTIPLE batches and record the appropriate quantities at the end of the day before closing the batches.
b.) OPM Cost Management:
========================
Whether (Option 1 or Option 2) selected, the below needs to be set for OPM Costing:
a.) Define multiple formulas (above 100), as in Option 2.
b.) Set the Quantity value to be '1' for the Ingredient, Product and By-Product in the Formula details with the appropriate Cost Allocation in the Products section
c.) Set the Validity Rules as 'COSTING' and 'PRODUCTION' for each Recipe
d.) Run Cost Rollup at least once so that the products can have an item cost per unit
As per me, for the purpose of Costing, it would be imperative to have multiple batches (created one time only) with appropriate Cost Allocation in the Formulas and the ‘Recipe Use’ in the Validity Rules should be set as ‘COSTING’. Then, setting Profile Option 'GMF: Use Only Costing Validity Rules for Cost Rollup' to 'Yes'. In this way, we are sure that the different products in the formula with correct Cost Allocation will have their Item Cost calculated after performing the Cost Rollup. AND, for the purpose of operations, we can only one combined formula of Live Birds (as Ingredients) to yield -> All FGs for Primary and Secondary Processing with Cuts. But, this time, the ‘Recipe Use’ in the Validity Rules of the Recipe should be set as ‘PRODUCTION’.
I want to confirm which approach (Option 1 or Option 2) is more appropriate in terms of Operations and confirm that the above proposed steps are correct with no circular reference (as certain finished products are also used as ingredients for another product in the Secondary Processing)?
Thanks and regards
Raveesh Nobeen
[email protected]
Edited by: user12189219 on Jan 20, 2010 3:48 PM

Hi Raveesh
I am implementing OPM R12 in Poultry Processing business, I think option 1 (Create 3 formulas/recipes/batches) is more appropriate. In my case we are using actual costing (Moving Average) as a costing method.
I have set the profile option GMF: Cost Allocation Factor Calculation to be "Dynamic" to calculate the batch cost allocations as a ratio of actual quantity of each product produced to the total production batch output quantity and I have used OPM Financial Cost Allocation process to allocate GL expenses on different products based on Fixed percentage % according to product "value" where Filets has a return more than wings.
Can you please share your knowledge in this business area and confirm to what extend my approach is correct ??
Thank you and best regards
Mamdouh Ragab

Whether OPM Process Execution module supports Continous Manufacturing

HI all,
can any one tell me whether OPM process execution will support Continous Manufacturing ( like fertiliser, Oil & gas, petrochemicals) industries.
My doubt rise because in process execution we are using Production batches concept( in which material is allocated to the batch). so this is batch process.
then how to go with coninous process?
similarly, one more doubt is there.
im developing a new product in laboratory. am i able to produce or manufacture that product ( for my development purpose) for lab purpose. This industrially termed as Pilot plant trial?
pls help in resolving these issues?

Hi Karuna
1. Yes it can be implemented but in batch mode. You will have to break the continous process into batch and then enter the data. This is a kind of workaround but acceptable. I have implemented this in Agro pharma company and they are able to work with this.
2. Yes it can handle lab trails with experimental items and even costing. Please review the oracle site for a data sheet and visit the OPM Self-Study toolkit page on metalink for more
Regards
Girish

OPM Process Execution & Order Management

Hi there,
Can anybody tell me how can I release sales order for a specific OPM batch (Make-To-Order Approach). In other words, How can I assign the batch number in the sales order transaction in order to make a relationship between batch and sales order ??
Regards

dear frnd
While set up in MPS where in Schedule form select Make to Order as " Include Sales" Order then u see, once u perform MRP run u may get sales orer number, provided if u include you sales order as demand.
Navigation: OPM all/Process Planning/MPS/Set up/Schedule ( For declareing you Make to order as Include SO)
Let me know on this.
Hope ur in 11i
Regards
Raj
Mahindra Satyam

OPM process execution process parameters takes too long time to complete

PROCESS_PARAMETERS are inserted every 15 min. using gme_api_pub packages. some times it takes too long time to complete the batch ,ie completion of request. it takes about 5-6 hrs long time ,in other time s it takes only 15-20 mins.This happens at regular interval...if anybody can guide me I will be thankful to him/her..
thanks in advance.
regds,
Shailesh

Generally the slowest part of the process is in the extraction itself...
Check in your source system and see how long the processes are taking, if there are delays, locks or dumps in the database... If your source is R/3 or ECC transactions like SM37, SM21, ST22 can help monitor this activity...
Consider running less processes in parallel if you have too many and see some delays in jobs... Also indexing some of the tables in the source system to expedite the extraction, make sure there are no heavy processes or interfaces running in the source system at the same time you're trying to load... Check with your Basis guys for activity peaks and plan accordingly...
In BW also check in your SM21 for database errors or delays...
Just some ideas...

Oracle Process Manufacturing Process Execution Cycle

Hi I am new to OPM and looking for an overview of how OPM works.
I have searched but could not find any specific document.
If anyone is having or knows the process , Please share it.
Thank you in advance..

Hi;
Please see:
Information Center: Oracle Process Manufacturing [ID 1393312.2]
http://docs.oracle.com/cd/E18727_01/doc.121/e13652/T321962T321965.htm
http://docs.oracle.com/cd/A99488_01/acrobat/115gmepeapiug.pdf
http://docs.oracle.com/cd/A85683_01/acrobat/gmetrm.pdf
http://oracleappscommunity.com/oracle/blog/955/oracle-process-manufacturing-process-execution-tables/
Also see:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
For r11:
http://download.oracle.com/docs/cd/A60725_05/r11_doc.htm
Regard
Helios

Use web service to invoke a new process execution

Hello,
I'm using BPM 10g3, and i'm trying to invoke a fully automated process via a web service
I've setup my web service http://<host>:<port>/albpmServices/<engine name>/ws/<process name>ServiceListener?wsdl
I've accessed it from a C# application i wrote and visual studio did identify my functions and such.
I can successfully start a new session (startSession(string password ,string username) and i get a sessionID back) with the web process.
but when im trying to invoke my own function (which is defined in the Process web service as a Process Execution on my beginIn parameters) I get a response with a FaultException with no visible error code.
In the BPM log I can see the folloowing lines:
1) Invoking service with id:<Process Name>ServiceListener
2) Executing item: IMMEDIATE Inst [-1, -1,-1] Act [No activity] Proc [No Process] Due 1318860646000000]
3) TransactionAction: Rollback!
while the TransactionAction: Rollback! means that something bad happened, i cant see the reason.
any idea's?

OK i've got it working.
I did all the things you suggested before but when you said i need to see that the right activity is being started i understood what's wrong
The chosen activity must be in a lane with the same role as the user login in to the session.
So i added a role on Begin and created a participent for that role, logged in with it and now it works =)
Edit: I'm the same guy that opened the threqad, just needed to make a new user for enterprise support (didn't get to use that though)
Edited by: 891957 on 23:59 17/10/2011

Process execution engine execution error. from the latest HF in BPM Ent.

Hi All,
After applying the latest hotfix, I'm now getting this error when trying to launch any of the application.
My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic.
I've tried redeploying all the deployments within Weblogic and also the Admin Center. Nothing has worked.
Any idea what's causing this?
Process execution engine execution error.
Caused by: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
fuego.papi.impl.EngineExecutionException: Process execution engine execution error.
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:158)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
at $Proxy154.runGlobalActivity(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.lang.NoSuchMethodError: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
at BT_QW.MyProcess.Default_1_0.Instance.writeObject(Instance.xcdl)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
at fuego.server.ProcInst.getComponentData(ProcInst.java:780)
at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2793)
at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.createInstance(JdbcProcessInstancePersMgr.java:1018)
at fuego.server.persistence.Persistence.createProcessInstance(Persistence.java:669)
at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1810)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2708)
at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:3450)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1000_WLStub.runGlobalActivity(Unknown Source)
at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
... 39 more

I ended up rebuilding my ALBPMDir and ALBPMEngine schemas and WebLogic server domains from scratch. When executing the process that was giving me a headache, all of a sudden I got the following error:
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 16538, whereas the maximum size is 16384. This occurs with instance '
Anyway, the sizes were not terribly far off, but I doubled the process instance size from 16k to 32k and the error went away.
Something to try on your end, perhaps.
Chris

Is there any way to stop a process execution (all instances)

Hello,
I´d like to know if there is any way to stop a specific process for execution at the engine without need to undeploy it, since we don´t want to loose process instances when we need to start this process for execution latter on.
We have a PRD environment with a lot of processes from different departments (developed by different teams and external suppliers) and a feature for stop a specific process and isolate the environment could be very good to do root cause analysis when issues occurs at the environment.
Sometimes stop a specific process (or some of them) could help in issues investigation that causes the engine to malfunction (lot of audit enabled, some loop bad controlled, lot of concurrent access) but I could not see this option at the webconsole.
In the version 5.7 one EAR was created separatedly for each process deployed and this could be done stopping the EAR created for that process. Anyone know how to do this at version 6?
Thanks

Well the bad news is you are right, there really isn't any way to do this in versions after 5.7
Starting at 6.0 all projects are deployed under the 'engine ear'. So if you stop the engine, you stop all projects deployed.
I'm a little concerned that you are first seeing these issues in a 'PRD' environment, is this something that you could set up in a DEV, or UAT, or SIT, or any other environment (That is built similarly) to recreate the issues? - Then undeploy any of the other projects... and isolate the problem...
-Kevin

Oracle Concepts: Query on SQL Processing (execution in SGA/PGA)

Hi,
I need some clarity on my understanding, suppose there is a query:
SELECT t1.c1, t1.c2
FROM t1, t2
WHERE t1.c3 = t2.c1
ORDER BY t1.c1;User A submits above query and following steps are executed:
Syntax Check -in PGA
Semantic Check -in PGA
Shared Pool Check (unsuccessful) -in SGA
Optimization (Hard Parse) -in SGA
Row Source Generation (Hard Parse) -in SGA
Execution - in SGA?User B submits same query and following steps are executed:
Syntax Check -in PGA
Semantic Check -in PGA
Shared Pool Check (successful) -in SGA
(Soft Parse)
Execution - in SGA?First question (General):
I thought Execution happens in SGA, but sorting, hashing, and/or merging bitmaps happens in PGA (temporary segment) so is it a sub-part of Execution that happens in user's PGA?
Second question (For user B):
Once Shared Pool Check is successful, and plan/data-sets are already in SGA, so sorting, hashing, and/or merging bitmaps will happen on these data-sets in user B's PGA again?
Regards,
Ankit Rathi
http://oraclenbeyond.blogspot.in

OnB wrote:
Hi,
I need some clarity on my understanding, suppose there is a query:
SELECT t1.c1, t1.c2
FROM t1, t2
WHERE t1.c3 = t2.c1
ORDER BY t1.c1;User A submits above query and following steps are executed:
Syntax Check -in PGA
Semantic Check -in PGA
Shared Pool Check (unsuccessful) -in SGA
Optimization (Hard Parse) -in SGA
Row Source Generation (Hard Parse) -in SGA
Execution - in SGA?User B submits same query and following steps are executed:
Syntax Check -in PGA
Semantic Check -in PGA
Shared Pool Check (successful) -in SGA
(Soft Parse)
Execution - in SGA?First question (General):
I thought Execution happens in SGA, but sorting, hashing, and/or merging bitmaps happens in PGA (temporary segment) so is it a sub-part of Execution that happens in user's PGA?The execution happens in the SGA(Buffer cache) but any kinds of such processing like sorting is session specific and that's why it happens in the PGA of that user.
>
Second question (For user B):
Once Shared Pool Check is successful, and plan/data-sets are already in SGA, so sorting, hashing, and/or merging bitmaps will happen on these data-sets in user B's PGA again?Yes.
That said, can you post a link that confirms that the syntax/semantics check happen in the PGA? AFAIK it's not really a part of the PGA because oracle's code itself would store the grammar and would do it .
Aman....

Post Mapping Process Execution

Hi,
I have a post mapping process for a mapping.
The post mapping process gets executed even when the mapping results in an error.
I wanted to know is there any parameter that needs to be set so that post mapping process would be executed only on successful execution of mapping.
The parameter "Post Mapping Process Run Condition" is set to On Success.
Also my Mapping performs Set based Operation
Thanx in advance,
Sourabh

Hello Kishan,
The only way to archieve this currently is to create a super-procedure that calls all your stored procedures in sequence, and use the super-procedure with the post mapping operator.
Regards, Hans Henrik

Remote process execution

I want to send a code snippet, over a Bluetooth connection, from one mobile device to execute it on another one.
How can I do this? Can i send it as a file and execute there? or does it have to be in another format? and how does the execution occur?

I have a query that runs on Host H1 (client host) connecting to a database A running on Host H2 (remote DB Server) and i get this. Its a kind of big query that touches several tables.
ORA-04030: out of process memory when trying to allocate 64544 bytes (sort subheap,sort key)
The same query runs fine if i execute it directly on the DB server (Host H2). I thought there are differences of ulimit between the H1 & H2 hosts that is causing it unable to utilize the local memory. But the same query goes on other DB hosts say Databases B on H3, C on H4, D on H5 etc., No issues with those at all.
All these hosts are of different flavors of UNIX and have different capacities. But H1 is my cental location where the data is being collected and stored for reporting purposes.
Verified all memory parameters such as pga_aggreaget_target , work_area_policy etc., and all look good on Host H2 (which is why the local execution was successful). So, what could go wrong with my remote execution of the same query? Any ideas?please check master note for these errors.
*Master Note for Diagnosing ORA-4030 [ID 1088267.1]*

Owb process execution and alert message

Hi,
Do we have any provision to give an alert message in OWB during or before starting execution a process? If any please let me know.
Thanks
Ram

HI,
There is no such option as of now.
You can maintain your own audit tables and you can register the messages of your processing. Whenever you start process or end process, you can log a record in ur defiend audit tables.
If you want to implement in mappings, you can use premap and postmap operators to log the details.
Regards,
Gowtham.

Time of process execution

What SQL or Linux command will give me the time of execution of a query.
'set time on' does not give me the time the process takes in executing but the time it takes for the information to be displayed on the terminal. setting autotrace on does not show me anywhere the time it took to execute the query, but a whole bunch of other info.
Help would be most appreciated.
null

i need the help from you about running the batch file
my application needs to place some native lib in system32 folder while lonching the application
i thought running the batch file for this problem is right solution
can you give some help how to achive (urls)
regards
konkodi221

MRP Process Execution

Hi,
Please guide me about the following query please:
Does MRP Process consideres the Purchase Requisitions and Purchase Orders in which items (Material Codes) are marked as deleted?
If yes, then please guide me how can i exclude these PRs and POs from the scope of MRP execution for the Materials got used in the PRs and POs.
Thanks and Regards

Hi,
Thanks for your reply please.
But my question is that the Materials are not deleted but their reference in the PRs and POs are deleted i.e. the PR line or PO line in PRs and POs are deleted but still is it possible that MRP considers these Material lines of PRs and POs?
Please guide.
Thanks and Regards

OPM Process Execution

Similar Messages

Maybe you are looking for