OPMN - config IP address / server - 11.1.2.3

Hi,
I have a problem with my OPMN process trying to start on the wrong server, but I cannot locate the xml file that contains its configuration to change the server / ip address, can anyone advise is this different for 11.1.2.3, and if so where / how can I change the server that this process is attempting to start on??
thanks,
Robert.

The OPMN configuration for Essbase is located at <MIDDLEWARE_HOME>\user_projects\<instancename>\config\OPMN\opmn
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Setting up Network Address Server Settings (Static IP)

To be abundantly clear, I do not want to change my Internet Connection Type - its dynamic and will stay that way. I'm not paying my ISP (Time Warner Cable - RoadRunner in NYC) for a static IP address.
I am changing my network address server settigns to disable DHCP, and hopefully assign static IPs to the various comps/devices in my home network. For various reasons (mostly security/ease of use) it would be handy to know my desktop/media center is always (for example) 192.168.1.101, my laptop is always 192.168.1.102, xbox is always...etc etc.
I have DHCP under network address server settings, and attempted to change TCP/IP protocol of my adapters in the comps to static IP (instead of obtain one automatically). I followed the WRT54G router manual whilst doing this. So I inputted the IP for each comp I want to use, 255.255.255.0 for a subnet mask, and the default gateway (in the example, it would be 192.168.1.1, though I want to use a different internal IP address for my network as a security precaution). Now it also wants primary and alternate DNS. TimeWarner won't tell me this information. They say they tell my router it (since its DHCP) and it changes. So...if I want static IP addresses for the devices in my network, I need my router to have a static ip address externally? that means I pay more. Or have I got it wrong? Please advise. I know I could check the router's status page and grab the two DNS servers its currently using, but then when my router's IP and DNSs change due to the internet connection being dynamic, I'd have to go change all the devices in the network (PITA!!). Thank you for your help.

Most ISPs don't actually change their DNSs only the internet IP adress... you can try grabbing those DNS 1 & 2 and set it to your PC. try checking if those will change for verification.
If not, then for primary DNS, use 192.168.1.1 (equivalent for your router so whatever the DNS your router will use, it will just route it. but it doesnt always work), for the alternate DNS: you can use 4.2.2.1 or 4.2.2.2
"a helping hand in a community makes the world a universe"

Get running config to ftp server failed

i has already set every one read and write in folder named tin in desktop in window 7, but still can not create file and write file after using ftp
static ip of network card i set 192.168.1.207 in window 7 connected to one of switchport mode access port in switch
first i use filezilla
as01#copy running-config ftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
Writing as01-confg
%Error writing ftp://192.168.1.207/as01-confg (Undefined error)
then i use tftpd32 , set binding address 192.168.1.207
as01#copy running-config ftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
Writing as01-confg
%Error writing ftp://192.168.1.207/as01-confg (Undefined error)
then i change to use IIS 's ftp, it can upload file by drag and drop , but right click do not have create file
when i see cisco is writing, i do not know whether it is uploading or creating file and write to it

the switch can ping
as01#ping 192.168.1.207
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.207, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
i have tried tftp
as01#copy system:running-config tftp:
Address or name of remote host []? 192.168.1.207
Destination filename [as01-confg]?
%Error opening tftp://192.168.1.207/as01-confg (Timed out)
tried no passive still failed
noc01as01#sh run | be FastEthernet0/21
ip tftp source-interface FastEthernet0/21
conf t
int FastEthernet0/21
switchport mode access
end
sh run | be FastEthernet0/21
copy running-config tftp:
conf t
no ip ftp passive
ip ftp user noc
ip ftp password 123
end
finally i use wireshark to see, there is no ftp protocol connection with my notebook
then off Macfee IPS, firewall,
and filter with ftp in wireshark , there is no ftp show in wireshark

What's the purpose when we config ipv6 address for an interface with 128bit mask

What's the purpose when we config ipv6 address for an interface with 128bit mask?
Thanks

If you configure a loopback-interface you can use a /128 there.
"Normal" interfaces should always use /64 (RFC 4291) while on router-to-router-links you can use a /127 (RFC 6164).
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Per-VRF TACACS config gets "Address already in use" error

I have created a per-VRF TACACS config on a couple of network devices. I can ping the ACS servers through the VRF. TACACS makes the attempt to contact the servers, but the following message shows up in the log when I debug TACACS:
*Mar 11 08:57:38 starts: TAC+: Opening TCP/IP to x.x.x.x/49 timeout=5
*Mar 11 08:57:38 starts: TAC+: TCP/IP open to x.x.x.x/49 failed -- Address already in use
I can't find anything on CCO that references the "Address already in use" message.
Has anyone run into this?

Hmmm...no, the server group is still there. Did you see the other post which describes the bug ID? The link to the bug is:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl45701
Do you get the IP address is in use log message?

ASA 5505 Backup Config to TFTP Server

Is there a way to backup the configuration file to a tftp server? I've tried "copy start tftp" and copy run tftp". No luck, I get an error message. Thanks in advance.

What kind of error message did you get?
ciscoasa# write net ? WORD IP address of tftp server and file name :. Place IPv6 address within square brackets.

Data sources (ODBC) config -MS SQL Server linking

OS -WS2008 R2-64
I realize that the problems I'm experiencing are not one’s everyday’s activities and are falling quite astray of the regular Oracle dba work.
There is no other place to post but here as the MS SQL Server forums were not able to provide any solution so far.
I hope somebody could have experienced similar issues and could have solutions or at least to point to the right direction.
The box has a MS SQL Server 2008 that has to be linked with an Oracle 10g database on a different box(SunOS 5.10).
The source for the ODBC drivers supposed to be Oracle Client + ODAC.
The simple scenario of linking SQL Server to Oracle got developed into an ugly battle with Oracle drivers to be recognized by the SQL Server.
Numerous installations-de-installations of the Oracle Client 10g + ODAC and Oracle Client 11 + ODAC led to nowhere.
The major points of failures are:
1. The OracleMTS Recovery Service gets broken and can not start - the installation of ODAC fails.
Following the Metalink: Recreating Oracle MTS Recovery Service [ID 836137.1]
fails even with domain admin account - "access denied".
2. In case when the Oracle Client + ODAC get a successful installation:
- no effort could make the oracle drivers to ne recognized by the SQL server.
Even with config of Data Sources (ODBC) and successful connection test against the Oracle databases -> there is no way to have the oracle OraOLEDB.Oracle listed in the SQL Server dropdown window with available drivers.
3. Data Sources (ODBC) - fail to initiate reporting bogus reasons.
As there are 32 and 64 bit of applications (ODBC Managers) and corresponding – or not – drivers------ there is a reportedly confusion over the forums which drivers are for which OS.
The bottom line is – linking fails (something I have done successfully before).
I have the feeling there is something wrong with our environments, but have no way to prove it.
I’m posting with a little hope for help.
Thx,

WS2008 is 64 bit
MS SQL Server 2008 is 64-bit
Solaris is 64-bit
Oracle is 64-bit
Oracle's OLE DB - as OraOLEDB.Oracle
or Microsoft OLE DB Provider for ODBC Drivers (MSDASQL) .
The road block is that I can not configure a Data Sources (ODBC) - System DSN with any of OraOLEDB.Oracle or MSDASQL because they are not listed on the list of available drivers!!!!
Source for OraOLEDB.Oracle has to be the Client11g - ODAC installation. - at no avail
Source for MSDASQL should be the OS by itself as the driver is built in. - at no avail
(the SQL server recognizes the MSDASQ - listed under Linked servers providers).
As per the information from Microsoft and other forums - the mess is based upon 32 - 64 bit applications and drivers; on the way the installations were done.
Even the server administrator advises for a new installation.
Thx,

Local Account can't connect to address server

Hi there, since a few days my addresses and calendar are not synced anymore. I found out, I can't connect with my local accounts to my local mac os x server mavericks on the same machine anymore. The same days I changed something on my security and firewall settings, maybe there is a problem. Anyone knows, what I have to do, please?
The following error messages are printed in console log:
04.08.14 05:09:22,738 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] Unable to find additional info dictionary for key: /principals/__uids__/E276D199-408C-44EA-AA27-9AA0142D3B47/
04.08.14 05:09:23,283 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] Unable to find additional info dictionary for key: /principals/__uids__/E276D199-408C-44EA-AA27-9AA0142D3B47/
04.08.14 05:09:23,284 com.apple.preferences.internetaccounts.remoteservice[27121]: [CardDAVPlugin-ERROR] No 'AddlInfoKey' present to save: {

Now I have the first Part of the solution. First I had to empty the Folder ~/Library/Caches/ . Than I deleted the File ~/Library/Preferences/com.apple.internetaccounts_old.plist . Not sure, the last one is necessary. And third step was, I recreated the accounts from inside iCal and the Address Book.
But now I still can't connect from my iPhone to the Server... Any suggestions?

Xdo delivery config file: unknown server elements

I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.

I am working on XML Pubisher for E-Business Suite version 5.6.3 with the EBS Bursting integration patch.
I have created a xdodelivery.cfg config file to include a IPP printer definition:
<config xmlns="http://xmlns.oracle.com/oxp/delivery/config">
<servers>
<server name="fb" type="ipp_printer">
<uri>http://vumc-pr01/printers/FB-PR17/.printer</uri>
<authType>basic</authType>
<username>***</username>
<password>***</password>
</server>
</servers>
</config>
In my bursting control file I use the printer name ("fb") to deliver the bursted output to.
Unfortunately the bursting request produces the following error in the log file:
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:servers
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:server
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:uri
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:authType
[080508_015652533][][STATEMENT] ConfigReader: Unknown element:username
[080508_015652534][][STATEMENT] ConfigReader: Unknown element:password
In the manual it was clearly stated that the element <servers> <server> etc could be used to setup a printer definition.
Anyone any idea what goes wrong here?
Thanks.

Sg200 firmware 1.3.2.2 - how do you config new dhcp4 server feature?

The release notes for the 1.3.2.2 firmware (7/29/13) notes major feature added is "dhcp4 server" (page 8)
I've read the the administrator manual for this release (78-21139) and can not figure out how to configure the dhcp4 server. I'm not even sure I'm understanding the manual correctly. Starting on page 60 it dicusses uploading a dhcp server config file. I'm not aure that concerns the new dhcp4 server function.
Does anyone know how to set up and configure the new dhcp4 server function in the sg200 switches. Thank you for any help.

You may be right.
I downloaded the release notes from the sg200-26 firmware page: http://www.cisco.com/en/US/products/ps11229/prod_release_notes_list.html
The actual release note links is: http://www.cisco.com/en/US/docs/switches/lan/csbss/sf20x_sg20x/release_notes/R_1.3.2_RN.pdf
Since I downloaded from the sg200-26 firmware page, I assumed the release notes were for sg200 switches. After reading your post, I note the release notes are for 200, 300 and 500 switches. Page 8 of the release notes added dhcpv4 server feature. I did think it strange a level 2 switch (mac based) would have a level 3 (ip based) feature. I'm hoping this is included in the sg200 switches.

Email Address Server Timeout

Hi,
I'm having a problem sending email to a single email address from France to the UK.
All other addresses work fine.
The email address is correct (I have tried both writing a new message, as well as 'reply' to recieved mail)
I have tried both html and plain text format.
In each case I receive a 'server timeout' error message 24-48hrs after sending the message.
I have contacted the recipient, and his IT Dept. advised me to contact my ISP who could be blocking their address.
My ISP is Orange, but they have been less than helpful, telling me that Mac mail is 'outside their expertise'.
I am using IMAP mail account, and everything seems OK except for this one email address.
Thanks in advance for any thoughts or advice.

I found the issue. I kept getting 5.7.1 invalid address errors, no matter how I configured things. Then, I removed the smtp username and password and set the receiver to allow anonymous. My error changed to 5.1.0 sender denied. I'm not positive the errors
are accurate, but from that point I knew where the problem was coming from. The only way I could get it to work was to use this format for the smtp username
[email protected] instead of domain\user.

Is it safe to edit /Library/Server/Config/ from outside Server.app?

I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix. Is that safe to do? Will my changes be retained across version updates?

AnalogKid wrote:
I want to add a virtual_mailbox_domains directive to /Library/Server/Config/Mail/postfix/main.cf for postfix. Is that safe to do? Will my changes be retained across version updates?
I've modified that file from the command line numerous times in SL Server in order to make configuration changes that can't be done through Server Admin, so I would expect it to work the same in ML Server.

Config.sh-Admin server directory is created..but manged soa server is not

Hi,
I have installed weblogic and then soa 11g,nowe creating domain using config.sh on shared storage.
@ nodes and binaries are shared for both the nodes(all installation binaries are shared on a common location which is in turn mounted on both nodes).
After running config.sh ,
it says installation sucessful howevr Admin server directory is created..but manged soa server is not getting created.
Plz any body suggest some resolution..vvvv urgent..
Cheers,
Arshi

Hi Arshi,
Start the Admin server and then managed servers and directory should get created.
Regards,
Anuj

Howto config Backup Directory Server.

Now I have primary ids 5.0. I install a backup ids and replicate netscaperoot db. But after i start backup ids console. Host name of ids server in the Admin console change to primary ids and cannot start Directory Server Console.
how to config this solution corectly?

Can you describe in detail what you have done? do you have any instance of directory server running besides o=netscaperoot instance??
If you are trying to configure replication to your backup DS you should not be having any issues.
can you privide errors you might be seeing in admin servers error logs and access logs and also any other error messages.

Where do files in $JDEVHOME\system9.0.3.5.1447\oc4j-config go in server

Where do the files oc4j.properties and the other files found in $JDEVHOME\system9.0.3.5.1447\oc4j-config reside on the server?
thanks
Kalp

thank you for your reply.
I am doing an OA framework customization. Since the files dont get deployed I am trying to place some custom files that the page needs in that folder.. so is the path you provided common for J2EE and OA framework pages?
Also, under the home folder I dont find anything except the users information .. I am new to this .. any guidance wud be appreciated..shud i be looking for j2ee under $ORACLE_HOME?
Kalp
Hi,
OracleAs has a default OC4J instance usually called
"home". In OracleAs you should have a directory
\j2ee\home\config . Its teh directory that should
contain the properties file. Note that no files of
$JDEVHOME\system9.0.3.5.1447\oc4j-config will be
deployed with the application
Frankthank you for your reply.
I am doing an OA framework customization and I need to place some files in that folder.
I am not able to find j2ee folder .. is this under $ORACLE_HOME or is j2

OPMN - config IP address / server - 11.1.2.3

Similar Messages

Maybe you are looking for